User staus not updating

Hi all,
I have assigned one status profile to inspectioon type04. In this status profile i have assigned two status A & B
When the inspection lot is get generated instial status A is get assigned automaticaly .
Status A ( no usage decision allowed)
Status B ( UD allowed )
But sytem is not updating next status B automaticaly. I have select it manualy .
How to update user status automatically
ASD

Hi shymal,
thanks for rply
What u mentioned is working fine, But i am unable to get exact logic how sytem will update user status .
For example in my case for status B for business transaction
Close inspection complete i activated the indicator 'set'
if u press F1 for this indicator gives messege
"Flag: Set status
Indicator which specifies that the status is to be activated when this business transaction is carried out."
Here i want to ask one question which status will be activated in my case will it B? if i am closing all inspection
Asd

Similar Messages

New users are not updated in Outlook address book (Offline)

Hi All,
We are having an Exchange 2010 environment. from few weeks we are experiencing this issue. When we create new user or change the name of a existing user, it is not updated in outlook address book. Can anyone help me to sort this issue?.
Regs,
Sachitha.

What is the Outlook client you are using? Is it 2003 or 2007+
You are right, you don;t have to update the OAB manually, the kind of issue you are facing is very know (As far as I experienced). After you update the OAB manually, check the issue and it should be fine.
After that create a Test User and check in Outlook if you see it populated.
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Exchange user information not updating from AD

I just recently updated Job Titles, Location, and Phone numbers for users in Active directory. For some reason
not all of the information is be transferred to Exchange. I noticed this because it isn't updating in the GAL either. I went to Exchange Management console and the information isn't there either. I look at AD on that same machine and it's all there. What would
be causing Exchange not to sync this information. How can I check to see what is broken. I'm not really know how this is supposed to work.

First off, Exchange has no directory information of its own - all directory information that it has, it gets from the Windows Active Directory. It will hold permission information for a time period, but no other directory settings are saved automatically.
So if you are changing things in the Active Directory and you aren't seeing it in Exchange, there are two possible reasons: 1) what you are changing in AD isn't the same as what you think you are changing in Exchange, and 2) your Exchange system is reading
from one domain controller and you are making the changes while connected to another (and directory replication hasn't completed). In order to check for #1, you say you changed the fields above - what do you see if you change those same fields on the
Exchange system? Do this on one test account, then open the account in ADSIEdit to see what all of the fields are set to. If the reason is #2, wait 15 minutes and see if the information is updated.
As for Exchange not updating the GAL, the GAL is taken straight from the Windows Active Directory in real time, so we're back to #1 and #2 above - for the most part. However, the Offline Address Book that you see in Outlook is only updated (by default)
late at night and downloaded when Outlook is first opened the next day. So if you are checking for changes in Outlook, Outlook will use the Offline Address Book by default, but you can force it to check with the online address list on a case-by-case
basis by changing the address list. So make sure you are selecting one of the non-default address lists to find the information, not the default.

ERROR VIRSA CC 5.2 - Management View -User Analisys - NOT UPDATED!!!!!

Hi ,
i executed the JOB of SYNK of users, the Job of RISK analysis and the JOB of update of management Report .
When i go in - Management View - User Analisys -( i select date , System , User Group ) Virsa CC shows me the correct number of users actually in the system, for this user group , according to USR02 SAP table , BUT Users with NO Violations and Users With Violations are not correct.
I show results:
No. of Users Analyzed : 25                CORRECT
Users with no Violations : 95 379%     NOT CORRECT
Users with Violations : -70 -279%        NOT CORRECT
The Interactive pie chart shows the correct number of users with violations : 2
Who it' s possible ?
BEST REGARDS
Maurizio

Abdul,
You stated in your initial comment that the Management Report check box was NOT selected? If this is the case then the graphs on the informer tab have not been updated. You must first execute the SOD (user/role/profile) analysis, once that job is complete then execute a separate job for the management reports. This will then update the informer tab (given that your rule set has been updated with your custom functions and risks).

