Using Same Request with prompted filters in Guided Navigation

Hi Gurus,
I have a requirement wherein i have to show a report only when it returns results.
For this i put the request in a section and applied a guided navigation using the same Request as source Request.
Can i use the same request in the guided navigation as source request?
In the Request there are filters which are Prompted
My question --> in the Source Request in Guided Navigation , do i have to make the filters as prompted or do i have to make them equal to Presentation variables,which are populated from dashboard prompts.
Also i have one of the prompt as multiselect prompt...
Thanks
Ashish

Ashish,
Yes, you can use the same request here.
For request, you can use 'IsPrompted' if same column is used in Prompt else use presentation variable here which is populated from the dashboard prompt. Just based on the selected 'specific' value the report shud show results.
Refer
http://varanasisaichand.blogspot.com/2010/02/dashboards-as-prompts-in-obiee.html?m=1
http://bischool.wordpress.com/category/guided-navigation/
Hope its useful...

Similar Messages

  • HT1386 we are using same laptop with my wife for our 2 iphones and when sincronizing, she's getting my apps and is requested for my apple id and password when getting a new app on her device. How can i fix that issue?

    we are using same laptop with my wife for our 2 iphones and when sincronizing, she's getting my apps and is requested for my apple id and password when getting a new app on her device. How can i fix that issue?

    Each phone needs to set its own sync settings on the various tabs in iTunes.  On the Apps tab, for example, uncheck the apps that you don't want on the phone being synced.  This article may also be of interest: http://gigaom.com/apple/itunes-101-multiple-devices-one-itunes-account/.
    You can change the Apple ID used for purchasing on her phone by going to Settings>Store>Apple ID, tap the ID shown, sign out, sign back in using her Apple ID.  However, be aware that if she has any apps on her phone purchased with your Apple ID she will still be prompted to enter the password associated with this ID for all future updates of these apps.  This is because apps are permanently tied to the Apple ID used to purchase them, regardless of the ID in Settings>Store.

  • Creating Report using EPM Functions with Dynamic Filters

    Hi All,
    I am new to BPC, In BPC 7.5 i seen like we can generate EPM report using EVDRE function very quickly and easy too. Is the same feature is existing in BPC 10.0 ? if no how can we create EPM reports using EPM Functions with Dynamic Filters on the Members of the dimension like in BPC 7.5.
    And i searched in SDN, there is no suitable blogs or documents which are related to generation of Reports using EPM Functions. All are described just in simple syntax way. It is not going to be understand for the beginners.
    Would you please specify in detail step by step.
    Thanks in Advance.
    Siva Nagaraju

    Siva,
    These functions are not used to create reports per se but rather assist in building reports. For ex, you want to make use of certain property to derive any of the dimension members in one of your axes, you will use EPMMemberProperty. Similary, if you want to override members in any axis, you will make use of EPMDimensionOverride.
    Also, EvDRE is not replacement of EPM functions. Rather, you simply create reports using report editor (drag and drop) and then make use of EPM functions to build your report. Forget EvDRE for now.
    You can protect your report to not allow users to have that Edit Report enabled for them.
    As Vadim rightly pointed out, start building some reports and then ask specific questions.
    Hope it clears your doubts.

  • How to use "choose file with prompt" command?

    I need to use "choose file with prompt" command and I want give user possibility choose ONLY images (jpeg, png, gif). So, I write like this:
    choose file with prompt "Please, choose images for processing..." of type {"JPEG Image"}
    But this doesn't work! - All files (including jpegs) are dimmed, and user can't choose any....
    So, how can I filter JPEGs, PNGs and GIFs?

    I have found, that most of images on my computer has missing file_type, I don't know why..... so "type identifier of (info for (choose file))" also doesn't work properly.
    The only one way that 100% works is use Uniform Type Identifier (UTI) -- details here: http://www.huw.id.au/code/fileTypeIDs.html
    thanks.
    iMac G3, PowerBook G3 FW   Mac OS X (10.4.5)  

  • Win7 with FF 31, Android 4.2 smart phone with FF letest ver. using same account with 1 email. But phone is not get any pass, Bokmr, etc.

    Brother,
    We r using win7 with Mozila 31, Android 4.2 smart phone with Mozila latest ver. from google app store on 04/10/0214. Using same account with same email. But phone is not get any new information from win7 with Mozila 31. Pl z give helpful information.

    Hi w3ur_team,
    Thank you for your question. I understand that there are two devices that are logged into the Sync account. However the Android is not syncing.
    There are two places we can check:
    # In the Android Settings, under accounts is the attached account Firefox Sync or Firefox Sync (deprecated)?
    # Do the login credentials work on accounts.firefox.com on the mobile device and are there any error messages on the Sync menu from Settings > Sync?
    Please also see [[Firefox Sync troubleshooting and tips]] for more troubleshooting steps.

  • Using Same Menus with Revised Source Movie?

