VBA SmartView - Adding Pivot Tables

Does anyone know in SmartView using the VBA function to pull in reports what argument to give for pivot table views.
The following code brings in a report:
obiee.InsertView(DiscoveryURL, ReportLocation, ViewName, prompts, Default_Format, SameSheet)
Where I have view name set as "tableView!1"
However there is also a pivot table view (default name) that I can't bring in using at a guess pivotView!1 - I can't find details on this anywhere.
Regards,
Simon

While making Pivot Tables in RTF, make the rows "inline" rather than "outline".

Similar Messages

Excel 2010 Pivot Table VBA Not Refreshing Table

My company recently upgraded from Excel 2003 to 2010. I had VBA written to take source data and convert it into a number of Pivot Tables on a number of worksheets. It has been working fine for years. After upgrading to 2010 the VBA crashed. I tracked it
down to the fact that when my code was making changes to the Pivot Tables (changing fields, filters, etc...) the pivot table on the worksheet had no data, but the fields were there. I can manually go to the pivot table and manually refresh and all the data
comes in.
So I tried adding the VBA code to refresh the pivot table, but the pivot tables will not refresh with data.
I tried:
ActiveSheet.PivotTables("WO Pivot").RefreshTable
and
ActiveWorkbook.RefreshAll
And these did not work.
I also tried recording a macro for the manual steps to refresh and got:
ActiveSheet.PivotTables("WO Pivot").PivotCache.Refresh
This does not work either.
The PivotTable name is correct, but I tried using the number as well, and the name works for other code manipulating the the pivot table.
e.g.:
With ActiveSheet.PivotTables("WOPivot").PivotFields("Task Title")
.Orientation = xlRowField .Position = 2
.Subtotals = Array(False, False, False, False, False, False, False, False, False, False, _False, False)
End
With Why isn't this working? Is there another way to refresh pivot table data in 2010?
Thanks. P.S. I've tried formating this so it is readable, but it comes out garbled. Hope this looks better.

The solution above didn't work for me, but the following did the trick:
ActiveSheet.PivotTables("WOPivot").PivotCache.Refresh
By the way, I identified it by recording a macro, then going on the Pivot Table that needed refreshing and pressing F9 to refresh it. The line of VBA code above was the result.
Cheers,
Marco.

Adding a pivot table while creating report in BI publisher

Hi all,
I have been working on OBIEE and i need to create a multipage report. I have created a report in BI Dashboard using pivot table and i like to create the same pivot table (as pdf report) by using BI publisher.
But i am unable to add pivot table in the rtf file that is used as template.
When i am creating a template in rtf format, it has only three option either you can add table or form or Cross tab. I have tried to add the pivot table but i didn't find any way to add that.
Pls suggest me to solve this.
Thanks
Ashok

Please look at the hyperlinks description in the rtf template section of the report designer guide. It should get you started.

Suppressing Columns in Pivot table when adding subtotal

Hi,
We have a dimension hierarchy like this:
Level 1 ---> Level 2 ---> Level 3
T ---> A ----> B1
T ---> A ----> B2
T ---> C ----> D
T ---> E ----> E
The report we are trying to build is of this format:
Row_Num --> Dimension --> Amount
1 --> B1 ---> 100
2 --> B2 ---> 50
3 --> A ---> 150
4 --> D ---> 75
5 --> C ---> 75
6 --> E ---> 100
When using Pivot table and subtotals, we are getting the report as below: (where for Dimension Value "E" there are two rows)
Row_Num --> Dimension --> Amount
1 --> B1 ---> 100
2 --> B2 ---> 50
3 --> A Total ---> 150
4 --> D ---> 75
5 --> C Total ---> 75
6 --> E ---> 100
7 --> E Total ---> 100
We do not want the subtotals to be calculated if Level 2 and Level 3 are the same.
Any ideas on how to achieve this?
Many Thanks,
Seetharam

Hi user7276913,
Are you sure you are using a Pivot Table view? Or are you using the standard table view?
In a pivot table, you can only have (n-1) sub-totals where n is the number of fields in your "Rows" section. So in your case you have two fields, so you can only have 1 sub-total. See my screen shot below where I have a similar situation:
!http://i47.tinypic.com/icux5y.png!
Note that in the screen shot only the first column has a summation and the second does not. This makes sense since a sub-total and the last column would be the same as the values being displayed in the "measures" section.
What you described in your post seems more like what I'm seeing in a standard table view
!http://i48.tinypic.com/34z12zp.png!
Based upon what I'm seeing in your sample report, it seems like you are missing some kind of line item number or transaction number or some field that uniquely determines a row. If you add this field into the pivot table you will get exactly what you want.
e.g. Pivot Table Rows = Customer # (with summation Enabled) , Document Type (Summation Enable), Line Number
Good luck and if you found this post useful, please reward points!
Best regards,
-Joe

