WAE FTP and offline Issue

Hello All,
I have really simple question for you.
1> So once the WAE devices are taken offline ( Disabling WCCP)
è WAN traffic will continue flow has normal. However the current connections will be lost. Am I right ?
è Also even thought we restart the WAE devices once they are offline it will not impact the current WAN traffic ?
2> So the other day I was trying to upload the 1.1.3b version to my WAE device which runs the CM ( Control Manager ) thru FTP however I got the time out error ( both thru the software and also thrui CLI ) here are the logs from the TFTP software. Also when i tried to upload the IOS image to the other WAE devices they had no issue.
Connection received from 172.30.209.220 on port 10003 [25/06 22:45:28.365]
Read request for file <WAAS_4.1.3b.9-K9.bin>. Mode octet [25/06 22:45:28.381]
Using local port 2404 [25/06 22:45:28.381]
TIMEOUT waiting for Ack block #65536 [25/06 22:46:18.797]
Connection received from 172.30.209.220 on port 10003 [25/06 22:51:15.020]
Read request for file <WAAS_4.1.3b.9-K9.bin>. Mode octet [25/06 22:51:15.020]
Using local port 2409 [25/06 22:51:15.020]
TIMEOUT waiting for Ack block #65536 [25/06 22:52:05.148]
Connection received from 172.30.209.220 on port 10003 [25/06 23:15:58.221]
Read request for file <WAAS-4.1.5f.2-K9.bin>. Mode octet [25/06 23:15:58.236]
Using local port 2437 [25/06 23:15:58.236]
TIMEOUT waiting for Ack block #65536 [25/06 23:16:48.737]
Connection received from 172.30.209.220 on port 10003 [25/06 23:27:57.961]
Read request for file <WAAS-4.1.5f.2-K9.bin>. Mode octet [25/06 23:27:57.977]
Using local port 2443 [25/06 23:27:57.977]
TIMEOUT waiting for Ack block #65536 [25/06 23:28:51.368]
Thank you for all the help in advance,
Soofi

Hi Soofi,
When you disable WCCP through the CLI, there is a graceful shut down period during which existing connections will continue to be handled by WAAS while new connections will be returned to the intercepting device for normal forwarding. Once the graceful shutdown period as expired, optimized connections will be reset while pass-through connections will continue to flow normally. Once you re-enable WCCP, existing connections will be handled as pass-through, while new connections will be optimized.
For the upgrade problem you are having, how are you trying to copying the image to the CM? Can you please provide the exact steps you are taking?
Thanks,
Zach

Similar Messages

FTP - How to be accessed by external internet and some issues

Hi there everyone!
I am looking foward to set up an FTP server on my Mac Pro. It's purposed for my digital photos I take of much of my friends, and personally don't like websites for such hosting. (Yes, copy pasting into a folder is so lazy )
So starting the FTP was indeed easy. Thanks to Mac OS X technologies. (And Apple too)
But I've tried connecting to my own FTP, and wasen't sure how to do it exactly.
It appears I just can't browse it like a normal web page (through FireFox and Safari), so I though of connecting with the Finder, but it showed me this error:
(It asked for my username and password, which I didn't knew, so simply hit enter, then showed me:)
The Finder cannot complete the operation because some data in "ftp://127.0.0.1" could not be read or written.
(Firefox returned me an error: "503 User anonymous unknown" and safari... well went opening that very same page inside firefox!)
Searching within the help, I couldn't find my answer and came here.
Also, I was wondering which folder was acting as the ftp folder? And were can I setup this?
I have also these basic problem with Personal Web Sharing (which could be useful for my project) but that's something different.
I understand I am asking quite much stuff here, but my search on the internet did not answered me. If you have any article that could be useful, I'd thank you if you could drop a line or two! Thanks in advance for help!

I have maybe found a way to setup some sort of FTP account, since I think it works with user accounts on the same computer (right?).
Could anyone have a quick glimpse a this tutorial page and tell me if that's the good way to setup an ftp account?
In my case I'll need 2 accounts, one which people will read from, and another they will be able to write on. I'll use these two accounts with people I know and that asked my access to my pictures.
Thanks again in advance for help!

