VMware server: Error trying to compile the vmmon and vmnet modules.

Hello,
I am trying to install VMware server following the wiki: http://wiki.archlinux.org/index.php/Ins … _on_Arch64
I can't get very far as I can't even compile vmmon and vmnet and I have no idea on how to solve this problem
[21:02:38][root@phusis]
[/opt/arch32/root/vmware-server-distrib/lib/modules/source]Arch64# make -C vmmon-only auto-build HEADER_DIR=/usr/src/linux-`uname -r`/include CC=gcc SUPPO_SMP=1 GREP=grep IS_GCC_3=no
Using 2.6.x kernel build system.
make: Entering directory `/opt/arch32/root/vmware-server-distrib/lib/modules/source/vmmon-only'
make -C /usr/src/linux-2.6.28-ARCH/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. modules
make[1]: Entering directory `/usr/src/linux-2.6.28-ARCH'
CC [M] /opt/arch32/root/vmware-server-distrib/lib/modules/source/vmmon-only/linux/driver.o
In file included from /opt/arch32/root/vmware-server-distrib/lib/modules/source/vmmon-only/./include/x86.h:20,
from /opt/arch32/root/vmware-server-distrib/lib/modules/source/vmmon-only/./include/machine.h:24,
from /opt/arch32/root/vmware-server-distrib/lib/modules/source/vmmon-only/linux/driver.h:15,
from /opt/arch32/root/vmware-server-distrib/lib/modules/source/vmmon-only/linux/driver.c:49:
/opt/arch32/root/vmware-server-distrib/lib/modules/source/vmmon-only/./include/x86apic.h:79:1: warning: "APIC_BASE_MSR" redefined
In file included from /usr/src/linux-2.6.28-ARCH/arch/x86/include/asm/numa_64.h:5,
from /usr/src/linux-2.6.28-ARCH/arch/x86/include/asm/numa.h:4,
from /usr/src/linux-2.6.28-ARCH/arch/x86/include/asm/acpi.h:28,
from /usr/src/linux-2.6.28-ARCH/arch/x86/include/asm/fixmap_64.h:15,
from /usr/src/linux-2.6.28-ARCH/arch/x86/include/asm/fixmap.h:7,
from /usr/src/linux-2.6.28-ARCH/arch/x86/include/asm/apic.h:8,
from /usr/src/linux-2.6.28-ARCH/arch/x86/include/asm/smp.h:13,
from include/linux/smp.h:30,
from include/linux/topology.h:33,
from include/linux/mmzone.h:763,
from include/linux/gfp.h:4,
from include/linux/kmod.h:22,
from include/linux/module.h:13,
from /opt/arch32/root/vmware-server-distrib/lib/modules/source/vmmon-only/linux/driver.c:12:
/usr/src/linux-2.6.28-ARCH/arch/x86/include/asm/apicdef.h:132:1: warning: this is the location of the previous definition
In file included from /opt/arch32/root/vmware-server-distrib/lib/modules/source/vmmon-only/./include/machine.h:24,
from /opt/arch32/root/vmware-server-distrib/lib/modules/source/vmmon-only/linux/driver.h:15,
from /opt/arch32/root/vmware-server-distrib/lib/modules/source/vmmon-only/linux/driver.c:49:
/opt/arch32/root/vmware-server-distrib/lib/modules/source/vmmon-only/./include/x86.h:830:1: warning: "PTE_PFN_MASK" redefined
In file included from /usr/src/linux-2.6.28-ARCH/arch/x86/include/asm/pda.h:8,
from /usr/src/linux-2.6.28-ARCH/arch/x86/include/asm/current.h:19,
from /usr/src/linux-2.6.28-ARCH/arch/x86/include/asm/processor.h:15,
from include/linux/prefetch.h:14,
from include/linux/list.h:6,
from include/linux/module.h:9,
from /opt/arch32/root/vmware-server-distrib/lib/modules/source/vmmon-only/linux/driver.c:12:
/usr/src/linux-2.6.28-ARCH/arch/x86/include/asm/page.h:22:1: warning: this is the location of the previous definition
In file included from /opt/arch32/root/vmware-server-distrib/lib/modules/source/vmmon-only/linux/vmhost.h:13,
from /opt/arch32/root/vmware-server-distrib/lib/modules/source/vmmon-only/linux/driver.c:71:
/opt/arch32/root/vmware-server-distrib/lib/modules/source/vmmon-only/./include/compat_semaphore.h:5:27: error: asm/semaphore.h: No such file or directory
/opt/arch32/root/vmware-server-distrib/lib/modules/source/vmmon-only/linux/driver.c:146: error: unknown field 'nopage' specified in initializer
/opt/arch32/root/vmware-server-distrib/lib/modules/source/vmmon-only/linux/driver.c:147: warning: initialization from incompatible pointer type
/opt/arch32/root/vmware-server-distrib/lib/modules/source/vmmon-only/linux/driver.c:150: error: unknown field 'nopage' specified in initializer
/opt/arch32/root/vmware-server-distrib/lib/modules/source/vmmon-only/linux/driver.c:151: warning: initialization from incompatible pointer type
/opt/arch32/root/vmware-server-distrib/lib/modules/source/vmmon-only/linux/driver.c: In function 'LinuxDriver_Ioctl':
/opt/arch32/root/vmware-server-distrib/lib/modules/source/vmmon-only/linux/driver.c:1670: error: too many arguments to function 'smp_call_function'
make[2]: *** [/opt/arch32/root/vmware-server-distrib/lib/modules/source/vmmon-only/linux/driver.o] Error 1
make[1]: *** [_module_/opt/arch32/root/vmware-server-distrib/lib/modules/source/vmmon-only] Error 2
make[1]: Leaving directory `/usr/src/linux-2.6.28-ARCH'
make: *** [vmmon.ko] Error 2
make: Leaving directory `/opt/arch32/root/vmware-server-distrib/lib/modules/source/vmmon-only'
Do you know what I could do to sort the above issue?
Thanks
Ludo

