Vertical value in column chart

Is it possible create value labes in column chart but in vertical position?
Here we have value like 0.5, 0.3, 0.8 but I need create this in vertical.
http://i.stack.imgur.com/sDtUd.png
Someone have any idea?
Best bro.

ilkam wrote:
I thought about it but I have a lot of charts and I can't use this method.
Is it possible to rotate the chart? Line chart rotate 90* to left may solve this problem.
Yes, you can rotate the chart, but only after you convert it to a graphic. You can't rotate a live chart. A rotated Bar Chart would look like this:
You probably would want to turn off the Legend if you do this.
Jerry

Similar Messages

How to display labels ( vertically) in a column Chart

Hi,
      As per my requirement I want to show labels inside the column charts & they must be aligned verically
say ABC is id i want display i want A
                                                      B
                                                       C
    I have tried with Column Charts properties like showvertically =" true" & extendLabelToEnd="true".But i am not getting them vertically aligned .Is that something else also must be done.
Regards
Kalavati singh
[email protected]

Take a look at this blog: http://gerardnico.com/wiki/dat/obiee/presentation_variable
Try it out by providing a default format.
Thanks,
BIPuser

Value range(column chart): management cockpit

Hi friends,
how can i put value range condition in column chart. my situation is like this
I have 10 employees with expereinces 4.1(i.e 4 yrs 1 month),5.5, 1.2, 0.5, 3.5, 0.2, 4, 6, 7 and 8.
I want to present in column chart in x-axis like <1 yrs, 2-4,5-6,>7 and in y-axis count.
How can i achieve this. I maintained calculated keyfigues(for <1 yrs, 2-4,5-6,>7) on key figuer total experience and, in bi report i'm getting correct output. Even total experience is also calculated key figure and perfectly viewing this value in cockpit. But in managment cockpit, remaining calculated keyfigues(<1yrs,2-4,5-6,>7) i'm not getting. So i want to prefer to set value range in chart.
pls suggest me.
thanks,
raju

Hello Raju,
You can achieve this by simply using a User defined Periodization & Time Variable.
http://help.sap.com/saphelp_sem60ep1/helpdata/en/1b/3131375fc9342ae10000009b38f839/frameset.htm
Defining Periodizations
1.     To define a periodization, choose Periodization in the dialog structure.
2.     Choose to switch to change mode.
3.     Choose New Entries.
4.     In the Periodization column, enter a name for the periodization (up to four characters).
5.     In the Fiscal Year Variant column, choose the fiscal year variant on which you want to base the periodization. (The periodization itself is based on periods of the fiscal year variants.)
6.     In the Long Text column, enter a descriptive name for the periodization.
7.     Save your entries and return.
8.     In the list of periodizations, select the periodization you just created.
9.     Choose Interval in the Dialog Structure.
10.     Choose New Entries.
11.     In the Interval No. column, enter a sequential number for each period to be defined, starting with "1".
12.     Specify the left time limit (= Start column) and the right time limit (= End column) of the range by entering the respective period of the fiscal year variant on which it is based.
Eg: In your case you follow this
               Start Column          End Column
Period 1(<1 yrs)           1               12
Period 2(2-4 yrs)                     13               36
Period 3(5-6 yrs)                     37               60
Period 4(>7 yrs)          61               specify the no. of months you want to calculate for
13.     Save your entries and return
In the Cockpit-Frame-Design screen for the mesures(KPI) on the Y-axis you select the check box of Periodization and select this User defined Periodization created by you. You click on the aggregation box too to get the cummulative value for the defioned periods.
Hope this helps. Revert incase of any query or let me know if it doesnot work as I have tried this with quarters and its working fine in my case.
Regards,
Priyanka Singh

[Forum FAQ] How do I add an average line to series group on SQL Server Reporting Services column chart?

