USER STATUS TABLE FOR ORDER MASTER

Hi
Please reply the Data table name for the field "USER STATUS" under control data tab of Order master.
Regards
Prakash.

Hi,
The statuses for orders are strored in JEST table.
Regards,
Eli
P.S. Please, avoid posting in CAPITAL letters

Similar Messages

  • Inactive user status profile for order

    Hi All
    In CRM quotation, the initial user status 'Quotaion created ' is active.Now using a BADI on customer expected price mismatch I am adding 'price mismatch' user status.Requiremnt is I need to have one user status active at any instance. I am trying to inactive the 'Quotaion created' status but not able to. I tried using CRM_STATUS_CHANGE_EXTERN,but not successful. Can anybody please help..
    Regards,
    Sai Prasad

    When you activate another user status the revious should be set to inactive by standard. You can have only one active user status, while on other hand you can have several active system statuses.
    If you use function CRM_STATUS_CHANGE_EXTERN to set new user status, the current user status wil be automaticaly set to inactive. If you test it from se37, don't forget to use also BAPI_TRANSACTION_COMMIT.
    Regards.

  • LSMW for changing user status on work order(IW32)

    Hi All,
    I have created a LSMW for changing user status on work order using transaction IW32. It does not change the status when i run the LSMW. In the recording for the LSMW, i select the radio button on the user status i want to select.
    When i run the LSMW in the foreground, it does everything except select the correct status.
    Is there a way to fix this or is it a problem with LSMW. I'm using ECC6
    Kind Regards
    Emanuel

    Hi ,
    I am not sure whether it would work with LSMW but if your on ECC 6.00 ,Enhacement Pack 3 then you have BADIs which allow you to make collective status changes in IW38 .The below are those BADIs :-
    BADI_EAM_RIAUFK20_FCODE_CUS1 :Implement Customer Function Code in Order List
    BADI_EAM_RIAUFK20_FCODE_SAP1 :Implement SAP Function Code in Order List
    Else if your on lower version then write up a batch programme which checks the PM Order types with specific status and sets user status using FM STATUS_CHANGE_EXTERN[This is used to set or delete User Status] in SE37 ..
    regrds
    pushpa

  • Set User status of Maintenance order

    Dear All ,
    I m trying to update the user status of Maintenance order via a report .I m using the BAPI "BAPI_ISUSMORDER_USERSTATUSSET" for it.
    Code details are as follows :
    USR_STATUS-STATUS_INT  = 'E0006'      "TJ30T-ESTAT
    USR_STATUS-STATUS_EXT = 'WIPR'        "TJ30T-TXT04
    USR_STATUS-LANGU           = 'EN'.
    CALL FUNCTION 'BAPI_ISUSMORDER_USERSTATUSSET'
                EXPORTING
                  NUMBER   = WA_FINAL-AUFNR
                  STATUS   = USR_STATUS
                  INACTIVE = 'X'
                IMPORTING
                  RETURN   = WA_RETURN.
    Bapi is executing successfully but it is not updating the status when I check it from IW33 .
    Suggest me for it....
    Thanks
    Alok

    Thanks SARAVANAN ,
    I have done the bapi commit . But it have some other problem and now I have done it.
    Thanks  for ur suggestion.

  • How to Set User Status of Sales Order at item level.

    How to Set User Status of Sales Order at item level by default to 'Purchase Req Not Created' (example)while creating order. Please tell EXIT Name to be triggered & Internal table to be populated.
    Thanx,
    Srini
    Moderator message: please do your own research before asking.
    Edited by: Thomas Zloch on Feb 21, 2011 11:19 AM

    Mathew,
    Here is a document that should help you get started on enhancing 2LIS_11*
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c09d5356-d8c4-2d10-8b84-d24723fc1f0a?QuickLink=index&overridelayout=true
    Good luck!