Pivot Table - adding row header detail

I've created a pivot table output using template builder for word plugin (10.1.3.4.2)
xml
<XXNCC_APEDI_3PINT>
<P_FROM_DATE>2012-01-03T00:00:00.000+00:00</P_FROM_DATE><P_TO_DATE>2012-03-31T00:00:00.000+01:00</P_TO_DATE>
<LIST_G_DELIVERY>
<G_DELIVERY>
<ESTABLISHMENT>Name1</ESTABLISHMENT>
<INVOICE_NUMBER>028993A</INVOICE_NUMBER>
<INVOICE_DATE>07-01-2012</INVOICE_DATE>
<INVOICE_SORT>20120107</INVOICE_SORT>
<INVOICE_PERIOD>Jan-2012</INVOICE_PERIOD>
<AMOUNT>60.48</AMOUNT>
<PRODUCT>D16</PRODUCT>
<PRODUCT_DESC>PAST MILK SEMI CTN</PRODUCT_DESC>
<ORDER_QTY>288</ORDER_QTY>
<UNIT_COST>.21</UNIT_COST>
<LINE_COST>60.48</LINE_COST>
<LINE_UNIT>1</LINE_UNIT>
<SERVING>200ML</SERVING>
</G_DELIVERY>
<G_DELIVERY>
<ESTABLISHMENT>Name1</ESTABLISHMENT>
<INVOICE_NUMBER>028993A</INVOICE_NUMBER>
<INVOICE_DATE>07-01-2012</INVOICE_DATE>
<INVOICE_SORT>20120107</INVOICE_SORT>
<INVOICE_PERIOD>Jan-2012</INVOICE_PERIOD>
<AMOUNT>61.74</AMOUNT>
<PRODUCT>D17</PRODUCT>
<PRODUCT_DESC>PAST MILK WHOLE CTN</PRODUCT_DESC>
<ORDER_QTY>294</ORDER_QTY>
<UNIT_COST>.21</UNIT_COST>
<LINE_COST>61.74</LINE_COST>
<LINE_UNIT>1</LINE_UNIT>
<SERVING>200ML</SERVING>
</G_DELIVERY>
_______________________Date1_________Date2_______Date3___
Establishment_______________________________________
___________Product______99__99.99___99__99.99____99__99.99__
<crosstab:c547;"//G_DELIVERY";"ESTABLISHMENT{,o=a,t=t},PRODUCT{,o=a,t=t}";"INVOICE_DATE{INVOICE_SORT,o=a,t=n}";"ORDER_QTY,LINE_COST";"sum"?>
All I want to do is add a new field after Product - Description.
I've tried a number of combinations but nothing displays - and now I'm going in circles.
Something to do with being within <?for-each:.//R2?> ?
I can change the xml to do what I want but that seems un-necessary!
Thanks in advance
Edited by: GaryWW on 25-May-2012 03:29