Introduction
In SQL Server Reporting Service (SSRS), you may need an average value on column chart.
For the above chart, add an average score line to the chart, you can get which student’s score is larger than average score, and which student’s score is less than average score clearly. This document demonstrates how to add an average line to series groups
on SSRS column chart.
Solution
To achieve this requirement, you can add another values to the chart, change the chart type to line chart. Set the value to average value of the series group and set the line to show only once by using expression. Please refer to the link below to see the
detail steps.
Click the chart to display the Chart Data pane.
Add Score field to the Values area.
Right-click the new inserted Score1 and select Change Chart Type. And then change chart type to line chart in the Select Chart Type window.
Change the Category Group name to Subject. Here are the screenshot for you reference.
Right-click the new inserted Score1 and select Series Properties.
Click the expression button on the right of Value field textbox, type the expression below:
=Avg(Fields!Score.Value,"Subject"))
Click Visibility in the left pane, select “Show or hide based on an expression”, and type in the expression below:
=IIF(Fields!Name.Value="Rancy",FALSE,TRUE)
Name in the expression is one of the Students. Then only one line chart is be displayed by using this expression.
Click Legend in the left pane, type Average_Score to the Custom legend text box.
The report looks like below:
Applies to
Microsoft SQL Server 2005
Microsoft SQL Server 2008
Microsoft SQL Server 2008 R2
Microsoft SQL Server 2012
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Thanks,
Is this a supported scenario, or does it use unsupported features?
For example, can we call exec [ReportServer].dbo.AddEvent @EventType='TimedSubscription', @EventData='b64ce7ec-d598-45cd-bbc2-ea202e0c129d'
in a supported way?
Thanks! Josh

X Axis label of Column Chart

Hello,
I am Plotting column chart based on the data present in datagridview;Column 1(having string Data Type) as my X axis value and Column Y as my Y axis value.On Column chart click event i am fetching x axis and y axis co-ordinates of my column chart and displaying
in Label on my form.But when i click it shows "0" as my x axis cordinate for the clicked column.
As my x axis is having labels as 06:00:00-07:00:00,07:00:00-08:00:00,..........
Below is image of my application
f Chart1.Series(0).Name = "Daily Data" Then
'Chart1.Series(0).XValueType = ChartValueType.Time
Chart1.Series(0).Points(result.PointIndex).XValue.ToString()
'xval = xval.AddHours(Chart1.Series(0).Points(result.PointIndex).XValue)
Label4.Text = "Selected Coordinates are: " & Chart1.Series(0).Points(result.PointIndex).XValue.ToString & ", " & Chart1.Series(0).Points(result.PointIndex).YValues(0).ToString("f2")
End If
Else
If result.ChartElementType <> ChartElementType.Nothing Then
Dim elementType As String = result.ChartElementType.ToString()
Label4.Text = "Selected Element is: " & elementType
End If
End If

You need to get this example from Microsoft. It is a c# project code you just run it in Visual Studio. It shows most everything you can do with a chart. It shows the vb code when you run it and click the vb tab. Near the bottom of the left tree is Appearance
- Labels etc. Also under data types there are date and time examples. This link is also in the forum faqs at the top of the chart forum posts.
Chart examples.
I think you need to tell the chart to use datetime for the labels but I am not sure how and I am not too good with them but that is why I do this to learn things. I would just look in the chart examples from the link I show. That is how I answer most of
the questions here.
Can you reproduce your problem using the simple example from the other question? Otherwise I cant really do much.
Also, most times when you make a simple example you will find the problem or at least understand it better.
So take a look and come back if you cant get it I then I will try too.

SSRS Column Chart Design Returning values in a format different from SSRS -SSAS Query Designer

Hi All,
I have an SSAS cube Measure Group with Multiple Measures that I am attempting to return on one SSRS report and reflect the
values using a ssrs column chart.
My Measure Group (Patients).
Measures:
PatientsOnMeds
PatientOnRelapse
PatientsCounseld
TotalNumberOfPatientsRegisterd
NewlyRegisteredPatients
HealthPersonelTrainef
Demension:
Time (Year) :filtered to 2012 & 2013
In my SSRS query designer I have filtered the above Measures with Time Dimesion year 2012 & 2013
and the data is returned as :
Year |PatientsOnMeds|PatientOnRelapse|TotalNumberOfPatientsRegisterd|NewlyRegisteredPatients|
2012 | 700 | 526 | 25 | 456
2013 | 245 | 245 | 15 | 70
Now the problem is when I return this data on the column Chart it's in messed up mesh
On the chart Data:
-Values :Measures
-Series Group: Dimension
The report values are returned in multiple columns for each value segmented by year i.e year 2012,Year 2013.
I want a single column for each Measure (value) for each single year and The chart axis to reflect the measures(values)
instead of grouping values according to series group.
instead the legend returns:
-Year A -PatientsOnMeds
-Year A -PatientOnRelapse
-Year B -PatientsOnMeds
-Year B -PatientOnRelapse
I would like the legend to reflect on -Year A,Year B in color code that will be highlighted in the column values.
Please point me in the right course if you can.Your insights are highly appreciated.Thank you in advance.

