Using different resolutions on ACD 20 and 30 inch monitors

I have a Mac Pro with dual monitors. One is the 30 inch ACD and the other is the 20 inch ACD. They are being run off an ATi 1900XT for the 30 and the Nvidia 7300 for the 20. I really want to put the desktop on the 20 inch monitor and run my games on the 30. When I set it up this way the resolution for the games is limited to what the resolution is set to on the 20. Is there a way to do this or is it just a limitation of the OS? Any help would be appreciated.
Thanks,
J.C.

If mirroring is off, there is nothing in OSX limiting the resolution on the 30" display. The problem must be in the game. If you only have two displays, try removing the 7300, and put both displays on the 1900.

Similar Messages

Using different templates for the desktop and phone versions of the same blog

I have a site which was created in Adobe Muse and is hosted on Business Catalyst.
I have created both a desktop and a phone versions of the site.
I want to know how I can integrate the blogs that I currently have on the desktop site with the phone version that I just did, using different templates for the desktop and phone versions of the same blog. This is in order to ensure that visitors to the blogs on the website are directed to the templates that render correctly for the devices they are using.
My current approach has been to create both a desktop and phone versions of the blogs. The problem with this however, is that the dates are different and the comments are separated between the two blog versions!
I have also tried enabling mobile templates in BC, but still couldn't find a way to specify the mobile versions of the templates for the same blog?
To recap my problem, I basically need a solution where the same blog uses different templates for desktop and mobile (both templates use different navigation headings and menu styles)
Thanks.

There can be few reason for this, including page contents links or contents used in phone/tablet version.
Please provide the site url , also try to publish the site as a trial site in Business Catalyst with all layouts which would help to isolate the issue.
Thanks,
Sanjit

Incomplete use of display area of external 21.5 inch monitor (1920x1080)

Attaching an external monitor (LG E2211S. 1920x1080, 21.5 inch) and adjusting the resolution for this display to 1920 x 1080 while keeping the labtop display in function as well, results in a wide black rim around the desktop area on the external display.
How to use the whole screen area without reducing the display resolution? I am running Win 7, 64
Is the INTEL HD Graphics 3000 to blame?
I update the driver form the toshiba site, trying both version 8.15.10.2353, and .15.10.2509, same unsatisfactory result. There is no way to manually enlarge the display are with buttons, the automatic positioning does not change this situation. The same screen on an older desktop ran well when updating a driver.
When investigating a driver update from the INTEL site a warning appears stating that the manufacturers drive may e=have additional functionality, which should not be replaced.
This should just work, what is wrong?

How to use the whole screen area without reducing the display resolution? I am running Win 7, 64
What settings did you choose?
Extended desktop or clone displays?
I use extended desktop and I could set different resolution for internal display and external monitor.
The built in display supports an resolution of 1366x768 and scaling is set to Scale Full Screen.
The external monitor support the resolution of 1920x1080 and scaling is set to Maintain Display Scaling.
Everything is OK

Print a graph when used different resolutions

Hello,
my LV programm
(using V8.5.1) must run on computers with different resolutions (1024x768,
1280x1024...), so I used the option
"new scaling of all frontpanel elements after changing the windows size" (free translating )
(German: "Alle Elemente des Frontpanels bei Änderung der Fenstergröße neu skalieren")
in my VI.
This works fine but now I have some trouble with the printout of a graph.
Depending of the selected resolution of the computer, the graph will be printed complete or only partial, then the lower part of the graph is missing.
To print out the graph I used the VI "Append Control Image to Report.vi"
Can anybody help me?
Gruß
jan91

Hello Jan,
you are right - when printing the report in landscape orientation, images will be cropped if higher than the paper size.This issue has already been reported to our LabVIEW R&D team (#36511) and should be solved in a forthcoming update of the report generation toolkit. In my opinion, the issue is linked to the problem that the image will not fill out the report page completely to the right margin (#36926), another nuisance you might also have encountered.
I have created a workaround for the problem, which you should find attached to this post. As you change the graphs background color for printing, I added another property to resize the graph to the maximum printable size (evaluated here in trial&error, depending on your printer, the maximum size might change a bit), and another one to restore the original size when the report is done. To reduce the "blink time" of the graph, I placed the restoring property node directly after the control image has been attached to the report, so that during printer initialization, the original layout is already visible again.
Hopefully, this is acceptable for you, until these issues have been fixed.
Best regards,
Sebastian
Attachments:
print graph (modified).vi ‏44 KB

How to use different mail address in "from" and "user" property?