I've created a pivot table output using template builder for word plugin (10.1.3.4.2)
xml
<XXNCC_APEDI_3PINT>
<P_FROM_DATE>2012-01-03T00:00:00.000+00:00</P_FROM_DATE><P_TO_DATE>2012-03-31T00:00:00.000+01:00</P_TO_DATE>
<LIST_G_DELIVERY>
<G_DELIVERY>
<ESTABLISHMENT>Name1</ESTABLISHMENT>
<INVOICE_NUMBER>028993A</INVOICE_NUMBER>
<INVOICE_DATE>07-01-2012</INVOICE_DATE>
<INVOICE_SORT>20120107</INVOICE_SORT>
<INVOICE_PERIOD>Jan-2012</INVOICE_PERIOD>
<AMOUNT>60.48</AMOUNT>
<PRODUCT>D16</PRODUCT>
<PRODUCT_DESC>PAST MILK SEMI CTN</PRODUCT_DESC>
<ORDER_QTY>288</ORDER_QTY>
<UNIT_COST>.21</UNIT_COST>
<LINE_COST>60.48</LINE_COST>
<LINE_UNIT>1</LINE_UNIT>
<SERVING>200ML</SERVING>
</G_DELIVERY>
<G_DELIVERY>
<ESTABLISHMENT>Name1</ESTABLISHMENT>
<INVOICE_NUMBER>028993A</INVOICE_NUMBER>
<INVOICE_DATE>07-01-2012</INVOICE_DATE>
<INVOICE_SORT>20120107</INVOICE_SORT>
<INVOICE_PERIOD>Jan-2012</INVOICE_PERIOD>
<AMOUNT>61.74</AMOUNT>
<PRODUCT>D17</PRODUCT>
<PRODUCT_DESC>PAST MILK WHOLE CTN</PRODUCT_DESC>
<ORDER_QTY>294</ORDER_QTY>
<UNIT_COST>.21</UNIT_COST>
<LINE_COST>61.74</LINE_COST>
<LINE_UNIT>1</LINE_UNIT>
<SERVING>200ML</SERVING>
</G_DELIVERY>
_______________________Date1_________Date2_______Date3___
Establishment_______________________________________
___________Product______99__99.99___99__99.99____99__99.99__
<crosstab:c547;"//G_DELIVERY";"ESTABLISHMENT{,o=a,t=t},PRODUCT{,o=a,t=t}";"INVOICE_DATE{INVOICE_SORT,o=a,t=n}";"ORDER_QTY,LINE_COST";"sum"?>
All I want to do is add a new field after Product - Description.
I've tried a number of combinations but nothing displays - and now I'm going in circles.
Something to do with being within <?for-each:.//R2?> ?
I can change the xml to do what I want but that seems un-necessary!
Thanks in advance
Edited by: GaryWW on 25-May-2012 03:29

Adding Cumulative Percentages to Pivot table

Hi all,
I am trying to add a Cumulative Percentage to a pivot table in Hyperion IR 11:
Month joined     July     August     September     October
Sales          5     3     2          0
Accounts     2     1     0          1
Marketing     0     8     5          2The pivot facts are the number of employees joining the department and the row label is the department.
I am trying to add a running cumulative percentage in the pivot table for each month. Example, the cumulative percent in July will be 71.4% [5/(5+2)] under Sales department and 100% under Accounts department (71.4 + 28.6 of Accounts). For month of August, the cumulative percent will reset the calculation to be that it will be 25% [3/(3+1+8)] for Sales in August. The expected pivot table is something like that:
Month joined     July          August          September     October
Sales          71.4          25          28.5          0
Accounts     100          33.3          28.5          33
Marketing     100          100          100          100The underlying table is as follows:
Month joined     Department     No of employee
July          Sales          5
July          Accounts     2
July          Marketing     0
August          Sales          3
August          Accounts     1
August          Marketing     8
September     Sales          2
September     Accounts     0
September     Marketing     5
October          Sales          0
October          Accounts     1
October          Marketing     2I have tried using the Add Cume function but am not able to give the correct figure.
Has anybody had any suggestions on how to produce the cumulative percentage in the pivot?
Thanks in advance.

Hover text is possible with static text but your requirement would not be possible to display value unless its hardcoded

Check if refreshing data in pivot table was finished

Hello guys,
This is my first post here so forgive if I'm asking in wrong place.
Maybe you can help me or give me some hint how can I check if data in pivot tables refresh event was finished.
So I'm using excel plugin that allows to load excel spread sheets from external source e.g application server,
in this reports there are define some pivot tables with olap connections. When report is opened data is automatically refreshed,
what I'm trying to do is somehow check if this refresh was finished and start manipulating data in c# but I'm not able to check
if refresh was finished or it's still going.
I found that query table has refreshing flag which indicates if some query is running. But I'm not able to get to querytable object or to listobjects object, I'm using excel 2013 and only when I added sql database connection to sheet there was value
in listobject object but still querytable was empty,
What I'm doing wrong ?
public void refrestTest()
Excel.Sheets test= excelApp.ActiveWorkbook.Worksheets;
foreach (Excel.Worksheet displayWorksheet in test)
if (displayWorksheet.ListObjects.Count > 0)
var pp1 = displayWorksheet.ListObjects.get_Item(1).QueryTable.Refreshing;

Hi,
This is the forum to discuss questions and feedback for Microsoft Excel, I'll move your question to the MSDN forum for Excel
http://social.msdn.microsoft.com/Forums/en-US/home?forum=exceldev&filter=alltypes&sort=lastpostdesc
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

