Volume control bar

Have lost the volume control bar on a HP Touchsmart 610,Windows 7 OS. How do I get it back?

Hi
Please find the link given below might help you to resolve your issue.
http://social.technet.microsoft.com/Forums/en/w7itproinstall/thread/e49df7fc-1480-45a6-ba86-f25c2807...
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Similar Messages

Creating a Volume Control Bar for multiple audio files

I'm fairly new to Flash and am developing a project with a
series of frames that contain unique movie clips. Each of these
frames are accessible through a chapter based menu as well as being
viewable straight through as a regular movie. I've just added the
audio for each "chapter" / frame that are all unique from one
another. I'm having a problem with creating a volume control bar
that will affect all audio throughout all frames from the single
control bar on the general skin/interface that these chapters work
out of. (Using Flash 8)
I developed a sliding control bar, which works but does not
affect the volume in any way. Is there something wrong with the
following coding that I'm using? (The control bar is made up of a
button nested in a movie clip and the action is being applied to
the mc. The bar/line to follow is 60px long and the control is to
move horizontally while the increase corresponds to increase in
volume. The original code was for a 100px line from a macromedia
tutorial that I adjusted to be 60px) Any advice on best practice
for creating a volume control bar would be greatly appreciated! (I
currently have all of my corresponding audio files on separate
layers, should I be placing these within a mc rather than just
having them on the main timeline?) Thank You!!!!

Answering my own question.....
Each individual swf has the code...
var my_sound:Sound = new Sound();
my_sound.loadSound("someSound.mp3", true);
my_sound.setVolume(50);
Code on Shell/main slide....
//SOUND OBJECT
var soundtrack:Sound = new Sound;
soundtrack.setVolume(50);
//END OF SOUND OBJECT
//GLOBAL VOLUME CONTROL
var nVolCheck:Number;
volSlider.volBall.onPress = function():Void {
this.startDrag (false, 0, 0, 75, 0);
nVolCheck = setInterval(updateVolume, 150);
volSlider.volBall.onRelease = function():Void {
this.stopDrag ();
clearInterval(nVolCheck);
function updateVolume():Void {
var vol:Number = (volSlider.volBall._x)*2;
soundtrack.setVolume(vol);
//END OF GLOBAL VOLUME CONTROL
my bar is 75 pixels in width and the volume is being
increased by 1.5 at its maximum.

Lumia 920 volume control bar with extra icons

I am using Lumia 920. When I pressed volume key the volume control bar shows up but there are 3 extra icons play, fast fordward and backward
Does any one know what do those three buttons do? I have captured the screen.
Thanks
TBYU
Attachments:
volume_control_bar.jpg ‏169 KB

If those icons are an annoyance to you, you can install an app called Stop the music. Then after you have finished listening to your music you can use that app which will clear the music control icons from the volume bar.
http://www.windowsphone.com/en-gb/store/app/stop-the-music/0899997d-c25a-4075-9b28-685308e1568b
Ray.

3.1.3 upgrade no more volume control

Just upgraded OS on 1st gen touch and now there is no volume control bar. tried reinstalling 2 times with no result. anyone else have this problem or a solution?

I had the same problem. Had no problem prior to updating with 3.1.3.
I was finally able to restore my volumn (without having to use headphones/earbuds) by resetting the unit. Simply hold down the top button and menu button at the same time. It will shut the unit off. Then, hold them down again until you see the apple symbol. Wait a few moments and the unit comes back on. My volumn was then working again. Hope it works for you too.

Volume control disappearing

i have an ipod touch, i think second generation. it is running ios 3.1.2 and last year at the beach, some water got on the bottom part of it. since then, you can't hear music directly from it and you need to connect it to speakers or headphones. it has been working like this for almost a year now, but jsut today, i was connecting the headphones normally, then no sound was coming out of them and i found the volume control var missing. i tried to restart it, reset it, and nothing worked. now the only solution i have would be to restore. i dont' know whether to restore without backup? or to backup first and whether or not this will solve it. i also followed some threads and tried cleaning the connection area with a thin brush, but it didn't work. any solutions?

thank you for your response. i tried a step before teh restore and it worked there it is so that it might help anyone:
from settings, i pressed "reset all settings" without ereasing any content. and after this step, the volume control bar was abck to normal and i was hearing sound from teh headphones and from any speakers again

Set volume control

on my 1gb nano when i want to raise the volume control i get it to the place to set it,move the bar and hit the center button as instructed.some times it goes back to the previous window and sometimes it goes to the next window where you either set a code or just hit done.then it goes backto the window ahead of the one that the volume control bar is in.hit the button to go to the volume control to check it and its right back where it started.so how do i make it set?this is getting to be a pain.and it is updated with the latest up dates.

