Vibrating Issue Buzzing Like a Bee

Hi guys,
I dont understand this phone anymore..now i have a zooming/buzzing sound like a bee when i type..what is this? And if someone calls it makes a noise like a rattle snake because of the vibrating...really weird...U guys also have this? Can someone test this please and reply if u have the same or not?
On XDA developers people claiming its an hardware issue, while others say its from the new update .257.
Especially in the left corner of the phone if u put your ears to it and type something.
Do i need to replace again? Really boring it....

I am experiencing this same problem, but I have the older firmware (14.1.G.1.534)
I found that if I leave it alone for awhile (ex. after sleep), the next time it vibrates, the sound would not be there.
Also from the built-in diagnostic, no squeak/buzz sound was observed with constant vibration.
It tends to happen when I press things that leads to frequent vibration (ex. pressing the home button many times)
Only had the Z1 for a little more than 2 weeks, not looking forward to return it, any suggestions from Sony?

Similar Messages

  • Can not take a screenshot with Maverick and track pad.  can not use apple chat to talk with a tech.  there are other issues also like I used to be able to go back a page with the delete button.  No Maverick PDF to instruct on how to use Maverick

    Can not take a screenshot with Maverick and track pad.  can not use apple chat to talk with a tech.  there are other issues also like I used to be able to go back a page with the delete button.  No Maverick PDF to instruct on how to use Maverick
    THE use of the apple support is a mess also.
    I want to be able to use my MAC fully and easily like I used to with Snow Leopard. 
    What is wrong with this maverick OS?

    The only people who can possibly assist you with this is Apple Customer Relations, call your local Apple contact number and ask for Customer Relations then explain your situation clearly and politely (be firm but don't rant).
    You might want to investiage what the local laws are regarding defective goods and 'fit for use' definitions on warranties etc. Consumer Protection can be a useful tool to use or bargain with if needed ...

  • Noise like a bee, no noise when light dimmed down, who kann help 2 find out why?

    noise like a bee, no noise when light dimmed down, who kann help 2 find out why?

    0   com.apple.CoreFoundation                0x95185ea6 CFNumberGetValue + 38
    1   com.zedonet.pde.PRDX                    0x03f38ea6 MyGetTicket + 102
    2   com.zedonet.pde.PRDX                    0x03f33a3c MyInitialize + 188
    This is what's causing the crash, and it sounds related to PrintFab.
    From googling, it looks like removing /library/printers/ppd plugins/printfabpde.plugin will get rid of the crash, but I don't know if that will  make the driver unusable.
    Hope this help.

  • Lumia 720 Jumping and Vibration issue.

    Hi, my Lumia 720, bought 10 days back is automatically vibrating and jumping between windows, to bing and home screen, and stopping at app switcher screen or home screen, and touch stops working(display and 3 keys).  It works only after I press power on/off. Initially its occurance was less frequent but now its more often.   Did reset, contacted nokia care and they reinstalled the OS.  Yet, its happening.  Please advise on this.

    My Lumia 720 which I bought recently suffers from a strange behaviour. It starts vibrating suddenly, wildly and on its own without any provocation and after jumping several screens in quick succession, stops at Bing. This activity lasts anywhere from 10 seconds to half a minute. During this time, everything that I have been doing, attending a call, writing email or whatever, stops and after this forced interruption,  I am forced to go to Bing. I have tried various steps like setting Display+touch settings to normal ( from high) and stopped Bing from operating on its own, but the problem continues. Is it a hardware or oftware issue? I have also seen that there are several users experiencing this problem and reporting this issue for quite sometime. In any case, Nokia should be aware of this and issuing the approrpiate patch to correct this situation. I wonder, Is anybody at Nokia listening?

  • Q10 vibrate issues

    lost vibration capability, came back sporadically, now very faint - have rebooted, etc. with no relief.  Any suggestions?

    Hey Jfreeb,
    Welcome to the BlackBerry Support Community Forums.
    Thanks for the question.
    What version of BlackBerry 10 are you currently running?  Go to Settings>About to find this information. Also when was the last time the vibration was working per normal, did you install any new applications lately?
    I look forward to your reply.
    Cheers.
    -ViciousFerret
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Like! for those who have helped you.
    Click  Accept as Solution for posts that have solved your issue(s)!

  • Jelly Bean Update - Vibration Issues

    Since upgrading to Jelly Bean the other day, certain apps, like my Gmail and Facebook app, will vibrate when I receive a notification when the phone is in vibrate mode. I have both of these app notification settings to sound only, so when the phone is on vibrate, nothing should happen. It's very frustrating because I leave my phone on vibrate when I am at work for phone calls only, but now I have to keep it on silent so that it's not constantly going off. Is this a reported bug or something that will be fixed soon?

