Using locked E72 with car kit

I have an annoying problem with my E72. When my phone automatically locks after 5 min (push from our IT department) I can not use it to make out going calls when using my car kit. I used to be able to do this with my BB bold 9000 but I have been able to figure this out with the E72. I am able to receive calls.
Any suggestions?
Thanks, Rodnag

Hi danny.
Yeah, they're already off.
Basically, every alert is turned off except for incoming calls.
I know i must sound fussy, but when you're listening to music, you don't really want gaps of silence in it, do you?
Steve
Nokia Enthusiast

Similar Messages

Follow path using IP camera with Starter kit 2.0

I am developing a program to follow path using IP camera with Starter kit 2.0. I faced some problems, someone please help.

thiensung92 wrote:
I am developing a program to follow path using IP camera with Starter kit 2.0. I faced some problems, someone please help.
You "faced some problems"...
Without any further information I assume that your computer is unplugged. All fixed. You are welcome!
Obviously we need a LOT more information. We are not going to waste our time guessing when we could be helping others.
Using LabVIEW: 7.1.1, 8.5.1 & 2013

Using Ipod Nano 3rd generation with car kit

Just a simple question... I recently got an 8GB Ipod Nano... want to play it in my car with the Belkin car kit. Even with the volume turned up at max on my ipod I still have to turn up my cd player volume in the car high - is this normal? Also, is FM the best frequency? Confused... just want good quality listening. Thanks

Others have asked this, and the answer I've always seen is no.

Using N78 with car kit CK-7W

Just recently bought the lovely N78 and paired it up with my car kit (CK-7W).
I have the keypad tones switched off when it's connected and i've also set my message alert tone to 'off' aswell.
The reason for this is that i don't like the interruption on my stereo.
Don't mind it when i get a call; i have to turn it off to take the call anyway.
Annoyingly, though, when a message comes through, it mutes the radio for a few seconds.
This never happened with my 6300 - there was no interruption. I was just visually notified on the screen.
Any ideas what could be the matter?
The installation of the carkit is fine, i know that much.
Steve
Nokia Enthusiast

Hi danny.
Yeah, they're already off.
Basically, every alert is turned off except for incoming calls.
I know i must sound fussy, but when you're listening to music, you don't really want gaps of silence in it, do you?
Steve
Nokia Enthusiast

Re: Bluetooth Related Issues with Car kits regarding the Palm Pre Post 1.2.1

Make/Model: Nissan Maxima
Year: 2007
Carkit Model info (Manufacturer, firmware version, etc): OEM with Nav
Details of problem: (e.g. pairing drops, static on the line, buttons mapped incorrectly, etc)
Since updating to webOS 1.3.5, the connect and disconnect problems have mostly gone away! Thank you Palm!
One minor complaint still with Bluetooth (if you are listening Palm): The Nissan OEM kit supports up to 4 phones. I paired my wife and kid's phones to the car, including my Pre. When any other family member is in the car with me with their phone (non-Pre), my Pre will not connect to the car. Their phones connect just fine even though my phone has been paired to the car to be the "primary" phone. Only when I am by myself in the car will the Pre Bluetooth connect/disconnect work flawlessly. Thanks again for getting us this far!
webOS version: 1.3.5

We are trying to collect data for all customers that are having issues related to pairing their Palm Pre to car kits, however this data is spread among tons of threads and many different boards. To resolve this we would like to consolidate this list down to one board and tell you up front what information we need.
If you are having issues around using Bluetooth with your Car Kit please post the information in this thread.
Please also use this template so it is easiest for us to extract this data
Make/Model:
Year:
Carkit Model info (Manufacturer, firmware version, etc):
Details of problem: (e.g. pairing drops, static on the line, buttons mapped incorrectly, etc)
webOS version:
Included in compatibility list:
To find out if your carkit is listed on Palm's compatibility chart see here
http://kb.palm.com/wps/portal/kb/common/article/50373_en.html
Further information:
Please remove all previous pairing from both devices and carkits before deeming it an "issue." We attempt to diagnose and identify all issues, however some issues are simply resolved by removing pairing from both the device and the carkit and then resetting the connection back up.
It may be important to check back regularly. If it becomes an issue that we would like to diagnose further we may ask for help from the community by contributing log files from the device.
You may receive a PM from me or another Palm employee asking for this information (we can be identified by orange logo's next to the name).
Message Edited by HardBeatZ on 01-19-2010 02:36 PM