Windows 8.1: Printer Offline Issue

Windows 8.1: Printer Offline Issue
If you have seen issues where your laptops/tablets has been taken from a private (home) network to a public network and then not been able to print when returning back to your private (home) network. This is most likely due to the public network settings not being reset back to the private (home) network settings. If this sounds like an issue you are having- try resetting your network settings by following the steps in the documents linked here:
For Ink Printers, please visit this document to help resolve your issue:
Print Jobs are Stuck in Queue
For LaserJets, please visit this document to help resolve your issue:
HP Laserjet - Printer offline and unable to print on a network in Windows 8.1
Install this Microsoft patch to make sure this private-public-private network issue does not reoccur. It is part of the April 2014 Windows Update package for Windows 8.1 and Server2012 R2 (http://support.microsoft.com/kb/2919355).
If you experience this issue before you apply the patch, you must manually reset your network settings for this patch to function. Please refer to the above documents for manual reset help.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

Hello All,
The printer goes offline due to proper driver is not installed correctly or if the printer port is not selected correctly.
I would suggest that you check the printer port (if the printer is connected via USB then chck if you have selected USB001,002... OR DOT), if the printer is connected via Network then check if the printer is selected via TCP/IP and then check the results.
Alternatively, you may uninstall and reinstall the driver and then check the results.
Regards,
HP Laserjet team

2540 2nd controller offline issue

I see some others had the same issue but I don't see the solution.
The array is new. It has 2 controller boards and 12 disks. When the array is powered on controller B fails to configure. It looks like it is powering up but then the service light comes on and the ether port shuts down. If I remove controller A and insert controller B in its place it powers up but CAM can't find it and the serial service port is for the most part dead(set baud rate only).
Now if I remove all the disks and have controller B present the controller appears to be happy and is able to communicate with CAM. Now if I power off with B in A's slot and insert controller A into B's slot still with all the disks removed, at power on controller B offlines itself. I have tested this with another controller and the same thing happens.
It appears original controller A always captures the primary role and offlines the other controller regardless of the slot placement.

-------ISSUE RESOLVED-------
This happens to be a configuration within the array. As it turned out SUN ships arrays as a single controller configuration or a dual controller configuration. If an array is ordered as a single config the array is preset to ignore the second controller. In my case the vendor sent us a single array configuration and a second controller to be installed.
To gain access to the second controller the array needs to be placed in a duplex controller setting. This can be done using the "SEVICE ADVISOR" of the CAM software. There is a section in the advisor for "X-Options" and in this section there is a topic of "Converting a Simplex Tray to a Duplex Tray". It will walk through the configuration change.
How stupid

Using both power saving mode and offline mode caus...

So I am having a very strange problem. I have been using the Situations App (formerly Nokia Situations) to automatically put my phone into offline mode, and power saving mode over night. 9pm to 6:30am.
Recently the phone as started refusing to leave the offline mode in the morning. Even if I try to change the profile manually it says "Unable to change profile". The only way I can get out of offline mode is to reboot.
I uninstalled Situations, and manually put the phone into offline mode and power saving mode. By the morning I had the same issue, stuck in offline mode until reboot. So it's not the App causing the problem. I've tried a soft reset, same problem still.
I also noticed that over-night (from fully charged before 9pm) to 6:30am I used about 70% of my charge. (A combination of power saving mode and offline mode is killing my battery!)
I would have to go to work and immediately put my phone on charge! I.e.. 12 hours of offline + power save has drained my battery almost completely.
Last night I decided to use the Situations App to put the phone into offline mode, BUT NOT activate power save mode.
This morning the phone had virtually full charge and it had no problem returning to online mode. So it's ONLY if I use BOTH power-save and offline. (Tonight I will try using power-saving mode and NOT offline mode to see if it's only the power-saving mode causing the issue!)
If I manually enter offline+power-save mode, and then try to return to on-line/non-power-save mode, relatively quickly, i.e.. Not over-night, everything is fine. It's only over night the problems start!
Any help?
Rob
PS. I also have the problem where using HSPA+ causes my phone to drop from the network and stop being able to receive/make phone calls. But disabling HSPA+ works around this for now, I think this problem is unrelated however.

I have a similar problem. My 808 PureView loses 70% of its charge overnight if I leave it in normal profile without power-saving. To deal with this issue, I started using the situations app to put the phone in power saving mode overnight. That solved the problem (although I never put my phone to offline mode). This is a weird problem because throughout the day my phone doesn't use 70% of charge, but it does overnight while doing nothing!
I have also experienced the second problem, losing cellular and internet connection, on my 808. I have started a thread to deal with this issue.
http://discussions.nokia.com/t5/Nseries-and-Symbian-Smartphones/Nokia-808-PureView-loses-cellular-an...
I believe it is a firmware bug that causes this problem.

HT1976 im trying to locate my i phone and having issues could you please help?

I believe my i phone was stolen along with my purse im trtying to track it and having issues could someone please assist me in locating it thank you.

What would the issue be? Does it say your phone is offline? IF so that means your phone is powered off.
Your phone would need to powered on and connected to internet in order for find my iphone to work.

