User Status History on Device Master Record

Hello experts - I am in the process of investigating a defect and like to see the User Status history on the Device. For some reason the user status history is not part of the change documents maintained on the device. Help!

Hello Mehul
Can you please check the data element of the field. In the further characteristics tab you have a check box to maintain change document. It should be checked. After that goto SCDO Selectobject click generate program if required.
Thanks
Rajat

Similar Messages

  • USER STATUS TABLE FOR ORDER MASTER

    Hi
    Please reply the Data table name for the field "USER STATUS" under control data tab of Order master.
    Regards
    Prakash.

    Hi,
    The statuses for orders are strored in JEST table.
    Regards,
    Eli
    P.S. Please, avoid posting in CAPITAL letters

  • Config User Status to the Equipment Master User Status

    All,
    I created a user status profile and assigned the same user profile to a sales order item category and also an equipment master. I was hoping that when I created my sales order and selected a user status and then saved the order and also delivered and PGId the delivery. I was hoping since it's the same user status profile that my equipment master would get updated automatically but it didn't. Is there anyway to do this that anyone knows of without using a user exit? Thanks for any help in advance.

    Hi,
    For single equipment, there would be "n" number of PM orders. While doing MIGO, PM order status will be changed by automatic. Why do you want to change the Equipment Status? How do you want to change the status. Please elaborate your concern.
    Regards,
    Maheswaran.

  • Deleting user status profile in equipment master

    Hello experts,
    can anyone tell if it's possible to delete a user status profile. Once we used an user status profile in an equipment i cannot find i way to delete or change the profile to another profile.

    Hi,
    You can only change the user status profile in the equipment provided no status value has been set. Once a status value is set (maybe as intital status) the field is closed for input and no change can be made to the profile.
    -Paul
    Please use [Enterprise Asset Management (EAM)|Enterprise Asset Management (SAP EAM); forum for PM/CS specific topics

  • User status profile in Q-info record not updating on UD

    Hi All,
    My required scenario was, delivery of a material from a vendor must pass through inspection series
    u2022     Model
    u2022     Preliminary  
    u2022     Regular delivery 
    For that,
    1). Maintain different inspection types (with corresponding task list usages) and create inspection plans with these usages.
    2). Maintain the corresponding status profiles for the object type QINF and assigned inspection type to each status in 'SM30 - V_TQ32A'
    3). Assign this status profiles in the quality info records for the relevant materials, vendors combination.
    My problem is while GR against PO, inspection lot for the goods receipt is created automatically and system selects the inspection type as assigned to next status, BUT, When Quality person make a UD to inspection lot, the system NOT sets the next status in the status sequence i.e status not updating on UD. And even when UD is done for the existing lot system not allow for GR of next lot. 
    Kindly let me know where I am wrong.
    Regards,

    Hi,
    The problem is due to missing authorization object :B_USERSTAT".
    Assign this authorization object in your id/role and give necessary values in the fields (activity, authorization key, object category and status profile) and then carry out the transaction again.
    Thanks
    SUMIT.

  • Equipment master : user status

    Hi,
    Where do I get to see USER STATUS of an equipment master.
    Regards
    nandini

    Hi,
    When you open equipment master on the header below description you have status available. There you will find a symbol i in Blue color, when you select this icon it will take you to another screen where on left side you can see System status and right side you can see the User status.
    You can assign the user status profile to the equipment category level. or if any user status profile's are declared for equipment relavent in configuration then you can select the same by going to the screen as mentioned above.
    Hope it's helpful.
    Regards,
    N.Nagaraju

  • Delet Material Master Record but not the range

    HI experts,
    I have more material master records in production data base; now i need to delete them but at the same time don't remove the range numbering.
    I.E.
    there are 10 master record with range number from 1 to 10.
    now, deleting these 10 master records, i would like to avoid that the numbering starts from 11.
    thanks in advance
    C.