I'd like to use the user enter mail address as the "from" property and use my mail account to send it, but I got error: com.sun.mail.smtp.SMTPSendFailedException: 553 You are not authorized to send mail, authentication is required when set different mail address in "from" and "user" property, how to resolve this problem?

Basically that's a bad idea. Suppose you used your server to send messages that claimed to come from "[email protected]"? Naturally enough people have tried that, either as a joke or as an attempt at fraud, so that servers will check to see if the message is coming from the server it claims to be coming from. And if it isn't -- as in that example -- it will consider it a forgery. Best case (for you) is that the server will flag it as spam or junk. Worst case is that your server will be blacklisted and other servers will ignore it.

Use different DPS accounts for iPad and Android versions of same app?

Hi there,
When creating an Android version of an iPad DPS app should the account used to create the content (the 'Title ID' in the DPS App Builder) be the same for both versions, or different? In the content viewer I know that iPad content will show up even on Android, so I'm thinking that the answer is probably no, but I haven't managed to find it mentioned in the Adobe docs.
Thanks,
Toby

It depends, but usually the answer is that you want to use a different account for iOS and Android. Not all features supported in the iOS viewer are supported in the Android viewer. For example, if you use panoramas or iOS-specific web views in your articles, you'll want to be able to use different content for the Android viewers. Search for "dps supported features" for a comparison chart.
I use different Application accounts for my apps. I use the Share/Copy feature to transfer the folios from the iOS account to the Android (or Windows) account. Then I delete the few articles that don't work well in the viewer and replace them with articles generated from different source files. That works well and doesn't require too much extra effort.
If you want to reduce the amount of letterboxing in Android viewers, you'll definitely want to use different accounts and use, for example, 1280x800 folios instead of 1024x768.

Problem using different Adobe accounts for CC and Typekit

I've had a Typekit account for some time and just recently signed up for CC. Both my Typekit and CC accounts use different Adobe IDs. I then linked my Typekit account to my CC account to enable font syncing, only to discover afterwards that apparently this is a thing you should not do.
Now when I log in to Typekit, all of my previous sets are gone and it acts like I'm a brand new Typekit user. Is it possible to unlink my accounts and get all of my sets back like I had before?

Hi Eric,
I'm sorry that you ran into trouble with this. Would you please email us at [email protected] with your Adobe ID and the email address that you use for Typekit?
Most likely you have set up a new account as part of your Creative Cloud subscription, and the kits are still there under you previous email. We will take a look and let you know what needs to happen to get this sorted out!
Thank you,
-- liz

How can I handle deploying multiple test systems on the same PC that have been developed using different versions of LabVIEW, TestStand, and/or Switch Executive?

The major issue here is that the test systems must be documented and validated before being released to the production floor. Given this if a test station has multiple test systems deployed on it that have been developed on various versions of LV, TS, and Switch exec how can I force the test system selected to use the correct versions of TS, LV, and Switch exec.? I understand that the solution would be to recomplie everything and bring them up to the latest version but that would then require re-validation according to the QA department. Any advice would be greatly appreciated.
It would be nice if theTS deployment was more like an LV executable... meaning when a LV executable is launched it always knows what LV runtime engine to use when there are multiple engines installed on a PC.

Hi,
Multiply versions of teststand can reside on the same system, but only one version can run at a time. They is a utility that has to be run to set the active version.
The SequenceFiles have a version number, and you will find an error will be generate if you try to Load the sequencefile in the wrong version of TestStand.
The labview VIs will only work providing the correct version of the RTE is also installed on your system, even a labview executabe requires the correct RTE to be installed, either as part of the executable installation or as a seperate installation, before the labview exe will work correctly.
I'm not fimilar with the Switch exec but I would expect that it will also require the correct lower level device drivers to be available for the version you are using.
Therefore, as you are indicating that some of your system are at a older version, its difficult to image how you could achive this, considering if you say you have different versions of the software(s). For a start, you may have the problem that newer code/ sequencefiles using additional functionatily not available in the older versions.
I would think your only solution would be to have different deployments covering the different versions you have, or at least bring all your test systems up to the same version of teststand.
Regards
Ray Farmer
Regards
Ray Farmer

How use different languages in the edition and have the grammatical corrector?

