Variable Text not appearing in Report

Hi All,
I have created one BEx Query in which in selection criteria i am giving verson (100) , Year (2008) , Posting Period (10 - 12) i have one key figure is Total Value in GC . Now my req. is when i run the report , in keyfigures these values like Period 10 - 12 in GC must appear in column header.
I created variable in BEx designer for Period like ZIS_A1_CUR_FROM_TEXT and ZIS_A1_CUR_TO TEXT . and i defined all the properties correctly. Now when i run the report it shows me variable name like &ZIS_A1_CUR_FROM_TXT & &ZIS_A1_CUR_TO_TEXT ... but it should show me Period 10 -12 in GC.
Should i set any properties ? or did i forget any properties to set ?
Regards,
BI NEW

Hello,
Firstly if ur KF is a calculated KF then the text variable will display only if there is no overlap of variables belonging to same characteristic.
If it is just restricted KF then try,
Processing type: Replacement path
Replace variable with: External characteristic value key
In that the lower 2 settings are OFFSET START & OFFSET LENGTH...
Try changing this 2 settings with negative and positive values and see if it brings you the perfect output
if in Dev sys.
try displaying each text varibale one at a time instead od showing both together.
As the last option u can delete the two text variables from its definition and create them again
Regards,
Dhanya

Similar Messages

Variable Text not working as dynamic header in Crystal report

Dear Experts,
I'm working Crystal report that connected to Query BEX SAP BW trough SAP integration kit,
currently i have case that need report dynamic header using variable text from BEX query, but seem the variable text not working in Crystal reports. the header in Crystal report shown as Desription\technical name, not result from the variable text in Query BEX in SAP.
In https://wiki.sdn.sap.com/wiki/display/BOBJ/Crystal%20Reports%20and%20BW%20query%20elements stated that the "Text variable" with "replacement path" is supported, but i don't know in my query is not working.
i already set in Database -> options-> table and fields -> Show Both, but the text variable still not working.
can you help me
Crystal Reports 2008 12.2.0.290
SAP Integration KIT 12.1.0.890
Thanks
Luqman

Post your question BEX and B1 and classic SAP data source issues to the Integration Kit forum

GL is not appearing in Report S_ALR_87013326

Hello Gous,
One account is not appearing GL is not appearing in Report S_ALR_87013326 for example:
Account group = Other Expenses
Description = Dividend expense
it has accounting document as well and postings.
Thanks in advance
Ahmed

Hi Sridhar,
Thanks for the input.
But still Budget is not appearing in the report, even after running CJBN & CJEN.
I had a look into CJ30 but the overall Budget is available. Is there any change required in the report.
Regards,
Selva

GL & PC description not appear in report painter (ECC6)

Dear Expert,
kindly help me on this issue. GL description and Profit Center description not appear in report using OFL Table.

Hello sayujya Patil,
Thanks for your reply, i have created report in Report Painter, after execution the report i tried in all the parameters under setting menu > report and section layout as well> lead column --> and kept the radio button on key and description, still its not showing the description of the GLs under lead column....
Please reply...
Thank You.

Russian text not appearing correctly in excel file while needs to be mailed

Hi all,
I am sending vendor data to each vendor to their email id through excel files in a report. This report does not display any of this data.
For this iam using the FM. SO_DOCUMENT_SEND_API1. The excel sheet consists of Russian text. This Russian text is not appearing properly in the excel sheets sent through mail. Some weird characters are appearing instead of the Russian text.
I tried using "Translate" but its invain. I also tried to generate the report by logging into the system in Russian still i could not get proper text.
Kindly help me in resolving this.
<< Moderator message - Please do not promise rewards. >>
Thanks and Regards,
Venu.
Edited by: Rob Burbank on Nov 17, 2011 12:22 PM

Hi
You mean to say that the table you have queried doesnt have a column called last_update_login right ? If its the case then what you did for debugging the error. Pls share it since i was also struggling with *<<<< needs to be declared abstract; it does not define the method setLastUpdateLogin() ..>>>*
error.
Thanks.
Praveen

Placed Files and Copied Text not Appearing in Links Palette

I am working on an annual report.
The report is a booklet. I'm using master text boxes. The report is basically one, long flowing stream of text. Within this there are many articles, divided by headings.
I'm receiving articles for this annual report from many different sources, text within emails, Word documents, etc.
I have the "Create Links When Placing Text and Spreadsheet Files" checked.
I'm having this issue:
Nothing is appearing in my Links palette.
When I go to File>Place, and place a Word document in as an article within my report, it doesn't appear in the link palette. When I copy text in from a Word document, it doesn't appear in the link palette.
However, when I place the Word document in the annual report within it's own text box, THEN it appears in the links palette.
But I don't want each Word document within it's own text box, I want it to be a part of the other text flow within the report.
Is there something I'm doing wrong?
Can't InDesign retain the link to the document even if the text is placed within a larger body of text flow?

No. It's not possible to maintain a link to text that's not in its own text frame.
What would happen if you were to edit the text in the frame, and part of the text affected was linked and part was not. What would you expect to happen? Such a workflow isn't possible as far as I know.

