Vendor creation from ROS to ECC

Hi ,
I have to create vendor from ROS client to ECC with the financial details . Is there any BAPI available for that.
Regards
Raul

Hi Raul,
We are also using SUS and our ROS client is the same as our SUS client. Hence after the purchaser in SRM has accepted the suppliers who have been registered in ROS, these suppliers are pushed to SUS (same as ROS) and their status changes to released.
We have a very complex situation/requirement from client and there are approval cycles before a vendor is created in ECC. This will not be of any use to you.
However I can help you out with your requirment.
Enhance the SRMSUS BSP page to include tax and financial detail fields and force the supplier to fill these fields when he is pushed into SUS by the Purchaser in SRM. Once the supplier saves this information, use an RFC program call to create a vendor in ECC with these details.
Regards,
Nikhil

Similar Messages

Vendor replication from SUS to ECC 6 backend in SRM 7.01

Dear Gurus,
1. Vendor registration in ROS: Vendor's are registered in ROS and stay there as preapproved vendors. They can be replicated to SRM system through OPI calls. How these suppliers are replicated to backend MM system?
2. I get to know that from SRM 7 enhpk 1 facilitates transfer of vendor data from SRM SUS to SAP ERP. A business partner monitor cockpit is available in SUS/ROS. Do we need to upgrade our ECC system to ECC 6.0 enhpk 5 or ECC 6.0 enhpk 4 will do to avail these functionality?
Any input on these will be highly appreciated.
Thanks and regards,
Ranjan

Hi Ranjan,
As of now without Ehp1, vendors are replicated to backend MM systems using a PI scenario "Supply_base_management".
And you are right, from Ehp1 vendor replication will be handled as you mentioned and ECC Ehp4 will support that.
Nikhil

Vendor Creation from external system

Hi there,
I have a requirement from the user:
An external system is used for vendor registration. The current process is where users need to create the vendor manually in SAP as there is no integration between the systems.
We can not make amendments to the external system due to business limitations.
The question is, can creation of vendor be automated via an scheduled interface where SAP grabs data from the external system? If yes, care to explain how can it be achieved?
SAP is running on DB2 and the external system is running on Oracle.
Please advice. Thanks!

Hi
I think it can be done.You need to develop a file based Interface.As soon as vendor data files placed in a dorectory program should pick that file and it should call a transaction code XK01 to create a vendor.
I belive this is high level infomation I am giving. A developer or Interface expert can help you.
Hope this will helps you.
Cheers
Umakanth

Milestone Creation from Cprojects in ECC 6

Hi,
I would like to create Milestone in ECC 6 from Cprojects. Iam using Multi level controlling using WBS elements with task based Accounting Integration.
Best Regards,
Joseph.
[email protected]

I do agree that Task in the Cprojects are created as WBS elements in Multi Level Controlling. But can the automatic transfer from task to WBS element, happen with milestones for WBS elements...
Is there any standard way of creating WBS Element Milestone during automatic transfer of Cprojects Task to WBS element in ECC 6.0 system.
Best Regards,
Joseph.
[email protected]

Posting Vendor data from MDM to R3

Hi,
We are trying to post vendor data from MDM to ECC via XI using CREMDM -> CREMAS + ADRMAS and using the standard mapping SAP has provided. I have serialized CREMAS + ADRMAS such that ADRMAS posts before CREMAS. ADRMAS works fine but CREMAS fails with error "Fill all required fields SAPMF02K 0111 ADDR1_DATA-NAME1". Standard mapping is mapping the no-data value "/" in CREMAS NAME1 field too as recommended.Still it throws this error.
If anyone has worked on similar scenario...Please help.
Thanks,

Hi Swapna,
we had faced the same error.
You will need to enter a value in the name1 field if you want your idoc to post successfully.
even though in the vendor creation transaction name1 is not a mandatory field but for the idoc posting, the name1 field is required.
We solved the error by entering a value in the name 1 field.
Hope this helps.
Jyotika
Pls reward for helpful answers

Vendor text of PO line item replication from SRM to ECC.