Hello,
I am using the "ibook author" to create a magazine with different languages as text, and I would like to know if the program can reconogize the different languages, because it is cutting very bad all the words when it arrives to the end of the parraf.
Please let me know what solution could work for this case.
Thank you very much in advance
best regards
jc9revolution

Works everytime i try
screen shots
new book with basic template.
First add second chapter
then
1) click TOC page tab/button
2) select image drag new image and replace image
3) click second dot to go to next chapter (2)
4) drag in new photo (farmer guy is new photo, replaced b&w flow photo)
now click on frist dot to go back to chapter 1 TOC will be first photo draged in (nycity)

How can i use different suffix for read-only and read-write?

I have a directory server with 11.1.1.5,I have created the root dn:o=test.com.cn. This dn is replication enabled and it is the consumer.
I want to create another suffix:ou=test1,o=test.com.cn and I wish to write some data from own.
However,when I use dscc to create the suffix,I can not find any entry under the suffix.
When I use the command:
ldapsearch -b "ou=test1,o=test.com.cn" -s sub "objectclass=*"
I get this:ldap_search:no such object
I can not import any ldif to this suffix.
I get the error:
import test1: WARNING: Skipping entry "uid=jwalker, ou=People, ou=test1,o=test.com.cn" which has no parent, ending at line 280 of file "/opt/dsinst/test1.ldif"
When I use dscc to change the suffix to rootdn,I get the same error too.
How can i do now?
Thank u very much.

There are a few issues here, ie
"uid=jwalker, ou=People, ou=test1,o=test.com.cn" has no parent.
Did you create ou=People, ou=test1,o=test.com.cn before you tried to create above dn?
Also, your suffix naming is very poor and will result in more problems later on especially since you want to create sub suffices.
you should use the DC notation, ie dc=test,dc=com,dc=cn that way you can easily attach o=test1,dc=test,dc=com,dc=cn
This way you would be able to keep your separate suffices inside separate database files and you will have less headaches when you try to replicate and do bulk re-initialisations.

Problems using different tables for base class and derived class

I have a class named SuperProject and another class Project derived from
it. If I let SchemaTool generate the tables without specifying a "table"
extension, I get a single TABLE with all the columns from both classes and
everything works fine. But if I specify a "table" for the derived class,
SchemaTool generates the derived class with just one column (corresponds
to the attribute in derived class). Also it causes problems in using the
Project class in collection attributes.
JDO file:
<jdo>
<package name="jdo">
<class name="Project" identity-type="application"
persistence-capable-superclass="SuperProject">
<extension vendor-name="kodo" key="table" value="PROJECT"/>
</class>
<class name="SuperProject" identity-type="application"
objectid-class="ProjectId">
<field name="id" primary-key="true"/>
</class>
</package>
</jdo>
java classes:
public class Project extends SuperProject
String projectSpecific
public class SuperProject
BigDecimal id;
String name;
tables generated by SchemaTool:
TABLE SUPERPROJECTSX (IDX, JDOCLASSX, JDOLOCKX, NAMEX);
TABLE PROJECT(PROJECTSPECIFICX)
Thanks,
Justine Thomas

Justine,
This will be resolved in 2.3.4, to be released later this evening.
-Patrick
In article <aofo2q$mih$[email protected]>, Justine Thomas wrote:
I have a class named SuperProject and another class Project derived from
it. If I let SchemaTool generate the tables without specifying a "table"
extension, I get a single TABLE with all the columns from both classes and
everything works fine. But if I specify a "table" for the derived class,
SchemaTool generates the derived class with just one column (corresponds
to the attribute in derived class). Also it causes problems in using the
Project class in collection attributes.
JDO file:
<jdo>
<package name="jdo">
<class name="Project" identity-type="application"
persistence-capable-superclass="SuperProject">
<extension vendor-name="kodo" key="table" value="PROJECT"/>
</class>
<class name="SuperProject" identity-type="application"
objectid-class="ProjectId">
<field name="id" primary-key="true"/>
</class>
</package>
</jdo>
java classes:
public class Project extends SuperProject
String projectSpecific
public class SuperProject
BigDecimal id;
String name;
tables generated by SchemaTool:
TABLE SUPERPROJECTSX (IDX, JDOCLASSX, JDOLOCKX, NAMEX);
TABLE PROJECT(PROJECTSPECIFICX)
Thanks,
Justine Thomas
Patrick Linskey [email protected]
SolarMetric Inc. http://www.solarmetric.com