UI performance testing of pivot table

Hi,
I was wondering if anyone could direct me to a tool that I can use to do performance testing on a pivot table. I am populating a pivot table(declaratively) with a data source of over 100,000 cells and I need to record the browser rendering time of the pivot table using 50 or so parallel threads(requests). I tried running performance tests using JMeter, but that didn't help.
This is what I tried so far with JMeter:
I deployed the application in the integratedweblogicserver and specify the Url to hit in JMeter ( http://127.0.0.1:7101/PivotTableSample-ViewController-context-root/faces/Sample) and added a response assertion for the response code 200. Although I am able to hit the url successfully, the response I get is a javascript with a message that says "This is the loopback script to process the url before the real page loads. It introduces a separate round trip". When I checked in firebug, it looks like request redirect of some sort happens from this javascript to another Url (with some randomly generated parameters) which then returns the html response of the pivot table. I am unable to hit that Url directly as I get a message saying "session expired". It looks like a redirect happens from the first request and then session is created for that request and a redirect occurs.
I am able to check the browser rendering time of the pivot table in firebug (.net tab), but that is only for a single request. I'd appreciate it if anyone could guide me on this.
Thanks
Naveen

I found the link below that explains configuration of JMeter for performance testing of ADF applications(Although I couldn't find a solution to figure out the browser rendering time for parallel threads).
http://one-size-doesnt-fit-all.blogspot.com/2010/04/configuring-apache-jmeter-specifically.html
Edited by: Naveen Ramanathan on Oct 3, 2010 10:24 AM

Pivot Table - Calculate Variance - Hidden Fields?

I need some help adding a target value field inside a pivot table in excel.
Here is what my current pivot table looks like.
Regions                 1 year - Actual              1 year - Target??
Difference
                  (April 2013 to MArch 2014)
(Target - Actual)?
Region1                $6,355,696.75
Region2                $6,775,309.87
Region3                $2,230,424.76
Regions expand into managers which in turn expand to consultants.
What I want to do is add a column for target values of the 3 different regions and then create another calculated field that will show the difference between the target and actual values.
Can this be done without writing any stored procedures in SQL? I want to do this in excel itself.
The target values are not calculated so can we store them in hidden fields or something in the pivot or excel?

1. Click anywhere in Pivot and go to Options tab > Formulas > Calculated Field.
2. Create a calculated field called Target (whatever name your choose). If your target is say 7000000, put this value in Formula field. You may put it with or without =
3. Now after this, you can once again create a new Calculated Field. Let's say this is Variance. If you variance is Target - Actual, put this as =Target-Actual in Calculated Field.
4. Your pivot will have whatever you wanted.

Excel Pivot Table with Date Hierarchies - query performance degradation

For the sake of this explanation, I’m going to try and keep it simple. Slicing the data by additional dimensions only makes the issue worse. I’ll keep this description to one fact table and three dimensions. Also, I’m fairly new to SSAS Tabular; I’ve worked
with SSAS Multidimensional in the past.
We’ve got a fact table that keeps track of bill pay payments made over time. Currently, we only have about six months of data, with the fact row count at just under 900,000 rows. The grain is daily.
There is an Account dimension (approx. 460,000 rows), with details about the individual making a payment.
There is a Payment Category dimension (approx.. 35,000 rows), which essentially groups various Payees into groups which we like to report on: Automobile Loan, Mortgage, Insurance, etc.
There is the requisite Date dimension (exactly 62093 rows-more days than we need?), which allows visibility as to what is being paid when.
Using this DW model, I’ve created a SSAS BISM Tabular model, from which Excel 2010 is ultimately used to perform some analysis, using Pivot Tables. In the tabular model, for easier navigation (doing what I’ve always done in SSAS MultiDimensional), I’ve created
several Date Hierarchies, Year-Month, Year-Quarter-Month, etc.
There are currently only two measures defined in the Tabular model: one for the “Sum of PaymentAmount”; one for the “PaymentsProcessed”.
OK, in Excel 2010, using a Pivot Table, drag the “Sum of PaymentAmount” measure to the Values section, next to/under the PivotTable Field List. Not too exciting, just the grand total of all Payments, for all time.
Drag the “YearMonth” hierarchy (from the Date dimension) to the “Column Labels” section. After expanding the year hierarchy to see the months, now the totals are for each of the months, for which we have data, for June through November, 2013.
Drag the “PaymentCategory” (from the Payment Categories dimension) to the “Report Filter” section. Filter accordingly: We just want to see the monthly totals for “Automobile Loans”.
Now, some details. Drag the “AccountSK” (hiding the actual account numbers) to the “Row Labels” section. This shows all accounts that have made Automobile Loan payments over the last six months, showing the actual payment amounts.
So far, so good. Remember, I’m using a Date Hierarchy here, in this case “YearMonth”
Now, if any of the other attributes on the Account dimension table, say “CreditScore”, or “LongName”, are subsequently dragged over to the “Row Lables” section, under the “AccountSK”, the results will never come back, before timing out or by giving up and
pressing ESCape!
If this exact scenario is done by removing the Date Hierarchy, “YearMonth” from the “Column Labels” and replace it with “Year” and “MonthName” attributes from the Date dimension, these fields not being in any sort of hierarchy, adding an additional “Account”
attribute does not cause any substantial delay.
What I’m trying to find out is why is this happening? Is there anything I can do as a work around, other than what I’ve done by not using a Date Hierarchy? Is this a known issue with DAX and the query conversion to MDX? Something else?
I’ve done a SQL Profiler trace, but I’m not sure at this point what it all means. In the MDX query there is a CrossJoin involved. There are also numerous VertiPaq Scans which seems to be going through each and every AccountSK in the Account dimension, not
just the ones filtered, to get an additional attribute (About 3,600 accounts which are “Automobile Loan” payments.).
Any thoughts?
Thanks! Happy Holidays!
AAO

