Vld-1134 on pluggable mapping after importing MDL

After importing an MDL file and setting the oracle modules to the correct locations, I can deploy just anything in my target module, except mappings that include a pluggable mapping that references a view, which is correctly deployed on the target module ( validation raises vld-1134). Referencing that view directly from any mapping doesn't raise any problem.
Are there aditional configuration steps required to succesfully validate thoose mappings ?
Thanks in advance,
Pedro Almeida

Can you try synchronizing (inbound) the view to the pluggable mapping? Then try validating.
Cheers
David

Similar Messages

  • Pluggable Mapping causing VLD 1600 validation error

    We are using OWB client 11g R2 on windows. I am trying to use the pluggable mapping functionality to use for our reference data lookups, whereby we want to retrieve full descriptions in several languages from the reference data table. The standalone mapping takes in two parameters in the input signature, both NVARCHAR2, a reference type and reference code to perform the lookup. There is then a key lookup whose output (5 NVARCHAR2 values) goes to an expression which has a CASE statement to evaluate the results before passing them to the output signature.
    The problem is when using the pluggable mapping in a normal mapping it does not validate, and I am getting the VLD-1600: Lookup Condition for Key Lookup REF_DATA_APEX is blank. error. The key lookup of course does have a Lookup Condition.
    The mapping is a simple one, taking a source and mostly mapping directly to the target. It is set based only. I have one source attribute being passed to the pluggable mapping along with a constant, and the output is passed to an expression (which doesn't actually do anything, but without this I got API8003 error when connecting the output attributes to the target attributes).
    Is there something I am missing in how to implement this feature ?

    Hi,
    I am having the same problem with pluggable mapping and lookup operator, when mapping is syncronized it gives error VLD1108. I believe it is a bug of OWB 11.2.0.2.
    Did you manage to resolve it?
    Thanks,
    Alex

  • DTW Sort Error - after mapping during import

    I got the "Sort Error - after mapping during import" message in DTW. (version 8.8)
    I would like to import warehouse info for items.
    My itemcodes are fix 15 character numbers, like this: 10204150020011
    The note nr. [1331130|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/oss_notes/sdn_oss_sbo_dtw/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d31333331313330%7d] said that I can't use recordkey like this.
    Do you have any idea how can I import thees information with DTW?
    Thank you,
    Attila Sarkady

    Dear All
    Please give correct and complete information
    i have tested every kind of combination;
    - recreate the template with the dtw for Items = i have UDF's
    - ADD the column RecordKey   !!! unbelievable that we have to do this
    - i have entered a nr 1 in it (even when we had already 850 items in the database)
    (and of course the hints of Gordon - columns as text, start with basic... - and use CSV format)
    now at last i can import the record line
    greetings
    philippe

  • Tables in mapping losing location after import

    Hi, I have 2 OWB repositories (lets say Dev and Prod). Both contain the same objects but reside on different databases.
    If I make a change in a mapping in Dev, export the mapping and import into Prod, the table references within the mapping have lost their locations and I need to edit the mapping and point them to the correct locations.
    Any way around this or explaination of why it is happening ?
    Thanks
    Paul

    Hi Paul,
    try to import the mappings using "match by name" and not "match by universal identifier".
    The default import mode is "match by universal identifier". If your location on prod has an identifier different from the one on dev, it will not be found during import.
    If you import using "match by name", owb will look for a location on prod with the same name as the location on dev.
    Regards,
    Carsten.

  • Import mdl file problem

    Hi ,
    i have oracle 11.1.0.7 on windows 2003 SP2 32 bit , i imported a MDL file created by oracle 11.1.0.6 (windows 2003 SP2 32 bit) .
    i can not run maps correctly and the situation is not stable.
    do i need any patch or do more activity after importing metadata ?
    thanks for your consideration
    Padideh