        Hello nmsorr,
    We would be happy to assist with your device issues today. Upon review this issue is not considered a known issue. However, we always have options to see what we can do to update your device. Have you completed a hard reset on the device after update? Have you ran the device in safe mode to see if notifications come in correctly? Please keep us posted, thanks!
    MatthewS_VZW
    Follow us on Twitter @VZWSUPPORT

  • Sony Xperia m4 Aqua vibration issue

    I bought the M4 Aqua yesterday at the store and already I have a problem I can't figure out. This phone should have a vibration system right? When it turns on it should vibrate but it doesn't. I've enabled vibration mode for incoming calls, but it doesn't work when someone calls. Also with Whatsapp it doesn't work. When I want to put the phone on vibration mode with the volume down button to the point where there's the ''shaking phone'' icon, it doesn't vibrate and confirm it's actually in vibration mode. What should I do? Also, when I took the device off the power source when it said it was fully loaded (after I bought it, for the very first time and the device was off) it said it was 90%?And is 9 hours (with beginning at 90%) of normal use and sometimes 3G a good amount of time? It made it from 9:00 till 18:00, so not till the end of day.And, can you make panorama's without having to turn the device on its side, cause that's a bit annoying. Sorry if all these questions are easily solved, I'ver never had Android before.Thanks in advance for answering.

    Hi Ni_8,
    Welcome to the community,
    In this case I would suggest taking the device back to the place of purchase, as this sounds like a hardware issue.
    However you can try a software repair on the device before taking the device back, as this could be software.
    Here's how to run the repair on PC Companion:
    1. Install and open PC Companion then select Support Zone.
    2. Phone Software Update.
    3. Start.
    4. Repair Phone
    5. Continue
    6. Accept data removal
    7. Next
    8. Wait for prepare
    9. Select Phone
    10. Follow the connection steps
    And Bridge for Mac:
    1. Launch Bridge for MAC without the handset connected.
    2. On the Main Window select "Xperia > Repair Xperia Device".
    3. Ensure the phone is charged and select "Ok" in the following window.
    4. Select Continue on the following page.
    5. Wait until the initialising step is finished the continue as below.
    6 . Select your model of phone from the list that appears
    7. Follow the connection steps that appear, ensuring that you are holding the relevant button down before during and after the connection phase until the update/repair begins.
    Let us know how you get on.

  • Not sure if these issues/feature requests have bee...

    Hi,
    Really like my Lumia 800 on the whole, however:
    1 It would be nice if the player remembered the last position of a podcast. If that’s not possible could it be made possible to scroll to a position in a podcast rather keeping fingers on next or previous track keys
    2. The call/voice command option on the inline remote is unavailable once you have started using the music player. I had to reboot the phone to be able to use it to voice dial.
    3. When on vibrate and using the music player with earphones the player didn’t pause on an incoming call. It would be nice if on vibrate you still had some audible alert (only when earphones are connected and played through earphones etc..) when you have an incoming call.
    4. Brings me nicely to notification volume when earphones attached. Way too loud.
    Yes I have updated to the latest firmware.
    Thanks

    This isn't the correct site for these types of request. Nokia do not create or control the OS of the phone, Microsoft do
    Try http://windowsphone.uservoice.com/forums/101801-feature-suggestions for feature suggestions.
    That is the official site for this kind of thing.
    1. It would be yes, but this is the way Microsoft have designed it, this can be requested at the link above.
    2. The remotes still works, hold the button down for a couple of seconds and it will go into voice activation mode.
    3. This is a bit of a strange request, you want vibrate only and an audio alert at the same time? Why not just leave the ringer on, note that you can add custom ringtones so you can make it make whatever sound you like.
    4. This is a known bug with the latest update, hopefully Nokia is working on it and will fix it in a future update.

  • Lumia 620 vibration issue and camera video recordi...

    Hello, I recently purchased a Lumia 620 and facing some issues with it. The vibration is not at all working. I have updated to Lumia black. And how to focus in video camera. It ain't focusing during recording. Please help me..

    sslumia620 wrote:
    how to focus in video camera. It ain't focusing during recording.
    Does this help?
    sslumia620 wrote:
    The vibration is not at all working.
    Did you try the Nokia Software Recovery Tool already?

  • 5800: vibration issue

    Hi everyone, sorry for my very bad english (I'm italian...eheheh).
    I have an 5800 with 31.0.101 FW (it's the last update for my product code) and it has a strange problem related to the vibration of arriving sms or calls, not the touchscreen vibration.
    I noticed that after some hours that it's turned on, the vibration stops working, and this happens in silent mode (obviously with vibration activated) and in all other modes with a ring activated. To resolve this problem i have to restart the phone, turning it off and then on. But after some hours this happens again.
    I tried to do Hard Reset and reinstalling the firmware, but after 1-2 days same problem.
    The secretary of customer support in my town told me it's an hardware problem and the phone have to be sent to Nokia Italy for at least 2-3 weeks for repairing, but I think it's a software or firmware issues, otherwise the vibration will not work for nothing.
    What I have to do? Waiting for new fw update for my phone, hoping that this will resolve this problem, or sending to Nokia? I need help!!!! :-(

    Since you already tried a hard reset, try it without a memory card. It maybe that system files on the card are corrupt. However if nothing helps, you really have to send it.
    If you find my post helpful please click the green star on the left under the avatar. Thanks.