Network User List Not Updating

I manage a lab of ~30 iMacs which are bound to an Open Directory on a G5. The client computers set so that their login windows show only network users accounts in a list. However, they don't seem to be getting the actual list of network users from the server. Rather, in /Library/Preferences/com.apple.loginwindow.plist there is a NetworkUsers array which contains the users listed by loginwindow. No matter what this array is never updated, not since it was originally created it seems. Furthermore, if I delete the plist, loginwindow reverts to name/password fields and never gets the list of network users. Clients can still log in, and MCX settings are updating correctly, it's just that loginwindow can/does retrieve the network users to display in the list. I've tried refreshing preferences, rebinding the computers, changing the computerlist settings on the server, deleting the MCX cache...just about everything I can think of short of clean installing the clients and/or the server (which, ya know, I'd really rather avoid . I've seen several other topics in the discussions that sound similar to mine but all seem to have slight variations and none seem to be fully answered so I'm sure many would appreciate any help on this topic. All of the computers are running 10.4.4.
PowerBook Al 15 1.5GHz Mac OS X (10.4.4)

I had already checked (search based) that as I had that with 10.3 and 10.4 server.
I did however solve it today, but am not 100% sure on what I did.
Here is what I tried.
I was trying to add restart to the applemenu, and did so and the restart appeared, but was then trying to look for ways to remove the logout so as to force the users to restart rather than logout but could not find it. I looked in the forced com.apple.finder.plist which was under the details options in preferences rather than the finder icon, and since there was no key in there I removed it from the computer list prefs and the pupils groups prefs. I then looked at the finder prefs from the icon in system prefs on WGM and noticed that I had blue dashes meaning some set some not. I cleared them be setting them as I wanted and then double checked but noticed they were back to dashes so did them again by doing never then apply and then always and resetting them to as I want (I think that is was I did) and then checked and they were ticked or unticked and no dashes. I then just happened to log on with a client to see if the applemenu was fine and noticed that it no longer showed the restart so had to log off upon which the list appeared.
I think that one of the com.apple.finder.plist in either the group or computer list details prefs was the problem.
I hope that it is okay and will stay like this, until I relook at to why the restart is not happening and knowing sods law will solve that but get no list again.

Login window user list not updating

I have set up a lab of emacs with os x 10.4 server and clients. The login window of the clients dispays a list of users. I added and imported a bunch of users and it all worked fine. I then updated to 10.4.4 and then backed up my server volume.
For some weird reason I can no longer see any additional users that I add in workgroup manager...infact even if I delete users this change is not reflected in the list of users in the login window.
-I have restarted the workstations and the server.
-I have deleted the DirectoryService folder off the client and reset all the Directory settings.
-I have udated the client to 10.4.4.
-I have mucked around with computer management settings in Workgroup Manager.
I am currently out of ideas. I'm not sure if the list of users I am seeing on the worksation is from a local cache or if its getting this bogus list from the server...Is there a cache file somewhere on the local machines that isn't being updated?
Thanks in advance for any advice you can give me cause at this stage I am starting to get a bit worried
Cheers.
eMac Mac OS X (10.4.4)
Mac OS X (10.4.4)

Hi Rob, I think it'll be listed alphabetically, but maybe putting a spave before your name will put at the top- haven't tested it but works with other things within the system.
Cheers.
EDIT
Just checked it works....
Message was edited by: Andbrowny

IMAQ user palette not updating outside video loop

I'm trying to implement a program with a separate video loop and am having issues with changing the user palette. I'm not sure right now, but I think it might be because I'm changing it in another non-video dedicated loop. Does LabVIEW have a problem with copying an image from an IMAQ buffer and trying to simultaneously change the user palette for an image control? My initial guess would be no, but then I don't think I'd be having this problem. Here's a little example of what I mean. Off-line, you can change the image palette to any of the default palettes, but trying to change to the custom user palettes (which do work under any other circumstances) while running video and it does nothing.
Any ideas as to why the property nodes aren't working?
Attachments:
PaletteTest.llb ‏178 KB

dear lanmat,
I may need some clarification on what your application is, and what is not behaving as expected. I'm assuming that by "separate video loop" you mean that there's a secondary loop in your program acquiring video. What kind of video is it acquiring? I also am assuming that your user palette is not being used to effect the video, but another image display entirely, is that correct? I can see some of these in your program, but I want to be sure.
LabVIEW should have no trouble copying from a buffer while changing the image control. Are they for different images or the same image? Also, you say that "off-line" you can change the image palette to any of the defaults -- what do you mean by off-line? Any more specifics you can give me as to your application and what exactly is going wrong would be helpful, thank you.
-Allison S.
Applications Engineering
-Allison S.
Calibration Services
Product Support Engineer