    Error occurred importing from file "D:\SIGMA PROJ3CT\MIS JAMBI JOHAN 20100622\BPDJAMBI-20100622_0943.mdl".
    java.lang.Exception: CNV0002-0038(ERROR): Cannot write to file ./../../reposasst/converter.properties. Please make sure that write privileges are enabled or that disk is not full.
         at oracle.wh.repos.pdl.metadataloader.converter.util.Utilities.getPreferences(Utilities.java:750)
         at oracle.wh.repos.pdl.metadataloader.converter.WBConverter.<init>(WBConverter.java:372)
         at oracle.wh.repos.pdl.metadataloader.common.WBMDLCommon.<init>(WBMDLCommon.java:207)
         at oracle.wh.repos.pdl.metadataloader.common.MDLFileParserCommon.<init>(MDLFileParserCommon.java:128)
         at oracle.wh.repos.pdl.metadataloader.Import.MDLImport.<init>(MDLImport.java:338)
         at oracle.wh.repos.pdl.metadataloader.Import.MDLRunImport.instantiateMDLImport(MDLRunImport.java:383)
         at oracle.wh.repos.pdl.metadataloader.Import.MDLRunImport.internalRunImport(MDLRunImport.java:424)
         at oracle.wh.repos.pdl.metadataloader.Import.MDLRunImport.runImport(MDLRunImport.java:503)
         at oracle.wh.ui.metadataloader.Import.MDLUpgradeImportTransaction.internalRunImport(MDLUpgradeImportTransaction.java:218)
         at oracle.wh.ui.metadataloader.Import.MDLUpgradeImportTransaction.run(MDLUpgradeImportTransaction.java:319)
    I've a problem with this issue .. i think this issue because of only privileges matter .. but it's not .. could anybody help me out of this issue ?
    Thank so much before. GBU.

  • Cannot edit chapter names in iDVD after importing movie from iMovie

    I have no trouble customizing iDVD (version 5.0.1) menu page after importing iMovie directly (instead of going to QT as interim step). But the names of the chapter markers are file names for video clips, title pages and transitions. The iMovie help says to change the names in the space next to the 'thumbnails' of chapters found in iDVD. THERE ARE NO THUMBNAILS. And there is no way I could find, using menu options or clicking on the chapter frames shown in 'map' mode to type in anything.
    There are other problems, like getting rid of the default "Travel Cards' stuff...like I can drop a still photo in for a custom background, but the default 'celluloid design' banner still rolls up in previw mode. If you can also help with that, great. But the main thing right now is getting these chapter names change.

    VJK,
    You are the third person who has taken a crack at this. I don't know if you read my last reply which detailed the situation. But if you did and the 'menu' you refer to is the main menu page, that is not the problem; I can change text there. I am talking about the submenu for 'Scene Selections', which I have only been able to access via map mode.
    In map mode I cannot highlight the names. Period. Can't do it no matter where I place the cursor or carefully click.
    In preview mode, when the Scene Selection sub-menu page appears whenever you drag the cursor over a chapter name it automatically highlights so any clicking will either do nothing (if a real careful click, trying to highlight text and not trigger off play of the movie chapter) or just start play for the movie chapter.
    So...how does this newbie get to the 'menu' you mention where I can click on a chapter name in order to type new text?
    You will be able to change the names in the menu, but
    depending upon your mouse, etc, it can be a little
    particular.
    Place the cursor at the very beginning of the word
    you want to change. Click once .. this should hi-lite
    the word. Click again, it should make the word go
    blue (or in a blue box) then you can delete and
    re-type.
    Be sure to save the proj
    I have found that even after saving and successfully
    burning the project, if I return to it later the
    changes seem to have gone away ... so if you go back
    to it later, just double check that everything is
    kosher

  • Create key mapping using import manager for lookup table FROM EXCEL file

    hello,
    i would like create key mapping while importing the values via excel file.
    the source file containing the key, but how do i map it to the lookup table?
    the properties of the table has enable the creation of mapping key. but during the mapping in import manager, i cant find any way to map the key mapping..
    eg
    lookup table contains:
    Material Group
    Code
    excel file contain
    MatGroup1  Code   System
    Thanks!
    Shanti