Printer offline issues

Hi all,
3.4 GHz iMac running 10.6.8. Software update current.
Epson NX430 (new) connected via wifi. All installation, including downloading the current drivers from Epson, went smoothly. Printing and scanning wirelessly does indeed work. But...
After a while, the printer, or the Mac printing system, sends the printer "offline." When I send a document to the printer, I get a warning icon from the print monitor, and the NX430 print monitor window says "Looking for printer.... printer offline."
The quick fix for this is to power cycle the printer (obviously a pain). Interestingly, this was the same issue I had with the HP Photosmart 4400 device that the Epson replaced. That HP printer was hooked up via USB, but didn't scan except to PCs, so the switch was to fix that and hopefully also fix the printer offline issue at the same time. But this experience leads me to think that the problem is with the OS, and not the printer.
Other things I have tried: Restarting the iMac. Deleting and re-adding printer. Resetting the printing system (this worked for a few days, I think, although it is hard to be sure of cause and effect). Checking the network connections -- printer and gateway IP addresses are correct, and even when getting the printer offline message, I can successfully ping the printer.
One more thing. When the system is in this "printer offline" state, trying to activate either the printer utility, or check supply levels, results in an error message, even though I have verified network connectivity with a ping test.
Any ideas?
Thanks,
Dave

alicedave wrote:
Checking the network connections -- printer and gateway IP addresses are correct, and even when getting the printer offline message, I can successfully ping the printer.
One more thing. When the system is in this "printer offline" state, trying to activate either the printer utility, or check supply levels, results in an error message, even though I have verified network connectivity with a ping test.
With the ping getting a response from the printer it would suggest that the symptom is not network related but more to do with the supporting software, or more so with the protocols it uses to communicate with the printer. I would guess that the printer supports Bonjour and you would have added the printer by opening the Default Add Printer view and selecting the printer that was shown in this view. If this was the case then a suggestion would be to look at using an alternate protocol for the print queue, providing the printer does support such an option. If you can check the network settings for the printer there may be the option to use/enable print protocols such as LPR. With this active, the printer can be added using IP > LPD. This requires you to enter the IP address of the printer and then browse for the printer driver.
If such an option to use an alternate print protocol does not exist then something else you can test when the printer goes offline is the scanning. Does this also fail?
And can you confirm? You said you had to power cycle the HP to get it working again. Do you have to do the same with the Epson to get it printing again?

CS6, FTP and MySQL Connection ERRORs

Adobe CS6 Dreamweaver
I have the latest + updates of CS6 for Mac OS X 10.7.4.latest
I can FTP, but files are not readable after the upload, on any web hosting provider.
I have to use a thrid party FTP application (CyberDuck or Trnsmit) to make this happen.
NOT HAPPY about this £2500 CS6 Master Collection spend not working !!!!
When I try to connect via MySQL I get this error and failed actions:
https://dl.dropbox.com/u/5485939/adobe_CS6_dreamweaver_FTP_MySQL/Screen%20Shot%202012-07-1 3%20at%2011.11.57.png
https://dl.dropbox.com/u/5485939/adobe_CS6_dreamweaver_FTP_MySQL/Screen%20Shot%202012-07-1 3%20at%2011.11.45.png
https://dl.dropbox.com/u/5485939/adobe_CS6_dreamweaver_FTP_MySQL/Screen%20Shot%202012-07-1 3%20at%2011.11.19.png
I have checked the folders & content for ...
_mmServerScripts
Connections
are uploaded properly (having to use a third party FTP application, see above).
I have the correct logins details for FTP and MySQL, as other MySQL Apps (Sequel Pro) have no problem connecting to any web hosting proivdier for MySQL using the exact same login details.
This is the same on my iMac or my MacBook Pro.

Hello David, I am having this issue getting errors while trying to get my SQL to connect with the server. I clicked on the link you provided and I get a "you do not have permission to view this" message. Can you please share what ever solution that adobe has with me too.
I am really really irritated with this issue, as someone else stated this is really inconvenient when I want to get some work done. I am also upset that I bought this software, especially if I cant find a solution.