hi,
i am not able to use the patch. there are always missing files and i dont know the path for this files.
here is the output of the console:
patch -p1 -i /home/felix//Desktop/vmware-workstation-6.5.1.126130-2.6.29_x86_64.patch
can't find file to patch at input line 4
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
|diff -Naur orig/vmblock-only/include/compat_wait.h new/vmblock-only/include/compat_wait.h
|--- orig/vmblock-only/include/compat_wait.h 2008-10-28 22:47:20.000000000 -0700
|+++ new/vmblock-only/include/compat_wait.h 2009-01-20 04:49:44.000000000 -0700
File to patch:
Skip this patch? [y] y
Skipping patch.
1 out of 1 hunk ignored
can't find file to patch at input line 19
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
|diff -Naur orig/vmci-only/include/compat_wait.h new/vmci-only/include/compat_wait.h
|--- orig/vmci-only/include/compat_wait.h 2008-10-28 22:47:21.000000000 -0700
|+++ new/vmci-only/include/compat_wait.h 2009-01-20 04:49:44.000000000 -0700
File to patch: y
y: No such file or directory
Skip this patch? [y]
Skipping patch.
1 out of 1 hunk ignored
can't find file to patch at input line 34
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
|diff -Naur orig/vmmon-only/include/compat_wait.h new/vmmon-only/include/compat_wait.h
|--- orig/vmmon-only/include/compat_wait.h 2008-10-28 22:47:18.000000000 -0700
|+++ new/vmmon-only/include/compat_wait.h 2009-01-20 04:49:44.000000000 -0700
File to patch:
Skip this patch? [y] y
Skipping patch.
1 out of 1 hunk ignored
can't find file to patch at input line 49
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
|diff -Naur orig/vmmon-only/include/x86apic.h new/vmmon-only/include/x86apic.h
|--- orig/vmmon-only/include/x86apic.h 2008-10-28 22:47:17.000000000 -0700
|+++ new/vmmon-only/include/x86apic.h 2009-01-20 04:49:44.000000000 -0700
File to patch:
Skip this patch? [y] y
Skipping patch.
1 out of 1 hunk ignored
can't find file to patch at input line 64
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
|diff -Naur orig/vmmon-only/linux/driver.c new/vmmon-only/linux/driver.c
|--- orig/vmmon-only/linux/driver.c 2008-10-28 22:47:18.000000000 -0700
|+++ new/vmmon-only/linux/driver.c 2009-01-20 04:49:44.000000000 -0700
File to patch:
Skip this patch? [y] y
Skipping patch.
1 out of 1 hunk ignored
can't find file to patch at input line 85
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
|diff -Naur orig/vmmon-only/linux/hostif.c new/vmmon-only/linux/hostif.c
|--- orig/vmmon-only/linux/hostif.c 2008-10-28 22:47:17.000000000 -0700
|+++ new/vmmon-only/linux/hostif.c 2009-01-20 04:49:44.000000000 -0700
File to patch:
Skip this patch? [y] y
Skipping patch.
4 out of 4 hunks ignored
can't find file to patch at input line 173
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
|diff -Naur orig/vmmon-only/linux/vmmonInt.h new/vmmon-only/linux/vmmonInt.h
|--- orig/vmmon-only/linux/vmmonInt.h 2008-10-28 22:47:17.000000000 -0700
|+++ new/vmmon-only/linux/vmmonInt.h 2009-01-20 04:49:44.000000000 -0700
File to patch:
Skip this patch? [y] y
Skipping patch.
1 out of 1 hunk ignored
can't find file to patch at input line 188
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
|diff -Naur orig/vmnet-only/bridge.c new/vmnet-only/bridge.c
|--- orig/vmnet-only/bridge.c 2008-10-28 22:47:18.000000000 -0700
|+++ new/vmnet-only/bridge.c 2009-01-20 04:49:44.000000000 -0700
File to patch:
Skip this patch? [y] y
Skipping patch.
1 out of 1 hunk ignored
can't find file to patch at input line 203
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
|diff -Naur orig/vmnet-only/compat_wait.h new/vmnet-only/compat_wait.h
|--- orig/vmnet-only/compat_wait.h 2008-10-28 22:47:19.000000000 -0700
|+++ new/vmnet-only/compat_wait.h 2009-01-20 04:49:44.000000000 -0700
File to patch:
Skip this patch? [y] y
Skipping patch.
1 out of 1 hunk ignored
can't find file to patch at input line 218
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
|diff -Naur orig/vmnet-only/driver.c new/vmnet-only/driver.c
|--- orig/vmnet-only/driver.c 2008-10-28 22:47:19.000000000 -0700
|+++ new/vmnet-only/driver.c 2009-01-20 04:49:44.000000000 -0700
File to patch:
Skip this patch? [y] y
Skipping patch.
1 out of 1 hunk ignored
can't find file to patch at input line 235
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
|diff -Naur orig/vmnet-only/netif.c new/vmnet-only/netif.c
|--- orig/vmnet-only/netif.c 2008-10-28 22:47:18.000000000 -0700
|+++ new/vmnet-only/netif.c 2009-01-20 04:49:44.000000000 -0700
File to patch:
Skip this patch? [y] y
Skipping patch.
4 out of 4 hunks ignored
can't find file to patch at input line 286
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
|diff -Naur orig/vsock-only/include/compat_wait.h new/vsock-only/include/compat_wait.h
|--- orig/vsock-only/include/compat_wait.h 2009-01-20 14:11:34.000000000 +0100
|+++ new/vsock-only/include/compat_wait.h 2009-01-20 14:51:05.000000000 +0100
File to patch:
Skip this patch? [y] y
Skipping patch.
1 out of 1 hunk ignored
thanks
felix

Similar Messages

  • I have installed CS5 on a macbook pro 10.9.4. I am unable to get the updater to run to update applications to most current version. It tells me there was an error trying to download the update and to try again later.