All experts,
Users are entering the more informations for individual line item in to Vendor text field available in to SRM Purchase order.
Client requirement is to replicate the Vendor text from PO in SRM to PO in ECC.
Right now system is replicating PO with all information except text.
How I can achieve it. Any help will be highly appreciate.
Thanks in advance.
Parag.

This is due to a program error, and SAP has released a OSS note on this.
Please check if this OSS Note applies to you. Note number - 1129291
Do reward points if useful.

How to stop PR creation from PM work order for a particular vendor?

Hello Experts,
We have following scenario for breakdown maintenance activities.
When a machine breaks down, a breakdown order is created in SAP. The external manintenance services are planned in the order. When the order is released, a single PR (with multiple item numbers corresponding to number of services) is created by SAP. The PR has a release strategy. When PR is released, PO is created followed by the SES.
The practice followed AS -IS for breakdown outside business hours:- If the breakdown happens outside business working hours, the person releasing the PRs is not available & hence PR can not be released resulting in no PO & no subsequent SES.
In this case, the maintenance is completed by the external agency & the work order is TECO. The next day, TECO is reveresed, new PR is created, released, converted into PO, & then SES.
TO-BE process:- Client expects that, for certain vendors identified, PR should not get created at all from the breakdown order. (The list of vendors will be maintained seperately). For these vendors, a framework order will be created at the start of fiscal year & SES will be created as & when required agaainst the framework order.
My concern is :- How to stop PR creation from PM work order for a particular vendor? OR delete the created PR?
Highly appreciate your quick response.
Thank you.
Amit
Note:- My ABAP consultant has checked following BADI's, but could not find it useful.
IWO1_ORDER_BADI
ORDER_COSTING_CK
DATA_EXTENSION_CK
VALUATION_CK
ME_REQ_OI_EXT
IWO1_PREQ_BADI
ME_CHECK_SOURCES
ME_REQ_POSTED
IWO1_ORDER_BADI

Dear Amit
I am giving a different dimension to your question check if it fulfills your requirement -
As we know Vendor selection comes at a later stage only after your PR creation, approval & RFQ etc. & PR generation from maintaine. order is controllled through control key PM03. While triggering PR from order you have to specify Material group, Purchase group and vendor. Try to control it through authorisation as all these are authorisation objects. The persons executing breakdown order shall no t be given this authoriations
shakti

Function Module to send Vendor Master Data from SRM to ECC

Hi Guys
I heard there is a function module in SRM which can send Vendor Master Data from SRM to ECC please confirm for me if there is such a function Module and what is it called. Thanks

Hi,
Vendor Master data is replicated to SRM from ECC. Standard Transactions (BBPGETVD,..) will be used to replicate the data from ECC.
Vendor Master will exists in ECC, so there is no point in sending the same back from SRM to ECC. If the requirement is the other way around, we can use the transaction BBPGETVD in SRM system.
Hope this helps.
Regards,
Hemanth

I want to exclude certain vendors up front of proposal creation from F110

Hi,
I want to exclude certain vendors up front of proposal creation from T.code F110.
Meaning - I would use the range 850000 - 999999, but I would also like to exclude for example vendor #'s 912271, 912771, 959281 from this proposal.
Currently the only way to exclude a vendor is to skip it from the proposal after it creates.
But is there anyother to overcome with this issue because it requires lot of time to find vendor and then delete it.

Hi,
Its possible to exclude with the help of field LFA1-NAME1 in the free selection screen. Select the field, give the names and mark exclude values indicator.
Hope this helps.
Thanks
Krishna.

