VIPRE Agent Shutdown - automatically re-enable?

No, there's nothing automatic that I've ever heard of.

No, none of them need rebooting. That column is empty for all of them.
My real question isn't about how to get the agents enabled, because I'm sure I can do that manually.
I'd like to know if VIPRE tries to automatically re-enable those agents. If so, is there any documentation that supports that? I looked in the admin guide and I couldn't find anything that indicates that VIPRE tries to automatically re-enable agents that have been shut down.
Thanks!

Similar Messages

Macbook pro 13 inch shutdown automatically after upgrade to Yosemite

My MacBook Pro 13 inch 2011 model... shutdown automatically any time during i'm using Mac. after startup one error show up
" Your computer shutdown because of Problem " What's the problem ?
Some times battery not waking up my Mac... means not able to power on the Mac... I must need to remove back panel and Unplugged the battery cable attached with board... after reinsert that cable... Mac working...
Safari freezing.
not able to input even track pad not work... during freezing... then i must need to sleep or restart the Mac.
Solve the problem... everything occurred after Upgradation of OS X Yosemite.

Contact OWC.
http://eshop.macsales.com/Service/contact/
You can also contact Crucial.
www.crucial.com

9i on Redhat Linux 8: 9i won't shutdown automatically during OS shutdown

Hello. I have 9.2.0.1.0 on Redhat Linux 8.0. After a lot of hassle, I finally got it starting automatically on OS startup. Now, the instance just won't shutdown during OS shutdown. The dbora script is fine; I could start/shutdown the instance using it. The rc?.d/K??dbora script works fine too; I could use it to shutdown the instance. But if I shutdown the OS, the instance just won't shutdown automatically. Any clue?
Brian
[email protected]

Hi,
RedHat checks for a file on /var/lock/subsys/<script name> to later execute the corresponding shutdown script.
In your startup script you must create a file in that directory, referencing the name of your script. For example, if your script is called dbora, you must use this instruction to create this file:
touch /var/lock/subsys/dbora
at the end of the 'start' code of your dbora script.
And, you must put the instruction
rm -f /var/lock/subsys/dbora
at the end of the 'stop' code of your dbora script.
For example, your dbora script could look like this:
case "$1" in
start)
... // your initialization code here
touch /var/lock/subsys/dbora
stop)
... // your shutdown code here
rm -f /var/lock/subsys/dbora
... // other code
Please write me if this doesn't work for you,
JLA

Sun Java Application Server - Domain and Node agent stop automatically

Hi,
We have installed Sun Java Application server 8.1 in a local zone on Solaris 10. The installation was successful.
A default domain (domain1) was created. We have deployed a sample application too.
The problem is that the domain and node-agent stop automatically. And need to be restarted from asadmin start-domain command.
Not sure why this problem is occurring. One solution given in Sun Java System AS 8.1 EE Troubleshooting Guide was to add these 2 lines in the /etc/inittab file to restart the domain and node-agent whenever the system re-boots.
das:3:respawn:/opt/SUNWappserver/bin/asadmin start-domain user admin passwordfile /opt/SUNWappserver/password.txt domain1
das:3:respawn:/opt/SUNWappserver/bin/asadmin start-node-agent user admin passwordfile /opt/SUNWappserver/password.txt node-agent-name
Pls help me if I can change this inittab file from the local zone and if changing this file has any implications on the other zones on Solaris 10.
Else is there any other way to resolve this problem?
Any help would be highly appreciated.
Thankyou.

One thing not clear from the post was,
* when it is going down automatically.
* Are you facing the same problem even after starting through the asadmin
* If so, Post the server.log from "domains/logs" during the starup.
If you want to bring it up with system reboot, You need to have a startup script for that in init.d and have the links to rc2/3.d.

RV120W WAN interface doesn't automatically re-enable after WAN connection is restored

I found that RV120W WAN interface doesn't automatically re-enable after a cable pull and re-plug. I have to go into the Status->System Summary and click the "Enable" button. Is this normal on this router? Can I prevent that from happening? I would hope this is NOT normal as this would mean that I would have to be on-site and login to the web interface to re-enable it after a power failure or WAN link loss.

