Video Problems: IRQ and Driver Related??

First I apologize for misspellings, poor details and info, and lack or exactness for models names. I am tired and in a hurry. So if you can please respond as soon as possible. Thanks
I recently purchased the ms-6590 kt400 Ultra Fisr (serial ata raid, giga lan , blah blah) and a new athlon 2600 fsb 333 my fsb 178 x 2 = ? Not here for math. I placed this in a already working system. No formatting hdd nothing just switched and fired it up.
Things seem to run fine but I noticed lower test results on 3dmark2001 getting a mere 9000 with my msi geforce 4200ti 4x agp.
Then recently in games I find to have low fps at times sort of on and off.
Hence I believed I have problem with the video card. Turns out my video card has a lot of problems. First off my video card is sharing an IRQ with my onboard sound I wish to change this but under windows xp I don't know how (its new to me) I need the onboard and the video so disabling is not a option unless the is nothing else I can do. It also shares memory and i/o I beleive with my pci bus and pci to pci bridge or something.
Again I apologize for details I can get back to you if needed.
2nd the card under benchmarking tools such as Sandra say the card is not fully agp compatible or not using the agp. Also stated is agp rate not optimal.
3rd I found that I can not use the msi tabs to select my agp rates or side banding addressing. I can not overclock my card as well using the auto adjust I get an direct draw error the sec I hit the button and it underclocks the card and stops.
my drivers are the msi drivers yet they were updated and now I got the option for 8x but of course my card is not 8x.
also directx is version 9.no clue and is not signed I beleive.
As you can see I got a truck load of video problemsother then that everything is running fine. If you have any suggestions, fixes, drivers, or need more info please respond. Again sorry for the fast report I am going to bed. Thanks. Wait gotta put a face in this will do ;(

Hi
The JBAT1 jumper.
Switch off, remove power lead from PSU, find JBAT1, move the jumper from pins 1 & 2 to 2 & 3, leave for 5 secs, then put jumper bac k on pins 1 & 2, plug in power lead and restart. The post screen will want to reset Bios, either F1, or Del, I think. Load 'bios setup defaults.' Reset boot sequence, floppy, CD, HDD, other devices enabled(for time being). Make sure floppy is set for seek.
Save and exit
Bios v1.3B2, is I see available on MSI japan site!!
The radeon drivers, are here http://www.omegacorner.com/ati_2kxp.htm , if they are available they will be there.
You did disable the 'boot sector virus protection' before flashing Bios.
If you still have a prob with the SATA, let me know and I will give you the setup for them.
Cheers
Jocko

Similar Messages

CS6 video problems- green and magenta posterization

I've spent some time looking into this issue, but am having a hard time finding a solution. I use my Nikon D5100 for a 365 video project and started having this issue when I upgraded to Adobe CS6 from CS5.5. The files out of camera look fine viewed in quicktime or WMP, and they look fine when I edit them in CS5.5. When I started editing in CS6, I noticed there is a green/magenta posterization that occurs, and it appears CS6 Bridge, Premiere, and After Effects on the unedited files straight out of the camera (H.264). Camera settings haven't changed but the difference is clear.
Anyone have any suggestions on how to fix this problem in CS6??
Here is a screen grab from After Effects showing the difference of how it looks between CS5.5 and CS6.
http://www.flickr.com/photos/anthonytownson/8542258110/

I think that the issue is with the MainConcept decoders shipped with CS6, which have some known issues with the H.264 material shot by Nikon cameras.
If you submit a bug report and mention in the bug report that you're willing to submit an example file, we can look into it:
http://adobe.ly/ReportBug

Newbie with an Urgent problem- BlueJ and Compiler related

Hi, ok so I've downloaded the latest version of BlueJ (2.1.2) and have all of the Java components (i.e. BlueJ actually starts). However when I try to compile a program all it says is "Compiling..." in the corner. Nothing happens and when I click inside the window the message disappears with nothing being changed. Am I missing something glaringly obvious? This is my first encounter with BlueJ and the whole Java-thing. Also, time is a factor so a quick response would be INCREDIBLY appreciated. Thanks in advance.

