Userexit while/before save adrc-data

Hi there!
I need a common userexit to save additional data each time anywhere in the system adrc-data is saved.
This can be a changed or new adress data if there's a new customer as well as there's a new built in equipment for example.
Is there such an always valid userexit for saved adrc-data?
I've found the SZRS0003 (adress check interface for external components). Could this be a solution in my case? What i have to do in this case... Do i have to switch on the external adress check anywhere?
Thanks in advance for any help.
Cheers, Ingo

Hello Ingo,
regarding the interface of that exit i would not expect that.
There is a BADI called 'ADDRESS_UPDATE', which might be more helpful.
Also see OSS-Note 176559.
Regards
Wolfgang

Similar Messages

  • General userexit before save of adrc-data

    Hi there!
    I need a common userexit to save additional data each time adrc-data is saved.
    This can be changed or new adress data if there's a new customer as well as there's a new built in equipment for example.
    Is there such an always valid userexit for saved adrc-data?
    I've found the SZRS0003 (adress check interface for external components). Could this be a solution in my case? What i have to do in this case... Do i have to switch on the external adress check anywhere?
    Thanks in advance for any help.
    Cheers, Ingo

    Hi!
    I've moved this question to the enhancement-section 'cause i think it's better there
    Cheers, Ingo

  • How can read BOM component date before save the production order??

    Hi Experts,
    In our company, we need to develop a program to read the BOM component data of the production order
    before we save the production order.
    That for example ,when we create and release a production order , before we save the production
    order,we want a porgram to read the BOM component data. If some component data can meet our
    requriement (may be if there is material requirement quantity>100 EA),then the system will pop up a
    small dialog box to remind us.
    There is user exit PPCO0007 and PPCO0007.But it seems they only can read the head data of the
    production order before we save the production order. And the BOM component data of the production
    order are saved in the RESB(Reservation Table).So if we do not save the production order,all the BOM
    component data are not saved in the RESB table.
    So how can slove the problem??
    How can read component date before save the production order??
    Are there any other user exit we can use???

    Hi Just wanted to check am I right that you are trying to check if you have enough Materials Available before you release or Save the order right ? if this is your business objective then when you create order you have material availability tab which checks and gives error if shortage is there. Please let me know if is this wht you asking for ?

  • HT1320 how can i save me data stored on a non responding ipod classic and says you need to format before using it?

    how can i save me data stored on a non responding ipod classic and says you need to format before using it?
    in another way : how can i save my date stored on my classic iPOD as a external hard .... when that msgs appears .... volume doesn't contain a recognized file system , make sure the file system is loaded .... then , you need to format ??? can anyone help ?

    It sounds like the iPod's storage has data corruption.  You may be able to treat it like an external drive and use data recovery software on it, but it probably won't work because the system is telling you that the drive needs to be formatted before it is recognized.
    If the problem is data corruption and there is no hardware-related problem on the iPod's hard drive, a Restore should fix the problem.  But this will obviously erase the iPod's hard drive.

  • HT5567 Do I need to save anything data (apps, photos, video) before I proceed the update? I am on iOS5.1 using ipad2

    Do I need to save anything data (apps, photos, video) before I proceed the update? I am on iOS5.1 using ipad2

    Be more precise, updating from iOS 5.1 ---> iOS 6

  • How to save the data in form before submit to sap backend

    Hi experts,
                 i have to create one form . In this form i have to save the data and that form should sent to another person  to submit it in to sap back end. is there any possiblities to create form like this...
    Please any one help me...

    Hi Himanshu
    I already searched but no use... can you recollect once and help me..
    Regards
    Sharada

  • Is it possible to save game data (e.g game scores) on your PC before you erase all data on iPod Touch

    I am about to erase data on my iPod but I've got some good scores on games like a mean 29,825,006 on Temple Run and will I be able to save this data over to my PC?

    - Make sure that you make a backup.  The first step of a sync is a backup.  The backup contains app data like saved games. To check, go to iTunes>Preferences>Devices and look for the backup and its date.
    - Just restore the iPod from that backup and you save games will be restore too provided that the apps are in the iTunes library since the backup does not contain apps and some other stuff.

