Warranty Relationship not available in category

Hi,
I am trying to add 'Warranty for products' relationship in category for material. But this option is not available in dropdown list. How is relationship dependent on set type?
I created another hierarchy and added a category for material to it. But to my surprise this relationship was available here. I could easily use this category but new issue is that I don't see any set type for 'Distribution Chains' block in this category. This was available in previous one.
Can anyone help me to really understand concept behind it and propose any solution to this problem?
Regards,
Shikha

Requirement dropped.

Similar Messages

  • TS4079 My ipad microphone next to the front camera, is not working at all, what can I do if the warranty is not available

    My ipad microphone next to the front camera, is not working at all, what can I do if the warranty is not available

    Did you flip the switch?
    http://i1224.photobucket.com/albums/ee374/Diavonex/91e9edf6b2127310428d94cf75cb6 15a_zps380c63c4.jpg

  • Service Desk with IC WebClient: Category Modeler not available

    Hello,
    We are currently implementing a Service Desk Application based on SAP Solution Manager. Therefore we are using the article "Implement an ITIL Employee Service Desk with IC WebClient" of "www.CRMExpertOnline".
    One of the steps, which are described in the article describes how to Categorize incidents with the Category Modeler. It says that the Category Modeler is available trough BSP Application CRMM_ERM_CAT.
    Unfortunately this SAP-Application is not available on our system.
    Our System Data:
    SOFTWARE COMPONENT               RELEASE                    LEVEL               HIGHEST SUPPORT PACKAGE          DESCRIPTION
    SAP_BASIS                                        700                              0012               SAPKB70012                                        SAP Basis Component
    SAP_ABA                                             700                              0012               SAPKA70012                                        Cross-Application Component
    PI_BASIS                                        2005_1_700          0012               SAPKIPYJ7C                                        PI_BASIS 2005_1_700
    ST-PI                                                  2005_1_700          0005               SAPKITLQI5                                        SAP Solution Tools Plug-In
    SAP_BW                                             700                              0014               SAPKW70014                                        SAP NetWeaver BI 7.0
    SAP_AP                                             700                              0009               SAPKNA7009                                        SAP Application Platform
    BBPCRM                                             500                              0009               SAPKU50009                                        BBPCRM
    CPRXRPM                                             400                              0009               SAPK-40009INCPRXRPM                    SAP xRPM/cProjects/cFolders 4.00 (ABAP)
    BI_CONT                                             703                              0005               SAPKIBIIP5                                        Business Intelligence Content                    
    ST                                                       400                              0012               SAPKITL422                                        SAP Solution Manager Tool                            
    ST-A/PI                                             01I_CRM500          0000         -                                                                 Application Servicetools for CRM 500         
    ST-ICO                                             150_700                    0009               SAPK-15079INSTPL                         SAP Solution Manager Implementation Cont
    ST-SER                                             700_2006_2          0003               SAPKITLOK3                                        SAP Solution Manager Service Tools
    Does anybody know where I can find/download the category modeler-application?
    Thanks in advance,
    Andreas

    Hello Andreas,
    The question is that  CRMM_ERM_CAT is an application, also a transaction but this is not the name of the associated BSP I think, this belongs to component CRM-PCF more than Solution Manager.
    I have seent some messages speakin about to call:
    http://server:port/sap/bc/bsp/sap/crm_bsp_frame/entrypoint.do?
    appl=CRMM_ERM_CAT
    Sorry! I can not tell you more about this, regards,
    Dolores

  • Product category not available error in SAP CRM 7.0

    hi Gurus,
    while i try creating opportunity transaction, there under product tab when i enter product category(as we maintian product category and not product) and pass on other data and finally press enter ..i get error "product category "3lAA" not available" same for other category. even when i try F4 help only very few categories it shows, not all.
    but then i went back and checked for category and hierarchy in CRM system ..it is showing all there and it is downloaded form R/3 system.
    Can you please tell me what all places i can check..? or what is missing ?
    Thanks,
    gaurav