Hi, ok so I've downloaded the latest version of BlueJ
(2.1.2) and have all of the Java components (i.e.
BlueJ actually starts). However when I try to compile
a program all it says is "Compiling..." in the
corner. Nothing happens and when I click inside the
window the message disappears with nothing being
changed. Am I missing something glaringly obvious?
This is my first encounter with BlueJ and the whole
Java-thing. Also, time is a factor so a quick
response would be INCREDIBLY appreciated. Thanks in
advance.Hi,
Well I dont Know much about the BlueJ IDE but I definately advise you to use the JCreator IDE that is perfect for a beginner and has easy to use interface. You can download the Lite Version (which is absolutely free) from:
http://www.jcreator.com
I had tried BlueJ but didn't like it.
Good Wishes,
Amanullah

Video Or Graphic Card Driver Problem After Clean And Re-Install Windows 7 32-bit

Video Or Graphic Card Driver Problem After Clean And Re-Install Windows 7 32-bit I m Tired I m Finding & Finding Drivers
But I Wont be Able To Play Games & Other Apps Please Solve This And Give Me Link For Video Card Driver Or
Graphic Card Driver For Windows 7 32-bit (x86)
THANKS
PROFESSOR TOM........................................

Hi:
See if this W7 32 bit graphics driver works...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100029-2&cc=us&dlc=en&lc=en...

Driver-related video playback problems.

Hi,
I've been experiencing less than stellar video playback for a while. My system is P4 1.6A 256MB RAM with msi FX 5700 128 MB running on WIN98 SE . The thing is that before upgrading my drivers to 50.XX series , I never had video playback problems, totally smooth, then after the 50.XX series, certain video clips froze for a second when opened, then when I installed the 5306 drivers, my system used to freeze for a second before video playback and video seeking stuttered and froze a lot. Since upgrading to 56.55 and then 56.64 version , the freezeups and stutters are gone but now the quality of the video playback is really crappy and also there is this horizontal border around the video and it looks kinda 'squinched?!?' . This erratic video behaviour has been going on through out my upgrade from a FX5200 to FX5700 card and with both MSI and nvidia drivers. Presently I'm using nvidia non-branded drivers 56.64. Also, why do these newer drivers keep dummy-proofing there options pages, you cannot even experiment enough with the settings anymore and I'm afraid Riva tuner or powerstrip might not work with the newer releases.
I haven't experienced any problems with video games, just video playback, either windowed or full-screen. I would really appreciate any help with this problem, its getting to be like an itch at the back you just can't scratch.
Thank you

What power supply u are using?
please list out the spec fully.

I am having trouble keeping the quality of my video when exporting to my external drive. I change the kind to "original" but when I view the video from the external drive once exported, the sound and picture are distorted.

I am having trouble keeping the quality of my video when exporting to my external hard drive. I have tried to export from iphoto with changing kind to "original" but when I open the video from the external drive the quality is effected. I have also tried copying the video to my desktop and then dragging and dropping onto the drive...same problem. Any suggestions? I would like to save everything to my external drive so that I can delete all of iphoto library and then reimport to correct a few things.

The file sizes are identical. In the finder I did a search for all .mov files. Then when they came up, I went through them and named each one so that they would be easier to find. I am a new mac user and am used to windows. I realized later that I should not have done this....with a mac files should be named within iphoto app...not finder....When I went to open the videos in iphoto, it wouldn't allow me. I had to go into finder, copy to desktop and reimport into iphoto. Then the videos worked again. However, I had the problem with the poor video quality when copied to external drive before that. Actually the first problem I had was when I copied to ext drive...videos were copying as an image...so I learned that you have to change "kind" to original before exporting....then that problem was solved...now they are videos, not images but not of a great quality. Skips, sound and images are not in sync...etc...

T400 - Video problems and a long wait for repair...

