Very limited online access on two occasions

Folks,
I'm on an iMac (running SL, up to date) at my worksite, which is part of a university's research organization. The computer is connected via ethernet.
Last week after waking the computer and logging in to my user account, it would retrieve email from my work account (domain name projects.sdsu.edu), and I was able to load a small number of webpages from the university (in the sdsu.edu domain).
However, I could not connect to ANYTHING else. My two personal email accounts could not be reached, none of my IM accounts could be reached, nor could I view any other websites, including the one for the university's research organization (www.foundation.sdsu.edu). So while I could access other sites at sdsu.edu I could not get into foundation.sdsu.edu.
Incidentally, I use Eudora as a mailreader, so it was checking all 3 of my email accounts, and only able to retrieve the one.
It almost seemed as if someone had installed a block on my computer such that I could only access work-related IPs, but that doesn't explain why I was also unable to get into my employer's main homepage.
I rebooted the computer a couple times, to no avail. I then canvassed a few colleagues, running both PCs and one using a Mac (running Tiger, I believe), and none of them were experiencing any problems with connectivity, including the aforementioned foundation.sdsu.edu.
I tried logging into my bare-bones guest user account, but the problem persisted there. That ruled out something screwy with my own user account. I then tried booting from the SnowLeopard DVD. I was hoping to be able to run Safari but the available apps were limited to a few utilities. So I went ahead and repaired permissions from Disk Utility, while still running off of the SL DVD.
After rebooting, everything was working fine again. I wasn't sure if it was a permissions problem that had been fixed or if it was just coincidental with something else being righted, but I was just happy to be back in business and chalked it up to a freak glitch and went back to work.
Well, a week later, same thing happened. Woke up the computer, logged in, and I see that nothing is connecting, except for that one email account.
This time I tried rebooting, and no luck. Then I tried booting in safe mode--and everything connected just fine. Hmm. I then re-booted normally, and everything continued to work.
Any idea what might be up here? I realize that with only 2 data points, it's not much to go on. It seems the only commonality between the two events is that the problem was fixed after I had rebooted into something other than the two user accounts on the computer. Although I was technically in my user account when I booted in safe mode.
Sorry for the long-winded story, but I didn't want to omit a possibly important detail.
TIA!

You may need to speak to the IT department.

Similar Messages

  • Very Limited Internet access - Download

    I am now a Full Creative Cloud member. Can I download the complete Master Collection Creative Cloud Suite package for easy install onto my computer? I have very limited internet where the work computer is. I can get broadband from another location and would like to fully download the package from there and then take to the work computer for install. Is this possible? Or is it possible to ask for the software on disc?

    G'day Mylenium,
    Cheers mate for the link, however this does not offer the 'most-up-to-date' versions of all the software on offer as a paid 'Cloud' member.
    Surely there is a way for Cloud members to download the most up to date paid software without restrictions for easy install onto a computer that does not have or very little internet access?
    My office computer is located in the country and the only internet available, and very on and off due to poor reception, is 3G mobile coverage. At $49 per month for only 3GBs, this is very expensive, so we use the internet sparingly.
    I do have access to a broadband else where to download content, but I am not allowed nor is it suitable to take along the WorkStation Rig to this broadband location to install downloaded software.
    I am happy to download the occasional update and to have the software do a monthly check in for licencing, but to have to download large files is just not possible.
    I must be missing something from Adobe, surely they have addressed this concern for others before?
    Cheers
    Michael

  • R12 GL - Limiting User Access To Two Accounting Key Flexfield Segments Only

    Hi there,
    Oracle E-Business Suite R12 RUP 4 - General Ledger
    I have a question regarding limiting the Segment values available for data entry to certain Responsibilities or Users. We have 6 segments in our COA. One of the Segments - Campus - has two dependant Segments - Class and Sub-Account.
    What we want to achieve is to allow End Users to add and update only these two Dependant segments that pertain to their Campus through the Standard Oracle Forms. i.e. we don't want them to be able to query any of the other 4 segments and make changes to the values there.
    Any suggestions on how this could be achieved?
    Have a great day.
    Kind Regards,
    Gary.

    Hi Gary,
    The question is regarding maintenance of the Value Sets
    or
    ability of the user to enter values for only these two segments while entering the data?
    Gajendra

  • HT1311 I live in Indonesia and the iTunes store is very limited . Can i use the australian store with my current iTunes log in ?