Tekliu,
Thanks for the response. But, as I mentioned in my prior post, this is, unfortunately, the designed behavior for this device, at least with a static IP and no ISP login. Cisco Small Business Customer Support was clear on this and didn't even open a ticket. I asked that they submit a feature request to change this behavior in a future release. Of course, they couldn't make any promises.
One possible source of confusion is the different circumstances that can occur. In my testing, the interface does come back up automatically on a soft reboot. It also comes back up automatically if both the RV120W and the upstream (WAN) device are power cycled together. I believe this is because the upstream device comes up much faster and is up before the RV120W. The case we are talking about is when the upstream device is cycled or the cable is pulled while the RV120W stays up. In this case, the WAN port remains disabled until you manually select the button on the status page.
Thanks again for following up on this.

SAPCCM4X Agent Shutdown

Hello
A few SAPCCM4X agents are shutting down by itself. Analyzing the log of this agents the message below is informed:
Mon Aug 23 12:15:16 2010
CCMCTRL: ERROR: csm_show_file: no permission to read /usr/sap/PRD/SYS/profile/PR
D_G08_sapprdi
CCMCTRL: ERROR: csm_show_file: Please check sapccmsr.ini
I tried to find the profile mentioned in the warning but with no succes. I know that the cause of the shutdown of the agent is that because the correct profile is PRD_D08_sapprdi instead of PRD_G08_sapprdi. I also checked sapccmsr.ini but found nothing.
I can start the agent normally choosing the correct parameter (PRD_D08_sapprdi) but sometimes the agent shutdown by itself with the error message above.
Why the agent search for the wrong profile and where can I change it to the right profile?
Thanks in advance

Thank you Mani, I will make this test in only one appl server and monitor.
I will let you know the resul of my tests.
Regards

How to startup/shutdown automatic?

Hi, is it possible to have bootcamped windows 7, to startup and shutdown automatic after schedule?

It's possible but would require scheduling on both operating systems. You can write the boot drive to NVRAM and issue a reboot. That would start windows, what happens there would be controlled by windows. Inside windows you can automate using the control panel to select the mac boot drive and again, issue a reboot.
I think it would be more robust to have a small winbox running 24/7 than try to cobble together something that complicated on a single mac. There must be a reason behind your request. What is the reason, maybe there's another way to achieve the goal.

Ovs-agent starts automatically after reboot but hostname isnt resolvable

Hello Guys,
the theme is the problem. After rebooting a server the ovs-agent starts automatically but the DNS-Name of the SR isnt resolvable.
If I restart the agent by hand everything works fine. I checked the /etc/init.d, where its installed and the rc3.d. ovs-agent got S99 - which means, it starts last.
But which service is responsible for DNS? In my eyes the only thing that must be up, is networking, isnt it?
Do you have any hints for me?
Greetz

Please check your /etc/hosts and make sure that the hostname is on a separate line and not mapped to 127.0.0.1

WRT160N - Web Interface Shutdown Automatically

Hi guys,
I have a WRT160N modem. Its web interface, which is on 192.168.1.1, shutdown automatically after while. So, I cannot access to 192.168.1.1 after 3 or 4 hours of restarting my modem.
Also, there is another ocmputer in my home which disconnect automatically every 10 min. It is a new vaio laptop with a full update win vsita (I don't know about its ethernet card).
BTW, the firmware version of my rouret is: 1.53.0

You could try updating the firmware of your router.

Server get shutdown automatically

Dear All,
We are working on PServer4.1 and facing problem in batch file for same. While getting the following exception --"java.sql.BatchUpdateException: ORA-01400: cannot insert NULL into ("LOSDEV_NEW"."LOS_APP_DOCUMENT"."LAD_LDD_DOCID_N") " --
due to which server get shutdown automatically .
Can anyone provide me any suggestion for same ASAP.
Rgds,
Gurpreet

Dear All,
We are working on PServer4.1 What the heck is that?
and facing problem
in batch file for same. While getting the following
exception --"java.sql.BatchUpdateException:
ORA-01400: cannot insert NULL into
("LOSDEV_NEW"."LOS_APP_DOCUMENT"."LAD_LDD_DOCID_N")
] " --So somewhere in this is an Oracle DB server.
due to which server get shutdown automatically .Which server is shutting down?
ASAP.
I'll bet. Kill the production server did you?