  • Chance user status in sales order VA02

    hi all,
    have any FM or BAPI is available to change (block / release) the user status in sales order change,
    pls note me about this,
    Regards
    Usman

    Hi Aditya,
    thanks,,
    which table and which field need to import in this FM "BAPI_SALESORDER_CHANGE" to change User status (Release / Block) in Sales order.
    Regards
    Usman

  • Object Types in User Status profile for Investment managment

    Is there any one who has idea about what object types should I select in User Status Profile for Investment management . this is very urgent .
    Regards
    Rama Shanker Sharma

    Dear Ram,
    User Status can be maintained in the system as foll
    Maintain the Status Profile first in OK02
    Status no       Status        Short text         Initial status flag    lowest    Highest
    10                  NBU            Not Budgeted             ^                10          20
    20                  BUD           Budgeted                                      10          20      
    in
    Status
    NBU
    maintain the required fields as required by your process requirement
    Material purchase order
    Material purchase requisition
    Partially release project
    Release etc
    and define each line item weather it should be No influence/Allowed/Warning/Forbidden/No Action/Set/Delete
    Repeat the same logic for
    Status
    BUD
    I hope this solves your problem, if not please write in detail your requirement.
    Regards,
    Vikat Verlekar

  • Automatic Selection of  "User Status Profile" for Inspection lot

    Hi all,
    I have created "User Status Profile" for particular plant to block UD if Results are not recorded ; I want this 'User status profile' to be selected automatically in record usage decision screen - qa11 of inspection lot .Please let me know how to go about this?
    Thanks
    Veeresh

    You can call the inspectiion whatever you want up to I think 6, (maybe 8) characters.
    You can use 04pppp where pppp = your plant ID.  So 041000, 042000, 042010, 043000, 043140, etc...
    In the insepction type setup in the material masters you can set the inpsection type you want to use in that plant as the "preferred" one by checking that box in the inspection setup in the material master.
    FF

  • User Status Profile for Notification PM

    Dear Masters,
    I know the steps to create the user statuses and user status profile for notification but I want a brief description on maintaining the user statuses. Can i have any document that can explain me the user statuses.
    Hope to find the reply soon. Thanks in advance.
    Chin2

    Hi Naveen,
    Thanks for such a valuable reply, this document is very much helpful to me. See the below example i am showing for the status profile i have created
    STATUS PROFILE:  ZP-NOTIF
    Status number        Status     description                                          Init      Lowest       Highest      position     priority
             1                    OPEN       Open Notification                                no        1                   1                 1               1
             2                    RUNG      Equip. Running Condition                    no         1                   2                1               1                
             3                    NRUN      Non-Running Condition                       no         1                   2                1               1                
             4                    CLSD      Closed                                                 no         1                   2                1               1                
    When I am trying to set the first status (OPEN) to the notification, it works fine but even after I am assigning the order to this notification, put notification in process, assign equipment I cannot set the next status (i.e., RUNG) it is showing me the following error:
    "Status RUNG is not allowed (QNF 100000000000) "  -> -> 
    Diagnosis
    The user status 'RUNG' has reference number 02.  In the current object status 'QNF 100000000000', the reference number of a status may not be higher than 01.
    Procedure
    You can only set user status whose reference number is not higher than 01.
    please help me solving this question its a bit urgent.
    Thanks once again for your replies.

  • Remove the user status in Sales order

    how to remove the user status in sales order header? could you give the function module or BAPI to get this?

    Hi,
    You Can try this-
    BAPI_SALESORDER_CHANGE,
    FM 'I_CHANGE_STATUS'
    Regards,
    Sujit

  • Query ---  to find all child tables for a master table

    Suppose i have a table master .
    I want to know all tables which are child tables for this master table .
    In other words i want to know all those table names which have foreign key constraint for the master table .
    regards
    shubha

    You may want to join on the owner in case you have multiple schemas with same table names and same primary key names
    SELECT c.table_nameFROM all_constraints c, all_constraints p
    WHERE c.constraint_type = 'R'
    AND c.r_constraint_name = p.constraint_name
    AND p.constraint_type = 'P'
    AND c.owner = p.owner
    AND p.table_name = '&YOUR_MASTER_TABLE'

  • User status transfer for sales orders from ECC to CRM

    Hi,
    We use business process with CRM sales orders that are transfer to ERP.
    Users can change user status in the sales orders in ERP.
    How we can replicate custom user status from ECC Sales Order to CRM Sales Order?
    What is the steps to do this for CRM 7.0?
    Denis

