VI Logger
Will VI Logger support FieldPoint in the near future.
This is a fairly frequently requested feature and NI is aware of the requests.
National Instruments policy prohibits the disclosure of new products or new features to an existing product prior to the release of the product.
Regards,
Aaron
Similar Messages
-
How to Plot number and string in one row (data logger counter) ?
hi all i made data log quantity using Digital Counter via modbus to monitoring quantity and reject that has and Name Operator, Machine and Part Number.
i have problem about plot the number & string in one row, as shown on the picture below :
how to move that string on one row ? i attach my vi.
Thanks~
Attachments:
MODBUS LIB Counter.vi 39 KBDuplicate and answered - http://forums.ni.com/t5/LabVIEW/How-to-Plot-number-and-string-in-one-row-data-logger-counter-via/m-p...
-
I purchased a Holux M-1200E Bluetooth GPS Data Logger. The device paired with my laptop just fine so I know it is working right. The device will not even show up on my iphone or ipad to pair via bluetooth. Is there a way to pair without jailbreaking??? I haven't had any trouble to date pairing any devic with my iphone or ipad, this is ridiculous!!!! Is there a way to update my bluetooth settings on my iphone 4s to be able to have this device be recognized??? I love my apple devices, but this is very frustrating. I bought this Data Logger for a specific purpuse to help out with my Search and Rescue volunteer activities, and I really need help with this!!! I am hoping apple will help me!!!
Thanks,
Melissamelissafromlenexa wrote:
That is not the right device, it is the
Holux
M-1200E Bluetooth GPS Logger
I looked at the same sight for that and it does not say that. This is the first time I have posted a question, you don't have to be mean about it. I am trying to get this to work for a good cause.
It may be the best source of assistance is the manufacturer of the device. I suspect you will need a specific app for the iPhone to get it to work, but the site is rather ambiguous about that. -
Hi I am trying to sync my ip3 but wont allow me to transfer music purchased on the phone to itunes on the laptop. States I have 5 authorised computers on my account but when i logg into my itunes account it only identifies 1 so i carn't deactive all to start again? I am trying to backup data fom myip3 to put on ip4 so carnt even complete sync atm Any ideas on what to do??
To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iDevice, then sign back in with the ID you wish to use.
If your sister doesn't know the password for her old ID, and if her old ID is an earlier version of her current ID, she needs to temporarily recreate the old ID so you can delete if from your phone using her current password. To do this, have her go to https://appleid.apple.com, click Manage my Apple ID and sign in with her current iCloud ID. Click edit next to the primary email account, change it back to her old email address and save the change. Then edit the name of the account to change it back to her old email address. You can now use the password for her current ID to turn off Find My iDevice on your device, even though it prompts you for the password for her old account ID. After you do this, Next, have your sister recreate her current ID again by going back to https://appleid.apple.com and changing her primary email address and iCloud ID name back to the way it was.
Then your can save any photo stream photos that you wish to keep to the camera roll on your device, then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted. You will be prompted to either keep or delete the iCloud data from your device. If the data is already in another account you can choose Delete. If you need to migrate it to another account, choose Keep, then choose Merge when signing into the new account. -
I need help with my iPod touch and I deleted my iTunes account and trying to make a new one but won't let me it keeps telling me cannot connect to iTunes or server not found and I cannot connect to my computer because It freezes and turns off and I'm try a see if I logg on iTunes on here will it let me download iTunes on here instead of the other one could someone help out please!!???
<Email Edited by Host>You really should not post your email address on a public forum such as this unless you just love spam. I have requested that Host edit for you protection.
Allan -
How to implement logger in this ftp server
I have written a FTP Server that is used by the clients to upload xml over to the server.
Currently it is using a console and it is printing stuff out on a console.
I have tried a lot to implement a logger class so that all console messages get written to a file.
But it has not been working out at all.
I would deeply appreciate if all you java gurus out there could modify the code given below to correctly log messages to a log file.