    Hi , Ilive in Bali Indonesia and my online itunes account is very limited .. How can i keep my apple id and use a different countries store to buy music etc ?

    You can only buy content from your own country's store - to be able to buy from the Australian store you need a valid billing address in Australia and be in Australia when buying from it. Do you have access to other music purchase download sites ?

  • Free case issue - very limited info of cases :(

    Very limited info/spec/images are available for various cases for iPhone 4. It is pathetic that companies don't bother to publish more info when they are reaping millions by selling their cases. It wouldn't take more than an hour to publish more info online. Unhappy with this lethargic behaviour.
    I guess Apple should pressurize some of these companies.
    If any one can give info/inside story/pics/review about following, it would be great!!
    1 Incase smoke & clear - Does smoke have plastic material or rubber? What about scratches?
    2 belkin shield micra (except that single image which keeps floating everywhere)
    3 Griffin motif diamond/smoke - has anyone used it?
    Pixelskin HD has very good videos on youtube and hence so many people might have opted for it.

    The MimeMessage constructor you're using needs to copy the entire message from the server.  It uses the Message.writeTo method, writing the message content into a pipe that is read by the constructor.  It was a bug in previous releases that the writeTo method wasn't fetching the data in chunks, as it does in other cases.  Setting partialfetch=false will revert to the old behavior for writeTo, and for all other accesses of the message content.
    It looks like both 1.4.4 and 1.5.1 are fetching the message content using a single FETCH command when you set partialfetch=false, according to your message.  If they're both sending the same commands to the server, I can't explain why it would be fast in one case and slow in the other.
    I did similar testing using my Exchange 2010 server.  Fetching a similar size message took less than 20 seconds.  Setting partialfetch=false brought it down to less than 5 seconds.  Something's clearly wrong in your environment, but I don't know what.
    Finally, I'm sure you understand that you only need to use that MimeMessage copy constructor in special circumstances, and you should probably avoid using it unless it's absolutely necessary.  Even in the best case it's wasting time and memory.

  • SOAP Basic Authentication - How to create a limited user access

    Hello
    I have a lots of scenarios that use XI´s WebService for integration. For the 3rd party systems be able to use the WebServices, they need an authentication in Web Application Server.
    The question is: How can I create a user with LIMITED access to ONLY ONE Webservice in XI ?
    For example, I want a user called webservice1 that can access only http://myserver:50100/XISOAPAdapter/MessageServlet?channel=:SERVICE:SOAP_Sender_CC.
    I don´t wanna use HTTPS because the 3rd party systems are very limited and they don´t have HTTPS support.
    Thanks

    Yes, I have up the user in the Send Agreement. My SOAP Adapter Communication Chanel is configured there.
    I´m using the correct user in webservice authentication. Its the same I created in SU01.
    Without those authentication configurations (when All users can use the webservice), I can log in with this user. But when I restrict by doing the configurations, it doesn´t work.
    I just made a test by restricting the service for another user and the error message is different.
    When I log with a different user than the configured one, the error is:
    java.security.AccessControlException: USER has no permission for accessing party service :SYSTEM_TEST...
    When I log with the configured user authentication, the error is:
    com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:NO_EXEC_PERMISSION:....
    Seems there´s still some missing configuration.
    Thanks

  • Why the currency format in numbers is very limited into few countries???  I think this is a must have in next update of numbers ..

    I was doing a spread sheet for a business proposal to my colleague in Philippines, was very disappointed to know that the currency format in Numbers for Mac is very limited to few countries only...

    As Badunit suggests, in Numbers 2.3 you can turn on the preference that shows the full currency list.
    Put a value in a cell and then choose Philippine Peso.  Save the document.  Open the document in Numbers 3.0 (if that is what you are working with) and you will still have access to that currency.
    You might go to Numbers > Provide Numbers Feedback to let Apple know you need the option to use more currencies in Numbers 3.
    SG

  • Request online access to your existing individual account

    Hi,
    Can anyone please give the steps to create registration process of - 'Request online access to your existing individual account'
    What is the information required for the registration process, as i want to raise Service Request using without Product (using the SR# or Order No)
    But am not able to create the Account / Register the Account giving the following error: "The specified Order Number is not recognized by the system "
    Can anyone give the steps to raise Service Request without Product (using either SR# or Order No)
    Thanks

    Thanks for your reply.
    In the existing environment there are two AD sites, Two AD and Two exchange server 2010 (ALL roles) are in 1st AD sites. And another one AD and Two exchange server 2010 (ALL roles) 2nd AD sites.
    user cannot facing any problem to login using owa and outlook on 1st AD sites. but user when trying to login owa/outlook on 2nd sites, they facing problem.
    The Error "A server configuration change is temporarily preventing access to your account. Please close all Internet Explorer windows and try again in a few minutes. If the problem continues, contact your helpdesk"
    Need suggestion regarding this issue. please suggest in details how to resolve this issue.
    If you need more information i will provide you. Please suggest. I'm waiting for the reply.
    Thanks..