Thanks for your reply Marco. I've been reading your book, too, getting into Tabular.
I've set up the Excel Pivot Table using either the Year/MonthName levels, or the YearMonth hierarchy and then adding the additional attribute for the CreditScore.
Incidentally, when using the YearMonth hierarchy and adding the CreditScore, all is well, if the Year has not been "opened". When this is done, I suspect the same thing is going on.
From SQL Profiler, each of the individual MDX queries below (formatted a bit for readability).
Thanks!
// MDX query using separate Year and MonthName levels, NO hierarchy.
SELECT
NON EMPTY
Hierarchize(
DrilldownMember(
CrossJoin(
{[Date].[Year].[All],[Date].[Year].[Year].AllMembers},
{([Date].[MonthName].[All])}
,[Date].[Year].[Year].AllMembers, [Date].[MonthName]
DIMENSION PROPERTIES PARENT_UNIQUE_NAME,HIERARCHY_UNIQUE_NAME
ON COLUMNS,
NON EMPTY
Hierarchize(
DrilldownMember(
CrossJoin(
{[Accounts].[AccountSK].[All],[Accounts].[AccountSK].[AccountSK].AllMembers},
{([Accounts].[CreditScore].[All])}
,[Accounts].[AccountSK].[AccountSK].AllMembers, [Accounts].[CreditScore]
DIMENSION PROPERTIES PARENT_UNIQUE_NAME,HIERARCHY_UNIQUE_NAME
ON ROWS
FROM [PscuPrototype]
WHERE ([PaymentCategories].[PaymentCategory].&[Automobile Loan],[Measures].[Sum of PaymentAmount])
CELL PROPERTIES VALUE, FORMAT_STRING, LANGUAGE, BACK_COLOR, FORE_COLOR, FONT_FLAGS
// MDX query using separate YearMonth hierarchy (Year, MonthName).
SELECT
NON EMPTY
Hierarchize(
DrilldownMember(
{{DrilldownLevel({[Date].[YearMonth].[All]},,,INCLUDE_CALC_MEMBERS)}},
{[Date].[YearMonth].[Year].&[2013]},,,INCLUDE_CALC_MEMBERS
DIMENSION PROPERTIES PARENT_UNIQUE_NAME,HIERARCHY_UNIQUE_NAME
ON COLUMNS,
NON EMPTY
Hierarchize(
DrilldownMember(
CrossJoin(
{[Accounts].[AccountSK].[All],[Accounts].[AccountSK].[AccountSK].AllMembers},
{([Accounts].[CreditScore].[All])}
,[Accounts].[AccountSK].[AccountSK].AllMembers, [Accounts].[CreditScore]
DIMENSION PROPERTIES PARENT_UNIQUE_NAME,HIERARCHY_UNIQUE_NAME
ON ROWS
FROM [PscuPrototype]
WHERE ([PaymentCategories].[PaymentCategory].&[Automobile Loan],[Measures].[Sum of PaymentAmount])
CELL PROPERTIES VALUE, FORMAT_STRING, LANGUAGE, BACK_COLOR, FORE_COLOR, FONT_FLAGS
AAO

Sorting on a total column or calculated column in a pivot table

We have a pivot table showing customer activity by month. We have added a calculated field to show the YTD average instead of a total column. Is there a way to sort on this calculated field? We have applied a sort on the measure in the criteria, and our resulting pivot table sorts by the values in the most recent month, not by the YTD average.