Single user not updating GAL/OAB

Hello there TechNet.
I have a client where one single user is not updating the Global Address List/Offline Address Book. He is not seeing some users, where everyone else in the company is seeing the user. This is specific to his outlook.
I have gone in and looked for *.oab files to delete, so they can be recreated. I did not find any. I probably looked in the wrong spot, but did follow the path:
%userprofile%\Local Settings\application data\Microsoft\Outlook\Offline Address Books\< guid >. Since
I did not find any files, I ran a manual update of the GAL by going to Send/Receive Download Address Book.
When I ran the manual update, I received a sync error. I am now stuck, and all my research describes either the steps I wrote above, or tells how to troubleshoot at the server level. I do not see this as being a server issue, as only the one
user is getting the error. All email comes into this user correctly, so he is connected to the server.
Server is Exchange 2010, hosted onsite. Outlook is 2010 on a Windows XP machine.
I don't know what other information to provide, so please ask if I am not giving something needed to fully troubleshoot this issue.
Thank you in advance for the assistance.

Hi,
In order for some GAL entries to show up properly, we may need to turn off Cached Exchange Mode. Please visit the document on How to turn on or off Cached Exchange Mode for Outlook 2010.
http://office.microsoft.com/en-us/outlook-help/turn-on-or-off-cached-exchange-mode-HP010355560.aspx
In this case, we can simply create a new profile to setup the user's account to see if the issue persists:
http://support.microsoft.com/kb/829918/en-us
If the issue persists, please detail what sync error you received when you ran the manual update.
Regards,
Melon Chen
TechNet Community Support

Shared Services Security information not updating in Essbase

Hi,
I have created few users in Shared Services and performed the sync operation. Created users are not reflecting in Essbase server. why?
Also tried by externalizing the users... performed sync from shared services and refreshed the shared security from EAS console...then also... user information not updating in Essbase?
What could be the reason?

Have you provided Essbase application access rights to those users in shared services?
If not, then try after providing Essbase access to users. This might be the reason for your issue.
Regards,
NitinGupta

Reg : User status information is not updating in Cube

Hi Experts,
I am loading data to INfocube which gets data from sales order ODS and Master data infoobject PROJECT which has project code. User status is a attribute fo Project (Master data infoobject). 1 WEEK before user staus was changed for a particular Project code in source system ECC system .If i display data in Master data PROJECT ,I could able to see changed user staus for that particular Project code.
Later data loaded to cube from Master data and ODS.If I select a particular Project code and give a sales document number and try to see user status which got changed ,it is not showing changed User status and values are not showing in Infocube.But when i try for another project code its showing correct User status in INfocube.
Kindly guide me to solve this issue.
Thanks in advance!

ACR for Master data load was happend already and we can able to see changed user status in Master data.
But we are unable to view user status ,SALES document values for that particular project code. Sales document is extracting from ods.

HR PA and Planning (PD profile) changes not updating auth profiles of users

PROBLEM:
We are on ERP version 6 since 2008. We started experiencing this problem December last year and now it is all over our system. As soon as employees are transferred or new appointments are made in HR on PA or if the PD profile is changed in planning the changes cannot be seen by the user in their auth profile. The user can literally not see the newly appointed employee on the org structure or even newly created org units and positions are not visible. When RE_RHAUTH00 is run on the user name the update indicates that the changes (new employee and new org unit) is linked.
The following updates run every night: RHPROFL0_DAILY_UPDATE and RHUATUPD_NEW. I have also run PFUD during the day to make sure all updates go through. We have also "played" with some profiles with PD profile changes but it is as if the profile remains completely static. We have looked for personnel lists and deleted them to no avail. Our Basis administrator has cleared the buffer for us and has run report RSUSR405 that did not do anything. We have searched through notes on Support packages and have just loaded and tested support pack 46 to 53. The only work around seems to be to delete the user and create a new user and then it seems to easily accept new changes.

Hi,
Yes, please make it scheduled background job. This is normal procedure.
Define periodicity on your business needs: some run it every night, some every hour.
Cheers

When the user press the button Calculate Tax (see attached doc) and click on Tax details then this should be updated automatically. But it does not work it is empty and the user has to update manually.