  • Please recommend personal finance software for Mac that allows month to month analysis of spending by categories.  Quicken on a PC was good at this.  Mint seems very limited.

    Please recommend personal finance software for Mac that allows month to month analysis of spending by categories.  Quicken on a PC was good at this.  Mint seems very limited.

    Quicken for Mac 2007 works just fine (and is said to be compatible with Mavericks).  It is often denounced for not being "modern", but when something works, and does everything I want, I need a good reason to switch. 
    A few years ago (2011), I got that reason when I upgraded OSX and Quicken stopped working due to the absence of Rosetta.  I switched to iBank.  I used it for more than a year.  It was cumbersome, they have no sense of a helpful user interface, but it "works".  I found ONE feature that I liked:  you can attach an image (or any file) to a register entry, so I can save receipts right with the register.
    But when Intuit came out with the revised Quicken 2007 for Mountain Lion, I gladly went back.  I found that being able to update stock prices right in the portfolio view (for those not automatically found online) was handy - in iBank you have to generate a report to see the holdings, and then you have to switch to a view of "Securities" then scroll down through that list to find your stock, then "edit" then change the price, then "Save" then go back to reports and re-generate the portfolio view.  Also, if you enter a stock purchase in a Quicken register, the price you paid gets added to the price history for the stock (as of the date of the transaction).  No such help in iBank.  Most of the helpful UI features (like increasing the date with the + key) are glaringly missing in iBank.  I find I am getting no more than about 3-4 keystrokes before having to move the mouse and click.
    If you are considering sharing the app on an iPad, Quicken won't work, but I found that iBank for iPad doesn't work either.  The interface is completely different from the Mac version, you can't do much with it, and if you have a stock whose price is $11.25 / share and sell 200 shares, you might find that $22.50 gets added to your cash in the account.  (I actually made a few million dollars when it decided that 200 shares at $11.25  yielded $2,250,000.)  Luckly, I received a refund for that app.
    Depending on how the Mavericks switch goes, I hope to be able to stick with Quicken, but I am keeping my records up-to-date in both now, because I can live with iBank.  I will just have to keep an eye on its arithmetic.

  • I HAVE ADOBE PREMIERE ELEMENTS 10.  I used to have many options on the "Disc Menu" to set up my DVD.. and now it is very limited..almost no templates. I try to sign in to my account through Premiere and it will never sign on.  Anyone have any thoughts??

    I HAVE ADOBE PREMIERE ELEMENTS 10.
    Problem #1   I used to have many options on the "Disc Menu" to set up my DVD.. and now it is very limited..almost no templates.
    Problem #2   I try to sign in to my account through Premiere and it will never sign on...just keeps acting like its trying to but never connects.  Anyone have any thoughts??

    JEN-E-FER-FER
    With versions earlier than 11, there is no more Sign In. If you get any message to that effect, ignore and cancel out of them. You should be able to move forward to your import, editing, and exports using the program nonetheless.
    As for the disc menus, those marked photoshop.com plus members only are no longer available to you in versions of Premiere Elements earlier than 11. You may see the thumbnails for those members only items, but they are no longer available to you in Premiere Elements earlier than 10.
    Interestingly, many of them are found in Premiere Elements 11, 12, and 13 as part of the program with no need to purchase them or have any special membership in anything. Adobe has promoted Adobe Revel as a replacement for photoshop.com, but that has no impact on this disc menus issue.
    This all has to do with Adobe discontinuing photoshop.com and photoshop.com plus et al.
    If you need to download regular disc menus for Premiere Elements 10, please review the following
    ATR Premiere Elements Troubleshooting: PE 7, 8, 9,10: Content Download
    Bottom lines:
    1. No more Sign In for Premiere Elements 10
    2. No access to photoshop.com plus (members only) disc menus
    Any questions or need clarification on anything written, please do not hesitate to ask.
    Thank you.
    ATR

  • Airport Utility 6.0 where are Printers settings? Disks settings are very limited.