    I have installed CS5 on a macbook pro 10.9.4. I am unable to get the updater to run to update applications to most current version. It tells me there was an error trying to download the update and to try again later.

    Getting used to changes in the finder. I finally did see the Adobe Patch installer and am able to update applications individually. Should be able to attend to the main apps I use w/o further difficulty. Thnx for the help.

  • Errors trying to run the xws-security sample app

    Hi all,
    I'm geting errors trying to compile the xws-security sample app, does anyone have any advice? Thanks in advance!
    [kerzhner@kerzhner]~/jwsdp-1.5/xws-security/samples/simple% ant run-sample Buildfile: build.xml
    clean:
    [delete] Deleting directory /home/kerzhner/jwsdp-1.5/xws-security/samples/simple/build
    [delete] Deleting directory /home/kerzhner/jwsdp-1.5/xws-security/samples/simple/dist
    as8-check:
    ws-check:
    tc-check:
    [mkdir] Created dir: /home/kerzhner/jwsdp-1.5/xws-security/samples/simple/build/client/classes
    [mkdir] Created dir: /home/kerzhner/jwsdp-1.5/xws-security/samples/simple/build/server/WEB-INF/classes
    [mkdir] Created dir: /home/kerzhner/jwsdp-1.5/xws-security/samples/simple/dist
    compile-handler-code:
    [echo] Compiling the handler source code
    [javac] Compiling 1 source file to /home/kerzhner/jwsdp-1.5/xws-security/samples/simple/build/server/WEB-INF/classes
    [javac] /home/kerzhner/jwsdp-1.5/xws-security/samples/simple/src/com/sun/xml/wss/sample/SecurityEnvironmentHandler.java:0: error: malformed .zip archive in CLASSPATH: /home/kerzhner/jdk1.5.0_03/lib/tools.jar/
    [javac] /home/kerzhner/jwsdp-1.5/xws-security/samples/simple/src/com/sun/xml/wss/sample/SecurityEnvironmentHandler.java:25: error: Class or interface `java.security.cert.X509CertSelector' not found in import.
    [javac] import java.security.cert.X509CertSelector;
    [javac] ^
    [javac] /home/kerzhner/jwsdp-1.5/xws-security/samples/simple/src/com/sun/xml/wss/sample/SecurityEnvironmentHandler.java:535: error: Type `X509CertSelector' not found in the declaration of the local variable `certSelector'.
    [javac] X509CertSelector certSelector = new X509CertSelector();
    [javac] ^
    [javac] 2 errors
    BUILD FAILED
    file:/home/kerzhner/jwsdp-1.5/xws-security/samples/simple/build.xml:68: Compile failed; see the compiler error output for details.

    Resolved. It was a space issue. Deleted a couple of old apps and have now installed the Sample Websheet Application.

  • There was an error trying to get the status of the job. 1: The server returned an error processing CloseJob: Stack empty.

    Hi
    While trying to perform the operation 'Annul All Below' in DRM 11.1.2.1, I received the following error: There was an error trying to get the status of the job. 1: The server returned an error processing CloseJob: Stack empty.
    Has anyone seen this error before, and does anyone know what the fix is?
    Thanks,

    Just giving my view on this.
    When you try to restore a Version backup file, you get this error.
    This is a known defect.  The problem is caused by missing values in properties like AddedOn, AddedBy, which may occur when a version is copied with 'Clear Changed Properties' selected.
    this is a known bug
    but to workaround - Blend the affected version into a new, empty version, which will populate the 'ChangedOn' properties. You can then back up this version and it will restore.
    Thanks,
    ~KKT~

  • I tried to compile the SDL port, but i got an Undefined sym error again..

    I tried to compile the SDL port, but i got an Undefined sym
    error again, like in an other project yestarday.. Maybe the problem
    is not with alchemy but me? Any Tips?

    You just use FlashCS4?The first thing you need to check
    quote:
    Posted By: joesteele (Member)
    Alchemy is a technology preview and its features are not
    supported in the FlexBuilder or Flash authoring environments yet.
    This issue looks like it is caused by interaction between the Flash
    CS4 compilers optimization pass and Alchemy-specific bytecodes.
    Checking the "Export SWC" option skips this optimization pass and
    avoids the problem. Be aware that this issue impacts other tools
    which can generate SWCs containing Alchemy-specific bytecodes (e.g.
    Haxe).
    Describe the problem in more detail, you can copy and paste the
    error message directly as it is.

  • So im trying to compile the kernel......