Please do Explain if possible ...I will try to rectify this issue in several other applications i developed as well.
import java.net.*;
import java.io.*;
import java.util.*;
import java.util.Date;
import java.text.SimpleDateFormat;
import java.text.DateFormat;
import java.text.Format;
import java.lang.Object;
import java.lang.*;
import javax.crypto.*;
import javax.crypto.spec.PBEKeySpec;
import javax.crypto.spec.PBEParameterSpec;
import java.security.spec.AlgorithmParameterSpec;
import java.security.spec.KeySpec;
public class FTPServer
{ public static void main(String args[]) throws Exception
{ ServerSocket soc=new ServerSocket(5217);
System.out.println("FTP Server Started on Port Number 5217");
while(true)
System.out.println("Waiting for Connection ...");
transferfile t=new transferfile(soc.accept());
class transferfile extends Thread
Socket ClientSoc;
DataInputStream din;
DataOutputStream dout;
transferfile(Socket soc)
{ try
{ ClientSoc=soc;
din=new DataInputStream(ClientSoc.getInputStream());
dout=new DataOutputStream(ClientSoc.getOutputStream());
System.out.println("FTP Client Connected ...");
System.out.println("External IP of Client ..." + ClientSoc.getInetAddress());
//System.out.println("FTP Client Connected ..." + ClientSoc.getRemoteSocketAddress());
start();
catch(Exception ex)
//encrypto routine starts
class DesEncrypter {
Cipher ecipher;
Cipher dcipher;
// 8-byte Salt
byte[] salt = {
(byte)0xA9, (byte)0x9B, (byte)0xC8, (byte)0x32,
(byte)0x56, (byte)0x35, (byte)0xE3, (byte)0x03 };
// Iteration count
int iterationCount = 19;
DesEncrypter(String passPhrase) {
try {
// Create the key
KeySpec keySpec = new PBEKeySpec(passPhrase.toCharArray(), salt, iterationCount);
SecretKey key = SecretKeyFactory.getInstance(
"PBEWithMD5AndDES").generateSecret(keySpec);
ecipher = Cipher.getInstance(key.getAlgorithm());
dcipher = Cipher.getInstance(key.getAlgorithm());
// Prepare the parameter to the ciphers
AlgorithmParameterSpec paramSpec = new PBEParameterSpec(salt, iterationCount);
// Create the ciphers
ecipher.init(Cipher.ENCRYPT_MODE, key, paramSpec);
dcipher.init(Cipher.DECRYPT_MODE, key, paramSpec);
} catch (java.security.InvalidAlgorithmParameterException e) {
} catch (java.security.spec.InvalidKeySpecException e) {
} catch (javax.crypto.NoSuchPaddingException e) {
} catch (java.security.NoSuchAlgorithmException e) {
} catch (java.security.InvalidKeyException e) {
// Buffer used to transport the bytes from one stream to another
byte[] buf = new byte[1024];
public void encrypt(InputStream in, OutputStream out) {
try {
// Bytes written to out will be encrypted
out = new CipherOutputStream(out, ecipher);
// Read in the cleartext bytes and write to out to encrypt
int numRead = 0;
while ((numRead = in.read(buf)) >= 0) {
out.write(buf, 0, numRead);
out.close();
} catch (java.io.IOException e) {
public void decrypt(InputStream in, OutputStream out) {
try {
// Bytes read from in will be decrypted
in = new CipherInputStream(in, dcipher);
// Read in the decrypted bytes and write the cleartext to out
int numRead = 0;
while ((numRead = in.read(buf)) >= 0) {
out.write(buf, 0, numRead);
//added later on
in.close();
out.close();
} catch (java.io.IOException e) {
} //encryptor routine ends
//not implemented right now as we arent using the ftp server to download stuff...can be activated later on if we want
void SendFile() throws Exception
String filename=din.readUTF();
File f=new File(filename);
if(!f.exists())
dout.writeUTF("File Not Found");
return;
else
{ dout.writeUTF("READY");
FileInputStream fin=new FileInputStream(f);
int ch;
do
ch=fin.read();
dout.writeUTF(String.valueOf(ch));
while(ch!=-1);