    After update to Airport Utility v.6.0 on my Airport Extreme I found that new versions has no Printers settings at all. I can see my printer on my Macs as well I can manage it from another Mac having older Airport Utility version, but not from a new one....
    Additionally, new Airport Utility version has very limited settings for managing disks connected to it.
    I even, at the beginning, was thinking that it put Airport Express firmware to my Extreme.
    Firmare update works fine. An update on Express was not smooth, as it lost conncectivity with my Extreme, but after reset it - I got it back (the upgrade changed network name that an Express is talking to an Extreme by removing brackets from its wifi name)

    My catch-all list of Airport 6.0 & Firmware 7.6.1 problems:
    ~~~~~~~~~~~~~~
    I've compiled a catch-all list of problems and changes with Airport Utility version 6.0 and FW 7.6.1. Some of the items may be relevant to this thread.
    THE PROBLEMS WITH AIRPORT UTILITY 6 AND FIRMWARE 7.6.1:
    Introduction: If you find AirPort Utility v6.0 too limiting or strange, you can ALSO install AirPort Utility v5.6, released alongside v6.0, to maintain all your previous capabilities. It works fine with both Airport g and n devices.
    PLEASE NOTE: According to Apple you must FIRST install Airport Utility v6.0 in order to access and install Firmware upgrade 7.6.1. Do that first. THEN install Airport Utility v5.6 and use it instead if you prefer.
    1) According to Apple's documentation, Airport Utility version 6.0 is ONLY for Mac OS X 10.7 Lion. It is NOT for 10.6 Snow Leopard. If you accidentally installed v6, you'll have to dig around in Apple - Support - Downloads for the previous relevant version for your devices and OS version. Here is the relevant page:
    http://support.apple.com/kb/DL1483
    2) The HELP for Airport Utility has been updated. When you first access it you may well be looking at the old Help. It is supposed to update itself spontaneously over the Internet. It took a couple minutes in my case. Be sure you are looking at the NEW Help before you start using it. One way to tell is that the list of help topics essentially doubles from what there used to be. Also, the very first topic in the NEW Help should read:
    "Set up an AirPort device > Set up a new AirPort Base Station or Time Capsule"
    3) The HELP has some WRONG information. Here we go:
    3a) There is NO "Enable Guest Network" setting. You CANNOT create a guest network or name it or give it any settings. Why this is still listed in Help, I have no idea. Why the setting is gone: This is most likely because the technology behind guest networks, WPS, has been thoroughly CRACKED in the wild. Google "WPS cracked" for lots of documentation of the situation. It won't be resolved soon.
    3b) I can't find any 'Setup Assistant". Everything is now manual. This is not to say that there isn't a setup assistant that appears when you FIRST set up your Airport device. I don't know.
    4) After installing Airport Utility v6.0, there is no indication of the accompanying firmware update until you decide to run the new version. Even then, you have to click on the big icon of your Airport device and notice an 'Update' button about halfway down the popup window. You then have to assume that this button is telling you to update your firmware.
    5) After you update your Airport device's firmware, you may well discover an ERROR subwindow popping up inside Airport Utility that says:
    "An error occurred while updating the firmware. -6721"
    Don't panic! All you need to do is go into your Wi-Fi settings, either in your menubar or the Network preferences, and turn OFF Wi-Fi, then turn ON Wi-Fi again. This is part of a long standing bug in Lion's Wi-Fi with which I bet you are already familiar, certainly up through Lion version 10.7.2.
    6) Miscellaneous changes in Airport Utility 6:
    6a) The keyboard command to manually change your Airport devices settings is GONE. You have to click the little 'Edit' button after clicking on the big icon for your device.
    6b) There is no longer any summary window for your Airport device. You have to instead click on the big "Internet" icon for related data, then click on the big icon for your Airport device for local settings data.
    6c) There is no longer any HELP advising users to EXPORT their settings. (The Help only talks about Import of settings). BE SURE TO EXPORT YOUR NEW SETTINGS! I did this immediately after both updates.
    6d) MAC address filtering for Airport devices is GONE.
    6e) All references to IPV6 anywhere are GONE. I have to assume the IPV6 settings are now entirely working and entirely automatic. Let's hope so.
    6f) Signal and Noise data and graphs are GONE. Use Apple's Wi-Fi Diagnostics app instead. Apple have hidden it here in Lion:
    /System/Library/CoreServices/W-Fi Diagnostics
    6g) In order to access the menu items in Airport Utility, you have to first click on the big icon for your Airport device.
    --> No doubt there are other changes, oddities or bugs related to these changes. But this is what I came up with during a cursory strafing of the software.