TomTom GPS app with car kit

I just found out that the TomTom car kit has GPS hardware in the mounting bracket and that it will enable original iPhone users to have GPS functions using their original iPhone.
The ad copy says it will "enhance the gps capabilities of the G3 iPhone." Does that mean that the original iPhone won't work as well with the TomTom, or that the gps in the car kit takes over and is better than the one built into the iPhone?
Anyone using the TomTom app and kit with an original iPhone? Does it work well?
I've got a TomTom One GPS, but if I can get GPS out of the iPhone, it's one less gadget to lug around.

The TomTom Car Kit for the iPhone is compatible with:
iPhone
iPhone 3G
iPhone 3GS
Requires iPhone OS 3.0 or later
http://www.tomtom.com/products/section.php?ID=939&Section=766&Lid=1&Category=2
I use mine with a 3GS. Where I used to get periodic GPS dropouts, the car kit has eliminated them.
TomTom also also sells a separate car kit sized for the iPod Touch (which has no built-in GPS).
It should work fine with your original iPhone. Here is a YouTune video of an original iPhone using a Car Kit (the audio is in German). http://www.9to5mac.com/tomtom-iPod-touch-original-iPhone
Here is another video of the iPod Touch using the Car Kit: http://www.youtube.com/watch?v=WMGfin40t3w&feature=fvw

Bluetooth Related Issues with Car kits regarding webOS post 1.4.0.

We are trying to collect data for all customers that are having issues related to pairing their Palm Pre to car kits, however this data is spread among tons of threads and many different boards. To resolve this we would like to consolidate this list down to one board and tell you up front what information we need.
If you are having issues around using Bluetooth with your Car Kit please post the information in this thread.
Please also use this template so it is easiest for us to extract this data
Make/Model:
Year:
Carkit Model info (Manufacturer, firmware version, etc):
Details of problem: (e.g. pairing drops, static on the line, buttons mapped incorrectly, etc)
webOS version:
Included in compatibility list:
To find out if your carkit is listed on Palm's compatibility chart see here
http://kb.palm.com/wps/portal/kb/common/article/50373_en.html

Make/Model: BMW 325I
Year: 2006
Carkit Model info: Latest firmware for the 3-series.
Details: Will not connect with bluetooth carkit. Both bluetooth and Pre discover each other but does not connect with each other. The Pre shows that its connected with the car but the car does not connect to the phone.
webOS: 1.4.0
Included in compatibilty list: Yes
It connected and paired up fine before the update to webOS 1.4.0, had no issues with 1.3.5.1. The phonebook functionality also worked fine with the previous version of WebOS

Compatibility with Car Kit (CD-IB100 II Adapter- Pioneer)

Hi, ive recently purchased a new ipod nano but ive been disappointed to find that it is not compatible with my car kit adapter, however the car kit is compatible with previous versions of the ipod.
Can anyone advise if there is a possiblity of a compatibility connector that can be purchased to resolve these issues?
Regards
http://www.pioneer.co.uk/uk/products/25/38/301/CD-IB100%20II/specs.html

I use the same adapter, had the same issue with my iPhone.
The adapter is using the old way of charging which is the Firewire pins but all iPods from about 2007 all charge with the USB pins only.
I did a search on the web and found a little converter you plug between the iPod and the cable which enables charging. There are different versions if you search, some also remove the not compatible message from the screen.

Using ipod nano with car

I just received a new ipod 16gb, which has a new charger. How can I use this in my car, which has ipod connectivity using the old plug? How can I use it in my skullcandy speakers, which use the old plug?

As long as your headset is 3.5 mm jack, you can use it with your ipod. Same goes with an auxilliary cable to your car if it is not bluetooth enabled.

6280 not working on holder CR-43 with car kit CK-7...

