Video audio output very low on Skype using windows...

hi,
I have just bough a lenovo laptop with windows 8.1 and when I contact anybody on video they cannot hear me, it is really low. I can hear them perfectly. I have checked the settings as advised ib the skype faq and all seems to be okay.
Can anyone offer any possible solution as its driving me mad Music and youtube etc plays fine
Thanks
[Removed for privacy]

If you have Conexant sound card, then try to disable all enhancements. Open Windows Sound Control Panel -> Recording devices -> Properties -> Advanced.
http://community.skype.com/t5/Windows-archive/internal-mic-not-working/m-p/1106600#M83651

Similar Messages

Audio outputting very low

I'm outputting to flv's and there is sound but very low. I converted three files the same exact way and only one came out the way it should have. The only difference I see is I used the real camera audio on the one that sounds like it should and wav files for the other two that came out low. The wav files are clean and at the same level as the original.
The thing that baffles me is that I exported all 3 to QT reference files and they all sound great.
I have converted to another format and still low. I have also created a new QT reference and still the same problem.
Anyone know why and how to fix this...why does it look and sound great in my QT reference but not outputting that way?

I'm just going to make a wild guess here.
Sometimes, if you have two audio tracks that are out of phase,
when you combine them, the result is very quiet or disappears.
If, for example, if the left and right channels are out of phase,
you will hear them OK in stereo, but if they are both panned center,
and there is a phase problem, you could be losing a lot of level.
If you just use one track and mute the other, is the problem still there?
Does the problem only happen when you're using both tracks?
That would be a phase problem.
In that case, you could try just use one track and pan it center.

Audio very low when i use blutooth Handset in my L...

Hi,
I have the Handset BH-106 which was working fine with my old Nokia Phones, after i got the Lumia 920 i Found that the Audio became very low after start the Call, it will start good but dropping down with the time, it was very old so i decided to buy i new one and i have selected the BH-217.
i have tested it in the store the Audio was perfect, after few days the same issue accure and now im sure its the Phone issue not the Handset.
i did soo many soft/Hard Resets, i also got the Portico update, and i got other nokia Update (like Audio and others) but nothing worked.
is it really the Phone Issue because i dont want to buy newer handset like BH-220 with no benifits !
what is the soulution and what is the best Audio Hanset (for phone calls only i dont listen to music), which is have a car base like the BH-217 and can go to stand-by Mode.
Regards,

It seems like this is a common problem with the BH-217 and it's auto adjust volume. You should be able to adjust volume on the phone.
Others have the same problem.
http://discussions.nokia.com/t5/Accessories-Car-Phones-and-Other/Bluetooth-BH-217-volume-problem/m-p...
Any bluetooth headset should work for you.

AC3 audio is VERY low compared to apples menu presets

AC3 audio is VERY low compared to apples menu presets,
The original aiff files are at a good level, concert footage professionally recorded, nothing peaking, nothing too low.
THe AC3 is at minus 10DB on the vu meter, the aiff peaks at 100.
The apple menu music, which are .mov files, peek at plus 1-2.
My old version of compressor did not do this.
I do not have enough room on my disk for all AIFF but I do want to use the Apple Menus and provided music.
Any thoughts?

