Vendor with on line interface

Hi
Need to to provide vendors with the view of all Purchase Orders raised against them along with attached supporting documents with drill-down functionality and version history created by revisions
Need to provide vendors with an on-line interface to acknowledge Purchase Orders manually or electronically
Need to provide vendors with the option to take print-outs of Purchase Orders in PDF file format
How these type of interfaces can be possible with developements. Out line n details answer required.
Regards
Ram

Hi
If possible can u pls give in brief or u hv any pprt or procedure for the same pls fwd to this mail id.
ram.s at aol.in----
and confirm me.
Regards
Ram

Similar Messages

  • Anyone worked with the LIN interface/protocol?

    This is my first post in the forums.  I've been avidly reading the
    posts here for a few months now and look forward to the day I can
    contribute.  Meanwhile, I'm seeking some additional knowledge from
    all you experts out there.
    I've completed the design concept for a series of test systems that
    includes a LIN interface.  Currently, I've selected a PXI board
    from Goepel.  You'll find Goepel's 3072 listed here on NI's
    website.  I am looking at the 3080 which is a combo CAN/LIN
    interface.  It comes with LabView support.  I've also found a
    LIN interface from Pickering.  I've also found circuitry to bridge
    RS232 to LIN, but this is only a physical layer conversion.  I'd
    end up developing the whole protocol if I went that route.
    My question is this.  Are there alternatives that anyone is aware
    of?  It seems such overkill to drop a $2500 board in the system
    just for a simple protocol conversion.  Seems like someone out
    there would have dealt with this...
    Thanks in advance,
    Steve Bishop
    Project Group Lead/Sr. Test
    Engineer
    Kimball Electronics Group
    Jasper, IN  47549
    [email protected]

    Hi techie's,
       I have some doubt's on LIN.
    1.   Master Node has sent a header for which two nodes have responded simultaneously. So there is a collision. Now master resolves this by giving priority to one of the nodes by sending unconditional frames individually to the nodes.
    Doubt is when there a collision how slaves stop behave? As per slave state machine there is a read back and so one of the node should pull back the transmission. Then what about the other node which has succeeded in transmission?
      If error is handled in a master how this works… how above error is handled?
    How synchronization works?
    How slave decides the identifier after getting synchronized with master? Mainly how without a clock only with Tbit period that it has got from sync?

  • F-44 clearing with multiple line item

    Hi All,
    When I am trying to clear 24 invoices of one vendor with payment line item in f-44, in simulation mode it is showing only the last line item amount but when posting the same it is clearing all the invoices. Just need to clarify if it is correct or during simulation mode it should saw the total amount of all the invoices.
    eg. I make payment of Rs 1000 against 24 invoices of one vendor. In Simulation mode it shows Rs 150 of last line item (one invoice)
    Thanks in advance...
    Anish

    Why you want to pay and then clear?
    What transaction code you are using for payment?
    Why do not you use F-58, it will pay, clear and print the cheque also.

  • Runtime error - FBL1N - vendor balance with customer line item

    Hi gurus,
    One scenario where i have assign vendor as customer & customer as vendor in vendor & customer data. also make tick mark for both clearing with vendor & customer.
    when i see the customer report with vendor item it shows me the customer & vendor dues but when i tried to see the vendor balance with customer line item it gives dump error.
    Runtime Errors         PERFORM_NOT_FOUND
    Exception              CX_SY_DYN_CALL_ILLEGAL_FORM
    Error analysis
        An exception occurred that is explained in detail below.
        The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_FORM', was
         not caught in
        procedure "%_LDB_CALLBACK" "(FORM)", nor was it propagated by a RAISING clause.
        Since the caller of the procedure could not have anticipated that the
        exception would occur, the current program is terminated.
        The reason for the exception is:
        The program "RSDBRUNT" is meant to execute an external PERFORM,
        namely the routine "CB_DDF_GET_KNA1 " of the program "RFITEMAP ", but
        this routine does not exist.
        This may be due to any of the following reasons:
        1. One of the programs "RSDBRUNT" or "RFITEMAP " is currently being developed.
        The name "CB_DDF_GET_KNA1 " of the called routine may be incorrect, or
        the routine "CB_DDF_GET_KNA1 " is not yet implemented in the program "RFITEMAP
        2. If the program SAPMSSY1 is involved in the runtime error, one of
        the function modules called via RFC is not flagged as remote-capable.
        (see Transaction SE37  Goto -> Administration -> RFC flag)
        3. There is an inconsistency in the system. The versions of the
        programs "RSDBRUNT" and "RFITEMAP " do not match.
    Warm regards,
    Dhananjay R.