Variable description not appearing in variable screen

Hi Experts,
we have created a variable which is ready for input. While executing the query, the variable description is not appearing in the variable screen, instead variable technical name is only appearing in the variable screen.
The same variable is being used in two queries. In one query, it displays the technical name and in the other query it displays the description of that variable.
your solution would be greatly appreciated.
Thanks,
Franks

yeah......it is strange. As soon as the variable screen comes up, all the variables normally shown in description rather than a technical name, unless you select "Key & text" OR only "key" OR only "Text".
But, in this case this particular variable is showing in technical name, the description itself is disappearing from the variable screen.
No changes have been made to variable. The same variable displays with descriptions in other query. so difficult to analyze.

Crystal Reports - Charts do not appear on reports in some cases

We have a few reports that include charts on them (created with Crystal 2008 Designer). These reports have run fine for quite a while but this morning we got a support call with a client reporting that though the reports process and appear correctly, the charts do not appear - instead the client can see a box where the charts should be - but no charts appear.
Wait... This has a curve ball...
The same client then ran our application on the SAME machine, but in a VM (virtual machine) on that machine, and now, the charts appear!
I can understand that if a machine is low on memory, charts might not appear - but then why when a VM is used on the same machine do charts suddenly appear?
Is there any way, any suggestion someone can offer by which I can 'trap' this situation in code, PRIOR to producing a report that is going to have a big blank spot where a chart normally appears?
Thanks for any help - much appreciated.

Nope... Not video corruption... We finally figured it out...
Its the 12_0 runtime. Run it, and you dont see any charts, no errors, no warnings, just no charts - update to the 12_1 runtime and voila, charts are suddenly present.
Just to be sure we were not going nuts we uninstalled, reinstalled the 12_0 and no charts again - put in the 12_1 runtime and there they are again.
Problem solved.
Edited by: Bruce Landry on Mar 9, 2010 7:50 PM

Budget not appearing in Report S_ALR_87013558

Hi Friends,
For project the budget is not getting displayed in Report S_ALR_87013558 though the budget is planned by TCode: CJ30 and released also by TCode: CJ32
Is there any setting in customising in information systems to display in the report.
I think same question was raised by selvakumar venkatachalam earlier..... but there is no specific soln in his thread.....
Please treat this as Urgent.....
Regards,
Gupta
Edited by: Gupta KNVS on Feb 7, 2008 11:33 AM

Hi Sridhar,
Thanks for the input.
But still Budget is not appearing in the report, even after running CJBN & CJEN.
I had a look into CJ30 but the overall Budget is available. Is there any change required in the report.
Regards,
Selva

Intrastat report Spain. Credit memos posted not appearing in report

Hi
I have a issue where the debit notes raised to vendor are not appearing in Intrastat declaration.
How this debit and credit notes must be taken by Intrastat ? This problem is there since the Intrastat report is being used.
Is there any specific configuration for this or
is there any period check because of which the debit notes are not picked?
The reason is po was created in Feb 2009 and continuous GR and invoice postings happened in subsequent months which are all captured in Intrastat report. A debit note was raised in Sep 2009 which does not appear in the report.
Request your expertise and help to resolve this issue.
Thank you

credit memos are not supported in SAP as you can read in docu:
http://help.sap.com/saphelp_sbo2005ao/helpdata/en/F3/4392579F5DC24E9FBE2FA84E9E7660/frameset.htm
Please read the local Intrastat guide, in many countries it just says that you have to file a correction per paper form to your statiscal office.
SAP explains this as well in OSS note 374682:
If a credit memo refers to a billing document which was already declared to authorities, proceed as follows:Here, you should create a written correction to the statistical office.Specify a data record to which the credit memo refers.
Check the documents of the statistical offices for information on when you have to declare the credit memo (limits for values and quantities).*********************************************************************

Material item text not appearing in PO Print Preview

Hi experts,
We have created a new PO type . We have assigned it with PO text via Spro>Purchasing>Purchase Order > Message > Text for messages > define text for purchase order
Maintained text for document header
Maintained text for document item
But still in Purchase Order , the material PO text at item level , is not appearing at the time of print preview / print out.
Please suggest .
Regards,
( Rajneesh Gulati )

If I understand correctly, you want to copy the purchase order text from the material master directly into the PO's for this material.
I got the same problem; text appears in PO item text, but doesn't appear on print preview.
=> check your forms first
=> if you can't find an error here, check the copying control in
SPRO -> Materials Management -> Purchasing -> Purchase Order -> Texts for purchase orders -> Define copying rules for item texts
go to the text linkages of the text type that you want to see appearing
=> make sure that the entries with source object 'material master' have the Fix value (blank) rather than N or * (if you see the text appearing in the PO but not on the print out, this means that this setting is currently set on *)
Hope this helps