    Hi Jurgen,
    I've gone through the data archiving project in the past. I was actually hoping I don't have to go through this big exercise for this minor situation.
    The storage locations in the SAP system are fine. The problem is that when I came in to this organization, I found out that the procurement users have accidentally extended material master record to those storage location irrelevant to them. Those users don't post any stock to those accidentally extended storage location. They admit that it was a mistake. So, I don't really have to do stock movement or GI out from those affected storage location because there's nothing in them.
    Now that I've initially flag for deletion (MM06) of those mistakes done by those procurement users over the few years counting to 2000+ material master records affected. But the standard behavior of the SAP system allows change to proceed in MM02 except for that warning message MM081. So, I was actually asking around to explore if there's actually an option to make it an error prompt instead and stop the whole change process at MM02 transaction level.
    If I may re-confirm, what I've done so far via flaging for deletion of material master record at storage location level - is this the only correct solution available?
    Hope this clarifies my intention of opening this thread. Sometimes, users are quite tough in accepting the results from standard SAP system behavior.
    Thanks for the time in explaining.
    Steven

  • Material Master Record - How to remove or delete storage location

    Dear all,
    Is there a way to remove or delete a storage location accidentally extended via MM01 due to extending the general plant view?
    I've tried the following:
    1. I've used MM06 to flag the particular storage lcoation for deletion. However, when go to MM02 and select the plant view, the storage location that already been flag still exist for selection. I only get the warning prompt "The storage location has been flag for deletion".
    2. I tried MMSC attempt to delete and I get either messages with different material master record:
    a) "Material not fully maintained for this transaction/event"
    OR
    b) "Storage location 60BF already exists and cannot be deleted"
    P/S: If this question has been asked before by others, please point me to that thread.
    I'm grateful for any suggestion. Thanks.
    Steven

    Hi Jurgen,
    I've gone through the data archiving project in the past. I was actually hoping I don't have to go through this big exercise for this minor situation.
    The storage locations in the SAP system are fine. The problem is that when I came in to this organization, I found out that the procurement users have accidentally extended material master record to those storage location irrelevant to them. Those users don't post any stock to those accidentally extended storage location. They admit that it was a mistake. So, I don't really have to do stock movement or GI out from those affected storage location because there's nothing in them.
    Now that I've initially flag for deletion (MM06) of those mistakes done by those procurement users over the few years counting to 2000+ material master records affected. But the standard behavior of the SAP system allows change to proceed in MM02 except for that warning message MM081. So, I was actually asking around to explore if there's actually an option to make it an error prompt instead and stop the whole change process at MM02 transaction level.
    If I may re-confirm, what I've done so far via flaging for deletion of material master record at storage location level - is this the only correct solution available?
    Hope this clarifies my intention of opening this thread. Sometimes, users are quite tough in accepting the results from standard SAP system behavior.
    Thanks for the time in explaining.
    Steven

  • Controlling system statuses in user status

    My 1st question is user status is assigned to master data or transactional data?
    Once User status is set as "Completed" after order TECO, can we  set that business transaction "Revoke Technical completion"
    can not be carried out (Forbidden) in this user status ?
    Suppose after time confirmation I want to use some user status and then do the teco,is it possible and how to do it?
    Where is the authorization code used in the user status defined?

    1) Is user status is assigned to master data or transactional data? It can be both
    2) Once User status is set as "Completed" after order TECO, can we set that business transaction "Revoke Technical completion"
    can not be carried out (Forbidden) in this user status ? Have a look in TCode OIBS to check
    3) Suppose after time confirmation I want to use some user status and then do the teco,is it possible and how to do it? You can set user and system statuses independent of each other
    4) Where is the authorization code used in the user status defined? Have a look in TCode OIBS
    PeteA

  • Update termination Error : Maintain Output device in User master record

    Hi All,
    For transaction IW32 when print is given we have getting Update termination error : Maintain Output device in User master record.
    I have set the user_settings = Space, for output_Options passed the output device . Even for control_paramters I have passed the device while calling the Smartform . However there is no use. Still I am getting the update termination error.
    Please let me know how to solve this issue. Any OSS Note is there for this.
    Thanks in Advance!
    Regards,
    Preethi G

    Hi,
    Thanks for the reply. There is no problem in the print program .
    In the user master record , if the output device is not given and in the print program if we pass the output device. the error is coming.Is there any way to solve the issue at the print program level with out maintaining the user master.Please let me know.
    Many Thanks!
    Regards,
    Preethi G

  • RSCCUSND (CUA: Distribution of User Master Records)