    Hi,
          I believe all the categories which you are viewing currently in the pop up are from a single hierarchy ( Most probably R3PRODHIER). And the categories which you are looking for is probably from a different hierarchy ( R3MATCLAS, R3PRODSTYP etc.).
    By standard, for sales applications only R3PRODHIER is supported. Please have a look at the IMG path Cross-Application Component->SAP Product-> Product Category->Assign Category Hierarchy to Applications, where you can verify this. If you are so particular about using categories from a different hierarchy you might need to change this setting - I am not sure about other implications that can cause if you change that like downloading from R/3 etc.
    Regards,
    Sreejith

  • IPad constantly reboots every 2-3 minutes, after full recovery is not activated to  wi-fi, and Itunes - for 20 days, Itunes says that the activation was not possible because the server is not available try again later. Ipad under warranty, but he was more

    IPad constantly reboots every 2-3 minutes, after full recovery is not activated to  wi-fi, and Itunes - for 20 days, Itunes says that the activation was not possible because the server is not available try again later. Ipad under warranty, but he was more than 6 months, so please call customer service apple can not. by DFU also restored Official Ipad bought in a store in Russia. When buying activated immediately.  IMEI 013311005943507. Help please! the official service Moscow  representation FDA ipad offer to send in the U.S. for $ 500!

    Hello this is happening to us also (minus the Bluetooth speaker).  We can't figure out what is causing the data usage.  I turned off mobile data as soon s I activated the device, and got the message that unless I am connected to WiFi.....(that is exactly what I wanted). We watched Netflix for about three hours, then the alerts started.  Like you we have many devices connected and never used over 2GB now all of a sudden we have used it in a matter of hours.  My husband called Verizon  and got the usual doubting Thomas response.  I understand that they don't know my device settings.  So over the phone we check all the settings and turned  off every possible culprit eating up the data and end the call.  By now I have purchased another gig for the month!  Assured we are NOT using mobile data, we continue on the IE path to bliss.  HA!  A few hours later I check the mobile data usage on the Verizon website and that darn thing is still using data.  After two more phone calls and two VERY uneventful trips to the local store we were told to take out the sim card.  This has stopped the data usage, but it defeats the purpose of having the data plan.  I could have just stuck with my Surface.  Verizon sent us a new sim card.  Its been installed and I have set my homepage to Verizon mobile data usage (just kidding) but I am on that site a lot.   I am surprised at the number of complaints about this device.  When we called the Verizon support acted as though this was the first time they had heard about this.   Loved your post, you should write for a living.

  • Item Category Group 0001 not available

    Hi,
    We need to use Item Category Group 0001 - Make-to-order in CRM 2007. This group is not available as of CRM 2007. The list starts with 0002 - Config.at Mat.Level.
    Is it a standard setting or only our CRM 2007 instance is missing this?
    If it is a standard arrangement, do we need to maintain a Z Item category group for Make to order products?
    Kindly resolve the confusion!!
    Thanks,
    Sharad

    Hi,
    The item category group 0001 is missing.I guess then you need to create a new type on your own.
    Regards,
    Abishek

  • Item category not available in the table T184

    Hi Gurus,
    When the PP consultant is trying to Create Individual Items using MD81, it is giving the error " Item category not available in the table T184" But from the SD side, I have assigned the item category to the sales document type. also the field for item category ( PSTYV ) is present in the table T184. What can be the problem? is this any issue related to SD?
    Thanks & Regards
    Kaushik Ghosh

    Check the material master for the material for which you are trying to create the Independent Requirements. The Item Category group mentioned should be be wrong there, as by message i am understanding that system is not able to determine the Item Category for your concerned material.
    Item category determination is done in T184 table with the combination Sales Document Type/Item Category group/Item Usage/Item Category of Higher level item/ Default Item Category.
    Hope this helps.
    Regards,
    Vivek Sahni

  • After upgrading to IOS 5.1 I no longer can see Verizon at the top of my Iphone and under settings general Network says Not Available Why is this? Did the upgrade cause this?

    after upgrading to IOS 5.1 I no longer can see Verizon at the top of my Iphone and under settings>general>Network>says Not Available Why is this? Did the upgrade cause this?
    steve

    See this tip --> http://support.apple.com/kb/TS1559
    If this doesn't resolve it you most likely have a hardware failure. Fortunately, your phone is in warranty, so if you take it to an Apple store they will replace it.