You can increase the Ac 3 "reference level" to 0 dB (it should be -27 dB)
Reference level? There is no such thing - I believe you are referring to Dialog Normalization, and it is extremely unwise to set this to zero... it is most certainly not a good way of increasing the overall volume of the file. -27 happens to be the application's default value, but it in no way means it should be set to -27. There are a few factors you need to consider when using AC3 encoding...
The DNV setting is the amount of attenuation that the file will get, according to a formula:
attenuation = 31 + DNV setting
Therefore if you set the DNV to be 0 you will alter all AC3 streams by 31 Db, which is enough to make it unplayable without serious distortion:
0 = 31 + (-31)
If you want to get the exact same audio levels out of A.Pack (or Compressor 2, if you are using that) then your DNV setting should be set to -31. This means there is absolutely NO attenuation to the file, meaning you get the same levels out as went in...
What I recommend here is to edit the audio in an application such as Peak and get it sounding exactly as you want it. When you encode to AC3 set the DNV to -31 and set the compression to 'none' (not film standard or anything else, there's nothing worse than badly applied compression). These settings then give you a basic output which is nearer to what you start off with. The other setting much talked about is RF Overmodulation protection. This is useful to turn on if you think the player will be sending the output signal to an RF input on a TV rather than through scart or something else. It certainly used to be the case that such signals were boosted by 11db, causing overmodulation. The setting is a way of preventing that hapening, but as more and more folk have stopped using RF as an input it makes sense to turn it off. If in doubt, turn it on, but listen to the output file and see if it is acceptible.
As for the basic bitrate, for a stereo file, lower it to no less than 192kbps.
Now, if you want to run a few tests, then keep all the settings above and encode the same 10 second piece of audio. Change the DNV to -31, then -20, then -8 and then 0 and play the resulting files back and listen to what happens each time.
Head over to http://www.macprovideo.com and download some of the tutorials there for A.Pack. They have been created by Martin Sitter (who has helped and guided me more than once) and will give you a far better understanding of AC3 encoding than anything else I can think of. You will pay for them, but it is a wise investment if you are at all unsure of how to get the best audio onto your discs. Let's face it, audio accounts for at least 2/3rds of the experience when watching TV - it is as well to get it right.

Video files show very low resolution poster image

Using Indesign CC and the latest tools and content viewer I am creating Autoplay video animations for the cover of our weekly magazine.
With each issue I have published the same problem occurs where the poster image for the video file is very low resolution and makes our content look very amateur (for a brief moment) before playing the video file at full resolution.
I have tried creating animations using flash, photoshop and Edge Animate, exporting MP4, MOV and OAM files. The problem is present with all movie files and with the Edge animation files a white flash appears before the file plays.
Is there a solution for either of these issues? We are looking to continue to use animations for our covers and need them to look 100% crisp and clean.

Sorry to jump in but I'm having the same issue too!
I have an H.264 mp4 which I created in After Effects and inserted using the Media panel within DPS.
As you see below, it plays on page load and I have chosen the finished front cover to be the poster image when it ends from within the Folio Overlays panel. I have set the video to stop on the last page.
When the video stops you can see all the artifacting around the text which I would expect to be as crisp as the original PSD file I uploaded as the poster image.
Is there anything I'm doing wrong or is there anything that can improve the quality of the final still?

Why does audio stop when pavilion 23xi sleeps (using Windows 8)

why does audio stop when pavilion 23xi sleeps (using Windows 8)?

Hello again @st3lla,
I can understand the fear of messing up a computer when I first started seriously working on computers back in the early 90's I had to format and re-install my operating system twice a day for quite a while before I figured out a very important step (at least important for me), and that was after I made a change to my computer to restart it. This way if I messed something up I only had to undo one thing and not 50 because I went wild on it. lol
Anyways, do not be afraid of your computer all you need to do is learn that step, how to keep your personal items backed up and then of course how to re-install your computer back to factory and you can always start over with a fresh build.
On to your questions:
Q - What are the steps to ensure that all HP updates are done.
A - Simply review the HP Support document: Using HP Support Assistant (Windows 8) and it will guide you through the process.
Q - What are the steps to ensure that all Windows updates are done?
A - Simply review the Microsoft Support document: Windows Update: Frequently Asked Questions and again you will find answers to this question. (***Note: Do not worry if the document refers to Windows 8.1 it is only an upgraded version of Windows 8 and the steps are the same)
I am also including a Windows Support document: Install the latest Windows 8.1 Update, which will guide you through how to install the Windows 8.1 update on your computer.
And finally, to put your mind at ease I am providing you with two important HP Support documents: Backing Up Your Files (Windows 8), and Performing an HP System Recovery (Windows 8), which will provide you with all the instructions you need to backup your personal files so you do not loose them if you ever do mess up the computer, as well as provide you with instructions on how to put your computer back to how it came from the factory.
Please re-post if you require additional support. Thank you once again for your post on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

On my iPhone 4s the video play back , the audio is very low . All other audio is good on phone even older video plays nice and loud . I have no idea what is wrong?

