Valuation of Physical Samples
I am dealing with a problem in which the business does not always record results against ALL inspection characteristics. As a result the physical sample does not auto-valuate and the inspection results are not written to the batch. This is a very serious situation the business. Is there a way to either force physical sample vaulation upon usage decision?
Thanks
Yes. It is a real issue. The problem is you can make a UD without vaulting all the physical sample, (or inspection points). In your case I don't see how you can have an automated process for vaulting the inspection points. How is the system to know that for a given sample whether or not you are done with it or not?
I would suggest using one of the UD user exits to verify that all samples are valuated before the UD is saved. If the aren't, the user is informed via a window popup and then they would have to go do the valuations and then try the UD again.
FF
Similar Messages
-
Error during Usage Decision - Not All Physical Samples are valuated
Hi,
I am using Sampling Procedure as follows:
Sampling Type : Fixed Sample
Valuation Mode : Attributive Inspection nonconf. Units
Inspection Points : Sample Management
I have assigned the Inspection Point as 200 and Sample Drawing Procdure in Inspection Plan Header.
I have recorded and closed results for 3 samples. During Usage decision the following message shows:
Not all physical samples are valuated! Do you want to force inspection completion?
This means that Valuation of Inspection points have not updated. I request your help to solve this problem.
Thanks & Regards
V.DevarajHi
Check the inspection plan, check for all the operation, by double clicking on operation you enter the opertioa details screnn, pls scrol down, you should have a field called VALUATION, select the option "automatic valuation option" .
try this
navin -
Not all physical samples are valuated, force inspection completion?
Hi
I have entered results against inspection characteristics but on UD the system gives message "not all physical samples are valuated, do you want force inspection completion?
What is missing or how can I avoid this message?In QE23, Select the inspection lot and check for the physical sample,
Once you enter both, you will get the screen similiar to QE51 to record result,
You will see a button for physical sample which u need to select and do the valuation.
hope this helps -
dear experts,
i have query in physical sample drawing .
i have created physical sample drawing procedure and i have assigned that to the insp.plan header with insp.points '210' and i have gave automatic valuation to operation level.my physical sample type is GR. now my query is insp.lot was created but how to change the status..
Is the procedure what i followed is correct?
or else tell the process step by step how to draw the physical samples and process that.
thanks in advance
regards
prasad
Edited by: prasad.k on Dec 21, 2007 11:46 AM
plz anyone give reply b'coz it is very urgent for mehi prasad
i think you have not maintained the container while making the Good receipt.kindly check once again,
for detailed process kinldy refer the following link where the entire procedure has been done
http://help.sap.com/saphelp_46c/helpdata/en/fe/67f9979d6f11d189b60000e829fbbd/frameset.htm
regards
thyagarajan -
Display of Qual Characteristics in QE03 for Physical Samples
Hi All,
I am using result recording with physical samples.
I am able to record Qualitative characteristics through transaction QE01. When i want see these "qualitative characteristics" in QE03 screen, just an icon appears in the "results" coulmn in RR screen. (Code & Code Texts missing)
Why is this so?? When I go back & see in QE01, I can see the Qual Values.
Require some pointers to address this issue.
Thank you a lot in advance
Regards,
PradeepHello,
You may need to check QE13 to view the qualitative results for the inspection point.
Regards,
John -
Availability of Standard Physical Sample Report
QPR3 Tcode provides Physical Sample details for only one Inspection Lot at a time
Instead I need below details
Input Data :
Material From To
Batch From To
Plant From To
Inspection Lot From To
Physical Sample Number From To
Sample-Drawing Number From To
Sample Category From To
System status From To (Internal Status of Physical-Sample Record)
Physical Sample Release Date From To
QM mat. auth. From To
Creation Date of Physic Sample From To
Output :
1) Material No
2) Material name
3) Batch
4) Inspection Lot
5) Physical Sample No
6) Plant
7) Sample Category
8) Status (Internal Status of Physical-Sample Record)
9) Vendor ( No & Name )
10) Manufacturer ( No & Name )
12) Drawing number
13) Created by
14) Creation Date of Physical Sample
15) Released By
16) Physical Sample Release Date
17) Time of Physical Sample Release
18) Sample Quantity
19) Unit of Measure for Physical Sample Size
20) Sample-Drawing Procedure
21) QM mat. auth.