When the user press the button Calculate Tax and click on Tax details then this should be updated automatically. But it does not work it is empty and the user has to update manually.
All setup looks fine.
Please let me know what can be done on this?
Regards,
Peu

HarryAustralia wrote:
I recently updated my ipad wifi only to the new ios 6.1.2 and initially I had the auto cover lock option which can be seen in the Generals tab, but then it stoped working!! Before the update, the auto cover lock worked fine. So after trying all the options, I then did a complete reset on the ipad and now its gone all together from the General tab!! I can no longer see the "auto cover lock" option.
The iPad cover lock is for when you use a cover with magnets in it to lock and unlock the iPad when you close the cover or open it. Try running a refrigerator magnet along the sides of the iPad and see if that trips the iPad Cover Lock back into the settings.
That is not the same thing as the iPad Auto Lock setting which allows you to set an allotted time before the iPad goes to sleep.
You can try resetting all settings to see if the Auto Lock feature retinrs to the iPad.
Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. This can be a little time consuming re-entering all of the device settings again.

User profile service not updating 'Title' in user information list

Hi,
In our SharePoint farm, following two user profile sync timer jobs are successfully running but not updating the 'Title' in the hidden user information list.
User Profile to SharePoint Full Synchronization
User Profile to SharePoint Quick Synchronization.
Can someone point me to the right direction? Please note that I don't want to use powershell script shown here to update the 'Title' in the user information list -
http://blog.falchionconsulting.com/index.php/2011/12/updating-sharepoint-2010-user-information/.
Thanks,
Manvir
Manvir

Hi,
There are two jobs, User Profile to SharePoint Quick Sync and User Profile to SharePoint Full Sync, that synchronize the User Profile database information with the user information list. Sometimes this stops working (properly) and in that case
you need to run:
Stsadm.exe –o sync –listolddatabases 0
Stsadm.exe –o sync –deleteolddatabases 0
The first command will display all the databases and when they have been sync’d last.
The second command will delete the records corresponding to those databases (it doesn't delete databases/end user data).
Anyways, running this will basically tell the timer jobs that they have never sync’d and force them to carry on as if it’s the first time.
Go to Central Admin and fire off the User Profile to SharePoint Full Synchronization
job.
For detailed information, refer to the following article:
https://donalconlon.wordpress.com/2012/03/02/sharepoint-user-information-list-is-not-being-updated/
Best Regards,
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

User Settings Are Not Updated

Hi,
I have an issue regarding updation of user data (e.g. telephone) in its Web Settings.
Once I update the data through 'Settings'in Web GUI, I get a message as successfully saved & changed. However
on rechecking the data it is still not updated
Similarly if I change the data through SU01 it is not being reflected in Web GUI.
We are using SRM 5.0 classic scenario
Is there a way to synchronize SU01 & Web Settings data?
Kindly suggest a solution for the same.
Regards,
Pratyush

Hello,
In the "Manage User data" transaction we have 2 different sections
"User account" which corresponds to SU01 data and "Position" which
contains the relationship address. So the phone number you maintained
in the position section will be not transferred to SU01.
Only the fields available in the "User account" section will be
transferred to SU01.
Kind Regards,
Edel.

User Profile email address not updated on Site Collection User Information

Hi All,
Ok here we go....SharePoint 2007 with SSP profile sync not enabled, however I have a few profiles I need to update (email address). This has been completed by editing the user profile in SSP, but when viewing the information via Site Collection >
People & Groups > User Information "Work E-mail" is still showing the old one.
All alerts are still being sent to the old email address, SSP DB UserProfile_Full shows the new email address as per SSP.
Anyone know where else user profile emails are stored which is used by Exchange?
Many Thanks, Roger

As per the following post from GuYuming
http://social.technet.microsoft.com/Forums/sharepoint/en-US/319d5b0e-336a-4815-9ee5-5d1685db867f/how-to-send-sharepoint-alerts-to-users-on-different-domain?forum=sharepointadminlegacy
After the email address in SharePoint user profile is updated to [email protected], you have to wait until
they are synchronized into the user information list in SharePoint site collections so that alert can be sent to that address. For detail, please read http://vspug.com/mirjam/2009/06/17/user-profiles-and-the-user-information-list-or-userinfo-table/ and http://blogs.technet.com/paulpaa/archive/2009/10/01/user-profile-information-not-updated-on-site-collection-s-people-and-group.aspx
--Cheers

User staus not updating

Similar Messages

Maybe you are looking for