Hi,
Right click the speaker icon in the Taskbar and select 'Recording devices'. Left click the 'Internal Mic' once just to highlight it and then click the Properties button. The controls you require should be on the 'Levels' tab.
NOTE:
If you do not see the option as described above, try using Recovery Manager to reinstall your Audio Driver ( IDT, Connexant etc ) - the procedure for using recovery manager to reinstall Software and Drivers is detailed in the relevant document on the link below.
Recovery Manager - Windows 7
Recovery Manager - Windows Vista
After the reinstallation has completed, restart the notebook and check if the option is now available.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

I have lost sound on my iPad in apps unless I use headphones ,does anyone know how to get sound back without them .I have used the mute volume on the bar at bottom of screen and the slider volume control there only shows when headphones are plugged in !

I have lost sound on my iPad in apps unless I use headphones ,does anyone know how to get sound back without them .I have used the mute volume on the bar at bottom of screen and the slider volume control there only shows when headphones are plugged in !
I also tried resetting settings all to no avail ...I looked up some advice and watched utube video advice on how to fix without success..
The volume control button on side does not work ,I got the iPad last August and wonder if it is a fault that means I must return it for replacement from where it was purchased ?

The Retrospect you used way back when is no longer around. The company was sold and that company produced a new version of Retrospect - Retrospect 8.x
So, as you've been told, you would have to be running a Tiger system with an old version of Retrospect software (5.x or 6.x - you would need to know) assuming you can find the software.
As best I can remember you cannot extract files from a Retrospect backup except using the software since Retrospect did not normally make a file by file backup rather it created an archive of the files in the backup. I'm assuming that the EMC/Retrospect people have told you that old Retrospect backups are not accessible by Retrospect 8.x?

How do I get the ipod nano 7th generation to only show the album artwork? the volume control, info bar and album artwork shows whenever a song is playing.

How do I get the ipod nano 7th generation to only show the album artwork? the volume control, info bar and album artwork shows whenever a song is playing.

Hi TheGuru146,
It sounds like the iPod isn't restoring correctly. Try putting the it into Disk Mode manually and then restoring the iPod again as described in the article linked below.
Putting iPod into Disk Mode
http://support.apple.com/kb/ht1363
iPod nano (7th generation)
Before placing the iPod into Disk Mode, verify that it has a charge.
Reset the device by pressing the Sleep and Home buttons simultaneously until the display shows the Apple logo. This should take about eight seconds.
When the Apple logo appears, press and hold the Volume Down and Volume Up buttons simultaneously until the device enters Disk Mode.
-Jason

The volume control icon has disappered from the task bar.

A few days ago I turned on my pc and found the volume control icon that is normally showing on the bottom task bar, had dissappeared? I have explored every option (hidden icons etc.) but the icon does not exist anywhere. Can you help?
This question was solved.
View Solution.

Go to the link below.Enter your Product Number as listed on Service Tag attached to bottom of notebook (may be under battery). You can also get the Product Number by pressing Fn + Esc key. After entering PN, click Next ,then choose Software & Drivers.On the next page use the dropdown to select your OS (probably Windows 7 64bit). A list will populate with drivers. Download & Intall the latest Audio driver. Restart the laptop and check results.
http://h10025.www1.hp.com/ewfrf/wc/siteHome?cc=us&lc=en
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Lost my display tool bar, Volume control, Time, Bluetooth next to search

After power outage Lost my display tool bar, Volume control, Time, Bluetooth next to search at the top right. Help said to system pref. display and check box that says Show displays in menue bar. I can check it but it doesn.t display and teh check goes away

Hello... My first post hehe...
Well I had the same problem... and I found some files missing
Go to... /System/Library/CoreServices/Menu Extras/
(and look for clock.menu file, etc...)
I had a backup so I put back the missing files and I worked for me...

Dv7t-3300 volume control slider bar not working

I have a dv7t-3300 and all of a sudden the volume control slider has stopped working. It's stuck displaying mute although the computer itself does have sound. I tried performing a cold reset as some people on line have suggested to no avail. Is there any possible resetting that can fix it?