    I'm trying to compile the kernel so i can use the ati drivers.
    i have the PKGBUILD.custom_kernel file in a /var/abs/local/kernal/.
    # Contributor: dibblethewrecker <dibblethewrecker.at.jiwe.org>
    pkgname=kernel26
    pkgver=2.6.11.10
    pkgrel=1
    pkgdesc="I likes the Chicken!"
    url="http://www.kernel.org"
    depends=('module-init-tools')
    install=kernel26.install
    ##### add any patch sources to this section
    source=(config ftp://ftp.kernel.org/pub/linux/kernel/v2.6/linux-$pkgver.tar.bz2 )
    # Function to grab var from src
    getvar() {
    old=$(cat Makefile | grep "^$1")
    echo $(echo ${old/"$1 ="/} | sed -e "s/[ ]*(.*)[ ]*/1/g")
    return 0
    build() {
    cd $startdir/src/linux-$pkgver
    ##### Uncomment and apply any patches here
    #patch -Np1 -i ../patchname || return 1
    # get rid of the 'i' in i686
    carch=`echo $CARCH | sed 's|i||'`
    cat ../config | sed "s|#CARCH#|$carch|g" >./.config
    ##### Load config - uncomment your preferred config method
    #yes "" | make config
    #make oldconfig || return 1
    #make menuconfig
    #make xconfig
    make gconfig
    ##### NO USER CHANGES BELOW HERE #####
    # save the current pkgname
    old_pkgname=$pkgname
    # set pkgname for build purposes - DO NOT alter!
    pkgname=kernel26
    # save the updated config to build with today's date
    cp ./.config $startdir/config-$(date +%b%d-%Hh)
    # get EXTRAVERSION from Makefile to create a unique pkgname and /usr/src directory
    _kernextra=$(getvar "EXTRAVERSION")
    # grab the 2.6.x.y version suffix from pkgver
    _y="`echo $pkgver | cut --delim "." --fields 4`"
    # remove .y version suffix from _kernextra
    _kernextra="`echo $_kernextra | sed "s|.$_y||g"`"
    # Read the full kernel version info from new config to use in pathnames and pkgname
    . ./.config
    # Kernel custom - to create a unique pkgname (see below)
    _kerncust="${_kernextra}${CONFIG_LOCALVERSION}"
    # Kernel release - will be the same as Makefile
    _kernrel="${pkgver}${_kerncust}"
    # Get the pkgver suffix for unique pkgname and /boot file suffices
    _pkgversuf="`echo $pkgver | sed "s|2.6.||g" | sed "s|.||g"`"
    # Set /boot file suffices from kernel release and pkgver suffix
    _kernboot="${_pkgversuf}${_kerncust}"
    # Set a new pkgname from kernel release and pkgver suffix
    pkgname="${pkgname}${_pkgversuf}${_kerncust}"
    # build!
    echo
    echo -n "Do you want to make clean (default YES)? (YES/NO): "
    read choice
    echo
    echo -n "Press any key to start make or CTRL+C to quit"
    read anykey
    if [ "${choice}" = "NO" ] ; then
    make bzImage modules || return 1
    else
    make clean bzImage modules || return 1
    fi
    mkdir -p $startdir/pkg/{lib/modules,boot}
    make INSTALL_MOD_PATH=$startdir/pkg modules_install || return 1
    cp System.map $startdir/pkg/boot/System.map26${_kernboot}
    cp arch/i386/boot/bzImage $startdir/pkg/boot/vmlinuz26${_kernboot}
    install -D -m644 Makefile
    $startdir/pkg/usr/src/linux-${_kernrel}/Makefile
    install -D -m644 .config
    $startdir/pkg/usr/src/linux-${_kernrel}/.config
    install -D -m644 .config $startdir/pkg/boot/kconfig26${_kernboot}
    mkdir -p $startdir/pkg/usr/src/linux-${_kernrel}/include
    mkdir -p $startdir/pkg/usr/src/linux-${_kernrel}/arch/i386/kernel
    for i in acpi asm-generic asm-i386 config linux math-emu net pcmcia scsi video; do
    cp -a include/$i $startdir/pkg/usr/src/linux-${_kernrel}/include/
    done
    # copy files necessary for later builds, like nvidia and vmware
    cp -a scripts $startdir/pkg/usr/src/linux-${_kernrel}
    mkdir -p $startdir/pkg/usr/src/linux-${_kernrel}/.tmp_versions
    cp arch/i386/Makefile $startdir/pkg/usr/src/linux-${_kernrel}/arch/i386/
    cp arch/i386/kernel/asm-offsets.s
    $startdir/pkg/usr/src/linux-${_kernrel}/arch/i386/kernel/
    # copy in Kconfig files
    for i in `find . -name "Kconfig*"`; do
    mkdir -p $startdir/pkg/usr/src/linux-${_kernrel}/`echo $i | sed 's|/Kconfig.*||'`
    cp $i $startdir/pkg/usr/src/linux-${_kernrel}/$i
    done
    cd $startdir/pkg/usr/src/linux-${_kernrel}/include && ln -s asm-i386 asm
    chown -R root.root $startdir/pkg/usr/src/linux-${_kernrel}
    cd $startdir/pkg/lib/modules/${_kernrel} &&
    (rm -f source build; ln -sf /usr/src/linux-${_kernrel} build)
    # Correct the pkgname in our PKGBUILD - this allows correct gensync operation
    # NOTE: pkgname variable must be declared with first 10 lines of PKGBUILD!
    cd $startdir
    sed -i "1,11 s|pkgname=$old_pkgname|pkgname=$pkgname|" ./PKGBUILD
    # vim:syntax=sh
    and when i try makepkg i get
    ==> Making package:   (Sun May 29 20:38:10 UTC 2005)
    ==> Checking Runtime Dependencies...
    ==> Checking Buildtime Dependencies...
    ==> Retrieving Sources...
    ==> Validating source files with MD5sums
    ==> Extracting Sources...
    ==> Removing existing pkg/ directory...
    ==> Starting build()...
    /usr/bin/makepkg: line 557: build: command not found
    ==> ERROR: Build Failed.  Aborting...

    i got it to compile and when i try to use pacman -U kernel261110-ARCH-2.6.11.10-1.pkg.tar.gz
    i got a bunch of errors like this
    kernel261110-ARCH: /usr/src/linux-2.6.11.10-ARCH/sound/usb/Kconfig: exists in filesystem
    and it dosent install

  • I have a problem syncing iCal on my Macbook air (10.7.5) and my iPhone 4s (5.1.1) over iCloud. The following server error message comes up "The request (CalDAVAccountRefreshQueueableOperation) for account "iCloud" failed." Been to Apple - no luck. Ideas?