  • How can I save first data before data logging in a regular period?

    Hi,
    I need some help to see what's wrong with my VI. I want to save the first data when I launch my VI until reach the first minute, after I want save data minute by minute, but in this fisrt period my VI does't save this data in the .lvm file.
    Could someone help me?
    Thanks.
    Attachments:
    savefirstdata.vi ‏76 KB

    Thanks MoReese, but I can't open again. Well, I think I figured out what you have said last post and it worked fine, I will attach the new VI. So, I got another question right now. Why when data acquisiton has start collecting data with timestamp after some time it's incremented 1 second in the time stamp inside the lvm file or same in txt file? I'll attach the file to exemplify.
    Thanks for the responses.
    Diego 
    Attachments:
    savefirstdata3.vi ‏53 KB
    incrementsecond.png ‏19 KB

  • Error While Uploading GL Master Data in LSMW

    Hello Experts,
    I am running into error while uploading GL master data in LSMW, I created recording through FS00, then I mapped the fields, it all went good till 13th step, but last step got stuck(Run Batch Input Session), when I am running batch input session, system is showing this message "Function Code cannot be selected"
    Your help would be highly appreciated.
    Regards
    Muhammad Yousuf Ali
    SAP FI Consultant

    Hi,
    first can you pls check your Hierarchy mode setting in FS00 -  before executing Batch input session -
    Open FS00 - go to settings - and Do not display navigation tree select radio button and save it
    then Now Run fresh LSMW - your issue will resolve
    Mahesh

  • Need userexit while saving the billing document (VF01)

    HI Folks,
    I need a userexit while saving the VF01 transaction code. My requirement is i need to check if there is any intercompany invoice was created before the delivery related invoice
    By default SAP creates delivery related invoice . I have checked lot of userexits with package VF but none is working and also gone through the standard userexits RV60AFZ*, still didn't find any good one for my requirement..
    All your help is highly appreciated..
    waiting for your replies.
    Regards,
    raj

    Hi,
    I have done some analysis before posting the question and one mistake i done is i have checked theUSEREXIT RV60AFZC and i checked XVBRK AND XVBRP instead of VBRK and VBRP...also whie saving this  is not called, it is called when we press enter and also when we press SAVE button in the initial screen.
    I missed the small thing...
    Thanks for the link..
    Regards,
    Nagaraj

  • I bought my iPhone 5 almost an year ago and since the last 2 weeks my battery lasts about 2 hours or less, while before it lastre a whole day. Can anybody tell me why is this happening or how can i solve my problem, please? Thank you.

    I bought my iPhone 5 almost an year ago and since the last 2 weeks my battery lasts about 2 hours or less, while before it lastre a whole day. Can anybody tell me why is this happening or how can i solve my problem, please? Thank you.

    You can follow these steps to save battery.
    1. Turn on Auto-Brightness - The iPhone has an ambient light sensor that adjusts the brightness of the screen based on the light around it (darker in dark places, brighter when there's more ambient light) to both save battery and make it easier to see. Turn Auto-Brightness on and you’ll save battery because your screen will need to use less power in dark places.
    Find it in the Settings app -> Brightness & Wallpaper -> Auto-Brightness On
    2. Reduce Screen Brightness -the brighter the default setting for the screen, the more battery it requires. Keep the screen dimmer to conserve more of your battery.
    Find it in Settings -> Brightness & Wallpaper
    3. Stop Motion (iOS 7) -It's really cool, but it also drains battery. You may want to leave it on to enjoy the effect, but if not, turn it off this way: 
    Settings -> General -> Accessibility -> Reduce Motion -> move slider to green/on
    4. Turn Bluetooth Off-  Turn off Bluetooth except when you’re using it to squeeze more juice from your battery.
    Find it in Settings -> Bluetooth -> Move Slider to Off
    5. Turn Off Location Services -
    This allows your phone to know where you are and give you exact driving directions, give that information to apps that help you find restaurants, and more. But, like any service that sends data over a network, it needs battery power to work. If you’re not using Location Services, and don’t plan to right away, turn them off and save some power.
    Find it in Settings -> Privacy -> Location Services -> Slide to Off
    6. Don't Automatically Update Apps (iOS 7)-
    If you've got iOS 7, you can forget needing to update your apps by hand. There's now a feature that automatically updates them for you when new versions are released. Convenient, but also a drain on your battery. To only update apps when you want to, and thus manage your battery better:
    Settings -> iTunes & App Store -> Updates -> move slider to off/white
    7. Auto-Lock Sooner -
    You can set your iPhone to automatically go to sleep – a feature known as Auto-Lock - after a certain amount of time. The sooner it sleeps, the less power is used to run the screen or other services. Try setting Auto-Lock to 1 or 2 minutes.
    Find it in Settings -> General -> Auto-Lock -> Tap your Preference
    Few more things that would consume battery even when not is use are the applications that run in background.
    Follow the below steps to quit all running applications.
    1) Double tap on the home button on the iPhone ( this will display all apps that are running in the back ground).
    2) Just click on the tiny red X to quit application ( if iPhone is running on iOS 6 and below) else just swipe yhour finger over the running app upwards to quit ( if running on iOS7).