fin.close();
dout.writeUTF("File Received Successfully");
String Compare(String filename) throws Exception
///dout.writeUTF("entering compare");
String dateTempString=new String();
Date dateValue=new Date();
SimpleDateFormat formatter = new SimpleDateFormat ("hhmmss");
dateTempString = formatter.format(dateValue);
File dir1 = new File("C:\\FTPnew");
boolean success2 = dir1.mkdir();
if (!success2) {
// Directory creation failed /Already Exists
File dir = new File("C:\\FTPnew\\server");
boolean success = dir.mkdir();
if (!success) {
// Directory creation failed /Already Exists
File ftemp=new File(dir,dateTempString + filename);
File fnewtemp=new File(dir,"new-enc-"+filename);
// Create encrypter/decrypter class
DesEncrypter encrypter = new DesEncrypter("My Pass Phrase!");
FileOutputStream fout=new FileOutputStream(fnewtemp);
int ch;
String temp;
do
{ temp=din.readUTF();
ch=Integer.parseInt(temp);
if(ch!=-1)
fout.write(ch);
}while(ch!=-1);
fout.close();
//dout.writeUTF("written temp en file");
// Decrypt
encrypter.decrypt(new FileInputStream(fnewtemp),
new FileOutputStream(ftemp));
//String Option;
dout.writeUTF("Delete");
System.out.println("File Upload Successfull--Duplicate file with timestamp Created");
boolean success1 = fnewtemp.delete();
return "hello" ;
void ReceiveFile() throws Exception
String ip=din.readUTF();
System.out.println("\tRequest Coming from Internal IP Address : "+ ip);
String filename=din.readUTF();
if(filename.compareTo("File not found")==0)
return;
// Destination directory
File dir11 = new File("C:\\FTPnew");
boolean success22 = dir11.mkdir();
if (!success22) {
// Directory creation failed /Already Exists
File dir = new File("C:\\FTPnew\\server");
boolean success21 = dir.mkdir();
if (!success21) {
// Directory creation failed /Already Exists
File f=new File(dir ,"enc-"+filename);
File fe=new File(dir,filename);
String option;
if(fe.exists())
//dout.writeUTF("File Already Exists");
String compvalue = Compare(filename);
//dout.writeUTF(compvalue);
if(compvalue.compareTo("hello")==0)
//dout.writeUTF("Transfer Completed");
return;
option=din.readUTF();
else
//dout.writeUTF("SendFile");
option="Y";
if(option.compareTo("Y")==0)
// Generate a temporary key.
// Create encrypter/decrypter class
DesEncrypter encrypter = new DesEncrypter("My Pass Phrase!");
FileOutputStream fout=new FileOutputStream(f);
int ch;
String temp;
do
{ temp=din.readUTF();
ch=Integer.parseInt(temp);
if(ch!=-1)
fout.write(ch);
}while(ch!=-1);
fout.close();
// Decrypt
encrypter.decrypt(new FileInputStream(f),
new FileOutputStream(fe));
boolean success2 = f.delete();
dout.writeUTF("Delete");
System.out.println("File Upload Successfull");
else
return;
public void run()
while(true)
try
String Command=din.readUTF();
if(Command.compareTo("SEND")==0)
System.out.println("\tSEND Command Received ...");
ReceiveFile();
continue;
catch(Exception ex)
//System.out.println("\tClient Terminated Abnormally ...........");
continue;
}Stick a
Logger log = Logger.getLogger( "me ftp server" );at the top.
Checn Sys.out.println to log.info( ... )
Add a logging prefs file.
http://java.sun.com/j2se/1.4.2/docs/guide/util/logging/overview.html -
Error when running VI logger 2.01 with MX driver
Hi,
When I run a VI task , the following message from Task Validation shows up:
Database does not exist in the specified path.
I have reinstalled the software, but it want fix the problem.
How do I solve this problem?
Do I need the full vers. of VI logger, to run and log data?
Do I need the Citadel database installed ? Where do I finde the Citadel database? What CD? I have the full NI Academic software.
Please help me!!!
I'm LOST.
S.