    I have a problem syncing iCal on my Macbook air (10.7.5) and my iPhone 4s (5.1.1) over iCloud. The following server error message comes up "The request (CalDAVAccountRefreshQueueableOperation) for account “iCloud” failed." Been to Apple Store - no luck instore, or with Super genius over the phone when with genius in store, taking data in real time via ethernet!
    I had to do a full wipe of my system because of time machine back up issues 2 weeks ago, and the error has only occured at some point since then. I only did a drag and drop of my user account folders/files into an External HDD rather than a copy of my user account (advised by the staff in store at Apple to do this) and when reimported, the Mail folders are all present but each message is in a sub-sub-sub folder that is numerically named. I do not have a mirror image of the hard disk prior to the wipe, only a time machine back up from 2 weeks prior to it being done. I am uncertain if this reinstall has caused the issue. 
    I am not happy to upgrade the software in my iPhone until I have the calendars working. I have purchased Mountain Lion, but again am concerned about upgrading until the issues are sorted.
    I have tried the other solutions on here with no luck. HELP please.
    Many Thanks.

    Progress Update.
    I made a back of what existing phtos and Videos I had on my Iplhone.  I used Image capture to do this making an entire back up of photos and videoa that were still intact on the phone.
    Image capture is god for this purpose, as it does exactly what you ask it to do without applying any rules or squishing the files back into iphote (which might also be corupted) 
    Image capture wil do the basic function of retriving the contents of the phone and save them as native files on your hard drive.
    Once I did this I erased my iphone, and re intitialised it restoring an older back up from icloud.
    As the retore was happneing - I did retreive the missing files that cuased the intial beviour as above, and I could play the videos that were missing in the above scenerio.  The wierd ting was however that even though the source files were now back on the device, the thumbnail previews were missing. Where I ahd balck thumb nails for server portions of the resotred content.
    I then went to bed as the restore is a long process.  When I woke up the library had library had cleaned itself up.  Mysteriously the prcess had deleted the files missing the their thumbnails.
    This is very perculiar and bad behavior.
    I am now repeating the process, and will attempt to download the missing content as it is restored and prior to the phone trying to fix itself.
    Here are the lessons learned.
    DO NOT rely on Photo Stream to keep back ups and synchornise videos from you IOS device. IT DOES NOT SUPPORT THIS CAPBILITY
    DO NOT rely on iCloud Back Up alone - always fd an occassional iTunes back up or more reliably still always take a back up of photos and video files using Image Capture to be doubly sure that you a have backd up any content.
    DO THIS NOW - dont wait to loose your phone ofr have your phone repaired by replacement at the apple Store.  (I did both :-(

  • Server error trying to log onto icloud control panel from pc

    server error trying to log onto icloud control panel from pc

    In your Internet Explorer browser, Click on the "Pages" drop down, then on "Compatibility display" and add icloud.com to the list.
    Actually I had the same initial error this morning even after adding icloud.com to the list as explained yesterday. So I tried  restarting my browser and I was able to log in. I don't get it. Let me know if adding icloud.com to the list works out for you..

  • Errors occured when compile the bpel process

    Errors occurred when compile the bpel process using bpel designer for Eclipse:
    (com.oracle.bpel.designer_0.9.13)
    using PM: bpel_jboss_101200
    More error infomation following:
    Buildfile: E:\OraBpelDEclipse3.2\workspace\AboutTest\build.xml
    main:
    [bpelc] E:\OraBpelDEclipse3.2\workspace\AboutTest\temp\bpelc762.tmp\BPEL-INF\src\bpel\p0\BPEL_BIN.java:835: Invalid expression statement.
    [bpelc] retun true;
    [bpelc] ^
    [bpelc] E:\OraBpelDEclipse3.2\workspace\AboutTest\temp\bpelc762.tmp\BPEL-INF\src\bpel\p0\BPEL_BIN.java:835: ';' expected.
    [bpelc] retun true;
    [bpelc] ^
    [bpelc] E:\OraBpelDEclipse3.2\workspace\AboutTest\temp\bpelc762.tmp\BPEL-INF\src\bpel\p0\BPEL_BIN.java:208: Method setPartneLinkBinding(com.collaxa.cube.rm.suitcase.PartnerLinkBindingDescriptor) not found in class com.collaxa.cube.engine.types.bpel.CXPartnerLink.
    [bpelc] __pl.setPartneLinkBinding(getProcessDescriptor().getPartnerLinkBindings().getPartnerLinkBinding(__pl.getName()));
    [bpelc] ^
    [bpelc] E:\OraBpelDEclipse3.2\workspace\AboutTest\temp\bpelc762.tmp\BPEL-INF\src\bpel\p0\BPEL_BIN.java:584: Undefined variable: __ctx
    [bpelc] __setOutgoingLinks(__sc, __ctx);
    [bpelc] ^
    [bpelc] 4 errors
    BUILD FAILED
    E:\OraBpelDEclipse3.2\workspace\AboutTest\build.xml:28: ORABPEL-01005
    Error in java files auto-generated when compiling ,why?
    Thanks!