Dreamweaver to CFB (FTP and other gripes)

I 'get' the potential benefits of moving to CFB from Dreamweaver. I have watched all the videos and read the manual and I love the integration with Flex.
BUT
It appears very little thought has been put into the FTP and synchronisation tools..
Ideally:
I would like to set the destination FTP address for each project (at the moment although it asks me from the subdirectory, it shows me the top level root and I have to drill down each time for the destination where I want to upload)
I don't want to see nor have editing capabilities on my remote files by default.
Accidents happen and I'd rather they happened locally.
Accidentally deleting a directory remotely could be disastrous.
When the FTP client is busy, the rest of the IDE goes to sleep. Dreamweaver sorted this out two versions ago.
There appears no way to stop the interaction with the remote server.
So until all these (pretty fundamental) issues get sorted. I ill probably use FB to play with CF9 and jump back to Dreamweaver to use their robust FTP tools. (which just leaves me with the version control issues now that I have to put my FB source files into the wwwroot of my local server). Again a real pain !
Has anyone else found these problems - or worked out how to get around them ?
R8_UK

R8_UK, I hear your concerns, and they're rather common. I hope I can address
(and resolve) some of them here for you.
First, I use the FTP feature all the time and it never makes the IDE
"sleep". You may want to turn on the progress view (window>show
view>other>general>progress). It will tell you what's happening as FTP
processes are running. It will also tell you other processes going on in the
editor. You may be surprised to find something else causing the "sleeps" you
sense.
As for you saying that "it shows me the top level root and I have to drill
down each time for the destination where I want to upload", again I don't
have that problem. Are sure you didn't just make a mistake in setting up the
FTP connection? Admittedly, changing them is tough. You have to go to the
File view, and there you'll see what FTP (or FTPS or SFTP) connections
you've made.
Or do you mean that you ARE using the File view, and it's when you open that
that it makes you drill down? Well, you don't need to do that. You can
instead connect your project to an FTP connection (either in the project
properties and its synchronization section, or by just right-clicking
anywhere in the project and choose Synchronize>Create New Synchronize
Connection).
If you do that, then it also solves a common complaint I hear from some,
that it's complicated to do an FTP upload in CFBuilder. Well, I just right
click on the file (or on the editor workspace to upload the file I'm working
on, such as after changing and testing it locally), then choose
Synchronize>Upload. Bang, done.
There is also a more evolved "synchronize" feature that lets you do more
(including comparing the contents of a file locally to remote, which comes
in really handy). There's an even still more evolved interface in
Window>Show View>Other>HTML Standard Views>Sync Explorer. The latter two
come closer to the kind of two-paned interface for managing local/remote
files that some expected in DW.
Of course, different people have different desires for FTP access. You have
said you do NOT want to edit the file directly on the remote server. I hope
what I share above helps you. But those who DO like editing on the remote
server (indeed, at their peril) will groan that they wish they didn't have
to do even that simple manual effort to upload: they wish that on save it
would upload. I don't know if we can ever expect that from within a local
project in Eclipse. It just goes against the grain of better development
practices, and it's one area where perhaps it's a good thing if the IDE
pushes one to reconsider that.
Until then, though, they can indeed use the File view, which does provide
direct access to a remote server and its files. With that, you do open the
remote file in the IDE and when you save it, it's pushed immediately to the
server.
Hope some of this helps you (and others) with your consternation with CFB
and FTP. Come on in, the water's fine. (But I'll grant that's a relative
statement. If you're still not sold, keep pointing out your concerns.)
/charlie

FTP website deployment issues

Hae there guys,
I have this issue on azure deployment, i have my credentials but i dont seem to be able to log into my ftp server and enter the files.
When i use filezilla it says that my password is wrong and am sure its not.
Anybody help .....

Hi,
I hope this article could give you some tips (http://blogs.msdn.com/b/kaushal/archive/2014/08/02/microsoft-azure-web-site-connect-to-your-site-via-ftp-and-upload-download-files.aspx),
this article shows the details on how to use filezilla to connect azure website.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Muse can't validate my domain name, FTP and folder....? when I try to upload it to Host FTP

When I try to publish my additions in Muse, an error message tells me that it can't validate my domain, FTP and server folder. Has anyone had this problem?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Failed Hardware Scan and other issues E440