Hi gnobel,
Welcome to the HP Forums! I understand that your volume button is stuck and will not slide. I will try my best to help you with this issue. I suggest Performing a Hard Reset or Forced Reset on the Notebook. I also suggest Downloading or Updating Software and Drivers for HP Computers.
I hope this helps, let me know how it goes.
Thank you,
I worked on behalf of HP.

Audio volume control in quick start bar not working after last HP update

Volume keys at top work fine but clicking cursor on quick start icon for volume control does nothing now.

Hi ,
Thank you for visiting the HP Forums! A great place where you can find solutions for your issues with help from the community!
I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP ENVY 17 Notebook and issues with the Audio after Windows 10 update. Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that might need updating. Restart the Notebook after updates have been done. If your computer is having problems finding and installing operating system updates, try using the Windows Update Troubleshooting tool to fix the problem. Here is a document that shows how to update drivers that are not working correctly with Windows 10. I hope this helps you. Thanks.

I need help with voice memo and volume control

I really dislike to update my iphone's software. I have Iphone 4S and I have been using voice memo to record lectures for sometime.
It was working well till updated my Iphone's software (IOS or whatever that is). Now I can't transfer my voice memo to my computer
and I have tried so many things people have suggested online which are 1. restart my mac book, 2. turn off and on my Iphone 3.
check voice memo when syncing my iphone with macbook. It is not working. Also, I totally messed my volume control. I went to
Genuis bar and the lady who helped told me that my Iphone has some issues before which is making my Iphone go nuts.
In short, 1. I cannot sync my voicemail
2. my volume does not work....i have to turn it on and off

cancer833 wrote:
Genuis bar and the lady who helped told me that my Iphone has some issues before which is making my Iphone go nuts.
Did she tell you what these issues are?
Did she help you with these issues?
Did she tell you how to resolve these issues?
Go back and ask for further help.
In short, 1. I cannot sync my voicemail
Voice Mail or Voice Memos?

How do you increase the voicemail volume on an iPhone 4s ( Verizon ). The phone volume is fine. It is when I retrieve voicemails. Even the speakerphone is faint. I have adjusted the side volume buttons and the volume control in settings.What am I missing?

How do I increase the voicemail volume on an iPhone 4s ( Verizon )? The phone volume is fine. I have adjusted both side volume buttons as well as the volume control in settings.

Number one - that person has given you false information...the Apple store genius bar supports all Apple products whether in or out of warranty. Checking is free, service on an out of warranty item is not free.
Try a reboot by holding both the power and home buttons until the apple logo appears, ignore the red slider if that appears.
Since you show that you have iOS 7.0.3 you might want to update that iOS to 7.0.4...plug the iPhone in so you are on a solid power source, then while on a WiFi go to Settings > General > Software Update and update to 7.0.4.

Volume controls on my Apple BT Keyboard do not control volume on my Mac Mini

I just updated the OS on my Mac Mini to Yosemite and everything was working fine, but earlier today the volume control buttons on my Apple BT Keyboard stopped controlling the volume on my Mac Mini. I was watching a movie just last night and the keyboard controlled the volume just fine. So the keyboard WAS working fine for a few hours after I installed Yosemite.
When I press the volume buttons I get the screen display for sound and instead of the up and down volume that I usually get when repeatedly pressing the volume button I get a zero with a line through it. The same thing happens when I press the mute/unmute button so the computer is not muted. And it's not an issue with the F key settings in preferences because the volume buttons DO get a response and display on the screen, but the volume doesn't change and, as I said, instead of the up/down scale I get the zero with a line through it.
I can change the volume using the mouse and sliding the volume slider in ITunes up or down, but that's the only way. Also, strangely, the volume icon in the Apple bar at the top of my screen is grayed out. When I click on it, the slider shows volume all the way up and it's grayed out. And if I click and drag to try and change that slider, it doesn't respond.
Basically, it appears that the keyboard is, in some ways, not compatible with the computer. I'm typing with the keyboard now, and all the other buttons work except for the volume up/down/mute buttons. Even the change track, play/pause buttons work just fine. So it's not specific to the music controls. And again, I DO get that display for volume when I press volume up/down/mute with the zero and line through it.
I've owned Macs for over 10 years and this is the first time I've seen this. Very, very strange so any help possible is appreciated.

Try booting in Safe Mode
OS X: What is Safe Boot, Safe Mode?
Next, reset the SMC and NVRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
About NVRAM and PRAM

Volume control bar

Similar Messages

Maybe you are looking for