  • How to validate plan data before saving the data

    I have a total row in my planning layout which is a summation of plan data in 2 other rows. While saving the data, I should check whether the total is 200 and if not the data should not be saved. How can I achieve this! Any help would be appreciated.
    Regards,
    Tipo.

    Hi,
    I'm also facing the same problem in my development...I tried above all the ways,but we cannot stop saving the wrong data.In this case you have to write the java script for save button, before saving the data if it is correct then go for the next step to save other wise throw an error message or without save the data .
    You need to write the JAVA script for save button,in this code you need to read the data form the layout and check the total value, i am not sure if layout is dynamic how we can achieve this???.
    My development also stopped for this issue,In my case i  have two layouts ,one is for actual and another one is for Planing layout(Function - Distribution equally),using the fox code i succeed to read and throw an error message for incorrect data but i can not stop to saving for incorrect total data.
    Once you solved this problem please post the message in SDN.This type of requirements is very tough and we need to share to our friends.
    Thanks.

  • Busted mac - how to retrive and save my data?

    Hi Hope someone can help -
    My Mac has gone belly up recently. It starts up in the grey screen with an apple logo and a spinning disc before moving onto a blue screen (with occasional spinning wheel). I can move the mouse cursor in the blue screen.
    Note - There is only 7gb of free space left on the hard drive.
    I’ve tried many different options to get back into the mac including –
    1. Trying to boot into safe mode – fails to do so.
    2. Tried holding down the S key while booting up – no joy here either.
    3. Holding down cmd-S to get into the UNIX command line – this was successful and I can see all my files and directories.
    4. Cmd-C and running from the original OS-X install disc. From here I was able to run the disc utility but it reported no problems with the hard disc. I can also see the various files and directories from here. But I cannot see any way to copy/save my data using this option.
    It’s been reported elsewhere that the above problem might be caused by the logic board failing, so re-installing the OS may be pointless, correct? And anyway a full re-install will wipe all my data. So at this point it looks like saving my mac might be a wasted effort, so my main emphasis is now on retrieving my data.
    Perhaps someone might be able to help with the following (I’m fairly comfortable with using UNIX, but not an expert).
    1. Could I copy the necessary files onto an external hard disc using Unix CP command if I simply attached another external hard disc to the mac?
    2. Or could I simply cp my files to an external DVD re-writer drive from the UNIX command line? If so what would be the command to do so?
    3. Any other options/suggestions?