Hi all,
This is probably more rant than anything, but I wanted to give a heads up to others too.
I have a ThinkPad E440 that is a year old. From the very first time I turned it on, there have been issues. The first hardware scan (via Lenovo Solution Center - LSC) showed a warning for the Intel Dual Band Wireless-AC 7260 Local Connection Test. There were also tons of System Events that always show up in the "Configuration History" part of the LSC. You can look at the calendar and tell exactly which days I used the computer because there will be System Events generated each day. Things like app crashes and failed drivers.
In July 2014, I got the first warning for the 16 GB SSD - the SMART Short Self-Test. By February this year it showed as failed for each hardware scan (these were initially set up to run monthly).
Also the whole time I've had it the touch screen would just stop working at some point and I would have to reboot to get it working again.
I finally called Lenovo on March 30th, before my warranty expired. When I called that time, I didn't realize the hard drive failure was the SSD. So they sent me a new 500 GB drive. I also added the other things into the case when I talked to them. For the wireless issue they suggested making sure the driver was up to date. I did this and let them know when I called back that it was up to date and still having the warning. So I called them to tell them to tell them about the wireless and also that I realized it was the SSD having the failure, not the main drive. The first case had already been closed even though none of the other items were addressed.
So they opened another case (this is #2). They said to mail them the laptop since the wireless issue would probably be on the board and it wasn't something I could fix myself. They sent a box with a prepaid overnight shipping label. I was very sick for a few days so I sent it back to them on April 10th (a Friday). Via UPS I saw it was delivered on Saturday. Work was performed on it Monday, April 13th and sent back to me that very day. I received it on April 14th. This part of the service has been excellent - very fast response.
Being in IT, I included a letter with the laptop that outlined the issues that should have been in the case. I also printed the hardware scans and what the system events looked like.
When I got the laptop back, the sheet inside said they had replaced the Speaker because of Distorted Sound. This was not even on the list even though I had noticed it. I didn't even power up the laptop before calling them again - yes, I was furious! Plus our power was out...
So this was noon on the 14th. They opened case #3 and sent me ANOTHER BOX so I could send it back.
After our power came back on the 15th, I powered up my laptop. I opened the browser (I have it set to restore the previous session) and there was a sexually explicit video on YouTube. I opened the other browser and there was a different video on YouTube. So this person was watching YouTube instead of fixing my laptop. I looked through both browser histories and there was quite a bit of activity while my laptop was at the repair center... I ran the hardware scan - still failed and a warning for the wireless. They really hadn't done anything.
I also found two pictures of the repair person in the recycle bin...
So I called back. I was LIVID! They opened another case (this is #4). And sent me ANOTHER BOX. I finally learned the other day that once a case is opened, it cannot be edited or added to at all. Instead, they close the other case and open a new one. I guess their turnaround time for closing cases is excellent! I've never seen a system like that - and I've used a lot of them.
I got a really nice, patient fellow on the line. He took all my info (again). I emailed him the pictures, screen captures of the YouTube videos, the letter I had sent - everything. He entered as much into the new case as he could - he talked to one of the supervisors to make sure he did it right. Somehow he flagged it so that the laptop would get more attention (time) at the repair facility. He also opened a separate case (an escalation ticket?) for a supervisor to call me regarding the person's conduct at the repair facility. He said they would call me that day. (It's now the 25th and I've never heard from anyone)
So, he sent me ANOTHER BOX. I've built up quite a stack of them.
Our power was out AGAIN from the 17th through the 19th (don't get me started).
I noticed a hardware scan had now gotten a failure on the main hard drive. So I called them on the 21st to add this to the case before sending the laptop back. The girl said they can't add anything to an existing case or edit it at all once it's opened. She would have to open a new case and SEND ME ANOTHER BOX. I told her to forget it because I was ready to send it in and didn't want to wait for another box. I also asked for a status on that "escalation case" where the supervisor was supposed to call me. In order to do this she, yes, wait for it, had to open ANOTHER CASE!! So they would know I wanted a status. I'm completely dumbfounded.
So I sent it back on the 21st. This time I practically wiped it. I had already removed all my files the last time, but I had left my bookmarks and browser history intact. I set up a guest logon with admin privileges. I updated my letter and printed off more stuff to include with the box. On one sheet I had only the case number, the serial number and machine type. On another sheet I had "DO NOT SEPARATE THIS PAPERWORK FROM THE LAPTOP" and the case number. I put this sheet on top (The guy on the 15th said my letter and stuff may have gotten separated from the laptop once it was delivered to the repair facility). I used a ton of staples so it would all stay together. I included in my letter the failure on the main hard drive and asked if they could look at it. I wrote about having to open a new case if I wanted to include it.
They received it on the 22nd. A nice gentleman from the repair facility called me that day asking about the password. that. was. written. on the sheet they have you fill out. I told him what happened last time and also mentioned the hard drive failure and asked if he could look into it. He said they would.