Hi,
I'd just like to state my experience with Lenovo Customer Support for a video problem with my T400. Bottom line, as of today, it's been around 27 business days that it's been with Lenovo, and 41 days total since it's failed on me, and nobody, including Lenovo Customer Support, seems to know what its status is exactly, except that they're waiting on a part which has no ETA.
In July 2009, I bought a T400, a 2764CTO version with the switchable graphics between the internal intel graphics and the ATI GPU.
All was well until February 1st, 2010, when the LCD sudden wouldn't work. Well, it would work, but the screen was very very dim, even with the display maxed out on brightness. You would have literally bring your nose to the screen in order to even make out any text or images - definitely unusable. However, if you hooked up an external monitor via the video output, the T400 would display video output properly that way. When I did this, I noticed that the switchable graphics option wasn't there any more - couldn't switch to the ATI GPU. Based on this, I figured it must be a video card or LCD issue, or a combination of both.
So, I called Lenovo Customer Support (CS) at 1-800-565-3344, since I'm up here in Canada, and I initially was issued a case number of 41JRFSD, and I agreed to send it to a local Lenovo Repair Centre. Oops, my bad, I made a mistake using the locator tool I was told to use at bplocator.lenovo.com, and thought the Centre was relatively close. Not quite. So, I called Lenovo CS again, and they issued me with a new case number, 40KWSYF, and said they'd send a box for return to depot. And within 2 days, Feb 2nd or 3rd, I got a Purolator courier return box. That's fast service! Pleased, I put my T400 in according to instructions, and I sent it off.
Fast forward to about mid-February. I called Lenovo CS, and apparently there was a delay - the depot needed a part that wasn't in stock. Fine, I know these things can happen - I'll wait.
Fast forward to March 1st. I talk to a Lenovo CS rep, and it appears that the part needed has arrived, and they've put a rush order to get the computer back to me. Great!
Fast forward to March 8th, still no computer. I talk to another Lenovo CS rep... strange, there's no update. The issue gets escalated to the Depot managers.
Fast forward to March 12th. Still no word on my T400's status. An email fron CS has been sent to the depot. Not even the CS reps know what's going on. The rep I talk to figures there should be a response by the end of the day.
Fast forward to today, March 13th, 4:50pm Pacific Time. I just finish talking to Lenovo CS, there's been no response from the depot. Apparently there's a part that they're waiting on for repairs, but there's no ETA on it. Is it the same part that I've waiting on all this time? Is it a new one? I don't know.
At this point, I've been told to send an email explaining my situation, and I've also been told to talk to Scott the next time I call CS on Monday after 3pm Eastern. I have to stress that the Lenovo Customer Support Reps I've talked to have all been very sympathetic and have been courteous, helpful, and professional - something I appreciate from having worked in Customer Support myself. But the bottom line remains: my computer's not back to me.
So, my questions to the community here: is my experience here typical? Is there any hope of my seeing my computer back, or even at least just the hard drive? I've used Lenovo computers for work for the past 7 years, and it was my good work experiences that led me to buying a Lenovo for home use. However, it's been a while since I've been without my T400, and I was hoping to get my taxes done on the computer too, since they're due at the end of March. I'll reserve judgement on Lenovo until I get my computer back, but at this point, all I can say is... I'm disappointed.
If you're reading this, I'll let you judge my experience for youself. I'll update my case as it progresses.
Thanks!
Moderator edit: Removed support contact private information, per the Community Rules.

Hi all,
So, an update with some good news: my computer is finally back!
After a total of over 40 business days (just over 2 months) I finally have my T400 back at home, working again!
According to the spec sheets, the repair depot had to replace: the systemboard/planar, display/LCD panel, LCD cable, PC card, bluetooth, and the inverter. BIOS/Embedded controller was also updated, along with the regular diagnostics to ensure everything was working properly.
I give Lenovo credit though: they got the final parts to repair the computer on Monday, April 5th, and shipped my computer back to me for the next day (today, April 6th). That's fast service, once repaired!
However, my case spans over 4 screens of updates and repair depot orders of parts.
Also, it took me over 10 calls to Lenovo's Customer Service, plus an escalation to a higher-level manager after 1 month had passed, to get progress updates and ETAs for repair.
Lenovo called me only once to give me an update, and that was the manager whom my issue was escalated to: all the other times, I called Lenovo for an update.
The story doesn't end here, however:
In talking to Customer Support, they told me that Sales might be able to sell me an extended warranty at a discount, given the issues I had. And indeed, after talking to Sales, they offered me a 1 year warranty extension at a price of just over $100 CDN, plus tax. This is a sale price, compared to the regular retail of $129. Unfortunately, they can't sell me just one month.
At this point, I refused their offer, and again escalated to a manager to request an extension of exactly 1 month on my existing warranty. I figure 1 month delay in repairs, that's plausible - crap happens, and while most repairs take 5-10 business days, I can understand it can sometimes go higher. Two months though.... My request for a warranty extension is being considered by the manager it was escalated to.
So, one last question for you folks reading this: am I being unreasonable, talking to Lenovo support one more time to request a 1 month extension of my warranty, given the length of time it's taken for repairs? I'll post the response Lenovo will give me tomorrow, as they've said they'll do.
One thing for sure: Lenovo's response will definitely influence my choice of brand from whom to buy a new computer (and it will influence the choice of my friends who've heard my issues, and maybe yours too). My particular repair problem may not come up often, but if it does happen to you, I'd be happy to know of your experience.
Thanks for sticking with me through the drama!

