Using USB dongle with tablet to install from WDS

Is it possible to install an image via WDS to a tablet without an ethernet cable by using a USB>ethernet
dongle?

Hi Brandon Koz,
When you use the Windows system the hardware must compatible with Windows requirement, you can use the Windows Server Catalog to confirm whether your hardware meet the requirement,
the WDS minimum requirement about the WDS you can refer the following KB:
The related KB:
WDS System Requirements
http://technet.microsoft.com/en-us/library/cc731097(v=ws.10).aspx
Windows Server Catalog
http://www.windowsservercatalog.com/
I’m glad to be of help to you!
Alex Lv.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

PXE boot tablet with Used USB dongle

We are running SCCM 2012 R2 Single Primary Site Server.
We are using the dongle (USB) to PXE boot the tablet computer.
We have advertised the Task Sequence to All Unknown Computer.
Once we use the USB dongle to image computer 1 , then the MAC address of USB dongle gets associated with the computer name of the tablet because the tablet does not have Ethernet port.
Now to image computer 2 if we PXE boot with used dongle gets PXE abort as it is known computer.
If we advertise to "All Known" computers then try the PXE boot works and we can image computer2 .
Now how can we advertise task sequence to "All Unknown" computers and get the task sequence to work with used USB Dongle.

I suggest going back and reading it again then.
Highlight:
A “better” solution could be to create a collection, that is based on the Mac Address of the devices, which are used to deploy those systems. So typically this collection will have a handful of Mac Addresses. Important part is, that those Mac addresses
shouldn’t be used in day to day business, just for the plain purpose of deployment. Then one can advertise as many task sequences as required and limit the deployment(s) to only media and PXE. This way, the deployment isn’t visible from the Software Center
but the support staff can continue to deploy new systems using PXE or other medias like USB Sticks.
Don't retire TechNet! -
(Don't give up yet - 12,830+ strong and growing)

Can I use a Vodafone USB Dongle with my apple IPad 1st Generation if I have a USB adaptor for my IPad

Hi there just wondering does anyone know if I can use a Vodafone USB Dongle with my apple IPad 1st Generation 16gb (WiFi only) if I have a USB adaptor, will the IPad !st generation support a A Vodafone Dongle(Irish network)

You cannot plug a USB dongle into an iPad using the USB part of the iPad Camera Connection Kit.
The Camera Connection Kit is for connecting cameras - hence the name.
You'd need to get a MiFi device to use 3G data via WiFo on your iPad.

Using usb mic with logic output stops

using usb mic with logic output stops

Aggregate devices are setup in the Audio/Midi setup of OSX Utilities, (Not in Logic). It gives you a way of having for than one audio i/o device. Once you have set up your aggregated devices in Audio/Midi, when you start Logic you will need to go into Audio preferences and choose the Aggregate device.

Can i use USB headphones with my X-Fi XtremeGamer sound ca

I was wondering if there was a way to use USB headphones with my card? Also if i use my front headphone jack i only get sound out of my left speaker... is this a problem with my card, or with my headphone jack? I'd appriciate any help! Thanks

Thanks for answering about the USB! Still wondering about the front headphone jack tho

Internet in iPad using USB dongle

Hi friends,
I would like to know if there ia any way we can get internet access in iPad 2 using USB dongle?
Is there any adaptors like sd card adaptor/camera adaptor available for it?
Please help me.
Albert

Connect USB dongle to 3G router and connect using WiFi.
http://www.aztech.com/prod_3g_hw550.html

How Do I: Make a bootable FW or USB drive which I can install from?

I was at our local Apple store yesterday after my wife's Macbook decided not to like the 10.5 install disk that came with it. It would make it to about 7% and then error-out and message us that we needed to clean the disk. Multiple times. So I brought it in and the nice Genius had a drive which had 10.4, 10.5 , Drive Genius and more on it. He was able to run Disk Utility from it as well as boot from it and install from it.
I have multiple drives floating around, too small to be of much use and log ago replaced with larger drives.
We have three Macs and two versions of OSX. This would be very nice rather than digging out the disks.
I know I can install to a FW or USB drive and boot from it, but how do I go about installing from an external drive?

Note that the restored HD partition version of the installer DVD will still be writable, unlike the DVD itself, which is inherently read only. This should not be a problem unless something either corrupts its files or adds something that interferes with the operation of the DVD version of the OS* (which is stripped down & contains some small differences in the component files it shares with the standard version).
For this reason, you should not mount the partition unless you need to use it and/or unmount it when not in use.
* By "the DVD version of the OS," I mean the OS that boots the Mac to run the installer, not the OS version it installs.

How can I use USB camera with NI cRIO 9022, please see my strange problem.