22) Insp. Lot Qty
23) SampleSize
24) No. Containers
25) Lot Cntnr.
26) Group
27) Group Counter
28) System Status ( Inspection Lot )
Is there any provision for accessing same above details via SAP Standard Report
Kunal ShethGet Solved
-
How to manage physical sample in SAP?
Hi,
How to manage physical sample in SAP?
Regards
Ashish JainHi
Physical sample is to keep the sample of a product till its shelf life expiry date. E.g. In case of any shelf life applicable product, the inspected sample will be retained till its expiry date. If any customer complaints are received, on inspecting the complaint, result may be compared with the existing physical sample.
In SAP, Material master should have inspection type 15.
To create physical sample, sample drawing procedure has to be created and attached to the header of inspection plan. With this set up when the lot is created, physical sample will also be created. Result recording should be done for physical sample. Physical sample storage information has to be updated through transaction code QPR2
Regards
Nikhilesh Ray -
Is there any Bapi for Physical Sample creation
Hi Folks,
Is there any Bapi for physical sample creation. My scenario is like this I have the data in the table (material, plant, batch, type,vendor, vendorbatch ). For each material i have to create a physical sample......
Any ideas or suggestions would be appreciated..
thanks
chaithanya.HI Chaitanya,
You can use : BAPI_BATCH_CREATE
it has import paramaters like Material, Plant , batch , Batch Attributes ( Vendor No, Vendor Batch etc)... I guess this is what you are looking for.
Regards,
-Venkat. -
Mass release of Physical Samples
Hi Gurus,
Is there any T code for Mass release of Physical samples. We are in cutover and for around 1000 Open inspection lots, we need to release the physical Samples. It will be labourious to release every sample using QPR4.
Tried LSMW, SHDB but the release is not getting recorded. Is there any other way for releasing physical samples in mass?
Thanks in Advance.
regards,
senthilDear,
Please check in QPV2. There is one check box. this is determine the automatic sample determine.
check box is Confirmation req. Please remove this check box.
-Sandip
Edited by: Sandipsinh Shaktavat on Mar 6, 2012 12:15 AM -
Dear SAP Experts,
I have created inspection lot for a material with movement type 101 against a Purchase order in developmet client. I have attached inspection plan to it. In inspection plan sampling procedure & sample drawing procedure are used. According to it Sample calculation is also done. Now the inspection lot is in released status. When I go for result recording system does not allow me for result recording. When I investigate, I observe that the physical samples (both primary & pooled) are in CRTD status. They are not in result status thats why system does not allow the result recording. Please note that I have not used any user status which may prohibit release of physical samples.
I think, after releasing the lot, physical samples must automatically have release status. Is my assumption correct?
If not how the physical samples can have release status automatically?
Kindly help in this regard. Your valuable help is appriciated.
Regards
VivekDear,
Please check in QPV2. There is one check box. this is determine the automatic sample determine.
check box is Confirmation req. Please remove this check box.
-Sandip
Edited by: Sandipsinh Shaktavat on Mar 6, 2012 12:15 AM -
Inspection type 01 and physical samples
Dears
I have scenario like this
My raw material is avtivated inspection type 01 and 15 (For physical sample)
as GR done inspection lost was created of 01 type and it was workin fine
now when ever vendor delivery a new item with a slight changes for existing material (So material number will not change)
So as GR done inspection lot was created, But for this inspection lot i need system treat as a physical sample (normaly creating by using QPR1)
to achive this what are the things i need to do
Pls tell me the details step with process
Pls give your in put
hope my question was cleared
Thanks
Faisalsir,
actually i am try to do something for sample approval process
my scenario is
when ever vendor deliver any sample we need to recored it and keep a database with all inspection details
some times vendor will deliver the sample in po with zero value
so can you pls tell me how i can map this scenario
Faisal -
Hi,
how is the physical sample handled in QM-IDI ?
In 'QAIMV' there is a field called 'PHYSPROBE' with a length of 6,
but in transaction QPR4 the field Physical Sample' is longer than 6.