I received my laptop back yesterday morning.The sheet that came with it said they had "replaced the following parts to complete the repair of your laptop."
Part Description                                           Symptom
IMAGE                                                             Replaced due to engineering change
System board                                                 Network card error
Hard disk drive                                                Network card error
ECA-WIRELESS                                            <no symptom listed>
There was also a sheet saying they had installed a factory preload of software and I needed to install Lenovo and Windows updates.
When I booted it up, the first thing I noticed, in the lower right corner was:
Windows 8.1
SecureBoot isn’t configured correctly
Build 9600
I ran a hardware scan. Well, I tried. It stopped part way through and said it finished successfully but most of the tasks showed up as cancelled. I tried to run it again - issues - rebooting ensued. It said the LSC wasn’t available and that I should try again or reboot.
Tried several times. Then got what I guess is the new BSOD - kinder, gentler:
Your PC ran into a problem and needs to restart. We're just
collecting some error info, and then we'll restart for you. (xx% complete)
If you'd like to know more, you can search online later for this error: DRIVER_CORRUPTED_EXPOOL
Even though the LSC said my Lenovo files were all up to date, I ran the Update. And first I had to download a new version of Update. Then I downloaded all of the Lenovo updates and installed them (there were quite a few). The BIOS update failed. While I was doing the Lenovo downloads, I got a light blue screen but no text (I was out of the room so I'm not sure what happened). Did CTRL-ALT-DEL and it shows only IE and Task Manager as applications that are running. Could not “Switch to” IE. Hitting window key to go to start didn't do anything. So I had to restart.
By 3pm yesterday there were 34 system events in the configuration history.
I ran the hardware scan again after I updated the Lenovo files, and you guessed it! Failure on the SSD (SMART Short Self-Test) and warning on the wireless. Nothing had changed. Except hardware scan is acting different than it did before I sent in the laptop for repairs. When it finishes, it instantly closes and just shows 100% complete. When I click on "see last results" it shows a screen called
Log Information,
Canceled 04/24/2015 n:nn pm
You have not done a hardware test on your computer
And the calendar in LSC only shows the very first hardware scan I did on Friday. Even the hardware scan screen shows the date and time of the last scan. It also shows the error code. In order to see exactly what is failing, I have to sit there and watch it very closely and snap a picture of the screen as soon as the error (or warning) shows up.
When I would try to run Windows update, it would hang up PC Settings. I couldn't even kill it using task manager because it didn't show up as a task. During this, I got a flag saying the firewall wasn't turned on. I tried to turn it on, but clicking on Turn on Windows Firewall didn't do anything. I tried to setup my Microsoft account but that just hung too.
I ended up running Windows Update FOUR TIMES to get all the updates installed. Every time I ran it, it said "Done!" and I would run it again and more would show up. The last time was this morning.
At some point, the error about SecureBoot went away.
Then, I created a bootable BIOS update disk. Following the ReadMe instructions, I went through ThinkPad Setup and verified several values. Of note:
Secure Boot was DISABLED. According to the ReadMe file, this should be ENABLED in Windows 8.1. I enabled it.
Under Startup/Boot, according to the ReadMe that came with the BIOS update, UEFI/Legacy Boot is supposed to be set at UEFI Only for Windows 8.1. Mine was set to "Both". I changed it.
In Startup, OS Optimized Defaults was DISABLED, even though it says right there (and in the BIOS update ReadMe) it should be ENABLED to meet Microsoft Windows 8 Certification Requirement.
After these updates, I flashed the new BIOS.
Then, I ran hardware scan again...
Now I have TWO failures on the SSD: Random Seek Test and SMART Short Self-Test. Great.
In the Event Viewer (that I recently discovered), it says my disk has a bad block. It just says The device, \Device\Harddisk\DR1, has a bad block. I assume this is the SSD...
There are 867 events in the event viewer - Critical, Error, and Warning...
Fifty-two of these are from October 7, 2013 - before my little laptop was a glimmer.
The rest are from when Lenovo had it and yesterday and today.
64 of them are the disk error.
341 are from DeviceSetupManager. 65 of those are from failed driver installs. 69 are for not being able to establish a connection to the windows update service. 64 are from not being able to establish a connection to the Windows Metadata and Internet Services (WMIS).
3 times it's rebooted without cleanly shutting down
60 of them are from Service Control Manager and say The TDKLIB service failed to start due to the following error: The system cannot find the file specified.
One of them says {Registry Hive Recovered} Registry hive (file): '\??\C:\Users\Default\NTUSER.DAT' was corrupted and it has been recovered. Some data might have been lost.
16 are warnings that various processors in Group 0 are being limited by system firmware.
12 say the certificate for local system with thumbprint <bunch of hex numbers> is about to expire or already expired.
108 are warnings for failure to load the driver \Driver\WUDFRd for various devices
16 are application errors
One is for the computer rebooting from a "bug check"
15 are for name resolutions timing out after none of the configured DNS servers responded.
10 are for SecureBoot being disabled.
14 for services terminating unexpectedly
15 are for WLAN Extensibility Module has stopped
61 are for applications not being able to be restarted because the application SID does not match Conductor SID
12 are for activation of CLSID timing out waiting for the service wuauserv to stop
So, I'll call them on Monday and open. a. new. case (#5?) - but really 7. And get A NEW BOX.
I'll keep you updated!