Hi,
I would like to use a USB camera with NI cRIO 9022. I used the same USB camera with NI USB 6216 DAQ device and developed a VI(within a PROJECT and outside it). So, It is working fine with NI USB 6216 device when I use the Vision Assistant Express VI and gets detected in its Initialization Window. Please see JPEG File 3 where I get NO ERROR.
I am facing a problem when I want to use it with NI cRIO 9022. What exactly I am doing in this case is:
1) Create a NEW PROJECT
2) Add Targets and Devices(NI cRIO 9022)
3) Use the Scan Interface mode
4) Create a NEW VI under the cRIO 9022 device
5) Use a Timed Loop(Synchronized with Scan Engine) for continuous Data Acquisition and Sending from the Analog I/O modules.
6) Use the Vision Assistant available through the NI Vision Acquisition 2010 Module(I get STUCK HERE! The Express VI opens the Initialization Window, but I don't see the USB camera like in JPEG File 3)
I am facing difficulties with this HOST COMPUTER, cRIO implementation differences. On my host computer I have the software packages as shown in JPEG File 1, and on my cRIO 9022 as shown in JPEG File 2.
Can someone guide me how to overcome this and get the USB camera detected when I am using NI cRIO 9022?
NOTE: If this is a problem with software mismatches on HOST and NI cRIO 9022 device, please see JPEG Files 1 and 2 for available software and Host and cRIO 9022.
Thanks.
Amar.
Attachments:
Host Computer Image or Vision Acquisition Software Installed.JPG ‏91 KB
IMAQ and dx Modules Installed on my NI cRIO 9022 hardware(No NI Vision Acquisition 2010 SP1).JPG ‏82 KB
NI Vision Acquisition Express NO Error for NI cRIO 9022.JPG ‏48 KB

When you select My Computer, you are running the program on the PC. In this case, the camera works because it is connected to the PC. The scan engine doesn't work because it needs to run on the cRIO, not the PC.
When you create the program on the cRIO, you can use the scan engine because the program is on the cRIO. You can't use the camera because it is back on the PC, and can't be found on the cRIO.
The project is a wonderful tool, but it may be making the programming seem too simple. It may not be clear to you that by moving a program to a different location (PC or cRIO), it is running in an entirely different environment on a totally different machine, even though it is just a little further down in the project. You can't easily access the hardware on one machine while running the program on the other.
So the summary is: The camera is attached to the PC. The scan engine runs on the cRIO. Never the twain shall meet.
Bruce
Bruce Ammons
Ammons Engineering

Using USB preamp with Garageband

Garageband will not recognize my microphone for some reason. I am using an M-Audio USB Preamp, with a Behringer condensor microphone. I have changed the input/output settings in both the mac settings and the garageband settings to "M-Audio Mobilepre USB." Garageband must recognize the preamp because it has it as an option in the input and output. The computer hears the microphone, because the input level bar in system preferences responds to sound. Garageband works fine with the built in mic, and the microphone volume is maxed, so I know that isn't it. Any help?

How did you figure it out?
I've been trying to plug my Gibson into Garage Band but all i get is feedback. I seemed to have followed all the same steps as you. From researching on-line right now it looks like I might have to get a pre-amp... you know anything about that?
any help would be cool.
thanks!

Tkinter with X without installing from fink

how can I use tkinter with X without install it from fink? I don't want change my current python setup and I already have tkinter installed but it runs only in cocoa mode. is there any easy solution for this problem?

{quote:title=noname242 wrote:}
thanks. I've read that post and it ends up with a fink install of python. But fink will break a bunch of other python specific installs, numpy and scipy and my current 2.6 python setup. Besides, I don't really like all of the extra packages that fink tries to install. Isn't some way around this?
{quote}
Fink most certainly will NOT do that.
The worst it will do is put /sw/bin/python at the head of the path, before /usr/bin/python
Just do something like this:
alias python=/usr/bin/python
alias pythonx=/sw/bin/python
or whatever else you need, or don't source /sw/bin/init.sh unless you need what fink has.
Fink will install tcl, tk as dependencies, since you need these for the X11 version.
Otherwise, just download the X11-competent version of the source code and compile it yourself. You'll still need X11 versions of tcl and tk.