I had a car kit/holder combination installed Sept 2006, been working fine.
Last couple of days when I insert the 6280 into the holder the "PHONE" text displays on the stereo like normal but the "HANDSFREE" settings on the phone don't kick in.
The CHARGE function continues to work but the "PHONE" word/display never dissapears and the radio/stereo function never returns.
The phone does not operate correctly, it remains on what ever profile is active and the phone only works on its internal speaker, losing connection with the car speakers.
Anyone know if this is the handset? car kit? holder? all of the above?
Don't know where to start!
Tim

Just for the record, I managed to isolate the problem today to a fault with the CR 43 holder.
I plugged the car kit lead directly into the phone handset and found that the car kit functions returned to normal, charging and sound through car speakers and interpution of stereo functions when making and receiving calls.
new holder then!

Lock E72 with password?

Is it possible to lock the keypad on a nokia e72 with a password? Like on HTC touch phones and such

Yes, you can lock the keypad. On your E72, go to
menu > control panel > settings > General > Security > Phone and Sim card > scroll down to kaypad auto lock period > you can set the keypad lock period from here.
You can also lock the entire device from "Phone Autolock Period"

Next G models compatible with car kits and antenna...

Help!
I currently have a CK-7W car kit with a soon to be obsolete 6235 CDMA handset. I am frustrated by the lack of quality handsets available on Telstra's new Next G service. The current 6120 Nokia only has bluetooth connectivity and no patch lead connectivity to external aerial. Has anyone heard if Nokia will be releasing a Next G model that will have a cradle compatible with the CK-7W car kit or any other hard wired car kit/antennae coupler or patch lead compatibility?

Make/Model: BMW 325I
Year: 2006
Carkit Model info: Latest firmware for the 3-series.
Details: Will not connect with bluetooth carkit. Both bluetooth and Pre discover each other but does not connect with each other. The Pre shows that its connected with the car but the car does not connect to the phone.
webOS: 1.4.0
Included in compatibilty list: Yes
It connected and paired up fine before the update to webOS 1.4.0, had no issues with 1.3.5.1. The phonebook functionality also worked fine with the previous version of WebOS

Ipod nano with car kit

I have just fitted an Alpine car kit to play my nano in the car, but although the track info is coming through on the head set, i get no sound!
We've tried another nano and it works fine.
any ideas?

Try turning the volume up on your iPod.
You may also want to reset the iPod while it is connected to the system...
Resetting iPod
Also, this system connects to your iPod via the dock connector, right?
btabz

C7 - Bluetooth connection with car kit - problem

Hi all,
Can anyone help me about my problem. I bought new phone Nokia C7 with Anna software and I have a problem with pairing with my car (Bluetooth device Parrot CK3000 Evo). I think that the problem is with phone, because when I paired devices all things work well, but when I turn off the car (Parrot is switched off) and go away, other phones that I previously used disabled connection and can be used normally. But with this phone I see that for the phone connection still present (?!?) The car symbol on display still shown, and when I try to use the phone, I can make call, other people say that they receive calling , but I can't hear them, and they can't hear me. When I manually disconnect Bluetooth device, phone work normally, but when I am in the car again, two devices doesn't initiate pairing, and again I have to do this manually. It' a huge problem for me.
Is there anyone who have the same problem, or anyone who know how to solve this. I couldn't find option to solve this from menus.
Any ideas?
Unfortunately my warranty doesn't allow me to change software version from 022.014 to another... but if this will help...

Thank you for your reply,
Do you think, that the solution is new update for Parrot device?
As I understand, you still have the problem and your hope is this update eventually.
Do you read somewhere something about this?
I have registration in Parrot forum, but I haven't read inside anything about the problem . It looks, that they never heard about it...

Using ipod nano with car stereo?

sorry if this is a blonde question, but I have just got a new (to me) car which has a sony gtx cd300 stero in with an ipod connection. Ive bought a new ipod nano, plug it in, nano says "OK to disconnect". stereo display does not seem to recognise. Dont suppose anyone can advise me? Nano works fine on its own. stereo works fine as cd and tuner, just cant get it to work with the ipod? arrgh! Very very grateful for any help or advice. Kind regards Lindsay

As long as your headset is 3.5 mm jack, you can use it with your ipod. Same goes with an auxilliary cable to your car if it is not bluetooth enabled.

Using locked E72 with car kit

Similar Messages

Maybe you are looking for