  • T61P DVD multi recorder VIBRATION issues

    Does anyone else have an issue with their multi-recorder vibrating considerably when playing/accessing a DVD???? Most of the time the recorder does not cause an issue. It seems that when it plays DVD's it is working harder to read the data. Perhaps spinning faster which causes it to vibrate to the point where you can't even hear what's being played via speakers.
    I have pushed/held  the front of the drive which minimises the noise but I believe it shouldn't be this noisy. Perhaps I should contact Lenovo for a replacement.... Is there an adjustment I can do myself to fix this???
    Thanks in advance for your assistance
    Message Edited by jasondarla on 03-17-2009 06:44 PM
    T61P(6459-CTO) T9300 @ 2.5 GHz, 4g ram, Quadro FX 570M, Vista Bus. 64Bit, 160gig 7200 rpm HD, WSXGA disp.

    Yes, I believe there is but if I understand it correctly, it simply slows the drive down (!)  Does the vibration happen with only some DVDs or all of them?  Some of my DVDs/CDRWs that are not balanced casue this but most of them don't.
    Keith
    Formerly 600E 2645, T30 2366, X31 2673, T40 2373, T41 2379, T42 2373, T42 2379, T60 1952, T61p 8889, T61p 8891
    Currently T420 4177-CTO, T430 2347-A54, T430 2349-L64, T430 2347-UN9, T430 2342-CTR, Ideapad K1, H520S 2561-1LU

  • Vibrate and buzzing noise

    Is there any way to adjust the vibrate on the Droid1.  I just received my 3rd replacement and the vibrate function is so high that the phone buzzes loudly.  I use vibrate often in meetings and I cannot quietly change my phone to vibrate or even use the function.  It is also loud when the phone powers down.  I know that my other three phones were not this loud.   Went to the verizon store and they told me there is no way to adjust it but they've been wrong before!  I had two replacements during the OTA upgrade so I don't know what the upgrade did - just know it changed a lot of things.

    It is usually a loose slider...
    2 of my phones have been really loud and they have a loose slider.
    The other 3 have a "tight" buzz.

  • Vibration Issues

    I have an 4GB model I bought back in July 2007.
    Recently whevener I put my phone in vibration mode, sometimes it won't take and alternate between vibrate and no vibrate even with the switch in vibrate mode. It sometimes happens when I turn the vibrate function off through the switch, that it will go back and forth between vibrate/sound.
    Can this be repaired or am I just out of luck?
    Thanks!

    I have posted an answer to this many times before... perhaps you have not done a proper search.... anywayz,
    hold the phone with one hand, and firmly tap the side of the phone with your other hand. now try the vibrate mode. mine did this one time as did other owners' iPhones. seems that the vibrate motor got hung up, and the tap to the side frees it..
    however, some have had issues with their silence switches. I noticed mine was stuck when turning on the vibrate mode in the settings. have not had a problem since!

  • Iphone 5 vibration issue

    i have iphone 5 with ios 7.0.4 and my vibration suddenly stopped working . i don't know why . is there any solution to it ? its ios 7 problem or its hardware problem ???

    Also happens with my fathers iPhone 4S, I assume it's an IOS issue in that case.

  • HT1688 my iphone 4 blacked and now it's vibrating and buzzing.  Help!

    Help!

    Hello there, Leezjay23.
    The following Knowledge Base article has some great information to help troubleshoot your issue:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Particularly:
    Display has no backlight or dark screen
    Toggle the ringer switch to see if the unit vibrates. If it does, it could be that iPhone is getting power, but is not displaying any image.
    Try turning iPhone off and then on again.
    While connected to the iPhone charger, try to reset the iPhone.
    If the low-battery screen appears, charge the iPhone.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

Maybe you are looking for

  • Calling a procedure from within a trigger

    Hi, I have a table (table1) which when a row is inserted into this table I need to populate a number of tables based upon gathering information from multiple tables using three fields passed in from table 1. I therefore proposed to create a before in

  • IDOC-XI-File Scenario -Response?

    I know how to configure R/3 to send IDOC to XI, and then XI-File configuration. I read how-to doc on acknowledgment, it assumes the receiving party is also on R/3 where they configured AUDIT to send response from receiving party. But this case is rec

  • Authorization check flow

    Hello Folks, I wonder if some one can help clearing a doubt of mine. The standard definition one finds on the net for Authorization check maintenance in SU24 for transactions is: CM = Check performed AND object added in PFCG when tcode added to the r

  • Web Services Manager - register services

    Hi all, I have an OC4J Standalone(10.1.3), Web Services Manager(4.0.3) and OracleAS Service Registry(10.1.3). I have a Web Service deployed in OC4J. Then I register de WS in OWSM in a Gateway, but I cannot see the wsdl. The error is: System does not

  • Since the update yesterday my fire ftp no longer works properly its the same on 3 different computers

    After firefox updated yesterday when I open a site the folders are there when I open a folder to edit them they are ok as soon as I return and go out of a folder I get link icons and cant open or edit anything. When I log out and shut down firefox an