    Hi, I hope we can help as well.
    Okay so your first concern is your data. Go and purchase an external hard drive that is at least twice as big as you think you will need. We'll use it to 1) Create a boot disk and 2) Put any data you can save in a safe place. After we are done, you'll use this external hard drive for backing up your data on a regular basis, so you won't need to worry about this nearly as much again. If you really want to be safe, get two external drives and back up your backup.
    Boot the iMac from its install DVD. Use *Disk Utility* to format the external drive. Install the OS on it. Restart, booting from the system on the external drive. Copy your data from the internal hard drive to the external. You can use the *Migration Assistant* (in /Applications/Utilities) the UNIX cp command, a program called Carbon Copy Cloner, or any of several other methods. At this point you can also use the Finder to make a copy of critical files to DVD(s).
    Once you have your data safe, shut down the iMac and disconnect the external hard drive. Reboot starting from the install disk again. Use the installer to do an *Archive and Install* of the operating system, preserving user and network settings. See [this article|http://support.apple.com/kb/HT1710] for further information about A and I.
    If the Archive and Install works, you should be able to restart the computer and have it be working again. Reconnect your external hard drive and use it with [Time Machine|http://www.apple.com/support/leopard/timemachine> to maintain current backups for the future.
    If all of the above fail, let us know, we'll keep working with you.
    Best of luck.

  • How can i save differnts data in the same file?

        Hi all,
    i need some help.  I'm working  on a project  for students an th university. We have to devellop  a programm for LEDs measurement so that all the measure data must be save in de same file.  We have develloped the programm, but we have  a big problem to save the measure in the same File.
    When we do the first  measure , the file must be created and the fisrt data gonna be save in this file that is correct
    When wie do the second measure, the third  ....  measure, the programm ask us to comfirm the file or where we want save our data
    We need some help, to know how we can change  or devellop this programm so that, for the first measure , the file must be created and the fisrt data gonna be save in this file,  the second measure the same file must be chose and from the third and more the measure data must be automatically save in this file without the programm ask to chose or to confirme a file? 
    I attach a part off this programmm
    Thanks
    Attachments:
    SR830DSP19.vi ‏212 KB

    Move the "File Dialog" where you open your new file out of the while loop. Only pass the refnum inside the loop.

  • Re: Satellite A210 - Can't boot and how can I save my data?

    Hi, after installing some spyware software on my vista A210 (spysweeper) I rebooted my laptop, on the restart it went straight to the boot manager and instructs me to insert my recovery disk and follow the instructions effectively. The only options I have with this disk is to format my hard drive, it seems to indicate that it will erase everything (would that include things on my partitioned drive?).
    Is there no way to start the PC in safe mode? I have tried using the F8 key, but could only get to the safe mode menu using the recovery disk to boot my machine. So when I selected start windows in safe mode it loaded the disk instead.
    Does this sound like a familiar problem, if so does anyone know how I can restore last weeks settings without accessing windows?
    Will I have to swallow it and format my drive, on the partition I have some photos, etc that I haven't backed up yet from a trip last week so I only want to do this as a last resort?
    Would I be able to go and buy a copy of vista and fix it via the CD? My laptop came with windows vista installed but no windows disk.
    Any help is much appreciated!
    Thanks.

    If you are not able to go in the advanced boot menu by F8 you can’t start in safe mode. This is fact.
    I think the only way is to reinstall Vista.
    The reason why the laptop came without installation disk is because on the HDD is on the second partition an folder called “HDDRecovery”. This folder contains the factory settings and you can restore it if you go in the advanced boot menu, repair my computer and then you can select the Toshiba recovery function.
    Furthermore you always get a reminder message that you should burn this image on a DVD:
    +Important INFORMATION+
    +your system is equipped with hard disk recovery system. if you need to repair+
    +your computer by restoring it to original factory state, you can do it directly+
    +from harddisk (press F8 when you boot your computer, choose "Repair your computer"+
    +and follow the menue instructions) or create a bootable Recovery Disc Medium for this purpose.+
    +Toshiba recommends you to create Recovery Disc Medium using the "Toshiba Recovery Disc Creator" to ensure+
    +hat you are able to restore your computer to the original factory installed state, even if your computer+
    +gets seriously damaged+
    However, now it’s too late to burn the recovery disk.
    In your case I would order a recovery disk from Toshiba directly. Then you can reinstall the notebook and the Toshiba disk contains already all drivers and tools.
    Here you can order it: [https://backupmedia.toshiba.eu/landing.aspx]
    If you use the Toshiba recovery disk the whole HDD will be formatted. You should backup your data before you do this.
    For this you can buy an external HDD case. Remove the HDD from the notebook, put it in the case and connect it to an other PC or notebook. Then you are able to save your data.
    I hope I could help you.

Maybe you are looking for