    My prediction on this question is that the only answer will be: Recreate From Scratch. But just to further my education, here goes...
    I have an iDVD project which I've got set up and working nicely from the DVD authoring standpoint. Menus and buttons have been extensively customized and configured, and everything's functioning the way I want. But for some unforeseen image-quality reasons, I had to go back to my Final Cut timeline and change some filter effects on a number of clips. Other than that, the timeline is exactly the same length, and all the Chapter Markers remain in the exact same locations, with the same names, etc.
    So I exported a new .mov QuickTime from FinalCut (called "Project_v2.mov" for the sake of this discussion), and meantime did a "Save As" in iDVD (creating a file called "iDVDProject_v2.dvdproj").
    The Questions:
    1) Is there now any way (either official or sneaky) whereby I can import the new "Project_v2.mov" source movie into this new "iDVDProject_v2.dvdproj" file, and have iDVD do its proprietary encoding -- but still have all my menus link to this new source material (which is frame-for-frame identical to the original source movie in terms of content, just with some different filter settings applied back in FCP)?
    2) If (as I fear) I have to start with a whole new project, and re-create all the custom menus and specific button settings, is there any efficient way to copy menu & button configurations from one project to another -- since "Saving as Favorite Theme" doesn't seem to retain a lot of that button & menu customization, though it's possible I'm not using it correctly.
    3) Again just for my education, if this were a DVD-SP project -- and the new .mov source movie had been encoded into asset-ready .m2v and .ac3 files using the same names as the originals -- would I be able to simply trick DVD-SP into referencing these new files and linking to their identical Chapter Markers from the already-created menus and buttons?
    Brain hurting now. Must go think about calm, blue oceans...
    John B.
    Toronto

    1. Bengt is right. The 'bug' will cause your chapter markers to default to the same chapter; usually the one nearest the change in your movie, but not always. Even though iDVD will recognize that 'assets have changed' and asks if you wish to update, it will only appear to have incorporated the changes, but the chapter markers will not work. There is no 'fix.' You must recreate the project.
    2. You can use 'Grab' to take screen shots of your custom menus and settings so you can more easily reproduce them, but you cannot do a custom saving of those to use in another project. Cheer up; it actually doesn't take THAT long since you have already created the project once, and you can refer to your screen shots to be sure you are reproducing it correctly.
    3. No experience with DVD-SP, but I am thinking it may be much the same as iDVD as far as doing what you propose.
    Good luck with the redo when you are back from the calm blue oceans!
    (Hello, Bengt! Been away...doing more family movies and too much time on Facebook!)

  • Use same report with different MySQL database

    I am using CR2008 with MySQL 5.1.
    I have a report that works with one of the tables (T1) in a MySQL database (DB1).  I have another MySQL database (DB2) with the same table name and structure, except that the data has been updated.
    I want to use the same report, but just ask CR2008 to now use DB2 and T1.
    Try as I may (using Set Data Source Location...), but I'm not getting anything to work.
    I looked for a previous thread on this, but was unsuccessful. 
    Thanks for any help.
    David

    Thank you for your helpful response.  What I am really asking is this -- when there is a CR2008 report based on db1, table1, and you want to use the SAME report with an identical table in a DIFFERENT database (db2, table1), can I easily use the same report?  Or, do I have to generate another version of the report?
    Thank you again.
    David

  • How to use same taskFlow with inputparam twice on page

    Hi,
    I have 2 taskFlows (Task1, Task2) with imputParams and CallMethod default activity.
    Tsak1 is form, task2 is table.
    I need to use Taskflow 1 twice on same page.
    TaskFlow1(without param)-taskFlow2(get param from taskflow1)-TaskFlow1(get param from taskFlow2).
    Based on this example [http://andrejusb.blogspot.com/2010/04/communicating-between-adf-regions.html]
    If shared data control is checked - taskFlow1's refresh both like copy.
    If unchecked - region's doesn't refresh and taskFlow2 can't use inputParam like #{data.taskFlowTest_view_view3PageDef.Oid.inputValue} (because i have 2 same taskFlow with this param).
    Can I use one taskFlow for this and how?

    For the Taskflow, set the data control scope for the task flow to "isolated" change the behavior.
    Thanks,
    Navaneeth

  • Using same files with PS and Iphoto?

    Again, I'm sure this one has been discussed b/4, however can't seem to find it.
    When using PS on the Mac, can you use the same files with Iphoto? IE, are the files in the Mac OS file structure available to both applications? And if so, are there problems using both applications?
    I like the ability of Iphoto to retrieve my IPhone photos, but prefer using PS for organization and managing.
    Thanks.

    iPhoto has a preference to use PS as an external editor.
    All photos will be saved in the "modified" folder in iPhoto.
    Hope this helps!

  • Need to use business objects with a project, please guide on basics.