Tævje
[email protected]Look here for solving problem.
RegardsMessage Edited by Indiana on 04-21-2005 08:33 AM
Message Edited by Indiana on 04-21-2005 08:34 AM
Message Edited by Indiana on 04-21-2005 08:34 AM
Message Edited by Indiana on 04-21-2005 08:36 AM -
"file not found" error in VI Logger when running an imported VI Logger task
I'm having trouble getting all of my imported tasks to run in VI Logger.
I'm using VI Logger 2.0, with an SCXI-1100. The data acquisition tasks I import run fine. One of the VI Logger tasks I've imported runs OK, but the other one gives an error:
"Engine Error!
Error Code = 7
LabView: File not found. The file may have been moved or deleted, or the file path might be incorrectly formatted for the OS."
If I create a new VI Logger task, the new task works OK. And my 1st VI Logger task to be imported works OK. So I know my setup mostly works. But our company has never been able to figure out importing tasks very well, so I'm looking for help.
Question 1: What file is LabView looking for? I've checked my Export path and database path, and they are identical in both the working task and the non-working task.
Question 2: Where else might I look for the difference between the 2 VI Logger tasks? Neither task uses any weird characters in the name, both have analog input channels and calculated channels. And I've mixed and matched the data acquisition tasks with no change (the good VI Logger task will run with either data task, the bad VI Logger task won't run with either data task), so I'm pretty sure the problem is in the VI Logger task, and not the data task. I've also tried importing the 2nd task on its own, as a separate import function, but that gave the same error.
Thanks for the help in advance,
JakeHi Spex,
I can import the VI Logger task OK (from another PC running VI Logger 2.0), but I can't run the task. I've attached the file. The "1 channel" task runs OK. The "x-probe" task starts, takes 1 or 2 data points, then hangs for a few seconds, then pops up the "file not found" error. The data acquisition taks run OK, so I don't think they're the problem.
This file I've attached includes 2 good data tasks ("1 channel" and xprobe"), 1 good VI Logger task ("1 channel"), and my non-working VI Logger task ("x-probe", which works fine on the PC it was exported from).
I have also tried exporting the non-working VI Logger task on its own, and it still imports OK, but still doesn't run, and gives the same error.
Thanks,
Jake
Attachments:
configData1.zip 353 KB -
Cannot print reports as PDF: Logger not set error
Hi all,
I'm trying to print some reports as PDF and I have the following problem:
- I followed the step "5.Installing and Configuring Apache FOP" of http://www.oracle.com/technology/products/database/application_express/html/configure_printing.html
- When I try to print my report I get this message on OC4J console:
08/04/30 11:54:42 [ERROR] Logger not set
08/04/30 11:54:42 [INFO] Using oracle.xml.parser.v2.SAXParser as SAX2 Par
08/04/30 11:54:42 [INFO] building formatting object tree
08/04/30 11:54:42 [INFO] setting up fonts
08/04/30 11:54:42 [INFO] [1]
08/04/30 11:54:42 [WARNING] table-layout=auto is not supported, using fix
08/04/30 11:54:42 [WARNING] Sum of fixed column widths 720000 greater tha
um specified IPD 658800
08/04/30 11:54:42 [INFO] Parsing of document complete, stopping renderer
My question is about the Logger error. What is exactly a Logger?
May I define it in j2ee-logging.xml file of OC4J?
I'm working with:
- APEX 3.0.1
- Java SDK 1.4.2
- Oracle Containers for J2EE (10.1.3.2)
Thanks!
RogerHi again,
I still didn't found the solution to my problem. In the "ascontrol.log" file of OC4J there is this warning:
2008-05-05 11:36:28,934 [OC4J Launcher] WARN jmx.SecureWalletManager _setPermission.161 - WARNING: Could not set file permissions administrators:F for wallet at E:\oc4j\j2ee\home\persistence\ascontrol\ascontrol\securestore\ewallet.p12
Is it significant?
Thanks -
How do I use the High Speed Data Logger with multiple I/O devices?
