Want to connect hp oj 6800 thru wifi to my laptop with out a wifi router. is it possible?

want to connect hp oj 6800 thru wifi to my laptop with out a wifi router. is it possible?
This question was solved.
View Solution.

Just to add,
The specific model (HP Officejet Pro 8600, assuming I did understood your intention as you did mentioned an Officejet model) only support infrastructure mode using a router. will help to know the exact model as there is no such a model named as Officejet 6800.
The Wireless Setup Wizard will not detect any ad hoc network - you may establish the connection from the computer by selecting the printer SSID but the connection will drop after 60 minutes due the HP Auto Wireless feature included for this model.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

My iPhone 4s is not switching on, I connected it to itunes thru my Windows 7 laptop and it says phone needs to be restored. I clicked okay and it started the process however the progress bar with the apple logo is on the screen, progressbar do not start

My iPhone 4s is not switching on, I connected it to itunes thru my Windows 7 laptop and it says phone needs to be restored. I clicked okay and it started the process however the progress bar with the apple logo is on the screen, progress in the bar did not start yet after 5 hours. Some one please hep me.

I did put it in DFU mode but its still not working, although everytime it shows your iphone needs to be restored. Kindly help.

I'm not able to connect to internet through my wifi router, which is Sitecom 150N working fine with pc

I'm not able with ipod touch to connect to internet through my wifi router, which is Sitecom 150N working fine with pc

Your router may not have given your iPod a valid IP address when the iPod requested it. To check on this go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address shown starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix for this can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPod (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If you need more help please give more details on your network, i.e., your router model and version (the 150n designation is not a unique model), the wifi security being used (WEP, WPA, WPA2), is MAC address filtering being used, etc.

HT1386 Pleae help connecting my iPhone4 5.1.1 to my laptop with error 0xE8000012, I tried the the mentioned steps in this regard, but hopless.

Pleae help connecting my iPhone4 5.1.1 to my laptop with error 0xE8000012, I tried the the mentioned steps in this regard, but hopless.

If you have some idea where the problem might be, you can get finer-grained control over what goes into the error log by setting nsslapd-errorlog-level appropriately. For the settings, see http://docs.sun.com/source/816-5608-10/config.htm#140331

Hi guys..I am new to this apple ipad apps development .I want to know how to change ipad apps to iphone apps with out changing design and code?can any one tell me?

Hi guys..I am new to this apple.I have developed ipad2 apps . I want to know how to change ipad apps to iphone apps with out changing design and code?can any one tell me?

You are in the wrong forum. This is a user forum. Try the developers forum.

I am trying to connect my server using an Ethernet to router and want to search the internet using another wifi router. How can I accomplish this?

I have a small storage server and want to connect to it via Ethernet. I also want to connect the internet using a separate Wifi router from my provider. How can I do both?

Set the service order to have wifi first.
System Preferences > Network > Click on the gear > Set Service order

Why doesn't my iPhone 5,2 (iOS8) want to connect to 2,4 ghz wifi networks anymore?

Only when I'm next to the wifi router I can connect to a 2,4 ghz network. When I move 1 or 2 meters, the connection just drops out. With 5 ghz network there's no problem at all. How can I figure out if this is a software or hardware problem., and what is a possible solution? My iPhone turned 2 years old recently, so I guess I don't have to count on any warranty or other support?

Hi,
MY network at home was originally set up as a 2.4 ghz network, it worked fine until a week ago. By changing it I noticed my wifi on my iPhone was working again. The problem is however at work for example it's probably also 2.4 ghz. Because I cant connect, only when standing nearby the router. That's why I'm wondering how I can figure this out, is it software, hardware or something else. Tried resetting and restarting. But none of it seemed to solve the problem.