  • Cisco 5.0 "Your messages are not available now" after exchange 2010 and DC migration to a new host

    Guys,
    First of all, thanks for looking at this post. Hopefully you guys can help me out. My unity users, when dialing into voicemail are getting the message "Your messages are not available now".
    Services in error state under the event viewer:
    Event Type:    Error
    Event Source:    CSAgent
    Event Category:    Kernel Rule 
    Event ID:    256
    Date:        7/29/2014
    Time:        11:42:41 AM
    User:        N/A
    Computer:    UNITY
    Description:
    A packet with a bad transport layer header was detected. Reason: Illegal TCP reserved flags set using interface Wired\HP NC324i PCIe Dual Port Gigabit Server Adapter. TCP: 00.000.00.000/443->00.00.0.00/1241, flags 0x10. The operation was denied.
    Event Type:    Error
    Event Source:    CiscoUnity_MALEx
    Event Category:    Error 
    Event ID:    30012
    Date:        7/29/2014
    Time:        11:44:27 AM
    User:        N/A
    Computer:    UNITY
    Description:
    An occurred which prevents successful Exchange access by CsBMsgConnector via MAPI.
    This is typically an indication of configuration issues with Unity, Exchange, or the MAPI subsystem.
    Verify that the Unity services accounts are granted the correct permissions and that there are no issues with installation.  The SysCheck utility may assist in diagnosing the problem.
    Event Type:    Error
    Event Source:    CiscoUnity_Doh
    Event Category:    Error 
    Event ID:    32013
    Date:        7/29/2014
    Time:        11:44:27 AM
    User:        N/A
    Computer:    UNITY
    Description:
    Doh logon failed due to messaging component logon error: 8004052eH
    I found and followed to the letter:
    http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unity/107323-unity-error.html
    I also went ahead and ran GUSI with some mixed results under environment information:
    SQL Version = Microsoft SQL Server  2000 - 8.00.2282: unknown SP
         SQL Edition = Desktop Engine
         Windows version =  5.2 Build 3790: Service Pack 2
         Outlook is not installed on the local server
         MAPI Provider : CDO Version - 6.5.8211.0
         MAPI Shared Memory: (HKLM:SOFTWARE\Microsoft\Windows Messaging Subsystem\Applications\<process>\SharedMemMaxSize)
                AvCsMgr : is set to recommended value
                AvMsgStoreMonitorSvr : RegKey not found.  Recommend add the key AvMsgStoreMonitorSvr and set DWORD SharedMemMaxSize with a value of 4194304 (decimal)
                AvNotifierMgr : RegKey not found.  Recommend add the key AvNotifierMgr and set DWORD SharedMemMaxSize with a value of 4194304 (decimal)
                AvUMRSyncSvr : is set to recommended value
                CsBMsgConnector : RegKey not found.  Recommend add the key CsBMsgConnector and set DWORD SharedMemMaxSize with a value of 4194304 (decimal)
                CsBridgeConnector : RegKey not found.  Recommend add the key CsBridgeConnector and set DWORD SharedMemMaxSize with a value of 4194304 (decimal)
                CsVpimConnector : RegKey not found.  Recommend add the key CsVpimConnector and set DWORD SharedMemMaxSize with a value of 4194304 (decimal)
             TCPChimney : Disabled
             RSS : Disabled
             *Pulled from UnityDB Configuration Table*
             ExcludeAllReceipts : 0
             ExcludeReturnReceipts : 0
             DisableSearchFolderUse : 0
             MinSearchFolderLifeHours : 1
             OptimizeSearchFolderUse : 0
    I tried following and deleting the Unity System Profile:
    https://supportforums.cisco.com/discussion/11249996/unity-501-exchange-2010-unable-logon-mapi-mailbox
    But I am still scratching my head. Any direction will be appreciated.

    Turns out that unity came back after all this. Maybe it just needed time. I think I answered my own question.  Anyways, this post could serve for future reference. 