Both xp and windows 7 have video problems with my VGA connection using TV

both xp and windows 7 have video problems with my VGA connection using TV as my monitor when it gets to starting up windows no matter what version it will not I have let my mac on all night and still says starting windows or the windows 7 logo and nothing else will happen also when I use a 3rd patty software like peraills or other it works like a charm how to fix it?

To map the drive on your computer click on Start - RUN - type "\\192.168.1.1" and click ok... When prompted for Username and Password type "admin" and click ok... Now you will be able to see the folder which you have shared on your router, right click on it and select "Map network drive" and click on finish.
Now it will map the drive on your computer and you should be able to transfer the file from your computer to the USB drive.

80GB Classic with music, photo, and video problems

I have had a number of problems since getting my 80gb iPod classic.
1. Music: I keep finding songs that play perfectly in iTunes, but then stop a few seconds into the song when I play them back on the iPod. The first time this happened, I had to delete the song from iTunes and then rip it back into iTunes from the CD to get it to work. The other songs I haven’t tried to fix yet, but, so far, they are all from CD’s and not downloaded MP3’s. I also noticed that they were all ripped from the CD using an older version of iTunes.
2. Photos: Very few of the photos I tried to download to the iPod were transferred. I got a message saying they would not work on iPod, but no reason why. They are just simple .jpg files from my camera (Canon Powershot S3 IS). Most of the photos that did get transferred were corrupt. The pictures were all broken up and colors were switched around. I tried changing them to .bmp files and also changing the size to 640x480, and that helped some of them, but not all. The only pictures that worked flawlessly were not photos, they were cartoons.
3. Video: I have a number of QuickTime videos that work fine in iTunes until I convert them to iPod files. Most of the converted videos showed a blank white screen in thumbnail form in iTunes. When I play them, iTunes only displays a couple of frames, and the sound stutters. They all transferred to the iPod, but every time I tried to play one, the video would crash and the iPod would reset itself.
I’m thinking about exchanging my iPod for a new one, but I’m afraid that all of the problems are iTunes or Windows Vista related, and I might end up trading a good iPod for a defective one with the same software problems.

I did find that if I saved all of my photos as bitmaps, resized them to 640x480, and got rid of the dashes in the filenames, that they would work.

Weird Video problem and kernel panic!

Okay, so last ngiht I was running tech tool maintenence, and I had repair on. So, it finished scanning my startup volume (I was on my eDrive) and then I shut down and restarted. Now, it tried to start from my startup volume (tiger 4.7, with latest updates) and it says you need to restart your computer (which means there is a kernel panic, am I right?) I try safe mode to no avail, I even reset the PMU and reset the PRAM (but I didnt hear the starup noise again). So, I put in my backup HD, and it starts up, but wait! Now the video is horribly wrong! It is all in TERRIBLE quality and in mostly only greys, I mean it looks like a 4 mb vram video card, there are very few pixels of color( there are some intermitedly) and there is terrible ghosting, and I can barely read anything. so, I checked my display, and universal access settings, and fooled around with those, and nothing happened. So, now I try and start from my eDriveand it start, but now it has the same horrible color problem as my other drive. Oh boy, this is a new computer, and I already have a kernel pnic, and a video problem, what can I do? Thanks for any help. Matthew. I have a sawtooth, a radeon 9200 flashed video card, and the latest tiger.

What if you tried running mplayer with the following command :
mplayer -fs -zoom filename
As for the "too pixelish" problem well... you could try increasing the "nice" level (at least in VLC). For the other video players I don't know.
Last edited by FizDev (2007-11-01 02:50:28)