    Hello Techi!
    Good Day!
    I have successfully configured CUA in SAP Production landscape. All
    functions are working fine, except RSCCUSND (CUA: Distribution of User
    Master Records).
    I have created the test user in Central system and for child systems as
    well with different roles, now I want to synchronize user master record
    and Roles from Central system to child systems.
    I executed the report RSCCUSND from the central system, selected the
    required receiving System, Selected the user "test", select all the
    options from Distribution list and execute it.
    In SCUL I am getting "Distribution Unconfirmed" status for the said
    user, as well as the user status is as it is in SU01 (both in child and
    Central system)
    I am using ECC6 SR3, SAP_Basis release 7.
    Pls. advice how to resolve it .
    Regards
    Saqib Ayub

    I think you missed the concept a bid:
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/bf/b0b13bb3acd607e10000000a11402f/frameset.htm
    Normally with CUA you can only assign profiles in the maser.
    Can you check this page again?
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/48/b1b13bb3acd607e10000000a11402f/frameset.htm
    then
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/cc/50b43be7492354e10000000a114084/frameset.htm
    In the child there should be a X un table USBAPILINK ( this will avoid creating users in the child system)
    RSCCUSND you normally don't have to use: this is if you by accident loose you master and you have to send some data again
    Also read this: http://www.sdn.sap.com/irj/sdn/crphelp#section17
    Good luck
    Edited by: Nico Bresseleers on Nov 19, 2009 7:22 AM

  • Create the user master records using the Enterprise Portal

    Hello gurus!!
    I'm configuring SRM 7.0 with EP.
    I'm configuring the organizational structure, and steps guide (pdf and Solution Manager ) are:
    1. Go to transaction SU01 and create an ABAP User. (SRMADMIN)
    2. Assign this user the administrator role /SAPSRM/ADMINISTRATOR
    3. As the administrator, creater the organizational plan
    4. Create the remaining organizational unit
    5. Using the Enterprise Portal application, Business Parter:Employee, create the user master records for the departmental managers.
    How I must create the user in Enterprise Portal? What user I have to use to log on in the Enterprise Portal application? Has the user to be integrated in the organzational structure??
    Thanks in advance!!!!
    Best regards.
    Maria.

    Hi,
    You can create users in WebDynpro application. You can also create users in USERS_GEN transaction.
    Regards,
    Masa

  • Creation of HR master record For a user when a time entry role is added

    Hi,
    Description summary:Automating creation of HR master record For a user when a time entry role is added to a user account
    Description detail:When time entry role is provisioned to a user account,the HR master record is linked,It is compleated after a user is created because a user id must exist .
    It is part of the record.In addition the user must be hired into SAP in order for the HR Master Record to Appear in SAP.
    What we need to do is when a 'Time and Personal Data Maintainer Role "is Added by the VIRSA_ADMIN user,automate the creation of the HR Master Record.
    Transaction code :SU01 to add the role to the Account.
    How to Create the User Exists For this Request…Its very urgent pls help me on this.
    Thanks.
    Vipin

    Why do you need a User Exit? You can create a BDC on PA40 & kick it off upon adding the role..
    ~Suresh

  • Automating creation of HR master record for a user when a time entry role

    Hi Abapers,
    We need an automated solution for the creation of the infotype 105 based on the addition of the time personal data maintainer role into an SAP user Account Master Record(PA30).
    Is it asking to add authorisation objects which would allow the user the time data, may be it is talking about 105 as user data is maintained in 105.
    For this requirement what I am going to do.Plz help me for this and how we can give authorization setting for a particular user plz send me some document.
    Thanks
    Sridhar.A

    Hi,
        You can create a BDC on PA40 & kick it off upon adding the role..
    Regards

  • SAP R/3 Mass User Master Record Update

    I am currently involved in a project to update specific fields of the User Master Record for all applicable records from an external source.
    For the mass change i was thinking along the lines of CATT, BDC/ABAP or Table Changes. Obviously table changes was out first because of the dangers of causing inconsistencies among the SAP standard tables. CATT i think is not really made for this purpose but could probably do the job, and BDC or ABAP is probably the right way to go.
    Any suggestions/comments?
    Thanks

    hello Ashley,
    All 3 options are good.
    I personally use CATT for this purpose however it depends on what your trying to update. SU10 is another option but its drawback is that you can use only 1 value at a time. In CATT however you can use different values for different users. Also time involved in creating CATT tool is very less.
    Obviously you have options like BDC/LSMW and ABAP also with you.
    Regards.
    Ruchit.

Maybe you are looking for