  • Very very slow file access iSCSI NSS on SLES11/XEN/OES11

    Hi,
    Like many Novell customers while carrying out a hardware refresh we are moving off traditional Netware 6.5 to OES11 and at the same time virtualising our environment.
    We have new Dell Poweredge 620 serves attached by 10gig iSCSI to Equalogic SAN
    Installed SLES will all patches and updates and XEN and then created OES11 SP2 virtual machines, these connect to NSS volume by iSCSI
    Migrated files from traditional netware server to new hardware and stated testing and ran into very very slow files access times
    A 3.5mb pdf file takes close to 10 minutes to open from local PC with Novell Client installed, same if no client and open via cifs. Opening same file off traditional NW6.5 server takes 3-4 seconds.
    We have had a case open with Novell for almost 2 months but they are unable to resolve.
    To test other options we installed VMWare ESXi on the internal usb flash drive and booted off that, created same OES11 VM and connected to NSS on SAN and same pdf open in seconds.
    The current stack of SLES11/XEN/OES11 is not able to be put into production
    Any ideas where the bottleneck might be? We think is in XEN.
    Thanks

    Originally Posted by idgandrewg
    Waiting for support to tell me what the implications are of this finding and best way to fix
    Hi,
    As also mentioned in the SUSE forums, there is the option of using the Equallogic Hit Kit. One of the tools, next to the great autoconfigure options it has, is the eqltune tool.
    Some of the stuff that I've found important:
    -gro is known read performance killer. Switch if off on the iSCSI interfaces.
    - if possible (meaning you have decent hardware), disable flowcontrol as this generally offers stability but at the cost of performance. If your hardware is decent, this form of traffic control should not be needed.
    -To have multipath work correctly over iSCSI and starting SLES 11 SP1. Make sure kernel routing and arp handling are set correctly (not directly relevant if you only have 1 10 GB link):
    net.ipv4.conf.[iSCSI interfaceX name].arp_ignore = 1
    net.ipv4.conf.[iSCSI interfaceX name].arp_announce = 2
    net.ipv4.conf.[iSCSI interfaceX name].rp_filter = 2
    Test if traffic is actively routed over both iSCSI interfaces:
    ping -I [iSCSI interfaceX name] [iSCSI Group IP EQL]
    -Make sure network buffers etc are adequately set as recommended by Dell (set in /etc/sysctl.conf):
    #NetEyes Increase network buffer sizes for iSCSI
    net.core.rmem_max = 16777216
    net.core.wmem_max = 16777216
    net.ipv4.tcp_rmem = 8192 87380 16777216
    net.ipv4.tcp_wmem = 4096 65536 16777216
    net.core.wmem_default = 262144
    net.core.rmem_default = 262144
    -Settings for the /etc/iscsi/iscsid.conf I'm using:
    node.startup = automatic # <--- review and set according to environment
    node.session.timeo.replacement_timeout = 60
    node.conn[0].timeo.login_timeout = 15
    node.conn[0].timeo.logout_timeout = 15
    node.conn[0].timeo.noop_out_interval = 5
    node.conn[0].timeo.noop_out_timeout = 5
    node.session.err_timeo.abort_timeout = 15
    node.session.err_timeo.lu_reset_timeout = 20 #Default is 30
    node.session.err_timeo.tgt_reset_timeout=20 #Default is 30
    node.session.initial_login_retry_max = 12 # Default is 4
    node.session.cmds_max = 1024 #< --- Default is 128
    node.session.queue_depth = 128 #< --- Default is 32
    node.session.iscsi.InitialR2T = No
    node.session.iscsi.ImmediateData = Yes
    node.session.iscsi.FirstBurstLength = 262144
    node.session.iscsi.MaxBurstLength = 16776192
    node.conn[0].iscsi.MaxRecvDataSegmentLength = 131072 #A lower value improves latency at the cost of higher IO throughput
    discovery.sendtargets.iscsi.MaxRecvDataSegmentLeng th = 32768
    node.session.iscsi.FastAbort = No # < --- default is Yes
    -Have Jumbo frames configured on the iSCSI interfaces & iSCSI switch.
    If you are using multipathd instead of the dm-switch provided with the Equallogic Hit kit, make sure the /etc/multipath.conf holds the optimal settings for the Equallogic arrays.
    Ever since Xen with SLES 11 SP1 we have been seeing strong performing virtual servers. We still use 1GB connections (two 1GB connections for each server, serving upto 180~190Mb/s).
    There could be a difference with the 10GB setup, where multipath is not really needed or used (depending on the scale of your setup). One important thing is that the iSCSI switches are doing their thing correctly. But seeing you've already found better results tuning network parameters on the Xen host, seems to indicate that's ok.
    Cheers,
    Willem