Using different hierarchy in a query and last value error

Hi guys,
there is a hierarchy for customers in the 0Customer Infoobject which I should use in my query.
I have activated the hierarchy in the query and now some results are not appearing but red crosses "x" are shown.
And the error message: The function Calculate Results as ... could not be applied everywhere.
I know that I am using the result as "last value" for some columns because I need them there (for example: to determine the last value for the credit limit of the current month). I think these columns where I am using the last value calculation are only affected.
I mean my query has a lot of characteristics and key figures and I was told that a hiearchy for customers which is available should be used. But now there are these red crosses.
I don´t see any other solution as not to use this specific hierarchy.
Has anybody a suggestion what could be an argument to use or not to use a hierarchy?
Is it sometimes like in my case that a hierarchy is not possible to use?
Thanks in advance!

Hi,
say for example your customer hierarchy is customers grouped under region. You can maintain this region as one of the attribute of customer and you can display this attribute in the report. Indirectly, this will give similar output to that of hierarchy.
But lot depends on how your hierarchy is formed, before commenting whether it can be moved to master data attributes.
Thanks.

Using different machines in package..and what about agents ??

hi everyone ;
first i want to explain my configuration :
we have a oracle datawarehouse on ip:1 unix machine. and our ODI server (and oracle database, i mean our repositories are on this machine not the warehouse )is on another windows machine which ip : 2 ..
and i have a ODI client on my local pc(windows)..
I want to transfer a few txt files from another ftp machine which ip :3 to the datawarehouse ( ip:1) ..and schedule this senario..
about my question :
i can do all of this :
when i'm working with ODI Studio on ODI server machine ( ip :2 ) i can get files from ftp (ip:3 ) to server machine (ip:2 ) (with odiftpget), i can use a package to load data from file to oracle table on the ip:2 machine again..
but i want to do the same things without save files on the ODI server, i want to load data to datawarehouse oracle tables.( ip :1 )
we have a standalone agent on the ODI windows machine (ip:2)
the question is how can i transfer the txt files from 3 to 1 ( from ftp to dataware house ) without saving files in my local machine or ODI server machine.. is that about the agents and do i have to install an agent on the datawarehouse machine (ip :1 )..
thanks ..

ok. thanks . but how can i instal an agent on ip:1 machine... do i have to run odi setup.exe and select just stanalone agent for ip:1 machine after than create an physical and logical agent on ODI studio and select the ip:1 macihes's host and port than start the agent on ip:1 machine ( configure the odiparams etc.. )
or is there an another way ??

Cine 30" raedon x800xt and an addidtional (different resolution) monitor

I have a G5 with a 30 inch cine display and a radeon x800xt video card. I would like to get an additional 19 inch monitor to use as a tool pallate. I am not schooled on video cards, but can I add a second monitor of a lower resolution.....(again i am only using to park tool pallates)....and have the video card recognize two different resolution settings.

The X800 can handle two monitors, with independent settings for resolution. The DVI port can handle a display up to 30" (2560 x 1600). The other port (ADC) can handle up to 23" (1920 x 1200).
If the second display is not ADC, you will need an adapter, either ADC to DVI, or ADC to VGA. (ADC to DVI, followed by DVI to VGA, won't work, because most ADC to DVI adapters don't pass the analog video signals needed for VGA.)

I have just updated my Ipod to the latest ios.(deleting everything) and using different sources to get my music back it seems that every time i select multiple/individual songs on itunes i can change artwork but will not show up on my ipod?

I have a windows 8 computer and have recently updated my ipod to the latest ios and it has wiped my Ipod clean except for my photos. whilst trying to get my music back using different sources like CD's and stuff i cant seem to get any album art to load on my Ipod? I can go on itunes and highlight single/multiple items and change the artwork and my computer will confirm it but when I look on my Ipod it doesnt display any art work or allow me to change the artwork that is already there? i need help please!

Album artwork can be added/changed on songs via the iTunes Get Info menu item from the File menu. Note that music that you loaded from CDs will not have any artwork. If you want to aquire artwork you can try the File menu item Library > Get Artwork or you can download artwork from the internet, etc. Note that just changing artwork on your computer won't affect the iPod until you sync.
If the artwork is correct on your computer iTunes then delete all the music on your iPod by syncing with iTunes with no music selected. Then reload the music onto your iPod by again syncing with iTunes with all the music you want selected.

Using different resolutions on ACD 20 and 30 inch monitors

Similar Messages

Maybe you are looking for