    Hi martin
    still problem was not solved. actually i am working on ECC 6.0 & not required to implement the sap note on development. i had done the configuration in vendor master & customer master for clearing.
    please suggest me.....what to do ?
    Than'x
    Dhananjay R

  • Profit Center population in the Vendor and Customer Line items

    hello
    our client is asking for  getting profit center in the vendor and customer line items  where in the view FBL5n and fbl1n we are not getting the profit center populated - in the new gl i understand that there is a standard report based on the gl account.
    but our business is not satisfied with the report and expecting report at profit center level.
    Can any one suggest any way of doing this.
    regards,
    Vijay

    Dear Vijay,
    Let me provide you my view of solutioning for this. This is an enahcement that needs to be done
    1. You can get the profit center from the given vendor and customer line item at the time of posting, using an enahcement you will be able to capture it.
    2. Existing the profit center field is not populated in the BSIK,BSAK,BSID and BSAD tables
    3. Hence, in the same enhancement once you capture the profit center , you can write the code that profit center is updated in these tables also.
    4. This will help you to do the vendor line item wise selection in the FBL1N,  FBL5N profit center wise.
    Constraints of this solution:
    The only constraint remains where in the for a given document if there are multiple profit center, then the system will do the splitting profit center wise for a vendor line item, which will not populate the profit center in those tables as there is only one field available in the bsid etc.. tables.
    This basically would be the one the soltuion where in as seeen from the end user ther eis no change in the front end interface , the way they are doing always they can do.
    You need to also take care the % of document splitting means cross profit center postings /cross document splitting charactericstics postings and the volume involved in this. so that you can suggest this to your client.
    Regards,
    Bharathi.

  • Profit Centre updation in Vendor or Customer Line item

    Dear All,
    With the concept of New GL, system is configured with profit centre and business area mandatory fields. after posting the document in MIRO and VF01 system is not able to capture the Profit Centre in the vendor or customer line item in " Entry View" where as in  "General Ledger Veiw" PC is capturing properly.
    Business area field is updating in the both the veiws.
    Due to this we could not able to take the vendor or customer line item in the t code FBL1n / 3n. is there config setting missig or else system is behavior correct.
    if sytem is behaving correct in this case how to take the vendor or customer line item with respective profit centre wise.
    Thanks in Advance,
    Sahil. K

    First of all go to SE37 and copy the function module SAMPLE_INTERFACE_00001650 and make a Z one out of it .
    Then code your requirement playing aorund with the structure RFPOS .
    Then Go to FIBF - Settings - Products - Of a customer . Here make a new entry with a Z one of yours as per your convinience .
    Again go to settings - P/S modules - Of customer - Entere here the BTE 1650 and the product that you have created and enter the fucntion module name that you have made the codings in .
    Save the entries .
    Also , in the FM you can keep a break point and check what is the effect that is coming out in the Structure RFPOS after the FM is executed .
    May take the help of an ABAPER for the same .

  • Vendor with multiple bank details....paid to the 1st bank account while inv

    Hello Experts,
    We have a vendor with two bank accounts in the vendor master. Now while making the payment, I mean, which account will the money goes? at the time of F110 , we paid to the 1st bank account in the vendor master..
    Settings in vendor master:
    I 'name' the bank accounts in the vendor master, in the field Bank Type. While posting through MIRO, insert this code into the line item 'Patner bank' and the payment program will pick up the bank account accordingly BUT If I don't add this information to the Patner bank account, than always the first bank account will be picked up..
    I want that even if don't add any info in partner bank in the line item,  at the time of F110 , it should paiy to the 2nd bank account in the vendor master..
    This is a very stupid requiremnt but our users wants like this only.
    Kindly show me some light in this dark tunnel...please.
    regards,
    nupur

    Hi Nupur,
    In vendor master data under 3rd tab where we record all bank details of the vendor left hand side you will find one column 'C' .i.e., Collection authorisation......kindly check this option for your second bank to which you want to make the payment.
    Hope this helps you.
    Regards,

  • Facing an Issue with Payables Open Interface Import

    Hi
    I am facing an issue with the Payables Open Interface Import...
    My Requirement is:
    1. Need to upload the PO, Supplier, Invoice #, Invoice Date details to custom table (through web ADi)
    2. From custom table storing in the AP invoice interface tables.
    3. From Interface table, calling API (Payables Open Interface Import) which wil create the invoive (PO matched)
    Now, If user has given wrong data some reasons....Payables Open Interface Import has rejected that entry....user has checked this and corrected later and trying to create the same invoice with the correcte data....As there is a rejected a line exists on the Header interface, line interface...even though if he pass the correct data in the second time it is cosidering that rejected row and not processing the correct row...
    Can any one suggest on this...
    Regards,
    Bala

    When processing a record, you can check if another ap_invoice_interface record exists for the same invoice number and
    1) Delete the old record and then insert a new one
    OR
    2) Update the old record instead of creating a new one
    Hope this helps,
    Sandeep Gandhi

  • Profit centerwise Vendor and Customer line items view

    Deal ALL,
    We have not activated Business Area.
    We have 10 plant under one company code. Client is booking the vendor and customer invoice as per the cost center and profit center of the plant. Payment and Receipt is also made according the bank maintain for each plant. As one customer or vendor is dealing with all the plants.
    Can any body can help me out how to get the vendor and customer line item display according plant or cost or profit center wise, so we can make or receive payment accordingly.
    Request you all to reply.
    Thanks & Regards,
    Bhadresh