On my iPhone 4s taking video then playing back ,the audio is so low you can barely hear it . I played older videos and the audio works perfect . All other audio works perfect on the phone too. I have no idea what is going on ?

Hey!
I have tried holding down the home and power button countless of times. It doesnt respond at all. Plug my phone to a charger and hold down the power button and my phone switched on. But it said Activation Required and said connect to Itunes. As e screen remains on the connect to Itunes screen, I disconnect the charger from my phone and my phone went dead instantly. My battery is full btw. Tried connecting to Itunes through my Macbook Pro but iTunes doesnt detect my device and the apple logo flashes for about a few seconds on my phone and then disappear and then came back on again. My Iphone has been connected to my laptop for about 30 mins and the apple logo has been coming on and off for 30 minutes now and Itunes has not detect my device yet.
SIGHHH.

Laptop Audio volume very low

Hi Experts,
I bought my Inspiron laptop in January and was hoping for good sound quality based on the advertised Waves MaxxAudio. However I find the laptop volume is very low and end up holding the speakers close to my ears when doing a skype call.
Is this an issue I need to take up with warranty support or are the speaker volumes expected to be this low?

Hello. Some of the models do have adequate volume and some have low volume, but it is a subjective thing and I don't know if anyone can say that your volume is normal or not without hearing it. Even then they would need to compare it with others of the same model. If you post your model name then maybe someone with that model will express an opinion.
If the volume is low only in Skype but okay when playing an audio file from the hard drive, then probably a Skype setting. Right click on the volume icon on the taskbar and click on "Open volume mixer" to see individual volume sliders for each device.
Also you could test by switching from the vendor's audio driver (varies by model but probably Realtek) to the Windows native audio driver. If the volume seems too low (when playing audio files) with both drivers then there could be a hardware problem.
1. Open the Device Manager (type devmgmt.msc in the Windows search box).
2. Expand the "Sound, video & game controllers" and right click on "Realtek High Definition Audio".
3. Select to "Update Driver Software".
4. Click on "Browse my computer for driver software".
5. Click "Let me pick from a list of drivers on my computer".
6. Put a check in the box "Show compatible hardware" if not already checked.
7. In the list of devices, click "High Definition Audio" (the native driver).
8. Click "Next".
9. On the Update Driver Warning box, click "Yes" (install the driver).
10. Restart the laptop if prompted. If not prompted, then no need to restart.
[To get back to the Realtek driver, do it again but reverse the names in steps 1 and 6.]
Note that the above instructions are for models with a Realtek audio driver. If yours uses IDT or Conexant, look for those names in the Device Manager.

QT 7 Pro - Volume of audio is very low when I record from a microphone.

Possibly someone can help me here, I am trying to record audio using a microphone and QuickTime Pro. I want to put this audio on my Nano.
I cannot get the audio volume up to the level of existing imported audio programs when I record a audio program using QTP and a mic.
I have already tried to set the microphone volume to a higher level. In the Quicktime Program I set the Menu/Edit/Preferences/Quicktime Preferences
I then go to the Audio tab, select audio recording and playback devices, select "audio playback and recording devices" and set the volume slider on the microphone to high, go to the advanced tab, set the microphone to boost, still I get a very low volume.
When I record using the Windows Sound Recorder I get a high volume, but the output is a wave file and the quality is not as good as I really want. But clearly the microphone and driver work. I have tried updating the driver, still get low volume for my recorded audio.
HP DV1000 Pavilion Laptop Windows XP Conexant AMC Audio Driver

So you use an RCA cable going into what before it hits the MBP?
EDIT: Also in System Preferences > Sound > Input > you can select the input & adjust the volume accordingly as long as it's plugged in.

Audio output seems lower than other sites

I created a couple videos and maxed my presenter's audio within the clip. When played back, it forces the user to raise the volume of their speakers relative to the other sources they've listened to on YouTube, Pandora, etc. Is there a way to benchmark the relative audio output other than through trial and error?

beykeysr
What version of Premiere Elements are you using and on what computer operating system is it running?
When you are in the editing workspace, do you open the Audio Meters to double check the volume of the sound?
ATR

On G71-340US: very low volume when using DVD player, but OK when using Windows Media Player.