Hi amycdero and welcome to the HP Forum,
I understand that you are having scanning and printing issues after upgrading to Mavericks OS X v10.9.1. I will try my best to help you resolve this issue.
In this document for Mac OS X: Scanning Software Does Not Open or Stops Responding are steps the may help you with your scanning issue.
This document for Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems should help with the streaking printing issue.
I hope this information is helpful. Please let me know.
Thank you,
I worked on behalf of HP.

Battery, heat, and ringer issues

I recently purchased the Iphone 4s.. this is my first iphone
I did the update that Apple sent out to help the battery and it seems like it worse then before the update?? My phone has been off the charger for 45 minutes, I sent 1 text message, and had 1 phone call. The percentage is now at 87. It the last 2 minutes i have watched it go down 2%? Is this normal? Also, the phone gets REALLY hot...
If not, what do I do now??
Also, I keep missing phone calls because I don't hear the phone ring... but the ringer is all the way up..
Any help will be greatly appreciated!!

mdorling wrote:
We've got the same issues, the BBM contacts went, now the BB won't charge ... we've tried all ways to get it to charge ... typically it's just over a month old so we can't get a full refund ... we are on here trying to find out what we need to do as we can't obtain a telephone number for BB customer services nor an email address only a tweet address which I haven't downloaded onto my handset. So am stuck!!! Any and all advice very gratefully received as seriously peeved with BB models now. My first BB was fantastic ... but all newer models have had problems ... think BB needs to ensure that all techy problems are fully ironed out prior to launching their new BB handset!
1. Connect your Z10 to the wall outlet charger for an hour and then with the Z10 powered on, and with it STILL CONNECTED, remove the battery for a minute and replace. This will normally reset the the on-device battery meter and allow the charging status and percentage to show more correctly.
2. Orange is your tech support contact and any issue which they cannot resolve, they should escalate up to BlackBerry tier two tech support, or you should ask/demand that.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

New Airport Extreme and iPhone Issues

I've had the networking day from ****. I previously had a 3rd Gen Time Capsule at our restaurant, connected to a Cisco 26port gigabit POE switch and Comcast digital voice and internet. Over the past few days, employees have reported trouble accessing the the Wifi network. After several restarts and firmware upgrades (including the dreaded "firmware problem" to fine update), nothing worked. I changed channels, back to auto, back to specific channels, back to auto. Made open guest networks. Nothing worked consistently. My iPhone might connect and my friend's might not. Nor his laptop consistently. Our Axis network cameras might take a bit extra time to connect. All quite random and quite frustrating.
So I swap out an older Airport Extreme (4th gen I believe) using the same configuration as the TC (Time Capsule). It works fine, except for the last port not working as expected. No matter, I plug the mac mini into the Cisco switch and off we go. Nevertheless, I'm still told we are suffering random Wifi issues. So I buy a brand new AE (5th gen) today to replace that one. Should work like a charm I thought. Right....
Several hours later, I finally have the new AE working, but only after doing several hard resets/factory restores, the works. For some reason, the mac mini could not successfully update any of the connected AEs - whether connected directly into the same AE, or if the Mini was connected to the switch. Nothing worked. Every time I tried to update the AE, it would hang and force me to unplug and plug it back in. It would also never save setting changes. I finally resorted to a friend's macbook to be able to restore it successfully. And once that worked, the mini was able to update the AE flawlessly. Our Point of Sales (POS) machines connect fine, our cameras connect fine, wifi printer connects, and the mini connects, and everything has internet.
Except my iPhone 5. Of course. It gets a signal fine (full bars). It gets an IP address. But I can't surf the web. Or download email. Or iMessages. Anything. No internet access. I try hard restarts on my iphone. I try assigning IP addresses by MAC address. I try resetting the AE. I try renaming the WiFi name. Nothing. I can make a guest network that works (on a different IP table, btw - 172, not 192.) But other than that, no access. Grrrr.
So I have a "working" AE router where some devices successfully connect (through wifi and ethernet) and some dont' (wifi iPhone). My iPhone connects fine to my home TC. So shouldn't be anything to do with that. But I'm at a loss. I'm going to go back and restore everything and power cycle everything tonight or tomorrow night. I don't know if that will help, but it's worth a try. Lord knows it feels like I've tried everything else.
Anyone have any good ideas of where to start besides voodoo dolls and baseball bats?

I took mine back, because I was having these very same issues. We use contivity too. I was able to connect only to one of three of the servers we manage (in Europe). I couldn't connect to the servers in Asia or here in the USA.
Replaced the Airport Extreme with my trusty old d-link 624, and no issues connecting to any of the three hubs.
Otherwise, I liked the Airport Extreme, and I'll consider buying it again when and if they address this VPN issue. I work at home so its obviously a "deal breaker" for me.