    Hi
    Try the transaction codes for Profit Display by suitable config in TCode O7F1, O7F2, O7F3
    Assign Points if useful
    Regards
    Sanil

  • Partial goods receipt for PO with multiple line items

    Hello All,
    While doing MIGO, for a PO with multiple line items, if one line item is having error, will we be able to go ahead with goods receipt? Or entire material document is blocked for doing MIGO?
    We will be doing a development - in case if there is problem in goods receipt (checking of any parameter, and if it is missing - we will be posting error message)...is it possible to ahead with next line item and still post the material document?
    If partial goods receipt if possible for PO with multiple line items, how do we do it?
    Regards,
    RJS

    Hi
    While doing MIGO, for a PO with multiple line items, if one line item is having error, will we be able to go ahead with goods receipt? Or entire material document is blocked for doing MIGO?
    No. You cannot post the MIGO, if even one of the PO line item is having problem or giving error.
    We will be doing a development - in case if there is problem in goods receipt (checking of any parameter, and if it is missing - we will be posting error message)...is it possible to ahead with next line item and still post the material document?
    If you skip a line irem and do GR with next line item, how will you match quantity & value with the vendor Invoice at LIV ?
    If partial goods receipt if possible for PO with multiple line items, how do we do it?
    Partial goods receipt is possible for PO line items. That means, if PO has 100 qty for line item 1 then you can do GR for 50 now and 50 later depending on the vendors delivery.
    Hope this is what you mean by "Partial Goods Receipt".
    Edited by: Arun R on May 10, 2010 2:03 PM

  • The report in FI which contains Quantity field with every line item

    Hi Gurus,
    What are the reports in Finance which contains Qty field with every Line Item reports & reports that contains user name & System Id in it along with other informations e.g. G/L, Ar, AP
    Thanks & Regds,
    Santosh Rothe

    Hi
    Using the line item display report you can get the required details by changing layout in the output:
    FBL1N: Vendor line item
    FBL3N: G/L line item
    FBL5N: Customer line item
    VVR

  • How to clear multi open item with multi line in FI?

    Hi Colleagues,
         If I select two open items which amount is 50, 50,  and I use FB05 to clear them, now one document with two line generated, one line is I entered outside, the other one is amount 100 open item which clears the 50, 50 two items.
         So is there a way to generate the clearing document like this: a document with 3 lines are generated, one line is I entered outside, the other two is amount 50 and 50?
         Thanks a lot.
    BR,
    Chris

    Hi,
    You can use transaction code F-30 to clear items as this transaction is combination of three transactions viz. F-03, F-44 and F-32. In the transaction code you ca even enter exchange i.e. no need to maintain separately as in case of F-03, F-44 and F-32 picks up the exchange rate as maintained in OB08. Hence there can be separate exchange rate for the same day which is not possible through OB08.
    Hence, you can use only one transaction in case you want to clear G/L through F-03, Vendor through F-44 and Customer through F-32.
    Hope, this solves your issue else revert.
    Regards,
    Tejas

  • FI Open Vendor and Customer Line item

    Dear Experts,
    Do we have to migrate the Tax code in the Vendor and Customer Line Items during data migration?
    I read somewhere that is it not necessary to do so.
    Please advise.
    Thank you.

    Hi ,
         It depends on the legal enviroment and sometimes on the settings used in your system. It is a matter of whether the Tax code information is needed in any circumstance that could arise subsequent to migration.
    Examples where you must migrate the tax codes:-
         i) Deferred VAT is used.
         ii) Prepayments with Gross Display.
        iii) Prompt payment discounts are VAT relevant.
    Kind regards

  • India Localization - AP - Asset Invoice with Tax Lines

    Dear Experts,
    In India Localization If I have Asset Invoice with Tax Lines and If I Perform Mass Additions will Tax Lines also Interfaced to FA or only Asset cost will be transferred FA (Excluding Tax Lines)
    Please help me out.
    Thanks
    Bharath

    Bharath,
    even though the tax lines are independently transferred to mass addition and merged ... it is merged to its owning transaction ... like if the invoice in AP is created for a capital asset using the Capital asset clearing account, the tax lines in that invoice is merged automatically to that invoice cost line in the mass addition stage ... similary for CIP clearing account ....
    Regards,
    Ivruksha

  • Withholding tax lines are being cleared along with other line items

    Hi All,
    While doing J1INCHLN(payment making of TDS), system giving error i.e.
    "Withholding tax lines are being aleared along with other line items"
    Please suggest me in this issue...it would be great help for me.
    Thanks,
    Saisri

    Hi,
    As per my analysis we found some documents, here We have made advance payment to vendors with TDS and again rised invoce to vendors with TDS and these documents have been nockedoff in F-54.
    We have many documents of such nature and as per me it is because of these documents  the system is throwing error. Pls. advice as to how to proceed on this.
    Thanks,
    Saisri

Maybe you are looking for