  • VPN and limiting internet access

    I posted this under the SMB as well but wanted to post under the VPN header at the same time.
    Hello all, I am very new to VPN's and Firewalls so please forgive me for lack of terminology usage.
    I am part of a company that has 20 internal PC's and 25 external sites (Convienient stores) that are all now being placed on a VPN. We purchased a ASA 5510 for the office and we are placing Linksys RV042 routers at the stores. What my question is, is that we have a few stores that need limited internet access because we have Subway restaurants there and they need to download and upload at times. What I dont want is to allow full access to the net because of the chance of outside attacks or viruses.
    My question is, what can be done to set the VPN in place but only allow certain access to web addresses that we say is alright to have communication with?
    Is this possible and / or what else needs to be purchased?
    I thank you in advance for any help you can advise on.
    JJ

    The problem with the internet is, how do you define this 'certain' addresses. Is this possible for you?
    There is an option in VPNs called split tunneling, which has a "Exclude specified" mode, that might help.
    Regards\
    Farrukh

  • I have been a loyal customer for years and have a hot spot because internet options are very limited in our rural area.  I have stayed with 10G since the beginning.  Most months I don't use the 10G.  Verizon has no problem with me paying for Data I don't

    I have been a loyal customer for years and have a hot spot because internet options are very limited in our rural area.  I have stayed with 10G since the beginning.  Most months I don't use the 10G.  Verizon has no problem with me paying for Data I don't use.  This month my daughter comes home from College and she accidentally uses 24G.....14 over get blind sided with $140.00 in overages.  I called Verizon today......stopped in to the store today......My neighbor told me they waved charges for her one time.  Lots of charges.....But I'm am getting no help.  Not even an offer of a payment plan to help me out.  I went back just 6 months and I have over paid for 19G.....Seems like they would like to help out their loyal customers!!!!     Does anybody have any suggestions on how to deal with them?   We are not wealthy....or I would just pay this and walk away......

    There is a big misconception in what customers believe a cell carrier is obligated to do.
    You pay a set price to use up to that amount of xx data. It makes no difference if you use it to the paid limit or way under. Its like peace of mind when you don't have to worry about a data counter.
    Your daughter used the data, your plan is quite clear of what overage charges are. Why should or would Verizon wireless just forgive the charges because you are a customer? Your daughter used the data, get the money from her. That is the responsible thing to do.
    There is no "I have been a loyal customer so please remove the $120, or $250, or $2,000.00 since I did not mean to use it"
    Your electric company, or gas company or any other company does not remove valid charges. Why should Verizon wireless?
    Just pay the invoice and don't think you are being mistreated because Verizon is a business and not a charity.
    Good Luck

  • I received a text today while at work about iCloud keychain verification code. I have not signed up for it or anything that uses it. I work out of the city with limited internet access so not sure why I would be getting this. Is my info safe??

    I received a text today while at work about iCloud keychain verification code. I have not signed up for it or anything that uses it. I work out of the city with limited internet access so not sure why I would be getting this. I only got this number about a month ago. Apparently someone else had the number before because I get texts from his family members wondering whats going on. I got one yesterday and the person didn't seem to thrilled that the number was cutoff and today I got 2 texts about iCloud Keychain which I don't even know what it is. Seems suspicious to me. If the person who use to own the number is doing it he should know it is not his number anymore because he obviously didn't pay his bills.  I'm not too sure about iCloud Keychain so just want to know my info safe?? It says it can store credit card numbers which is what gets me worried. Frankly I think it's pretty stupid to save that kind if information with any kind of app. But I don't want some random person trying to access my personal information because they are bitter they lost their number.  Please let me know as soon as possible so I can change passwords or anything that is needed.
    thanks

    If it were me, I would go to my carrier and get a new number. Since you have only had it for a month, the inconvenience would be minimal.
    Barry

Maybe you are looking for