    when compiled again without any change, the same errors like above are not occurs
    more info.
    Buildfile: E:\OraBpelDEclipse3.2\workspace\AboutTest\build.xml
    main:
    BUILD SUCCESSFUL
    Total time: 9 seconds
    BUT, some errors occurs in BPEL PM server and in Console the process is not available
    more Info: Because I using Chinese version,some chinese Info occurs in the error infomation ,so i have translated some character into English.
    process "AboutTest" (version "1.0") compiled sucessfully
    15:49:15,718 INFO [STDOUT] <2007-05-11 15:49:15,718> <INFO> <default.collaxa.cu
    be.engine.deployment> process "AboutTest" (version "1.0") loaded sucessfully.
    16:25:25,265 INFO [STDOUT] <2007-05-11 16:25:25,250> <INFO> <default.collaxa.cu
    be.compiler> validating "E:\OraBPELPM\domains\default\tmp\.bpel_AboutTest_1.0.jar\
    AboutTest.bpel" ...
    16:25:35,015 INFO [STDOUT] E:\OraBPELPM\domains\default\tmp\.bpel_AboutTest_1.0
    .jar\BPEL-INF\src\bpel\p0\BPEL_BIN.java:835: Invalid expression statement.
    16:25:35,015 INFO [STDOUT] retun true;
    16:25:35,015 INFO [STDOUT] ^
    16:25:35,031 INFO [STDOUT] E:\OraBPELPM\domains\default\tmp\.bpel_AboutTest_1.0
    .jar\BPEL-INF\src\bpel\p0\BPEL_BIN.java:835: ';' expected.
    16:25:35,031 INFO [STDOUT] retun true;
    16:25:35,031 INFO [STDOUT] ^
    16:25:35,859 INFO [STDOUT] E:\OraBPELPM\domains\default\tmp\.bpel_AboutTest_1.0
    .jar\BPEL-INF\src\bpel\p0\BPEL_BIN.java:208: Method setPartneLinkBinding(com.col
    laxa.cube.rm.suitcase.PartnerLinkBindingDescriptor) not found in class com.colla
    xa.cube.engine.types.bpel.CXPartnerLink.
    16:25:35,859 INFO [STDOUT] __pl.setPartneLinkBinding(getProcessDescript
    or().getPartnerLinkBindings().getPartnerLinkBinding(__pl.getName()));
    16:25:35,859 INFO [STDOUT] ^
    16:25:35,859 INFO [STDOUT] E:\OraBPELPM\domains\default\tmp\.bpel_AboutTest_1.0
    .jar\BPEL-INF\src\bpel\p0\BPEL_BIN.java:584: Undefined variable: __ctx
    16:25:35,859 INFO [STDOUT] __setOutgoingLinks(__sc, __ctx);
    16:25:35,859 INFO [STDOUT] ^
    16:25:35,859 INFO [STDOUT] 4 errors
    16:25:36,343 INFO [STDOUT] <2007-05-11 16:25:36,312> <ERROR> <default.collaxa.c
    ube.engine.deployment> <CubeProcessFactory::generateProcessClass>
    process "AboutTest" (version "1.0") compiled failed.
    16:25:36,359 INFO [STDOUT] <2007-05-11 16:25:36,359> <ERROR> <default.collaxa.c
    ube.engine.deployment> <CubeProcessLoader::create> can not compile the class .
    can not compile the bpel class generated from "AboutTest".
    16:25:36,375 INFO [STDOUT] <2007-05-11 16:25:36,375> <ERROR> <default.collaxa.c
    ube.engine.deployment> process "AboutTest" (version "1.0") loaded failed!!
    16:25:37,281 INFO [STDOUT] <2007-05-11 16:25:37,265> <ERROR> <default.collaxa.c
    ube> <BaseCubeSessionBean::logError>
    if you have installed patched in server, please check whether the proriety "bpelcClasspath" contained the patch class.
    16:25:37,343 INFO [STDOUT] at com.collaxa.cube.engine.deployment.CubeProces
    sHolder.bind(CubeProcessHolder.java:1257)
    16:25:37,343 INFO [STDOUT] at com.collaxa.cube.engine.deployment.CubeProces
    sHolder.loadAndBind(CubeProcessHolder.java:870)
    16:25:37,421 INFO [STDOUT] at com.collaxa.cube.engine.deployment.CubeProces
    sHolder.loadArchive(CubeProcessHolder.java:812)
    16:25:37,421 INFO [STDOUT] at com.collaxa.cube.engine.CubeEngine.loadProces
    sArchive(CubeEngine.java:985)
    16:25:37,421 INFO [STDOUT] at com.collaxa.cube.ejb.impl.BPELDomainManagerBe
    an.loadProcessArchive(BPELDomainManagerBean.java:390)
    16:25:37,421 INFO [STDOUT] at sun.reflect.NativeMethodAccessorImpl.invoke0(
    Native Method)
    16:25:37,421 INFO [STDOUT] at sun.reflect.NativeMethodAccessorImpl.invoke(N
    ativeMethodAccessorImpl.java:39)
    16:25:37,421 INFO [STDOUT] at sun.reflect.DelegatingMethodAccessorImpl.invo