Apple Product connection to Internet via a Wifi Router on a Class B Network

Hi, I am trying to connect my Apple devices to the Internet on a Class B network via a WiFi Router. My devices did connect via the same Wifi Router when it was on an A Class Network (which has changed to B Class), so don't suspect router.
Is there a configuration change required on the Router or Apple device to make it work on the B-Net?
Any advice appreciated.
Regards
Matt

Hey MattnDonna!
You may want to make sure your wireless network conforms to the following settings:
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/ht4199
If you are still having issues connecting your devices after adjusting those settings, you may need to use the following articles for further troubleshooting:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

I have a macbook 2.1 with osx10.6.8 and want to wipe it clean and migrate from my macbook pro with the same osx..is it possible to do?

I have an older macbook 2.1 intel OSX 10.6.8 that I want to wipe clean and then migrate from my macbbok pro with OSX10.6.8 to the older macbook, is it possible ,how would I do it..especially how do I wipe clean the older macbook?

Connecting to a TV is no different than connecting to any other external display. It's possible that there's a problem with the mini dvi port on the macbook r that you have bad adapters. You might try resetting the SMC Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
Does the Macbook recognize that there's an external display connected when you look at the Display preference pane?

How do I connect a mac cinema display to a dell laptop with VGA output?

I need to connect my coworkers Mac Cinema display to his Dell Laptop with VGA out, running Windows 7. We have a VGA to DVi adapter, but it doesn't work. Do we need a different adapter or a driver? Thanks.

DVI-I offered by most computers has support for up to a wider-than-1920 Digital display AND a complete set of VGA signals in it.
If you have an adapter from DVI [computer] to VGA [display] it has no conversion logic in it and should be called a VGA extractor. It will NOT work the other direction.
I think what you need is a better computer or a worser (VGA) display.

How do I connect Monitor without HDMI (but DVI-D) to laptop with micro-HDMI?

I have a Samsung NP900x400D-A02US laptop... the video connections are:
- a micro-HDMI
- a "monitor port" (which the manual says supports 15 pin D-Sub interface.. or you can connect VGA adapter),
I would like to buy the Dell Ultrasharp u2412M which has 1900x1200 resolution.... BUT it does not have an HDMI port. It has:
- a display port
- VGA input
- DVI-D with HDCP Input
- USB ports (but I don't think it's the kind that will allow me to hook up thge monitor to the laptop with USB)
How the heck do I connect the 2 of these... in a way that retains the 1900x1200 resolution? if I can't find a good way I might have to find another monitor with HDMI....
Thanks so much for your help! It's a bit frustrating to sort through it all....
Kathryn

I ended up finding it by item #, because I would have missed it, too. I wasn't sure if the product image was correct until I saw this:
Connector on First End: 1 x HDMI (Micro Type D) Male Digital Audio/Video
You got it figured out. Hooks up exactly like you said. HDMI and DVI will result in same picture quality, but as you mentioned, HDMI doesn't carry audio. They are the same, for all intents and purposes, in all other regards.
The DVI cable should have thumbscrews on each end, to help secure it at each end. The Adapter I linked has 'receptors' for the thumb screws, so the connection will be secure. The monitor should have the same 'receptors' for thumb screws. The weakest point of the connection, physically, will be the Micro-HDMI, so just be careful to not put pressure on that connection.

I want to connect an Airport Express via WiFi to my internet connection and then connect its LAN port to the WAN port of a Time Capsule. Will then any device connected to the time capsule wirelessly be also connected to the internet?

Background is I can't hook up my time capsule directly to my internet connection via network cable. I tried to extend the network via Wifi, but that did not work. At the moment I have two wireless networks, one with internet connection and another one with my time capsule. So to use time machine I have to change my network all the time.
Can I buy an Airport Express, use is as a client to my internet connection wifi and provide that connection via network cable to my time capsule and all it's wifi clients?

The AirPort Express will connect to your existing wireless network if the network is using WPA2 Personal or WPA/WPA2 Personal wireless security settings.
So, it can join the network as a client and then provide an Ethernet signal to your Time Capsule.
Be sure to configure the Time Capsule to operate in Bridge Mode so that it will be operating on the same network.