I am using the High Speed Data Logger vi to read from a 16 channel A/D card (NI PCI-MIO-16E). The project may require more than 16 channels. How can I use High Speed Data Logger to read from two A/D cards? Will it be able to write the data to one file?
The High Speed Data Logger vi will not acquire and right to multiple DAQ boards at the same time without modification. LabVIEW is more than capable of doing this what you are trying to do, but you will have to modify the code.
Regards,
Anuj D. -
How to use Logger object in Lookout 5.0
I am now trying to log data using Logger object. I use Switch1 for activating LogContinuously mode and Switch2 for breaking logging process. If I turn off Switch1, the logging process stops, its ok. My problem is if Switch1 is still on and I turn off Switch2, the logging process is still running. I seems different from what I have read from Help file. Anyone has the solution for it?Please give me an advice! Thanks a lot. Its better if someone post an example about using Logger object here for reference.
Regards,I think the behaviour you described is correct. If you turn on switch2, the logging process will stop, even when switch1 is on. If you turn off switch2, the process will be running.
Here is an example of logger object.
http://zone.ni.com/devzone/cda/epd/p/id/3816
you can change the "log break" button into a switch, which can better show you how it works.
Ryan Shi
National Instruments -
How can I automatically control the channel selection on the data logger
I am an in-experienced use with a simple system which measures and displays temperature from 16 thermocouples. Not all 16 thermocouples are always connected at once and those that aren't are blanked off from view. I would also like to use the Advanced Data Logger VI to log the measurements but would like to have the logger only record or display the thermocouples that are connected. Un-connected channels give a signal of 1264 degrees so I can use a comparator to give a boolean output to switch them off. Can anyone please tell me how to do this.
Also, I need to expand the VI to read all 16 channels instead of the current 8. Any help would be appreciatedMike,
Unfortunately I couldn't get the reference of the example you mention, probably you may want to add it as an attachment so the person who decides to answer this question knows exactly which example you are describing. So for the part of making visible/invisible some of the channels I attached an example that I built for demonstrating this feature, simply open the VI and run it, if you want one of the channels or plots from the graph to be invisible just click in the push button that corresponds to it. Switch to the block diagram and review the use of property nodes, using the property of visible.
If you want to generate a support request please visit www.ni.com/ask to see the options of reaching us.
Good luck!
Nestor Sanchez
Applications Engine
er
National Instruments
Nestor
National Instruments
Attachments:
Visible_Plots.vi 46 KB -
Log Messages from Transaction Event Logger
I have 4 instances of MII v12.1 and within a transaction I want to add a message to the log when the transaction runs so I can view it through the message logger. All 4 MII instances were installed by the same consultant a few years ago so there "should" be no differences in the log configs. On 3 of the instances this is working fine - I have created a very simple transaction with one Event Logger action configured with a message "Test Message" and when I execute the transaction I see the correct entry in the log viewer. On the fourth however, although the transaction executes without error I am not seeing anything in the viewer for this event. I am using the standard "last 24 hours" log viewer with no filters and no specific log locations selected, and no customisations. I am seeing other system generated messages. I found some documentation about logging and the viewer and I found the Netweaver log config but as far as I can see it looks consistent between the instance which is working and the one which is not working. Is there some other config which needs to be done to enable Event Logging from transactions? My user has the same access across all instances. Any guidance would be appreciated. I attach a screen shot of what I am expecting to see (taken from one of the instances which is working).
Hi Partha
Many thanks for your reply. I have tried this and unfortunately it makes no difference. I also checked on the other instances and found they have their tracing levels all set to error, not Info. I have also noticed that on the instance which is working, in the System Configuration section at the bottom of the Log Config page - for Applications and all sub categories I see the entry .\log\applications_00.log in the Pattern column. On the instance which is not working I see that entry for the Applications root but not for any of the sub categories (even after selecting Copy to subtree). I cannot see where I can set this value (there is no modify function available, even under Administrator login).