    Hello
    I am a dotnet developer (asp.net with C#). I am sorry I dont know much about Business objects. Our client a financial firm wants to use Business object with a web based application. I couldn't got a clear and good understanding of Business object. The client just said Business objects allows dynamically creating reports even clients can create reports very easily even without knowing SQL.
    Kindly guide me about Business Object product and its what component I should check for using it. Please mention some links that can give me introduction.
    Thanks a lot,
    haansi

    Hi
    Business Objects is not just one tool. You should ask your client what they will use e.g. Crystal Reports or Web Intelligence.
    Here you can see half an hour Webinars that give you a good understanding of Business Objects:
    Webinars
    Regards
    Roland

  • Same request with different Author

    Hi,
          I have created the program ,the request created for the same . But after sometime, I got a call that the program is changed.While watching the versions ,  it was found that, same request is created with different author. Now my problem is it has the same request number ,but has 2 versions . How could this happen. And give me the solution.
    Thanks,
    Mohan ram

    Hi Mohan,
    This is possible because of below mention reason :
    1) Someone has changed the ownership of the transport request. and created a new version.
    2) Manually table E070/E071 has been changed. You can see the details in this table for your transport request.
    If you want to resolve the issue first change the owner, if you are not the owner of your TR. If it is belongs to you then directly Retrive the older version.
    Hope this will help you out.
    With Best Regards,
    Sourabh Batwara
    Edited by: Sourabh Batwara on Oct 1, 2010 2:32 PM

  • Can I transfer system from old macbook to new macbook using same OS with time machine?

    I have a MacBook running snow Leopard.  Thinking of getting a new Pro but want to just transfer my entire desktop and system to new MacBook using Time Machine restore.  Is this possible?  If not what are my other options so I do not have to rebuild desktop?
    Thanks!

    You can do it either directly from the older MacBook or from Time Machine. Your new MBP is unlikely to boot to the system on the MB as the newer Pro will have a later OS build and different hardware drivers among other things.
    Just use Setup Assistant. When you boot the new MBP, after the welcome video you'll be taken into Setup Assistant; you'll be asked if you want to transfer your Applications, Home Folder and prefences from another source. Choose either 'from another Mac' or 'from a TM backup' as appropriate, and connect the Mac (by firewire) or the TM drive when prompted and let it do it's thing.
    That will ensure you get one account with no permissions errors and all your stuff should work just as it did on the MB.

  • How to set up NAT for two servers using same port with ASDM ASA 5505

    Hi there,
    We have a new installation of a ASA 5505 and are trying to get some NAT issues straightened out. Here is the scenario: On our internal network, we have two servers running Filemaker Server, a relational database server that clients connect with using port 5003. Our goal is to be able to allow users from the outside to access either of these servers as needed. I know how to set up a simple static NAT rule and matching Access rule in ASDM which would be fine for a case in which only one server using a given port is running on a network, but for simple static rules I seem to be blocked from entering a different translated port number from the orginal port number, which becomes a problem when two servers we need to access from the outside are running software using the same port number.
    What is the simplest way to address this need? I am guessing that I need to set up a scenario like this, where port 5004 (or any arbitrarily choosen unused port, can be used to access the second server:
    Outside user enters   FQDN:5004  and this translates to Database server # 1 as   192.168.1.40:5003
    and
    Outside user enters   FQDN:5003  and this translates to Database server # 1 as   192.168.1.38:5003
    If so, what is the easist way to get this done? Or is there a better what to handle this scenario?
    Thanks in advance,
    James

    I would create two objects and use object NAT
    object network Obj_5004
    host 192.168.1.40
    object network Obj_5004
    nat (inside,outside) static service tcp 5003 5004
    object network Obj_5003
    host 192.168.1.38
    object network Obj_5003
    nat (inside,outside) static service tcp 5003 5003
    Of course you will need to open your outside interface for tcp ports 5003 and 5004 to make this happen

  • Can we use same position with two countries

    Hi, can we change the attributes of the position and Org units with proper effective date and re-use the same position in a diffrent country?
    I tried to do this and I get the following message. any advice?
    " The CO account assignment object belongs to company code 1000, not 1001 "

    I have updated IT1008 with new PA/PSA, still the error continues
    Here is the entire history.
    We have bunch of Positions defined in country grouping 99 which we want to use for a new country grouping.
    I have changed the following relationships on position and at org unit level.
    1) Created new IT1008 - PA/PSA at a position and at org level with a effective date
    2) Created a new cost center (new country) relation ship at position and at org unit level with the effective date
    Still have the same erroru201D
    u201CThe CO account assignment object belongs to company code 1000, not 1001 "

  • Why does Apple TV sons using in dorm keep saying password is wrong when the home Apple TV uses same password with no problem

    MY son is away at school and the Apple TV I got him to use keeps telling him his password is wrong.  This is the same password we use on the home Apple TV and he wants to be able use the movies, shows etc that have been purchased from this Apple ID.  Please help

    Most school's require a login to use the network, and the Apple TV has no browser to accomplish this task. It is likely not connected to the network, which is causing the error. Best to speak to the IT dept

Maybe you are looking for