How are these field related ?
Best regards
Jenshi prasad
i think you have not maintained the container while making the Good receipt.kindly check once again,
for detailed process kinldy refer the following link where the entire procedure has been done
http://help.sap.com/saphelp_46c/helpdata/en/fe/67f9979d6f11d189b60000e829fbbd/frameset.htm
regards
thyagarajan -
QM Physical Sample Numbers to xMII
I am trying to get the Physical Sample numbers for an Inspection Lot out of SAP and into xMII for additional barcode label processing. I can see the information I need in the SAP R/3 client but am unable to get it to xMII.
I am using the JCO interface and using BAPI_INSPLOT_GETLIST to get the inspection lot # for a Production Order and have tried passing that into BAPI_INSPLOT_GETDETAILS, BAPI_INSPOPER_GETLIST and BAPI_INSPOPER_GETDETAIL but none of them seem to have access to the physical sample records. Can anyone help me with a RFC, BAPI or user Exit that I can use to get this data?I have tried using BAPI_INSPCHAR_GETRESULT but I can only get information if the results for that char have ben posted. I am trying to get the physical sample numbers to send to a barcode label application so we can track the samples thru the testing machine. The requirements are for multiple lables in different sizes so we are not printing these labels from SAP.
For each inspection lot\physical sample drawing, we generate 30 physical samples. (1 master, 2 pooled, 27 retention) I need to get these numbers out of SAP to print them.
If I run transaction QA3 from the client and select Samples (Physical Samples (Shift + F2)) from the menu, I can see the list I want before any results have been entered. -
Hi all,
Does anyone know how to extract QM Physical Sample information? Did anyone face this problem before? Do I have to set up a new custom extractor based on QPRS table or is there any standard way to do that?
Regards,
ModroHello Modro,
See this link [Archiving Sample Records (QM-IM-SM)|http://help.sap.com/saphelp_nw04/helpdata/en/6f/370e405c538f5ce10000000a155106/content.htm]
Thanks
Chandran -
Result Recording without release of physical sample
Hi,
SAP Gurus,
I have one query regarding result recording for some lots.
I have created one sample drawing procedure and assigned to inspection plan.
In SDP I have maintained primary size factor 1, Fixed number 1, Acc.to smplng scheme-PM, Insp. severity-4.
In pooled sample size factor 1, Fixed number 1.
At header level Consider No. of Containers Tick, Confirmation Required Tick, Used in Task List Tick.
I have done One GR for raw material and assigned that inspection plan to the created 01 origin 01through QA02.
One primary and pooled sample is created in CRTD status. I have not release the sample.
When I go to QE11 for result recording system assigns the physical sample by default and branch me direatly to the result recording screen.
My query is that, i have acivated confirmation required tick in SDP then system should not accept the sample which is in created status and should not allow me to do result recording. But system is skiping this and allowing me to do Result recording.
Please let me know what necessary settings i have forgot.
Thanks in advance,
HarrieshDear Shyamal,
The scenario i mapped is that, I need to release the sample manually. User should not go for RR without sample release.
It is working fine also. But for few lots it is not asking the sample release. It ir skiping the sample status stage and directly going to RR.
Please let me know way system is behaveing like this for few lots only.
Thanks and regards.
Harriesh.
Maybe you are looking for
-
There is a new email address on my phone in the apple id password box. My password will not work. How did this happen and how can I change it back?
-
What are the settings for the "Default Client Settings"?
What are the settings for the "Default Client Settings"? I changed them instead of creating a new policy and would like to fix that. Thanks James A+, Network+, MCP
-
Read messages still in inbox????
Just bought an imac - very happy EXCEPT - my Mail which I've ported across from AOL. Unlike very other mail system I've come across all messages STAY in the inbox after reading until I manually drag them to a saved folder or of course delete them. I'
-
Can anyone tell me what does the following error tell? Thank you. ERROR: Unexpected syntax: "EOS" was expected but found Alvin
-
Picture of the contact when calling and...
Hey, When someone calls me, I don't see his photo on full screen, instead I see the wallpaper and a small pic of him at the top. How can I make it put the photo of the caller instead of the wallpaper when he calls me? And can I put a password to ente