I think we cant sort when we use a pivot view becoz all the rows are already fixed. Say your rows are sales and volume and columns are year 2007 and 2008, imagine if you r given the sorting ability then if number of units solds is more then it need to change the rows (but in pivot table rows are fixed). So, we cant sort in pivot tables!!

Small doubt(about pivot table)

while creating a report i am getting error in Table view,if i create a same report in pivot view it is working fine in pivot view.
after this i want to add this view to the compound view then i will have to delete the table view from the compound view .but while adding the pivot view to the compound view it is throwing error because by default compound view has only table view and tital view.it is not allowing me to add pivot view to the compound view.
can anyone suggest me is there any other way i can add the pivot view to compoud view i want to view the title view and pivot view only in the compond view.(here the problem is i am unable to add pivot view to the compound view because error in the table view)

Actually i placed couple of column in the excluded. now its working fine. i just want to know how can i add pivot tabler to the compound view at this situation

Pivot Tables in BI Publisher

When including multiple Criteria in the "Rows" section of Pivot Table we get a desired format of Pivot Table in BI Analytics Answers. However, when creating a Pivot Table in a BI Publisher Template, Adding multiple measures in "Rows" results in the creation of duplicate rows.
For example, the desired format is as follows:
https://docs.google.com/spreadsheet/ccc?key=0AisK8m4TPhzKdDMzeDhfUjBZNTF5NWhleEEtX3piLXc&hl=en_US#gid=0
this appears in BI Analytics Answers.
However, when this table is made in BI Publisher Template, the format is as follows:
https://docs.google.com/spreadsheet/ccc?key=0AisK8m4TPhzKdFlDQjBGU0NORWltNXp3STE1WTJZUVE&hl=en_US#gid=0
Please help on how to obtain a pivot table in BI Publisher in the desired format.
Regards

While making Pivot Tables in RTF, make the rows "inline" rather than "outline".

To export pivot table from excel and save as picture using powershell

I am trying to automate my work by attaching an excel file to email and send it across using powershell . But also, I want to paste the screenshot of pivot table to my email body .
One way to do it is to save only the pivot table as picture format like jpeg or png , then attach this picture to the email body .
I am looking for an powershell script which will save my pivot table as picture format . I am using powershell V1.0
please help .

I'm not familiar with PowerShell script, we usually use VBA script within excel.
The following article describes how to export Excel Range to a Picture File and attach it as the email body by VBA code, it might not be the answer you are looking for, but hope it will give you some inspirations.
http://www.jpsoftwaretech.com/export-excel-range-to-a-picture-file/
Also you can post your question to PowerShell forum to get better support.
Best Regards,
Wind Zhang

Command link in adf pivot table

Hi,
I Created one View Object (WrkVOR) Based on below query
Select Desc1,Desc2 ,Date,Sum(Amount) From populate_wrk Group by Desc1,Desc2 ,Date
Based on View Object we created pivot table
Rows - Desc1 ,Desc2
Column - Date
Amount will come under each date (Like Matrix report)
Up to It is working fine
i added a command link on data(Amount) when i click the command link i am getting below error
DVT-2015 Slice 1 Exceeds boundary -3
please help....
Thanks
shk

Hi,
the real problem of the original poster seems to be <af:commandLink text="#{row.GlobalDealId}" id="cl1" action="createMDM" immediate="true" partialSubmit="true"> having immediate set to true in which case the request goes from restore view to render response. You usually use immediate=true on a command item to cancel an action (bypassing all the other JSF lifecycle steps).
Peter551059,
you don't give us much information about your case. So if the problem is IE9 and you verified IE9 is supported for the version of JDeveloper you use, then - in case you have a support contract - my best advise is to file a service request and have support looking at it just in case you hit a defect that should be filed as a bug
Frank

VBA SmartView - Adding Pivot Tables

Similar Messages

Maybe you are looking for