    Hi Shanti,
    Assuming you have already defined below listed points
    1)  Key Mapping "Yes" to your lookup table in MDM Console
    2) Created a New Remote System in MDM console
    3) proper rights for your account for updating the remote key values in to data manager through import manager.
    Your sample file can have Material Group and Code alone which can be exported from Data Manager by File-> Export To -> Excel, if you have  data already in Data Manager.
    Open your sample file through Import Manager by selecting  the remote system for which you want to import the Key mapping.
    (Do Not select MDM as Remote System, which do not allows you to maintain key mapping values) and also the file type as Excel
    Now select your Soruce and Destination tables, under the destination fields you will be seeing a new field called [Remote Key]
    Map you source and destination fields correspondingly and Clone your source field code by right clicking on code in the source hierarchy and map it to Remote Key if you want the code to be in the remote key values.
    And in the matching criteria select destination field code as a Matching field and change the default import action to Update NULL fields or UPDATED MAPPED FIELDS as required,
    After sucessfull import you can check the Remote Key values in Data Manager.
    Hope this helps
    Thanks
    Sowseel

  • Changing default route after import route-target

    Hi there,
    Before I import route-target, the default route is set to 192.168.0.22 . After import the vrf, suddently it change to another PE, which is 192.168.0.19 . How do I force the default route to use 192.168.0.22 ?
    before adding route-target import 4000:1
    PE#sh ip route vrf customer 0.0.0.0
    Routing entry for 0.0.0.0/0, supernet
    Known via "bgp 100", distance 200, metric 0, candidate default path,
    type internal
    Last update from 192.168.0.22 00:14:08 ago
    Routing Descriptor Blocks:
    * 192.168.0.22 (Default-IP-Routing-Table), from 192.168.0.3, 00:14:08 ago
    Route metric is 0, traffic share count is 1
    AS Hops 0
    PE#sh ip bgp vpnv4 vrf customer 0.0.0.0
    BGP routing table entry for 100:239:0.0.0.0/0, version 335256
    Paths: (2 available, best #2, table customer)
    Not advertised to any peer
    Local
    192.168.0.22 (metric 4) from 192.168.0.45 (192.168.0.45)
    Origin incomplete, metric 0, localpref 100, valid, internal
    Extended Community: RT:100:120
    Originator: 192.168.0.50, Cluster list: 192.168.0.45
    Local
    192.168.0.22 (metric 4) from 192.168.0.3 (192.168.0.3)
    Origin incomplete, metric 0, localpref 100, valid, internal, best
    Extended Community: RT:100:120
    Originator: 192.168.0.50, Cluster list: 192.168.0.3
    after adding route-target import 4000:1
    PE#sh ip route vrf customer 0.0.0.0
    Routing entry for 0.0.0.0/0, supernet
    Known via "bgp 100", distance 200, metric 0, candidate default path,
    type internal
    Last update from 192.168.0.19 00:00:09 ago
    Routing Descriptor Blocks:
    * 192.168.0.19 (Default-IP-Routing-Table), from 192.168.0.3, 00:00:09 ago
    Route metric is 0, traffic share count is 1
    AS Hops 0
    PE#sh ip bgp vpnv4 vrf customer 0.0.0.0
    BGP routing table entry for 100:239:0.0.0.0/0, version 335386
    Paths: (3 available, best #1, table customer)
    Flag: 0x1820
    Not advertised to any peer
    Local, imported path from 4000:1:0.0.0.0/0
    192.168.0.19 (metric 2) from 192.168.0.3 (192.168.0.3)
    Origin incomplete, metric 0, localpref 100, valid, internal, best
    Extended Community: RT:4000:1
    Originator: 192.168.0.19, Cluster list: 192.168.0.3
    Local
    192.168.0.22 (metric 4) from 192.168.0.45 (192.168.0.45)
    Origin incomplete, metric 0, localpref 100, valid, internal
    Extended Community: RT:100:120
    Originator: 192.168.0.50, Cluster list: 192.168.0.45
    Local
    192.168.0.22 (metric 4) from 192.168.0.3 (192.168.0.3)
    Origin incomplete, metric 0, localpref 100, valid, internal
    Extended Community: RT:100:120
    Originator: 192.168.0.50, Cluster list: 192.168.0.3
    thanks in advance.
    maher

    Maher,
    Here's an example:
    router bgp xx
    address-family vpnv4
    nei x.x.x.x route-map localpref in
    ip extcommunity 1 permit rt 4000:1
    route-map localpref permit 10
    match extcommunity 1
    set local-preference 110
    route-map localpref permit 20
    BTW: if the route with RT 4000:1 had a different RD both routes would get imported in the VRF and you could set the local-pref using an import map instead of an inbound route-map on the VPNv4 session.
    Hope this helps,