Just purchased new laptop G71-340US. Volume (at full tilt) is decent when using Windows Media Player, but when using DVD player, volume is so low I can't really hear volume on a movie unless room is completely quiet, and I am right in front of laptop. Any suggestions, or is it really this bad?

I don't have the answer, but I certainly agree. The G71-340us is severly under powered in the audio department. You would think with the extra room in the 17in. chasis they could have put a sound system with a lot more power. Other than that it's a great machine.

Very low resolution previews using loupe in import dialog

Hi,
I had connected Canon 6D via usb to import photos to Lr. However in import dialog using loupe view I get very low resolution previews even if I zoom all way up. It doesn't make any changes in preview resolution, it's like 200x300 pixels at most. I shoot both raw and jpeg and it is the same. Tried full card format. Doesn't help. I can zoom normaly in camera screen. Is it related to the fact that I connected camera directly via usb instead of using card reader? I use latest Lr (5.6) and latest camera firmware (1.1.4).

A raw file usually has two previews embedded in it, a tiny thumbnail preview and a larger zoomable preview. It sounds like LR is only able to retrieve the tiny thumbnail preview even though you are able to zoom in on previews in the camera. Unless the camera, itself, is actually decoding the raw file to produce the zoomable preview and none is in the raw file for LR to see.
You can use the following website to investigate what previews are available in a raw file: http://regex.info/exif.cgi You want to click the Browse button next to Local Image File and navigate to a raw file and click Ok, then click the View Image From File button, then wait for the raw file to be uploaded, after which information about the raw file will be shown including the sizes of the previews and raw image.
As to your question about whether using a card reader might help, try it and see. There could be a system driver getting in the way when the camera, itself, is plugged in.

After immersion audio is very low

After testing immersion in water, my SmartWatch2 was working correctly. A few hours later, the screen went black and never started again. I detected some moisture in the corners of the screen. Also, tested this for my Xperia Z1. Phone is working, but sound is very low even when I set it to max level. Some forums state that after 2 hours it should be working normally again, but It's been 3 days now and still the same issue.

Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
About your SmartWatch 2, its only water resistant. Not proof. So if it has been submerged it may take damage by the water.
Regarding your Xperia Z1. It sounds like some moisture might still be trapped inside somehow. Try blowing into the speaker holes and check if you notice any difference.
- Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

I can hear the video when played on iPhone5 but when emailed the audio is very low

I'm unable to hear the videos when they are emailed from an iphone5. I can play it on the phone but the volume is extremely low when sent to email. Any answers on how I can hear the video played louder when I open it from email on pc?

To help troubleshoot we'll need the following system information:
Operating   system
Browser
Flash   Player version
When reporting issues with video or audio, it's also helpful to get your system hardware and driver details. Instructions for finding this information can be found here:
Windows
Mac
Finally, sometimes video and audio problems are caused at a lower level and not directly related to Flash Player. I recommend trying both of the links below to see how they perform. If the problem exists with both, then Flash Player is most likely not the culprit as the HTML5 video link does not use Flash Player when playing. You can verify the use of HTML5 by right clicking the HTML5 video and looking for the words "About HTML5" at the bottom of the context menu.
HTML5   video
Non-HTML5 video
Thanks,
Chris

Audio is very low and irregular sound is always coming whenever i play any video

irregular sound is always is coming in playing video

Hi akashtiwari7,
Welcome to the HP Forums!
I would like to take a moment and thank you for using the forum, it is a great place to find answers.
For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that you are having an issue with the audio but you did not provide any details . Without knowing the exact model of your computer and the operating system you are running, I have no starting place.
How Do I Find My Model Number or Product Number?
Have you done all your Windows updates? You can run the The HP Support Assistant to aid with updates and difficulties.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Video audio output very low on Skype using windows...

Similar Messages

Maybe you are looking for