  • Error trying to Connect to WSE 2012 R2 with Connector Software - The server is not available

    I had to completely reset my MS Surface Pro 3 due to virus activity, so it was wiped and reinstalled. It had previously connected to the Server without
    hiccup. Ever since doing this I cannot reconnect using the SERVERNAME\Connect process - it continually fails. I have reviewed the forums and web for a week trying different solutions to no avail. I would appreciate it if someone could advise?
    I have:
    Ensured that the Connector Software update is not installed from Installed Updates
    Checked the Bindings in IIS Manager against the WSS Certificate Web Service and it is set to SERVERNAME.
    Ensured my time on the Client is synchronised
    Tried connecting using the original PC-Name and when that didn't work, I have tried a new name and removed the old device from the server.
    I have ensured that I am on a Workgroup.
    The install process finds the server sets up connector and asks for my network user name and password and then continues for a fair time until it
    comes back with the error”:
    "The server is not available/ Try connecting this computer again, of for more information, see Troubleshoot connecting computers to the server.”
    I am not sure how much of the log to include as it all doesn’t fit:
    [1380] 150118.132140.0358: ClientSetup: Start of ClientDeploy
    [1380] 150118.132140.5201: General: Initializing...C:\windows\system32\Essentials\ClientDeploy.exe
    [1380] 150118.132140.5201: ClientSetup: Create client deployment registry subkey if necessary
    [1380] 150118.132140.5358: ClientSetup: The initial launching way: -LaunchedFrom:installer
    [1380] 150118.132140.5358: ClientSetup: The initial state is set
    [1380] 150118.132140.5358: ClientSetup: The initial serverName: 192.168.1.100
    [1380] 150118.132140.5358: ClientSetup: Loading Wizard Data
    [1380] 150118.132140.5670: ClientSetup: Saving Wizard Data
    [1380] 150118.132140.5826: ClientSetup: Current DeploymentStatus=Start
    [1380] 150118.132140.9420: ClientSetup: Showing the Client Deployment Wizard
    [1380] 150118.132141.0670: ClientSetup: Machine name:SURFACE3RUTH, length:12
    [1380] 150118.132141.0983: ClientSetup: The input server name is 192.168.1.100
    [1404] 150118.132141.1295: ClientSetup: Entering ConnectorWizardForm.RunTasks
    [1404] 150118.132141.1295: ClientSetup: Running Task with Id=ClientDeploy.PreConfiguration
    [1380] 150118.132141.1295: ClientSetup: InitWizard, The currrent stage is ConnectingToServer
    [1380] 150118.132141.1295: ClientSetup: Set the Deployment Sync Event
    [1404] 150118.132141.1764: ClientSetup: The configuration cab will be downloaded from 192.168.1.100
    [1404] 150118.132141.1920: ClientSetup: Download file Setup.cab from server
    [1404] 150118.132141.2233: ClientSetup: Making web request: https://192.168.1.100//connect/default.aspx?Get=Setup.cab&LanguageId=2057&64bit=1
    [1404] 150118.132141.5358: ClientSetup: Failed to download Setup.cab from server: System.Net.WebException: The underlying connection was closed: Could
    not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authentication.AuthenticationException: The remote certificate is invalid according to the validation procedure.
    at System.Net.Security.SslState.StartSendAuthResetSignal(ProtocolToken message, AsyncProtocolRequest asyncRequest, Exception exception)
    at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
    at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
    at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
    at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
    at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
    at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
    at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
    at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
    at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
    at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
    at System.Net.Security.SslState.ForceAuthentication(Boolean receiveFirst, Byte[] buffer, AsyncProtocolRequest asyncRequest)
    at System.Net.Security.SslState.ProcessAuthentication(LazyAsyncResult lazyResult)
    at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
    at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
    at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
    at System.Net.TlsStream.ProcessAuthentication(LazyAsyncResult result)
    at System.Net.TlsStream.Write(Byte[] buffer, Int32 offset, Int32 size)
    at System.Net.ConnectStream.WriteHeaders(Boolean async)
    --- End of inner exception stack trace ---
    at System.Net.HttpWebRequest.GetResponse()
    at Microsoft.WindowsServerSolutions.ClientSetup.CSCommon.DownloadFileFromConnectSite(String outputDirectory, Uri serverUrl, String fileName, Int32 languageId, Boolean is64bit)
    [1404] 150118.132141.5358: ClientSetup: Cannot get configuration file with https, will try http...