IQ826t Restart and Heating Issue

One thing I definitely do not like the HP's support especially when they will not allow us to buy a 7 Upgrade from Vista nor will they support something (even when I find their glitches and they admit after telling me it was just the OS).. On Repair work, I had to ship it out and this will be my 2-3 time to do repair on this PC in the past 3 years (and I have to wait a week for the repair to be done...)
Besides that, IQ826t, Win 7 Ultimate SP1
All Drivers are up to date with HP website (utilizing Win 7 64 bit drivers and Firmware is up to date). AVG update/scan (no issue - confirmed even rootkit).. Malwarebyte - Scan and no issue
Disk Cleanup, Disk Defragmentation done on a monthly and quarterly schedule
Biggest Issue:
I am getting a crash with Win 7 0x124 Stop Error Message (happens periodically and even after a reboot)
Never had this issue until May and the upgrade to Win 7 was done last year with SP1 update done on March (so it is not an issue with the OS as HP support personnel seems to think... I proved them the issue with Windows Update History, The Bluescreen error code on my error code reader).. This machine under warranty and I had issues with it constant (even in Vista)
They state that it is the OS.. Again, if that was the case, I would think it would happen right away like my Toshiba on SP1 upgrade... That was not the case in the matter. I have a firmware reset (default settings) and the issue persist..
The Error Code relates always HAL.dll or ntoskrnl.exe
One if hardware compatiblity and the other is an OS kernel exe file.. And this usually checking knowledge base relates to hardware failing due to 1) Compatibility (which HP website confirms is not the case) 2) OS corruption (which is not the case checking on safe mode and this happening STILL 3) Heat Issue (which I believe is the issue and was been documented on the Internet
What I am noticing is the unit is extremely HOT (vent is almost burning when it has been off and just turned on).. I wonder if the hardware pieces are literally melting to destruction since I can't just open it up (they state it will void my warranty)
The Symptoms before the Crash (happens any time.. Even right after a power up)
If you are playing audio or video, you will start to hear jitters and sound seems to echo itself .. Video would start to lag and become choppy.. Systems start to slow down and things seem to run very slow.. I have seen the power light on the PC start on but the touchscreen just go black (will not restart sometimes)..
Minor Issues (but could be related)
1) When running PC Hardware Diagnostic, they will come up with an error code in the past and that was warranted for a motherboard replacement (of course, they ship the box to the wrong location and I was in the middle of my wedding so I get to it now).. It was pertaining to PCI Express Status ICH9 PCI Express Root Port where it will generate an error code... Now, running the diagnostic... I will not get any error but PCI Express Root Port 3 & 5 do not show up on the diagnostic... Wouldn't that obvious show something that is a problem when there are 6 ports (which on the previous diagnostic that I can't grab past logs shows that). That is not warranted for a warranty work? Just a note, I got the fail test code (which was intermittent but keep happening and the tech support would not look at previous case.. Port 4 failed and a fatal device code)
2) Blu-Ray player will not run and their answer is that it is your Blu-Ray until they realize that I ran it on 3 different Blu-Ray player standalone, different Blu-Ray, and confirm DVD will work.. They still think it is a software issue until they can't deny my point when it will not read the Blu-Ray no matter what (they took control and confirmed it).. They believe the HP SmartDVD software was failing because of Win 7 and not Vista (even when I downgrade and confirm it works, I stated the software is the issue... Lone and behold, 2 months later they had an update that they refuse to admit I was RIGHT on the matter and done 15 hours of troubleshooting that they were wrong about)
3) Wireless Keyboard and Mouse lost connectivity even if the battery is not low... Just stop typing or omit letters.. This is considering the keyboard is literally in front of the touchscreen
4) Touchscreen is sensitive when it wants to be but won't in other... Constant issues there
This is why I have so much issue with support.. They seem to show that they will do anything to deny the issue.. Heck, I am a computer technian calling on the issue.. It ain't like I didn't troubleshoot on the matter... But they think we are all morons and when I prove them wrong, they will use any excuse to honor warranty... That is why it is amazing..

Look in your Settings > App Manager.
Tap Device Monitor.
Tap the Battery tab.
At the upper right, tap "Since Last Charge" to change to "Last 48 Hours".
What apps or processes are consuming the most battery power?
ALSO, in setting up your new Z30, are you syncing many contacts or calendar data from a connected email account?
Social accounts such as Facebook or Twitter?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

WAE FTP and offline Issue

Similar Messages

Maybe you are looking for