Also, when I look at the log messages which have generated when setting the Event Type to Error on the instance which is not working, it shows one entry and the Category and Location columns show <com.sap.xmii.bls.executables.action.logging.LoggingActions>. When I generate an event with type Error on the instance which is working I get 2 log messages, one with the Category and Location <com.sap.xmii.bls.executables.action.logging.LoggingActions> and the other with Category /Applications/XMII/Xacute/Event and Location <com.sap.xmii.bls.executables.action.logging.LoggingActions>.
I guess that the .\log\applications_00.log should be showing for all subtree items under Applications and because it is not then the messages are not going into any application log. Not sure how to fix this however.
I have also reset to the default configuration and it does not change the above.
Best Rgds
Richard -
Need better info on error when sending a SOAP message - logger ALL
Hi all!
I am calling a UCM content server CheckIn WS from JDeveloper 11g 1.1.1.1.0 (jspx). I've used the WS Data Control and a WSDL for this, and have most of it down besided the CustomMetaData part.
I need to pass in a value for one of the custom metadata fields and when i try to override the parameters of the operation to include it, i get this error - i doubt that this is all the info i get.
I've tried setting the logger.xml levels to ALL (C:\oracle\Middleware\jdeveloper\modules\oracle.odl_11.1.1\server_config\logging.xml) - nothing changed.
Sep 25, 2009 6:45:58 AM org.apache.myfaces.trinidadinternal.config.upload.UploadRequestWrapper setCharacterEncoding
WARNING: Unable to set request character encoding to windows-1252, because request parameters have already been read.
Sep 25, 2009 6:45:58 AM org.apache.myfaces.trinidadinternal.config.upload.UploadRequestWrapper setCharacterEncoding
WARNING: Unable to set request character encoding to windows-1252, because request parameters have already been read.
Sep 25, 2009 6:45:58 AM oracle.adf.controller.faces.lifecycle.FacesPageLifecycle addMessage
WARNING: ADF: Adding the following JSF error message: Encountered an internal error creating the SOAP request for the operation.
oracle.adf.model.adapter.AdapterException: DCA-40008: Encountered an internal error creating the SOAP request for the operation.
at oracle.adfinternal.model.adapter.webservice.provider.soap.SOAPProvider.setParameters(SOAPProvider.java:656)
at oracle.adfinternal.model.adapter.webservice.provider.soap.SOAPProvider.execute(SOAPProvider.java:302)
at oracle.adfinternal.model.adapter.webservice.WSDataControl.invokeOperation(WSDataControl.java:251)
at oracle.adf.model.bean.DCBeanDataControl.invokeMethod(DCBeanDataControl.java:427)
at oracle.adf.model.binding.DCInvokeMethod.callMethod(DCInvokeMethod.java:256)
at oracle.jbo.uicli.binding.JUCtrlActionBinding.doIt(JUCtrlActionBinding.java:1437)
at oracle.adf.model.binding.DCDataControl.invokeOperation(DCDataControl.java:2120)
at oracle.adf.model.bean.DCBeanDataControl.invokeOperation(DCBeanDataControl.java:464)
at oracle.adf.model.adapter.AdapterDCService.invokeOperation(AdapterDCService.java:307)
at oracle.jbo.uicli.binding.JUCtrlActionBinding.invoke(JUCtrlActionBinding.java:693)
at oracle.adf.controller.v2.lifecycle.PageLifecycleImpl.executeEvent(PageLifecycleImpl.java:394)
at oracle.adfinternal.view.faces.model.binding.FacesCtrlActionBinding._execute(FacesCtrlActionBinding.java:217)
at oracle.adfinternal.view.faces.model.binding.FacesCtrlActionBinding.execute(FacesCtrlActionBinding.java:201)
at view.backing.CheckIn.cb1_action(CheckIn.java:209)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sun.el.parser.AstValue.invoke(AstValue.java:157)
at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:283)
at org.apache.myfaces.trinidad.component.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:46)
at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:102)
at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:190)
at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:475)
at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:756)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._invokeApplication(LifecycleImpl.java:673)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:273)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:165)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:191)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:85)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:54)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.wls.JpsWlsFilter$1.run(JpsWlsFilter.java:96)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.security.jps.wls.util.JpsWlsUtil.runJaasMode(JpsWlsUtil.java:146)
at oracle.security.jps.wls.JpsWlsFilter.doFilter(JpsWlsFilter.java:140)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:70)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:202)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3588)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2200)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2106)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1428)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Here is my bean code:
HashMap primaryFile = new HashMap();
primaryFile.put("fileContent", bFile);
primaryFile.put("fileName", uploadedFile.getFilename());
operationBinding.getParamsMap().put("primaryFile", primaryFile);
HashMap customMetadataPropertyRoom = new HashMap();
customMetadataPropertyRoom.put("name", "xRoom");
customMetadataPropertyRoom.put("value", "SOME ROOM!");
HashMap customDocMetadata = new HashMap();
customDocMetadata.put("property", customMetadataPropertyRoom);
operationBinding.getParamsMap().put("CustomDocMetaData", customDocMetadata);
The one with the fileContent and fileName works good since it's only one level deep, but it seems that i can't do the same logic with the 2 levels deep.