My Qosmio shutdowns automatically after a while

Hello.
My computer already have been in the support center.
Since it returns I have a huge problem.
When I'm playing games it shutdowns automatically after a while.
After a few times I found why. The temperature of the gpu goes over 90degrees.
*First- I remeber in the past to hear more noise from the gpu fan, even if it is still working...
Is there any way to change or increase the speed of that fan?
Regards
Diogo Fonseca

This is a common issue with this model, apparently the thermal grease used from the factory had issues that were not disclosed to the support sites, but after 18 months to 2 years my unit was doing exactly this,
i tried speed fan (and other apps) but at best it monitored the temps for convenient viewing,
I finally bit the bullet and bought some arctic white thermal compound ( around $7-12 a jar) dismantled the beast, carefully cleaned and applied the new grease (thin and even) and it hasn't missed a beat in 2 1/2 years.
The x series cooling vents are set one in front of the other and consequentially become easily clogged so make sure to regularly clean them before dust compounds and dismantling to clean is required.

I've been trying to get a book sample and a dialogue box comes up saying: To receive book samples, you need a device with the latest versions of iOS and ibooks installed and Automatic Download enabled. I have iBooks installed and automatic download enabl

I've been trying to get a book sample and a dialogue box comes up saying: To receive book samples, you need a device with the latest versions of iOS and ibooks installed and Automatic Download enabled. I have iBooks installed and automatic download enabled. I don't know if it's talking about a new version of iOS on my iphone or my laptop. You people sure like to make things difficult.

trevbeats,
I had the same problem. It turned out the issue for me was that I had Automatic downloads turned off on my devices!
see below how to turn it on.
Tap Settings > iTunes & App Stores on your device.
Tap Sign In if you're not already signed in to the iTunes Store.
Enter your Apple ID and password.
Tap On/Off switch to enable or disable Automatic Downloads for each content type.

My time Capsule is now 3 months in operation and now every day shutdown automatically and the power is completely off and my network is down. Any idea what is happening?

My time Capsule is now 3 months in operation and now every day shutdown automatically and the power is completely off and my network is down. Any idea what is happening?

The Time Capsule has a defective power supply and it needs to be exchanged as soon as possible. Soon, you will not be able to power it back up at all after it shuts down.
Take the Time Capsule to an Apple Store, if you have one near you, or contact Apple Support to get the process started.
http://www.apple.com/support/contact/

Z10 Shutdown Automatically

Hello team,
I hv bought blackberry Z10 4 months ago but from very first week I m facing a problem that my phone shutdowns automatically. Most probaly when battery is near about 70%. In first month it happens on 27% but then it shuffles everyday and now its difficult to tell when it will shutdowns. It shows a message "turning off device". Moreover it shows battery empty when I try to swith it on. There is also charging problm with the device that sometimes it stop charging.. plzz help me out with this problm.. as soon as possible

try this,
connect the device to BlackBerry link.by connecting it the conputer using USB cable(you can use your USB charger here)
then while the device is still connected to the computer do not remove the USB but remove the battery.
if BlackBerry link will be able to detect the device you can perform a back up(to keep the data of the device) then update the device. you need internet connection.
this should fix the issue if the problem is with the software
let me know what happens
Click if you want to Thank someone. If Problem is resolved, so that others can make use of it.

Agent "User" is not enabled for enterprise voice. Only Enterprise Voice users can receive Response Group calls.

I have standard edition Lync 2013 deployed. I have also enabled enterprise Voice for all my users.
When I try to create a response group under group tab, I add the enterprise voice enabled users to the group and click on commit I get this warning:
Agent "User" is not enabled for enterprise voice. Only Enterprise Voice users can receive Response Group calls.
This is clearly a glitch since the users are already enabled for enterprise voice. Has anyone come across this issue before?
Thanks

Have you tried restarting the Response Group service? Are you able to add any EV enabled users to this RGS?
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Lync Sorted blog

VIPRE Agent Shutdown - automatically re-enable?

Similar Messages

Maybe you are looking for