One USB HD with Multiple AEBS, Move from NAS/File Server

Okay to explain my question I'll describe what i want to do. If this is possible i would buy 2 airport extremes, and one USB HD. I would then use the USB HD to do TimeMachine backups to an Airdisk. I would like to then be able to take the USB HD with me when i go to work, and be able to do Airdisk backups there, having connected the same USB drive to different TC or AEBS, and afterwards, obviously bring it home and continue doing backups there. Is this at all possible? Has anyone tried? Can i at least browse my backups after having connected them to a different AEBS?
Another question is, up until now i have been using an "unsupported" backup to my Linux File Server over netatalk. I did this, mainly because i have raid, and my data can't really be lost this way. Is there anyway to move this backup to an Airdisk? I read something here about different formats being used to save data on different types of backups. The share is on a partition that is formated ext3, if that helps at all. Oh and the backup itself is a sparseimage.
Thanks for your replies,
Dmitry
Message was edited by: Russo017

Okay to explain my question I'll describe what i want to do. If this is possible i would buy 2 airport extremes, and one USB HD. I would then use the USB HD to do TimeMachine backups to an Airdisk. I would like to then be able to take the USB HD with me when i go to work, and be able to do Airdisk backups there, having connected the same USB drive to different TC or AEBS, and afterwards, obviously bring it home and continue doing backups there. Is this at all possible?
It should work fine, but you may run out of space quickly if you back up multiple computers to the disk.

Can I use USB 3 with my 2.8Ghz Quad-core

I have an early 2008, 2.8 GHz Quad-Core Intel Xeon Mac Pro, can I use USB3 Devices with it?

Yes, they are all backward-compatible.
If you wnat USB-3 speed, you would need a PCIe card.

Need someone to contact me regarding problem with tablet trade in from today! Very upset!

I went to the Best buy in Lakeland, FL today with my two children who were eager to trade in their tablets for gift cards. Both tablets were in great working condition, and we even still had the boxes, manuals and accessories. One was a Mach trio stealth 7" and the other Mach stealth lite 4.3". They refused to take the 4.3" one as a trade in, stating it was listed in Best buy's database as a "mp3 player". I questioned this as the tablet itself even has the words "internet tablet" printed on the back, and pointed out that the manufacturer has it listed on their website as a tablet as well. The supposed "manager" that was called over was very rude and argumentative. After I let her know she could go (because I was not going to continue to listen to her rudeness), the other associate who was helping me sat on another register and rang up several people, ignoring me. Finally he asks if he could still help me with anything. Of course I pointed out that I DID in fact still have a tablet there to trade in (which he knew, as he had already began processing it before the manager was called over). This trip left me feeling very sour towards Best Buy... Well, there I left, with one happy child, and the other one disappointed and sad. How can you say a tablet isn't a tablet, when it's clearly labeled as such on the product itself? The exclusions said nothing about the size of the tablet, so I really need some answers.

Hello AmandaSmith,
I am very disappointed to read about your poor experience when you went to take advantage of our Trade Up to the New Fire HD promotion at the Lakeland, FL store. As a mom I can definitely relate to how you felt because we love our children so much that it is upsetting to see them disappointed and sad. This should have been a fun experience for the both of them (and you), and I sincerely apologize if the store associates were rude and disrespectful.
As long as your tablet meets the minimum requirements of the promotion, then you should be able to qualify for the trade-in to receive a $50 gift card to use towards any other tablet or item. Those minimum requirements are:
- The device must be able to power on
- Must have a valid serial number
- Cannot have a cracked screen
- Cannot have any liquid damage
- The device cannot be a Barnes & Noble Nook or other eReader
That being said, I have some further details I would like to share with you, so I will be sending you a private message. To view your private messages please make sure you are logged onto the forum, and click on the envelope in the top right hand corner.
I truly appreciate you visiting the forum to share your experience, and please keep an eye out for that message coming your way.
Sincerely,
Maria|Social Media Specialist | Best Buy® Corporate
Private Message

Using a dongle with hotspots

Cna you use the dongle when out and about with hotspots? do you have to log in differently? i.e. other than email and password. Does a dongle help with the connection?

Yes you can use the dongle. All the dongle does is to provide a wireless connection to devices that do not have one. You will not have to log on differently and it will not give any additional help with the connection. It it sees the homehub that is broadcasting the BTWifi signal it will connect to it.

Can I use USB 6008 with LabVIEW 6.1 RT?

Hi there,
I've been using LabVIEW 6.1 RT for my applications and so far I haven't felt the need to upgrade.
However, I decided to try the USB 6008 and I'm learning the hard way that this device will only work with NI-DAQmx and apparently not with the latest NI-DAQ 7.4.2 (legacy) In fact, I can't see the device in MAX 4.1
Is there any way I can use the USB 6008 with my 6.1 RT version of LabVIEW ? or should I send the thing back to NI ?
I will appreciate your guidance on this issue.
Thanks a lot,
at

Hi at -
Allisso is right. There is no way to use the USB-6008 with LV 6.1, because neither of its drivers (DAQmx and DAQmxBase) support that version of LV. You'll have to either upgrade to a current version of LV or work with another device. I recommend contacting your sales rep at NI for help.
David Staab, CLA
Staff Systems Engineer
National Instruments

Using USB dongle with tablet to install from WDS

Similar Messages

Maybe you are looking for