    Hi,
    We are creating quotation ZPQT in CRM which is then get replicated to ECC on saving it on “Accepted” status. In ECC we then create sales order of type ZPOR. Sales order gets replicated in CRM and also updates document flow. This sales order is called as “Project Sales Order”. PS team assigns WBS element to this order and does billing later on. Upon billing document is created sales order status in ECC changes to “Completed”. This is system status. But the issue is status of order ZPOR is CRM remains in status “Inprocess”. We want it to change to “Completed”.
    We have similar scenario with order type ZOR. In this order after delivery and billing ECC assigns status “Completed” to sale order and same gets replicated to CRM.
    In CRM for user status Completed we have assigned system status as FINI. Both ZPOR and ZOR has same status profile assigned at header and item level.
    Our concern is if status is changing back in CRM for ZOR then why not for ZPOR. What is stopping system to do so?

  • Restriction of user status in service order for billing due list

    Dear CRM Experts,
    I have configured status profile for service order as OPEN,INPROCESS and Completed and have assigned this to the service order transaction type.
    Now once i save a service order without errors ,the system is automatically generating abilling document in  billing due list TX:BEA_DL_01 even though the user status assigned to it is OPEN ,INPROCESS AND COMPLETED.
    According to our client requirement ,a billing document has to be created in Billing due list if the User status assigned to it is COMPLETED only.
    Please suggest the solution.
    Bye,
    Madhav

    Hi Nanda,
    As per your last reply, for some Service Orders you are unable to change the Status. Can you have check whether those service Orders are error free?
    Sometimes, when there are errors in service orders or in 1Orders you cannot change the status from In Process or Open even when you have released certain Items.
    Hope this helps.
    Thanks,
    Samantak.

  • EXIT/ BADI/ Enhancement point for User Status change in Order

    Hi all,
    I am looking for an EXIT or a BADI or an enhancement point specifically for user status change in an order thru IW31/IW32.
    I have the exit names for Order PBO, PAI, 'SAVE' event etc. so m not looking for generic answers.
    I have to put some validations for the Order on USER STATUS CHANGE. Let me know if any of u have any pointers on that.
    Thanks and Regards,
    Sonal

    Hi,
    Use this Enhancement IWO10009 and call these function module to change the User Status
    STATUS_TEXT_EDIT --> To Read the existing status.
    STATUS_CHANGE_INTERN_VB --> to change the status.
    Regards,
    Satish

  • The possibility to hide for displaying a user status in work order

    Hello gurus,
    I have following issue:
    It is possible to hide only for displaying a user status in a work order when it's active?
    br,
    Laurentiu

    See my [recent post|https://forums.sdn.sap.com/click.jspa?searchID=25309331&messageID=7376021] which references user-exit STATTEXT.
    PeteA

Maybe you are looking for

  • Unable to open URL attachment from SBWP in CRM WEB UI

    Hello Gurus, Need your help please. I'm having some problem opening the URL attachment from SBWP via CRM 7 WEB UI (I used a Transaction Launcher for SBWP). The attachment is a Webdynpro application.  I am able to open the attachment in SAP GUI, but n

  • Invoice History Report not fetching any data without parameters

    Hi As per user guide, you can run the Invoice History Report without giving supplier parameter. "If you want to submit the report for one supplier, enter the supplier. Leave this parameter blank to submit the report for all suppliers." But when we ru

  • How can I delete unwanted/inaccurate email addresses from the iPhone cache?

    How can I delete old / unwanted / inaccurate email addresses from the "suggestions cache" that keep popping up the moment I type in the first letter in on a fresh email address box? This is driving me mad! The London Store Apple Genius can only sugge

  • PC optimizer came with the download is it safe?

    What should come with the Mozilla firefox download and which weblink is the safest to utilize to download mozilla? I had no problem down loading it in the past had to delete it as it got infected with delta search when I downloaded an update to adobe

  • I need to update adobe, no MBs

    I need to update my adobe flash, but my mac says zero mb's left. Can I delete older adobe flash players, if I can, how do I find the right ones to delete? I need very simple instructions as I am not computer savy, I can follow simple instructions. If