    ke(DelegatingMethodAccessorImpl.java:25)
    16:25:37,421 INFO [STDOUT] at java.lang.reflect.Method.invoke(Method.java:3
    24)
    16:25:37,421 INFO [STDOUT] at org.jboss.ejb.StatelessSessionContainer$Conta
    inerInterceptor.invoke(StatelessSessionContainer.java:683)
    16:25:37,421 INFO [STDOUT] at org.jboss.resource.connectionmanager.CachedCo
    nnectionInterceptor.invoke(CachedConnectionInterceptor.java:186)
    16:25:37,421 INFO [STDOUT] at org.jboss.ejb.plugins.StatelessSessionInstanc
    eInterceptor.invoke(StatelessSessionInstanceInterceptor.java:72)
    16:25:37,421 INFO [STDOUT] at org.jboss.ejb.plugins.AbstractTxInterceptor.i
    nvokeNext(AbstractTxInterceptor.java:84)
    16:25:37,421 INFO [STDOUT] at org.jboss.ejb.plugins.TxInterceptorCMT.runWit
    hTransactions(TxInterceptorCMT.java:282)
    16:25:37,421 INFO [STDOUT] at org.jboss.ejb.plugins.TxInterceptorCMT.invoke
    (TxInterceptorCMT.java:148)
    16:25:37,437 INFO [STDOUT] at org.jboss.ejb.plugins.SecurityInterceptor.inv
    oke(SecurityInterceptor.java:111)
    16:25:37,437 INFO [STDOUT] at org.jboss.ejb.plugins.LogInterceptor.invoke(L
    ogInterceptor.java:191)
    16:25:37,437 INFO [STDOUT] at org.jboss.ejb.plugins.ProxyFactoryFinderInter
    ceptor.invoke(ProxyFactoryFinderInterceptor.java:122)
    16:25:37,437 INFO [STDOUT] at org.jboss.ejb.StatelessSessionContainer.inter
    nalInvoke(StatelessSessionContainer.java:331)
    16:25:37,437 INFO [STDOUT] at org.jboss.ejb.Container.invoke(Container.java
    :709)
    16:25:37,437 INFO [STDOUT] at sun.reflect.GeneratedMethodAccessor81.invoke(
    Unknown Source)
    16:25:37,437 INFO [STDOUT] at sun.reflect.DelegatingMethodAccessorImpl.invo
    ke(DelegatingMethodAccessorImpl.java:25)
    16:25:37,437 INFO [STDOUT] at java.lang.reflect.Method.invoke(Method.java:3
    24)
    16:25:37,437 INFO [STDOUT] at org.jboss.mx.server.ReflectedDispatcher.dispa
    tch(ReflectedDispatcher.java:60)
    16:25:37,437 INFO [STDOUT] at org.jboss.mx.server.Invocation.dispatch(Invoc
    ation.java:62)
    16:25:37,437 INFO [STDOUT] at org.jboss.mx.server.Invocation.dispatch(Invoc
    ation.java:54)
    16:25:37,437 INFO [STDOUT] at org.jboss.mx.server.Invocation.invoke(Invocat
    ion.java:82)
    16:25:37,437 INFO [STDOUT] at org.jboss.mx.server.AbstractMBeanInvoker.invo
    ke(AbstractMBeanInvoker.java:197)
    16:25:37,453 INFO [STDOUT] at org.jboss.mx.server.MBeanServerImpl.invoke(MB
    eanServerImpl.java:473)
    16:25:37,453 INFO [STDOUT] at org.jboss.invocation.local.LocalInvoker.invok
    e(LocalInvoker.java:97)
    16:25:37,453 INFO [STDOUT] at org.jboss.invocation.InvokerInterceptor.invok
    e(InvokerInterceptor.java:90)
    16:25:37,453 INFO [STDOUT] at org.jboss.proxy.TransactionInterceptor.invoke
    (TransactionInterceptor.java:46)
    16:25:37,453 INFO [STDOUT] at org.jboss.proxy.SecurityInterceptor.invoke(Se
    curityInterceptor.java:55)
    16:25:37,453 INFO [STDOUT] at org.jboss.proxy.ejb.StatelessSessionIntercept
    or.invoke(StatelessSessionInterceptor.java:100)
    16:25:37,453 INFO [STDOUT] at org.jboss.proxy.ClientContainer.invoke(Client
    Container.java:85)
    16:25:37,453 INFO [STDOUT] at $Proxy146.loadProcessArchive(Unknown Source)
    16:25:37,453 INFO [STDOUT] at com.collaxa.cube.engine.deployment.CubeProces
    sMonitorWork.run(CubeProcessMonitorWork.java:129)
    16:25:37,453 INFO [STDOUT] at oracle.tip.adapter.fw.jca.work.WorkerJob.go(W
    orkerJob.java:51)
    16:25:37,453 INFO [STDOUT] at oracle.tip.adapter.fw.common.ThreadPool.run(T
    hreadPool.java:267)
    16:25:37,453 INFO [STDOUT] at java.lang.Thread.run(Thread.java:534)
    16:25:37,453 INFO [STDOUT] <2007-05-11 16:25:37,453> <ERROR> <default.collaxa.c
    ube.engine.deployment> <CubeProcessMonitorWork::run> Error while loading process
    archive E:\OraBPELPM\domains\default\deploy\bpel_AboutTest_1.0.jar
    why?
    thanks