HT1222 when i try to update my ipod touch 4gen it says unable to verify update iOS 6.0.1 failed bcoz your are no longer connected to the internet but im connected to the internet thru wifi?

how to fix this problem,what should i do?please give some advice thx...

Just keep trying. It happened to me and others too. Mine completed on the second try.

Connecting kurzweil sp88 to GB I want to connect my Kurzweil sp88 to GB. The Kurzweil has a baffling array of buttons and possible MIDI channels. It also has the old style MIDI plug ins. I've got the MIDI out connected to my MacBook Pro via USB adapter.

I have my Kurzweil connected to my MacBook Pro via an adapter (old style MIDI from Kurzweil to USB adapter connecting to Mac). The Kurzweil has a baffling array of buttons and possible MIDI channels. Can anyone please tell me which of the channels I should use? Also, should I leave the MIDI In cable out of the Kurzweil? Thanks for as detailed an answer as possible. If you like you can respond directly to me at [email protected]

First of all I do not own this keyboard. But a quick look at the manual (found on the internet) says that when first powered up the SP88 is in Internal Sounds mode. Meaning you hear the sounds selected when playing the keyboard. It also stated that the default Midi Transmit Channel is Midi Channel #1.
Looks like you would need to go to the SP88 Keyboard's MIDI SETUP and simply select LOCAL OFF. Now the keyboard should be ready to transmit Midi Out only and no internal sounds should be heard.
Next you may or may not need to do this but you might need to go into the Utilities Folder found in your Applications Folder on your Mac and double click AUDIO MIDI SETUP the keyboard Icon. Figure #1 below.
Next you need to make a physical connection from the Midi Out of the SP88 to the Midi In on your Midi Interface. Figure #3 below. You may need to Click on Add Device first. Figure #2 below.
In the examples shown below I have a Yamaha Electronic Drum Kit that is Midi Out only... not USB out. I had to plug a Midi cable from the Midi Out Port on the back of my Drum Module to the Midi In Port on the back of my Motu 828 Audio Inferface which is connected to my Mac. Next I created the Audio Interface and Drum Module "Devices" as mentioned above.
I then double clicked on the Drum Module and made my Midi Out Selections. Figure #4 Below. And once it was setup and the icons closed I used my mouse to draw a virtual cable connection from the Drum Module Out to the Audio Interface In. Figure #3 below. This is how I got my Midi Devices to talk to one another.
Once you have made your setup as I have outlined create a MIDI Instrument Track in Garageband, select an instrument for example a Piano then Record Enable that track in Garageband and see if you now hear what you are playing. In this example the SP88 is a Midi Controller only and you will only hear sounds selected in Garageband which is what you want.
Keep in midi your setup may be different than mine. You can keep your SP88 Keyboard on the default Midi Channel #1. That would be a good place to start. Garageband receives Midi on all channels.

Connecting to iTunes via a wifi router

I have a wireless router on my network and the wireless subnet is different from the wired subnet. My Internet connection is via a cable modem on the wired subnet, and that is working fine for my wireless devices. What doesn't work is iTunes on the wired subnet WiFi access of my iPad. If I remove the gateway routing, and make the wireless subnet the same as the wired, it works fine. However, I need to have the flexibility to be able to modify the wireless subnet to be able to manage other devices on other subsets (long story, and not really relevant here), so I'm wondering if there is anything I can do to get iTunes to work through the router?

Investigate router firewalls. After much weeping and gnashing of teeth, I learned that a router firewall can block IOS (iPad and iPod) communication without affecting other devices, such as computers. Temporarily turn all firewalls off and determine if the iPad works. If it does, turn the firewalls back on but weaken them as required to allow iPad communications.

Want to connect hp oj 6800 thru wifi to my laptop with out a wifi router. is it possible?

Similar Messages

Maybe you are looking for