*<CustomMetaData>*
*<property>*
<name>
<value>
</property>
</CustomMetaData>
Please help - i've did not get a minut of sleep and it's already 7 AM :((( It's not the first time i a having all nighters while doing JDeveloper...so little resources on line...
I hope someone can help me out quickly since i am on a short deadline.
Btw, i used the wizard and the wizard did not generate any stubs like the axis does, so i assume it's all integrated...Hi all!
Just to post the solution to this if anyone ever runs accross this thread...
For some reason i had it bad the first time, don't have time right now to see why but here is what worked for me:
HashMap primaryFile = new HashMap();
primaryFile.put("fileContent", bFile);
primaryFile.put("fileName", uploadedFile.getFilename());
operationBinding.getParamsMap().put("primaryFile", primaryFile);
HashMap customDocMetadata = new HashMap();
HashMap [] properties = new HashMap[1];
HashMap customMetadataPropertyRoom = new HashMap();
customMetadataPropertyRoom.put("name", "xRoom");
customMetadataPropertyRoom.put("value", "SOME ROOM");
properties[0] = customMetadataPropertyRoom;
customDocMetadata.put("property", properties);
operationBinding.getParamsMap().put("CustomDocMetaData", customDocMetadata);
Basically an unbounded wsdl type is an array of objects (HashMaps), makes sense, i thought i had it like this before, must have messed up somewhere...
Good luck all! -
I believe that I have a key logger installed on my mac
Hello, I am pretty sure there is some sort of keylogger installed on my Mac. Going through a divorce right now and I know for a fact that the other party is able to access my computer somehow. I think it is a key logger because they know way too much information and have told me that they have been able to watch me writing emails. I found the Linc Davis email with instructions on how to check the shell commands. Can anyone please look at this and tell me if they see anything out of the ordinary? Thanks in advance.
Password:
com.microsoft.office.licensing.helper
com.macromates.auth_server
com.adobe.fpsaud
Keiths-MacBook-Air:~ keithnemeth$ launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
com.microsoft.autoupdate.fba.10064
Keiths-MacBook-Air:~ keithnemeth$
Keiths-MacBook-Air:~ keithnemeth$ ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta} * L*/Fonts 2> /dev/null
/Library/Components:
/Library/Extensions:
ATTOCelerityFC8.kext
ATTOExpressSASHBA2.kext
ATTOExpressSASRAID2.kext
ArcMSR.kext
CalDigitHDProDrv.kext
HighPointIOP.kext
HighPointRR.kext
PromiseSTEX.kext
SoftRAID.kext
/Library/Frameworks:
AEProfiling.framework
AERegistration.framework
AudioMixEngine.framework
EWSMac.framework
NyxAudioAnalysis.framework
PluginManager.framework
iTunesLibrary.framework
/Library/Input Methods:
/Library/Internet Plug-Ins:
Default Browser.plugin
Flash Player.plugin
GarminGpsControl.plugin
Quartz Composer.webplugin
QuickTime Plugin.plugin
SharePointBrowserPlugin.plugin
SharePointWebKitPlugin.webplugin
flashplayer.xpt
nsIQTScriptablePlugin.xpt
/Library/Keyboard Layouts:
/Library/LaunchAgents:
/Library/LaunchDaemons:
com.adobe.fpsaud.plist
com.macromates.auth_server.plist
com.microsoft.office.licensing.helper.plist
/Library/PreferencePanes:
Flash Player.prefPane
/Library/PrivilegedHelperTools:
com.macromates.auth_server
com.microsoft.office.licensing.helper
/Library/QuickLook:
iBooksAuthor.qlgenerator
iWork.qlgenerator
/Library/QuickTime:
AppleIntermediateCodec.component
AppleMPEG2Codec.component
/Library/ScriptingAdditions:
/Library/Spotlight:
Microsoft Office.mdimporter
iBooksAuthor.mdimporter
iWork.mdimporter
/Library/StartupItems:
/etc/mach_init.d:
/etc/mach_init_per_login_session.d:
/etc/mach_init_per_user.d:
Library/Address Book Plug-Ins:
Library/Fonts:
Library/Frameworks:
EWSMac.framework
Library/Input Methods:
.localized
Library/Internet Plug-Ins:
Library/Keyboard Layouts:
Library/LaunchAgents:
Library/PreferencePanes:
Library/Services:
.localized
Keiths-MacBook-Air:~ keithnemeth$ osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
iTunesHelper, Genieo
Keiths-MacBook-Air:~ keithnemeth$Knemeth16 wrote:
Ok, but that doesn't help my situation with the key logger.
I don't think we fully understand your objective with regard to it. Are you trying to verify it's presence or just get rid of it?
If the former you should know that only one anti-malware vendor targets such things and it isn't very good at what it tries to do. Since almost all keyloggers and other spyware serves legitimate purposes and is commercial or hack software, it normally won't be detected. Installation requires physical access to your computer or local network, so other types of malware are not the issue here.
Do you recognize the source of all the files listed above? There are several names that I don't recognize.
If you simply want it gone, then shldr2thewheel has the best ideal. Even though re-installing the OS should preserve all your user files, make sure you have a complete, viable backup before you do the restore. There will probably be fragments of any keylogger that was installed, but in all probability it will have been disabled. -
How to find out the IBU of the logges in user with some relationship?
Hi,
How to find out the IBU of the logges in user with some relationship?
Regards,
JayaHi Jaya,
I am not sure if i understood you correctly. Do you want to find the corresponding account of logged in User? If yes, then you can use the below FM:-
CALL FUNCTION 'BP_CENTRALPERSON_GET'
EXPORTING
IV_USERNAME = im_usr_name
IMPORTING
EV_BU_PARTNER_GUID = lv_partner_guid
EXCEPTIONS
NO_CENTRAL_PERSON = 1
NO_BUSINESS_PARTNER = 2
NO_ID = 3
OTHERS = 4.
Thanks and Regars,
Rohit
Maybe you are looking for
-
Opening FLA file in CS5.5 compared to CS6 - possible glitches in CS6?
I've tried opening one of my FLA files from a client with CS6 and the components on the scene are mis-aligned,invisible and unselectable whereas if I open it in CS5.5, then it opens fine and everything is displays perfectly. Why would this be?
-
I'm freaking out that my music (the unchecked songs in ITunes) that I loaded from CDs is going to be gone.
-
How to access the user-id property which is available in VM engine in the rulebase
Hi Experts, The interview engine exposes various application constants and one of them is the user-id which gives the user-id of the current interview session. This is basically taken from the url for the web-determinations. We would want to use this
-
Need help understanding Folders.
I am extremely new at using iMac OS X Leopard Desktop. I work with a lot of photos and when importing with my camera I have difficultly adding them in one place where I can find them when using Disk Utility for burning to CD. I would like to import m
-
Finishing from a digital source
a friend of mine shot some footage using a still camera in photo-jpg. i'm on a pokey powerpc, so i transcoded the footage given to me to dv so i could work in real time(color correction, etc). i've got the cut, so now i have to finish this thing with