  • Excel extractor produces error "Error 8 when compiling the upload program"

    I am trying to test a new Excel extractor I've created but when I do so I get the following error:
    RSAR233
    Error 8 when compiling the upload program: row 446, message: A newer version of data type /BIC/B0000788000 was
    I've tried reactivating transfer structures and transfer rules but with no success. When I activate the transfer structures I can see in the status bar briefly a message refering "Activating Structure /BIC/B0000788000". I am assuming it's the technical name of the structure which supports the extraction.
    Any ideas?
    Thanks for the help.

    OK, I can see your point. The Communication structure fields have data types, CHAR, CURR and DATS (those are the data types for the info-objects I am trying to load).
    But if I try to assign the same data types to the objects of the transfer structure which match the flat file I get errors like "Invalid data type (DATS) for source systems of type Ext. System.". What I understand this means is that I cannot use data types other than CHAR in the flat file structure so how can I assign data from a CHAR flat file to a DATS destination object? Do I need some kind of conversion? How? Do I really need a routine in the transfer rules?

  • File repository server error: failed to put the file to file server

    Hi,
    Am trying to export relational and OLAP universe to repository and getting an error.
    Am using Universe Design Tool and product version is  BI 4.0 SP 5
    When I create a universe and export it for the first time it get exported successfully.
    However I tried to export same universe after making few changes, getting below error
    File Repository Server error: Failed to put the file to fileserver: frs://<FRS Location>/Universe_Name.unv already exists
    Is anybody faced such issue?
    I suspect it is a configuration issue/product bug.
    Your thoughts are highly appreciated.
    Regards,
    Vinesh

    Hello Vinesh,
    There is a workaround mentioned in the following KBA:
    1309859 - Error: WIS 00501 Universe not found when viewing Documents
    Please have a look.
    Thanks and regards,
    Madhumitha

  • Errors trying to compile Orange [synce]

    checking for libole2-config... no
    checking for libole2 - version >= 0.2.4... no
    *** The libole2-config script installed by libole2 could not be found
    *** If libole2 was installed in PREFIX, make sure PREFIX/bin is in
    *** your path, or set the LIBOLE2_CONFIG environment variable to the
    *** full path to libole2-config.
    configure: error: Can't find libole2
    make: *** No targets specified and no makefile found. Stop.
    The above is an error recieved when trying to compile the orange code from the synce project. The libole2 is installed as version 2.2.8 and I have tried 0.2.4 just for reference and it makes no difference. It would seem that libole2-config is just not there. I'm not sure how to fix this error but would like it if someone else could give any advice..

    Well, I managed to get it to compile from CVS and it seems to run correctly. I may do a little bit more polishing and post the PKGBUILDs on the AUR.
    Note: Seems libole2 was replaced by libgsf in the newest CVS.

  • I am trying to update ITunes from 10.4 to 10.5 I have tried from both the program, and from a download on Apple's website. Regardless, I get the following error messages: (1) Installation package for iTunes cannot be found. Try installing to find the inst

    I am trying to update ITunes from 10.4 to 10.5 I have tried from both the program, and from a download on Apple's website. Regardless, I get the following error messages: (1) Installation package for iTunes cannot be found. Try installing to find the installation package 'iTunes.msi' in a folder from which you can install iTunes.  I can't find this folder. I have tried to completely unistall iTunes through the Control Panel, but it wouldn't let me: I tried going directly to the files themselves, but cannot uninstall. Any help would be greatly appreciated. System OS: Win XP SP 3.

    Set the permissions for Everyone in the folder in which CCPackager created, to "Read/Write" enabled. This is strange since there is only an administrator account on the Mac (and that account already has read/write), but it seems to resolve the issue.

  • ITunes Match has stopped uploading - every file errors and says waiting - I have tried to delete the files and use other formats etc.  I have had the service since Day 1 and NEVER had an issue.  It didn't start until the Delete from Cloud switch to Hide

    iTunes Match has stopped uploading - every file errors and says waiting - I have tried to delete the files and use other formats etc.  I have had the service since Day 1 and NEVER had an issue.  It didn't start until the Delete from Cloud switch to Hide from cloud - the files that do not upload show grayed out on my other devices.

    Have you confirmed that you successfull purged iTunes Match by also looking on an iOS device?  If so, keep in mind that Apple's servers may be experiencing a heavy load right now.  They just added about 19 countries to the service and I've read a few accounts this morning that suggests all's not running perfectly right now.

  • HT3743 my iphone 4 i bought was jailbroken to ios 6.0.1 redsn0w but i tried to restore the iphone and now it keeps saying connect to itunes but when i connect and try to restore an "unknown error" occurs and it will not boot up whatsoever. please help!

    my iphone 4 i bought was jailbroken to ios 6.0.1 redsn0w but i tried to restore the iphone and now it keeps saying connect to itunes but when i connect and try to restore an "unknown error" occurs and it will not boot up whatsoever. please help!

    If you want to solve your problems, unjailbreak. And don't do it again, because jailbreaking causes problems as you read about in that article. You can try Recovery Mode: http://support.apple.com/kb/HT1808

Maybe you are looking for

  • TS3716 ipod nano is not being recognized by iTunes.

    My ipod nano 2nd generation (and working perfectly) is not being recognized by iTunes. Any suggestions?

  • How to settle project costs to AUC

    Dear Experts, Please teach us how to settle project costs to AUC. Your response is very much appreciated.

  • How can I save a Printerconfig.

    Hi there ! I would like to save a printerconfiguration in order to load and use it instead of typing properties for the printer every time. I�m getting a PrintService from a PrintDialog, but PrintService is an Interface, so I do not get far with this

  • What plug-ns are compatible w/ Garage Band 3......

    hi guys heres a list of all the software plug-ins i want to use,but i'm not sure if they are compatible w/GarageBand 3,please help me to solve this issues A.S.A.P. IK Multimedia Total Workstation Bundle Native Instruments KOMPLETE 4 Bundle Spectrason

  • Should be an OSX 10.4 clasic forum

    I am surprised there isn't a classic forum for issue related to running Classic on OSX 10.4