To Do List item not appearing in Reports

Has anyone had success in implementing the To Do List? I followed the instructions posted on Adobe (written by Peter Grainge):
Create a New To Do item (or Edit an existing one)
Check it as completed for a topic
Add To Do List to the items that will appear in a report
Generate a report
The To Do item does not appear in the report.
There's also no indication in the help about whether you can create new items AND edit existing ones (or just one), and if there is a limit to the number of items allowed. Seems like I remember seeing/hearing about certain restrictions of that type when the feature was initially announced.
Leon

Are you referring to something I posted here or on my site?
This bug was reported a few weeks back and I believe it was reported. However, the more people who report it affects them etc...
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
See www.grainge.org for RoboHelp and Authoring tips

Heading texts not appearing correctly in WDA search help

Hello experts,
I am facing a problem in WDA. I have a field(Profile Key) in my WDA application which takes the input search help automatically from the data dictionary. When I execute my application the F4 help is displayed for the field on pressing F4 but the problem is: the heading texts are not appearing properly(instead dots are dispalyed) for few of the fields in the search help's value list. Some observations:
1. heading texts are not properly displayed for columns whose field length is 1 or 2.
2. in DDIC, heading labels are maintained for the logon language
3. same search help works fine in R/3, the problem is only with WDA
How can I solve this problem? Please help with your inputs.
Thanks,
Yuvaraj

The problem can be solved by applying the note no 1100420.
Regards,
Yuvaraj

Cost elements not appearing in report

Hi,
We have reports done in report painter. we use cost element group to retrieve the amounts posted to that group.
I added 2 more accounts to the cost element group and saved.
but it is not appearing when I run the reports which shows cost element wise amounst for teh period.
rgds
Neha

Hi sanjay,
thanks.
But GR53 gives me Library and report group.
when i go to GRR2, gives the library I see in GR53, and search report group in list of values ,
I am not able to see the report group as above.
When I manually type in it says
Report Y511 does not exist
Message no. KH 502
Diagnosis
You tried to change a row/column structure which does not exist.
Procedure
Choose an existing row/column structure or creating a new one using
    'Row/column structure' -> 'Create'.
Pl advice.
thanks
neha

Alt text not appearing in WebHelp output

We are using FrameMaker 10 and RoboHelp 9 to output as WebHelp. In the FM files, I have added alternate text to anchored frames containing images. When I update the linked FM files in my RH project, the screen tip is empty for these images, but when I look at the HTML source for the topic, it shows that the alt text is there:
<p class="widegraphic"><img alt="Coach completes form and can either submit now or save it as a draft, edit it, and submit it later. After submit, employee receives task or alert notification, and coach receives task notification. Coach can still edit form at this point. Employee acknolwedges form and completes tasks, and employee task changes to complete. Coach completes task, and task status changes to complete. Lastly, coach receives alert or message notification. "
id="image2" src="using_bpl_form00003.jpg"
style="margin-bottom: 6pt;" border="0" /> </p>
When I preview the topic in RH and hover my mouse over the image, the alt text appears in the preview window as expected, both in the default window and when I choose to preview in Firefox and IE. However, when I generate the WebHelp and hover my mouse over the images, nothing shows up at all, and the alt text is replaced by the file name:
<p class="widegraphic"></p>
<div align="left"><img alt="using_bpl_form00003.jpg" style="margin-bottom : 6pt; " id="image2" src="using_bpl_form00003.jpg" />
</div>
If, however, I manually copy and paste the alt text into the screen tip field of the image in the RH topic, the alt text does appear in the WebHelp output:
<p class="widegraphic"><img alt="Coach completes form and can either submit now or save it as a draft, edit it, and submit it later. After submit, employee receives task or alert notification, and coach receives task notification. Coach can still edit form at this point. Employee acknolwedges form and completes tasks, and employee task changes to complete. Coach completes task, and task status changes to complete. Lastly, coach receives alert or message notification. "
id="image2" src="using_bpl_form00003.jpg"
title="Coach completes form and can either submit now or save it as a draft, edit it, and submit it later. After submit, employee receives task or alert notification, and coach receives task notification. Coach can still edit form at this point. Employee acknolwedges form and completes tasks, and employee task changes to complete. Coach completes task, and task status changes to complete. Lastly, coach receives alert or message notification."
style="margin-bottom: 6pt;" border="0" /> </p>
This seems like a pretty major bug to me. I know there have been scripts developed to delete the alt text so that graphic filename won't show up as the alt text, but is there anything that will take the existing alt text and populate the screen tip/title property with it, which seems to be the key to getting this to work in the output? There's no way I can manually copy and paste all the alt text into the images in RH, especially because I'll just end up having to redo it every time I update the linked FM files.
Thanks,
Jackie

Hi Jackie,
Offhand, your ALT string seems long. A quick search yielded info at http://www.htmlcodetutorial.com/images/images_famsupp_85.html
If a lengthy description is needed to describe the image, use the LONGDESC attribute to point to the URL of another page which has the lengthy description. Because LONGDESC is not yet sufficiently supported, also follow the image with a "D-link". A D-link is a standard anchor link with contents consisting of the capital letter "D", like this:
Do you experience the same behavior with short alt strings as well?
-Matt
@mattrsullivan

Variable Text not appearing in Report

Similar Messages

Maybe you are looking for