SCCM 2012 Client and Workstation Audio and Video Problems

SCCM 2012 SP1 environment.
We have pushed out the SCCM Client successfully to our systems - however we have found that on some computers the SCCM Client is causing an audio/video problem - specifically it appears to be with computers that connect monitors via DVI. As an example,
on my laptop (Dell e6420, Win7 x64) I have a docking station that connects my laptop to 2 external monitors. With the SCCM Client installed I cannot listen to music or watch videos - the result is an unusable choppiness/stuttering listening to music
and with a video the audio and video get out of sync. As well, my mouse no longer functions smoothly - it jumps around. This happens whether accessing content from a website or simply a local file on my computer. If I uninstall the SCCM client,
the issue goes away entirely. I have tried disabling the SMS and Remote control services but doing so does not resolve the issue, only a client uninstall. Note that this only happens when the laptop is on the docking station - with DVI - it doesn't
happen when the laptop is running without an external monitor or if plugged into an HDMI output device.
At first we believed this was limited to this model of laptop in our environment (Win8 or Win7 - both result in the same problem), but now we are hearing about "audio and video issues" on Dell 990 workstations as well. I believe these stations
have DVI connected monitors. Driver updates do not appear to resolve the issue.
Has anyone experienced this in their environment? Note that this happens on imaged workstations and workstations installed from a vanilla Windows 7 or 8 CD.

Try installing the client without Silverlight and see if it helps (this is only used for the Application Catalog).
ccmsetup.exe /skipprereq:silverlight.exe
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

I'm having problems with videos, they shake and the images break up back and forth into striped colors, how do I fix this?

I'm having problems with videos, they shake and the images break up back and forth into striped colors, how do I fix this?

1) This is because of software version 1.1. See this
thread for some options as to how to go back to 1.0,
which will correct the problem...
http://discussions.apple.com/thread.jspa?threadID=3754
59&tstart=0
2) This tends to happen after videos. Give the iPod a
minute or two to readjust. It should now be more
accurate.
3) This?
iPod shows a folder icon with exclamation
point
4) Restore the iPod
5) Try these...
iPod Only Shows An Apple Logo and Will Not Start
Up
iPod Only Shows An Apple Logo
I think 3,4, and 5 are related. Try the options I
posted for each one.
btabz
I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again

T61 problem. Display driver igfx has stopped responding and has successfully recovered + BSOD

T61 with Vista Business and intel GM965 video chips.
When playing World of Warcraft the game freezes periodically, the screen goes black and then, usually, it will get back to normal with the message about the display driver having stopped and recovered. Occasionally though it locks up and I get the BSOD and a reboot.
I tried using the latest drivers from Lenovo but it doesn't fix it. I tried uninstalling them and installed the Intel latest drivers as they were a newer release. Again, does not improve anything so I went back to the Lenovo ones for the time being.
I've set the game to the lowest spec video setting possible with lowest resolution possible etc but nothing seems to cure this problem.
Lenovo tech support told me something about timers being out and blamed it on Vista. I've asked for a more detailed, written response but, in the meantime I'd like to ask if anybody has been able to sort this problem out?
Looking online it seems that this is the single most common problem with laptops fitted with GM965 chipset so I'd have thought that between the BIOS and driver writers in Intel, Lenovo and Microsoft somebody could solve this or, at least tell everybody what it is and why it can't be solved so that people looking to play games on a laptop steer clear of this chipset.
Thanks.
Solved!
Go to Solution.

I a have solution to a problem that plagues many players!
I too have been having a problem where about three mins after logging into
WoW the screen goes black for 4-5 seconds, and then continues to do so every
30 seconds or so.
Here are my system specs.
GTW GT5412
OS: Vista Home Premium 32-Bit
Processor: Intel Core 2 1.80Ghz
Ram: 2038MB
Video Card: Intel 82945G Express Chipset Family.
I read all over on the internet trying to fix it, and everyone said to
download the 02/04/07 drivers from intel.com but every time I would run the
installer it would tell me they weren't made for my computer.
Here is how I eventually got it to work.
Step 1:
Download the 02/04/07 drivers from Intel (Version # 15.1) Put them somewhere
you'll remember. (Desktop)
http://downloadcenter.intel.com/Filt...eng&sType=prev
Step 2:
Go to [Start -> Control Panel -> Security -> Turn automatic updating on or
off (Under Windows Update) -> Select "Check for updates but let me choose
whether to download and install them.
Step 3:
Go to [Start -> Control Panel -> System and Maintenance -> Device Manager ->
Tell Vista to Continue -> Display Adapters -> Right-click and uninstall your
current drivers.
Step 4:
Restart your computer. When Vista opens you will get a message that it is
installing "VGA adapter drivers"
Step 5:
Run "winvista_151" (Driver installer you downloaded earlier)
It should work - and if it comes up with a "Unknown error" than just try
running the installer again.
It worked without a hitch for me, and for my girlfriend's computer too. Hope
it works for all you guys too!
Email me at [email protected] if u like the post plz i whant to know

K8T Neo and AGP ATI 9700 Pro...Video Problems!