  • What are the steps to perform in sap pi after importing Efilling XI content

    what are the steps to perform in sap pi after importing Efilling XI content

    Hi ,
      The government agency processing the E filing might have a system that is capable of receiving http requests.
    That is a possible explanation for your "why" question.
    regarding, what has to be done in PI, you just need to configure in ID.
    1) Create business service (Communication component) for the receiver.
    2) create  a HTTP receiver adapter.
    3) Import the business system for your sap system
    4) Create a recdeiver determination
    5) Create a interface determination, and give your mapping name
    6) Create a receiver agreement using the http communication channel you have created
    best Regards,
    Ravi

  • Losing Lookup Condition after import

    For transferring a project from development to test (and later production) we're using metadata export/import.
    After import into the 'test repository' we noticed that in a mapping the Lookup Condition of several Key Lookups are missing, in fact these Key Lookups are all using the same Table definition.
    Has anyone experienced this problem?
    And, of course, is there a cure?
    We're using
    Warehouse Builder 9.0.3.37.0
    Repository 9.0.3.0.1
    Oracle db. 9.2.0.2.1
    Regards,
    Peter van Leeuwen

    We resolved this issue.
    The problem occurs when table names are long. The original table names was 27 characters long. In a mapping we have 3 lookups all based on the same table.
    We lost the lookup condition in 2 cases, that is project export/import (from Development to Test) and copy mapping.
    We solved the problem by shortening the table name.
    Peter

  • Change OWB-user password after import

    Hi there,
    I set up a new empty 11.2 Warehousbuilder Repository instance, created a workspace and several DB-users (not in OWB) to prepare for MDL-Import.
    Into that I run MDL-Import from 10.2 (it creats a MDL-file for 11.2), which was successfuly imported.
    Immediatly after import I can not see any content as workspace-owner (may be logical since WS-Owner is not owner of any object imported ?)
    and I can't connect as OWB-user as well.
    So I tried to change imported OWB-user's password, but how to ?
    OWB Install and Admin guide says in chapter 13.10.2, that I would not need to do anything special in OWB, just set password in DB as usual.
    But I can't connect as those OWB-user !?
    So how to change OWB-users password correctly ?
    thanks for any hint.
    LaoDe

    seems my question wan't clear enough.
    So here is an easy scenario step by step:
    0. create a new empty Instance 11.2. Create several schema with only connect, resource grants to match later OWB-import's OWB-users.
    1. create new, empty repository 11.2 + 1 workspace. OWB-Schema, who created WS = OWB_WS_OWNER
    2. run Import from Export MDL-file. This includes several OWB-users.
    3. After Import successful endet, no new objects, OWB-users or anything new is to see. (still beeing OWB_WS_OWNER). Even restart OWB does not show any new objects or OWB-users.
    4. Can't connect to OWB with 1 of those imported Schema, to see any imported objects. Might be logical, because OWB-password for imported OWB-Schemas is unkown -> DB-Password does not help (what is logical).
    5. As OWB_WS_OWNER or OWBSYS: how to change those imported OWB-user's password, when I don't see them as OWB-users ???
    please help, thanks Laode

  • How to remove override after importation of XML automatically

    Does anyone know of the best way to automate the removeoverride concept after importation of XML into an InDesign template without manually threading to a new page.
    I am trying to write a batch program that will create multiple XML files and then generate an InDesign document for each XML file from a predefined InDesign template file that is already mapped to the XML structure.

    RESOLVED

  • Can not refresh snapshot changes after importing data of master site

    Hello !
    I have two database computer,one as master site,one as snapshot site.Because the error of the hard disk of master computer,I use the exporting data file to recover my database.after importing ,I found I can't refresh the refreshgroup on snapshot,who can tell me why?
    thinks in advance!
    (exp system/manager full=y inctype=complete file='/home/save/backdata/xhsdcomp.dat')
    (imp system/manager inctype=system full=Y file='/home/save/backdata/xhsdcomp.dat'
    imp system/manager inctype=restore full=Y file='/home/save/backdata/xhsdcomp.dat')
    null

    You haven't listed the errors that you're receiving when attempting to refresh your refresh group, but if your snapshots are attempting to fast refresh, I suspect it's because the creation timestamp of the snapshot log on the master site is newer than the creation timestamp of the snapshot. In this case you will need to do a complete refresh of the snapshot (or drop and recreate the snapshot) before you will be able to fash refresh it again.
    If this is not the case, please post the errors you are receiving when you attempt to refresh the refresh group.
    HTH,
    -- Anita
    Oracle Support Services
    null

  • Apex Application not working after importing to my apps schema...