    [1404] 150118.132141.5358: ClientSetup: Download file Setup.cab from server
    [1404] 150118.132141.5358: ClientSetup: Making web request: http://192.168.1.100//connect/default.aspx?Get=Setup.cab&LanguageId=2057&64bit=1
    [1404] 150118.132141.7233: ClientSetup: Downloaded file C:\windows\Temp\ClientDeploymentTempFiles\Setup.cab
    [1404] 150118.132141.7233: ClientSetup: The configuration cab is downloaded to C:\windows\Temp\ClientDeploymentTempFiles\Setup.cab
    [1404] 150118.132141.9264: ClientSetup: Adding Server Info data in the Product Registry
    [1404] 150118.132142.8170: Networking:DnsEnvironmentDetector: Dns.GetHostAddresses threw exception: System.Net.Sockets.SocketException (0x80004005):
    No such host is known
    at System.Net.Dns.InternalGetHostByName(String hostName, Boolean includeIPv6)
    at System.Net.Dns.GetHostAddresses(String hostNameOrAddress)
    at Microsoft.WindowsServerSolutions.Networking.ServerDiscovery.DnsEnvironmentDetector.GetAddressesFromDns(String machine)
    [1404] 150118.132142.8170: DnsEnvironmentDetector: No result from GetHostAddresses(), normal environment
    [1404] 150118.132142.8170: ClientSetup: Exiting PreConfigTask.Run()
    [1404] 150118.132142.8170: ClientSetup: Task with Id=ClientDeploy.PreConfiguration has TaskStatus=Success
    [1404] 150118.132142.8170: ClientSetup: Task with Id=ClientDeploy.PreConfiguration has RebootStatus=NoReboot
    [1404] 150118.132142.8170: ClientSetup: Exting ConnectorWizardForm.RunTasks
    [1896] 150118.132158.7568: ClientSetup: Running InstallRootCert Task at WizardPage DomainUserCred
    [1896] 150118.132158.7568: ClientSetup: Entering ConnectorWizardForm.RunTasks
    [1896] 150118.132158.7568: ClientSetup: Running Task with Id=ClientDeploy.InstallRootCertTask
    [1896] 150118.132158.7880: ClientSetup: Entering InstallRootCertTask.Run
    [1896] 150118.132158.7880: ClientSetup: Install root cert to local trusted store
    [1896] 150118.132158.7880: ClientSetup: Exiting InstallRootCertTask.Run
    [1896] 150118.132158.7880: ClientSetup: Task with Id=ClientDeploy.InstallRootCertTask has TaskStatus=Success
    [1896] 150118.132158.7880: ClientSetup: Task with Id=ClientDeploy.InstallRootCertTask has RebootStatus=NoReboot
    [1896] 150118.132158.7880: ClientSetup: Exting ConnectorWizardForm.RunTasks
    [1896] 150118.132158.7880: ClientSetup: Running SetupVPNAndDA Task at WizardPage DomainUserCred
    [1896] 150118.132158.7880: ClientSetup: Entering ConnectorWizardForm.RunTasks
    [1896] 150118.132158.7880: ClientSetup: Running Task with Id=ClientDeploy.SetupVpnAndDATask
    [1896] 150118.132158.8193: ClientSetup: Entering SetupVpnAndDATask.Run
    [1896] 150118.132158.8974: ClientSetup: Exting SetupVpnAndDATask.Run
    [1896] 150118.132158.8974: ClientSetup: Task with Id=ClientDeploy.SetupVpnAndDATask has TaskStatus=Success
    [1896] 150118.132158.8974: ClientSetup: Task with Id=ClientDeploy.SetupVpnAndDATask has RebootStatus=NoReboot
    [1896] 150118.132158.8974: ClientSetup: Exting ConnectorWizardForm.RunTasks
    [1896] 150118.132158.8974: ClientSetup: Running ValidateUser Tasks at WizardPage DomainUserCred
    [1896] 150118.132158.8974: ClientSetup: Entering ConnectorWizardForm.RunTasks
    [1896] 150118.132158.8974: ClientSetup: Running Task with Id=ClientDeploy.ValidateUser
    [1896] 150118.132158.9286: ClientSetup: Entering ValidateUserTask.Run
    [1896] 150118.132158.9286: ClientSetup: Validating User
    [1896] 150118.132158.9286: ClientSetup: Call MachineIdentityManager.GetMachineStatus
    [1896] 150118.132200.2412: ClientSetup: Current Machine Join Status: NotExists
    [1896] 150118.132200.2412: ClientSetup: Exiting ValidateUserTask.Run
    [1896] 150118.132200.2412: ClientSetup: Task with Id=ClientDeploy.ValidateUser has TaskStatus=Warning
    [1896] 150118.132200.2412: ClientSetup: Task with Id=ClientDeploy.ValidateUser has RebootStatus=NoReboot
    [1896] 150118.132200.2412: ClientSetup: Exting ConnectorWizardForm.RunTasks
    [1896] 150118.132203.5996: ClientSetup: User has chosen to continue using domain admin credentials
    [1896] 150118.132203.5996: ClientSetup: Running JoinNetwork Tasks at WizardPage DomainUserCred
    [1896] 150118.132203.5996: ClientSetup: Entering ConnectorWizardForm.RunTasks
    [1896] 150118.132203.5996: ClientSetup: Running Task with Id=ClientDeploy.JoinDomain
    [1896] 150118.132203.6152: ClientSetup: Entering JoinDomainTask.Run
    [1896] 150118.132203.6152: ClientSetup: Domain Join Client to Server Domain: ClientComputerName=SURFACE3RUTH ServerDomainNetBiosName=AHYICK
    [1896] 150118.132203.6152: ClientSetup: Trying to evaluate if we need to set Local Nic Dns address be the same as server DNS setting.
    [1896] 150118.132204.4590: ClientSetup: DNS failed to resolve server's host name, needs set DNS
    [1896] 150118.132204.4590: ClientSetup: Trying to set DNS setting.
    [1896] 150118.132204.4590: ClientSetup: Configure DNS settings on local NIC