Hi Charlie,
Thank you for your kind response.
In actual I want the legend to show:
-2012
-2013
And the bottom axis to show:
PatientsOnMeds
PatientOnRelapse
PatientsCounseld
TotalNumberOfPatientsRegisterd
NewlyRegisteredPatients
HealthPersonelTrained
Indicating in color code for Year 2012 and Year 2013.
This the challenge that I am struggling with.I hope you understand my scenario.
It aint easy.

Problem with mouse-over value on a column chart (by Series)

Hi.
First of all thanks for any offered tip.
I am having a problem with a column chart.
When I move the mouse over a column it should show a small pop-up (or tip) with the column name (series name) and the value (series value). The problem is that it displays an extra '1' just like the following:
SeriesName
1
X.XXX
How can I remove the extra '1' and only show the name and the value ?
The data is populated by series (manually added).
Mihai.

Hi,
Thanks for the tip Shanthakumar KA.
Yes. It looks like the '1' is coming from the X Axis labels. The chart that I have built does not require any labels on the X Axis, so this was not set (X-Axis labels: Empty). I tried setting this to an empty cell, but the '1' still appears in the mouse-over tip.
It is very weird. If I leave the X-Axis labels empty, I still get the '1' displayed which is very annoing.
Are there any solutions for this except the re-building the tip with a label a.k.a. '[customize the mouse over values|http://xcelsiusandme.blogspot.com/2009/07/xm-sample-7-customizing-mouse-over.html].'
Regards,
Mihai.

Values rotation for 3D Column chart not working

Hello,
I have a 3D Column chart type, using the Apex integration kit for anychart 5.1 and have the Values Rotation set to 90 Degrees.
However this setting or any other does not have any effect on the chart. The decimal_places setting also does not have any
effect.
This is the line in the custom XML
<values show="yes" prefix="" postfix="" decimal_separator="." thousand_separator="," rotation="90" decimal_places="0">
How do i get the values to be rotated?
Thanks in advance,
Sieudial

Hello,
I created a complete example site. An example of a 3D Column you find here: http://anychart.apex-evangelists.com/pls/apex/f?p=755:9:0::NO:::
If you click at the bottom, you see the source I use.
In Anychart 5 the values got replaced by labels, e.g.:
<label_settings enabled="true" rotation="90">
<format>{%Value}{numDecimals:0}</format>
</label_settings>Hope that helps.
Regards,
Dimitri
http://dgielis.blogspot.com/
http://www.apex-evangelists.com/

Vertical axis labels on column chart

I'm trying to get the x-axis labels oriented vertically on a 3D column chart, so that the labels don't overlap each other. With 2D column charts I can do this via "format>chart>format x-axis" but these options are grayed out with the 3D column chart. Is there any way to get vertical orientation on the axis labels with this chart type???

It's usually not necessary to make the axis labels vertical to keep them from overlapping in a 3D chart since when you rotate the chart the labels are vertically offset. But you're right, there's no other control for this.
Jerry

LUMIRA: Values disappear in column Chart

Hi Experts,
I have been working with Lumira, I am using column Chart, but when I put in the dimension X Axis the Dirección. I cannot see all the values (we have nine directions). These values disappear.
If I change the chart to position “Horizontal”, I can see more values but not all.
Could you help us with this issue? Someone has reported this problem?
DGFM

That is very strange - I haven't seen that.
Unless SAP responds here I recommend logging a ticket with SAP Support

Stacked Column Chart Value does not show in Preview or SWF

I have created a simple (one-column) stacked Column chart from an imported Excel 2007 spreadsheet. I am using 3 values and all three are there when I am editing the chart. When I do a Preview or Export it to a .swf file, the third value does not show up. It only shows the first two.
I am running Xcelsius 2008, Version 5.1.3.0, build 12,1,3,495.
Edited by: Rich Krejsa on Apr 9, 2009 9:35 PM

Hi Rich,
Try to rebind the data with the component and preview and see.
Also check with other charts to see if you get the same behaviour.
Try placing a table component and display those cell and see what values are there when you preview.
There could also be posiblities that the third values must be very small as compared to the other two,so check that as well and may be select the secodry scale in the general tab for the 3rd series.
Let me know if this helps.
Thanks,
Amit Mathur.