    Hi friends,
    I created one DB application in my sample schema that is associated with apex 4.0.....
    Application details:
    *) login page(where i will be giving username and password)
    *) page 1 (consist of several form fields, like
    --->name:
    --->module:
    --->projects:
    ----->email:
    the above are the fields, if i put any entries in the above field means, it will get automatically inserting in the report column, which is also in the same page consist of the above fields in the table manner...
    since this report table consist of an edit icon in front, if i clicked the edit icon of an one row means, it will go to another page..
    *) i.e. page 3(consist of the same fields with entries in it automatically corresponding to the each and every row, suppose if i want to update any changes means i can update in it....
    this is my application that i developed it is working well with in the sample schema apex 4.0..
    What i did is i created a new workspace with APPS schema in it...and i have imported my application that i developed in sample schema to APPS schema....
    Since after importing to APPS schema...when i tried to open the application, it is not showing any datas in it...That is due to the tables that are supporting the application is not in APPS schema, so what i did is i have given grant privilege to the respective tables and also i have created a synonym for accessing the table in APPS schema for supporting the application.....
    Now if i tried to put any entries in the form in page 2, it is getting inserting in the report column which is also in the page2....
    But my problem starts here, if i clicked the edit icon symbol in each and every row of the report column it is going to the page 3 which has a respective form fields, but it is not showing any entries in it automatically, and if i tried to put any entry in it, it is not getting updating in the report table......
    why this problem occurred for my application in APPS schema....But my application works very well within the sample schema......why it is not showing any entries in the form automatically soon after i clicked the edit icon in each and every row.....
    i couldn't know what is the real problem behind this..... help me friends.
    As this is my urgent requirement in my project..Reply me ASAP...
    Thanks in Advance..
    Regards,
    Harry...

    First, try a system reset although I can't give you any confidence.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • Problem on CLOB datatype after import

    I got problem and call to Oracle support and they use DUL for extract data from datafile to dump file and I import everything is done and no error but when I check in CLOB datatype that have space(blank character) separate each character see below
    Original
    Oracle
    After Import
    O R A C L E
    So the application cannot execute those data.
    Anyone have solution how to fix this problem?
    Thanks,
    Taohiko

    if you use a direct insert you are restricted to 4000 characters.
    You can put your value in a varchar2 variable and that allows you to insert up to 32767 characters.
    declare
    my_clob_variable := rpad('x','X',25000);
    begin
    insert into my_table(my_clob_column)
    values(my_clob_variable);
    end;

Maybe you are looking for

  • Error while running DOS command in Java

    Hi all, I use "runtime" class to execute a DOS command "copy C:\\pathname\\*.* C:\\backupPathname\\". But I saw an error msg "CreateProcess: copy C:\pathname\*.* C:\backupPathname\ error=2". I did create a folder C:\backupPathname\ before running the

  • Macbook Pro 17 shuts down in minutes even when battery is full

    Hi, this has been going on for a while, i took it to a Apple Service Center in Barcelona Spain with a friend who had the same problem, well, her MBP turned back on with a black screen and they replaced the video card for free, and when they looked at

  • How do you create folders in mail in iOS eight?

    Can anyone tell me if there a way to create new folders in the mail in IOS 8? I'm not talking about POP or IMAP-I don't know what these are and I don't care. In the previous iOS versions, I have always been able to simply create a new folder. Once ag

  • ADFS on a Domain Controller

    This is more of a design question and I am not sure if I will go with Windows 2003 r2 or 2008.  We have several Domain Controllers and we want to start playing around with ADFS.  I am going to build a seperate Federated Services Proxy server in our D

  • How can i print somethings

    Hi i would like print a document but i can't do it.I don't understood what i have to do with printerjob and printable class.Could you help me please????