This computer has been out of service for almost 6 months as I have replaced it with a new one. I grabed it today and loaded XP Pro on it without any problems. I have 2 monitors attached to the ATI 9700 Pro both running at 1600x1200. After configuring the new OS with updates and drivers I rebooted. This is where the problem surfaced.
PROBLEM:
I get to the XP PRO Loading screen with the progress bar. After a few seconds, 2 revolutions from the progress bar, the screens go black and a few seconds after that the monitors go into standby due to the lack of a video signal.
MORE INFO:
Several times when I tried to reboot, the PC would not display video at all and beep (the video error), 7 times (I think). Now this problem is not happening. Although I did get random characters all over the screen once.
I can boot into Safe Mode without any problems.
480w Thermaltake PSU
THEORIES:
The AGP slot is having problems changing the resolution from default to 1600x1200 for the monitors.
NOTE:
This computer has always had problems, 99% of which were playing video games. The problems I experienced in video games were that the computer would lock-up or automatically reboot after random time intervals when playing games. The games I noticed it having the most problems with were Everquest II and World of Warcraft. I replaced this machine with a Dell and have had no problems with either application. Therefore I can rule out faulty software. At the time before replacing this machine I tested everything, Memory, Hard Drives, etc...

AMD 64 (Don't Remember the Speed)
MSI KT8 Neo
2x512 MB PC????
Built-By-ATI 9700 Pro 128MB
1x200GB WD SATA
LiteOn DVD-ROM
Yamaha CD/RW
Realtek AC97 Onboard Audio w/ Cheap Dell Speakers
Some Realtek NIC (PCI)
Enermax Case wit ALOT of noisey fans (I hate noise)
Some dumb case light kit too.
Thermaltake 480W SilentPower
Windows XP SP2 (Installed a few days ago and still not working)
Click here for the PSU specs

JAN 4, 2012 As of the Upgrade to   Lion,. and the Email portion, ..   DOES NOT allow a Video Clip to be sent via the Email as the I-Photo is not supported by Video Clips ( Previous Leopard No problem clip and drag via Quick Time Pro to the email

JAN 4, 2012
As of the Upgrade to   Lion,.   2007 I-Mac -   the Email portion, ..   DOES NOT    allow a Video Clips to be sent via the Email
as the I-Photo is not supported by Video Clips ( Previous Leopard )
No problem clip and drag via Quick Time Pro to the email and select the Attchment size to send. . Depending on the
Size of the Video Clip ..      Now Lion only Export's   1 size, .   only and as a result . . teh File is TOO Large and
Will NOT send via E-Mail    ???
Between the   Issue of   the   Lion, and Email issues ,   and the   Upgrade of   I-Touch to 5.1 from 4.2.1
as my Photo Size is Huge ..    70,000 + photos in the Computer. .   and was   40,000 in the   I - Touch .. .
The New I-Touch too will not Load the same as Previously used on either my 16 GB   or 32 GB   Unit . .
          No Help . ..   so far, .. as a Apple user   since   1996 ..    I have Never experieanced such frustration    ???
               ( any one have some help if similar experiances    ?     thank you     )

JAN 4, 2012
As of the Upgrade to   Lion,.   2007 I-Mac -   the Email portion, ..   DOES NOT    allow a Video Clips to be sent via the Email
as the I-Photo is not supported by Video Clips ( Previous Leopard )
No problem clip and drag via Quick Time Pro to the email and select the Attchment size to send. . Depending on the
Size of the Video Clip ..      Now Lion only Export's   1 size, .   only and as a result . . teh File is TOO Large and
Will NOT send via E-Mail    ???
Between the   Issue of   the   Lion, and Email issues ,   and the   Upgrade of   I-Touch to 5.1 from 4.2.1
as my Photo Size is Huge ..    70,000 + photos in the Computer. .   and was   40,000 in the   I - Touch .. .
The New I-Touch too will not Load the same as Previously used on either my 16 GB   or 32 GB   Unit . .
          No Help . ..   so far, .. as a Apple user   since   1996 ..    I have Never experieanced such frustration    ???
               ( any one have some help if similar experiances    ?     thank you     )

Video Problems: IRQ and Driver Related??

Similar Messages

Maybe you are looking for