Vendor publish not working from Sourcing to ECC

Hello Experts,
When we are publishing vendor from SAP Sourcing to ECC status becomes waiting for replicated and gives no error but XML is not getting created in FTP outbound folder and due to this vendors are not being able to published from sourcing to ECC. We have checked the integration setting and these seems to be fine as RFX award publish is working fine from Sourcing to ECC which also uses the same path to integrate.
The issue is in our PRODUCTION system whereas it is working fine in Dev and TEST environment. Are we missing any setttings which generates XML?
Regards,
Rakesh Daiya

Hi Prasad,
Thanks for the response,
Scheduled Tasks are working fine for the import of materials and vendors from ECC and picking the data from the FTP folder.
But only the outbound of vendors not working, i checked in the logs but could not found any errors even in debug logs it is not generating the XML (I checked in the dev instance and while publishing it is creating XML in the logs as well).
Do we need to do any configuration to generate XML when publishing Vendor or its a standard process to do so?
Regards,
Rakesh Daiya

Replicating vendors from SRM to ECC

Hi All,
We are implementing SRM 7.0 EHP1 and we have a SRM-SUS scenario.
We have a requirement where we want to replicate the vendors from SRM to ECC.
I know that there are standard programs and interfaces for replicating vendors from ECC to SRM, but are there any standard programs XI/PI interfaces that are available for replicating vendores from SRM to ECC?
Please share your thoughts....
Thanks in advance!

Hi Jack,
Unfortunately I don't have a config guide for it. Can you speak to your XI/PI consultant and just ask him to configure this scenario in XI/PI.
PS: Before this you should import all SRM related business content in your PI system.
Regards,
Nikhil

Replicate Vendor and Contact Person from SRM to ECC

Hi Expert,
I'm using SRM 7.0 and ECC 6.0 and using extended classic scenario.
any required to replicate vendor master and contact person from SRM to ECC, when we create vendor and contact person in portal, the result should display in SRM and ECC.
My question, Is it possible to replicate vendor and contact person from SRM to ECC? If possible, can you guide me?
Thanks and Regards,

Hi,
sorry..
this problem solved because our client change the business process.
we open screen ECC in portal SRM.
Thanks...

Linking of ECC vendor with SRM ROS supplier in EBP

Hello,
How can we link manualy created ECC vendor with SRM ROS supplier in EBP, I dont have PI system.
Thnks,
Raju

Raju the link is established basically (if i talk purely technical) in table VENMAP.
it has 3 fields...
partner guid| logical_system| vendor number(in logical system)
so here
partner_guid is the guid of the supplier in BUT000
log_sys is the logical system to which you want it to connect it to(in this case ECC logical system)
and vendor is the vendor number in that connecting logical system(means ecc vendor number)
so this creates the link.
but which version of SRM and SUS are you using?

Need to fetch Vendor number from shipment to SD billing document creation

Hi Guru's.
I want to fetch the Vendor number from the Ship Cost document and want to populate on the SD billing document and then corresponding acctg document. Is there any way or user exits available?
Thanks in advance for your help.

Hi
For your requirement you can add a Zfeild in the shipment tables and link that table to the Vendor tables.You can either go with USEREXIT_FIELD_MODIFICATION
Regards
Srinath

From Vendor Creation to Payment of Supplier (New User Here)

Hi,
Can anyone here could help me find a link or any softcopy of document that will help me learn more about the process of vendor creation up to the payment of supplier process. Right now I'm using an Oracle Dev module so we can tests for ourselves how the system works. The problem is that we are all Newbie.
Hoping that someone can help me here.
Thanks,
Ace

echo "alias ls='ls --color=auto'" >> ~/.bashrc
That will append the alias mentioned in post 2 to your .bashrc which is where aliases are stored (you should run this as user for user's bashrc and root for root's bashrc). You will need to logout or issue
source ~/.bashrc
to get it to work.
For example I've aliased ls to ls -sh to give me file sizes
edit: fixed typo
Last edited by SS4 (2011-01-17 21:39:35)

Vendor creation from ROS to ECC

Similar Messages

Maybe you are looking for