Xcelsius - Stacked Column Chart - Overall value / Result

Hi *,
does somebody knows how I can display the overall value of my columns in a stacked column chart?
Or is there a workauround to do this?
Thanks and regards,
Markus

Yes, it would absolutely be nice if they provided this option for the stacked charts.
Couple of other options-
Create a bar chart that graphs the totals as one series. Specify that it should show the data values, adjusting an offset so the totals appear to the end/top of the bar, Place the totals chart behind your stacked bar chart. obvioulsy the cahrts have to align precisely.
Another option - concatenate the total amount so it appears as part of teh axis label. This works better for some scnarios than others.
See this video example to get an idea of how this might work.
http://everythingxcelsius.com/2009/06/show-chart-values-without-hovering.html
With SP3, if there are only a few series in your chart, another option you can play with is adding an additional series for each series in your chart. Have a very small value that won't register visually on the chart e.g. .001, and then assign category labels for each series that is total value for a series, and choose to display the lables. Hard ot explain this one well, I 'll see if I can put togeter a simple example. This gets ugly quickly.
I'd love to hear ideas from others.

In column Chart when Y values are grater than y linear axis maximum it doesnt show the Bar

Hi Guys,
In column Chart when Y values are grater than y linear axis maximum it doesnt show the Bar.But i want show the bar upto the max limit of y linear axis without changing the max limit.
Consider following example:
Y values are 80 90 200 300
and following are the output :
Left:When i am not setting maximum property of linear axis.
Right :When i am setting maximum property of linear axis to 200.
In right 4th bar is not visible bcoz value for that bar is 300 which is excedding maxium.But i want the 4th bar to appear same as 3rd bar.
How i can do this?
Thanks in advance.

Are you going to show the bar going past the maximum value?
If not, then you should change the Y value when entered into the array to the maximum value allowed. i.e.
if(itemYValue > maxAllowedValue) {
itemYValue = maxAllowedValue;
Where maxAllowedValue is a variable you set on the application to control the maximum value for the chart.
This is assuming that you are loading the values into an Array before updating the chart dataprovider with that array.

Dsiplay data values and data lables in a stacked column chart

Hi All
Is there a way to display data values and data labels in a stacked column chart. Mouse over or display of labels in legends wont help. It has to be in the chart .
Regards,
anshul

Hi Anshul,
You can display either data value or data label in a stacked column chart by checking the Data Label Displaying Mode option under Format Chart->Data Values.
You can also do the same by checking the same option under Format chart->Area Display->Data Values.
I dont think you would be able to display both in a column chart whereas you would be able to do it in a pie chart.
Hope this helps.
Regards
Sri Harsha

Slider + activating column switches for a column chart

Hi,
I am trying to make an Xcelsius presentation and because I am a bit stuck I thought that may be you could point me to some solution.
It is a three element column chart
+ three status switches for every column chart column (if the switch is On, then the slider should affect (i.e. increase/decrease) the corresponding column, otherwise not)
+ a vertical slider which should increase/decrease only those of the columns for which the corresponding column switches are set On. If no column switch is On, then the slider should not affect any column value.
As I see it, an intermediate subtraction value for every column should be calculated, depending on the corresponding column switch and cur slider value. And this value should be subtracted from the current slider value in order to receive the right current value for every column. I have tried with some formulas but with no success.
Or may be a totally different approach should be taken?
(By the way, is there some way that Excel store/memorize in the excel table the various intermediate values for the corresponding columns, so that they dont always depend on a formula, but after they are calculated they are stored for later processing?)
As I have tried many variants with no success, I am beginning to doubt if this could at all be achieved with Excelsius.
Do you think this kind of functionality could somehow be organized with Excelsius?
Just in case I have put [here|
inspire.wdf.sap.corp\INSPIRE_Share\Raptor_share\tmp\example_frames.zip] (
inspire.wdf.sap.corp\INSPIRE_Share\Raptor_share\tmp\example_frames.zip) example frames, which demonstrate what the functionality should do.
Thanks!
Edited by: Kiril Bratanov on Oct 22, 2009 10:01 AM

Lisa,
Numbers will "wrap" text in a cell if you selec the cell(s) where you want to to wrap and check the box:
If there is more, then please post a screen shot of what you doc currently looks like and what you want to change.
Best Regards,
Wayne

Vertical value in column chart

Similar Messages

Maybe you are looking for