    [1896] 150118.132205.7153: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '192.168.1.1', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1896] 150118.132206.7787: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '192.168.1.1', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1896] 150118.132207.8293: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '192.168.1.1', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1404] 150118.132214.6885: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '10.0.0.138', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1404] 150118.132224.7076: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '10.0.0.138', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1404] 150118.132234.7311: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '10.0.0.138', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1896] 150118.132235.8561: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '192.168.1.1', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1896] 150118.132236.9186: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '192.168.1.1', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1896] 150118.132237.9655: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '192.168.1.1', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1404] 150118.132244.8406: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '10.0.0.138', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1404] 150118.132254.8601: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '10.0.0.138', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1404] 150118.132304.8898: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '10.0.0.138', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1896] 150118.132306.0148: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '192.168.1.1', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1896] 150118.132307.0461: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '192.168.1.1', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1896] 150118.132308.1131: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '192.168.1.1', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1404] 150118.132314.9742: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '10.0.0.138', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1404] 150118.132324.9961: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '10.0.0.138', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1404] 150118.132335.0140: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '10.0.0.138', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1896] 150118.132336.1495: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '192.168.1.1', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1896] 150118.132337.1888: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '192.168.1.1', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1896] 150118.132338.2320: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '192.168.1.1', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1404] 150118.132345.1355: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '10.0.0.138', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1404] 150118.132355.1699: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '10.0.0.138', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1404] 150118.132405.2086: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '10.0.0.138', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1896] 150118.132406.3337: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '192.168.1.1', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1896] 150118.132407.3883: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '192.168.1.1', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1896] 150118.132408.4351: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '192.168.1.1', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1404] 150118.132415.3043: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '10.0.0.138', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1404] 150118.132425.3696: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '10.0.0.138', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1404] 150118.132435.4170: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '10.0.0.138', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1896] 150118.132436.5769: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '192.168.1.1', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1896] 150118.132437.6137: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '192.168.1.1', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1896] 150118.132438.6607: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '192.168.1.1', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1404] 150118.132445.5693: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '10.0.0.138', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1404] 150118.132455.5861: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '10.0.0.138', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1404] 150118.132505.6068: PInvoke: DnsValidateServerStatus(out serverStatus = 'DNS_VALSVR_ERROR_NO_TCP (0x00000010)', serverIP = '10.0.0.138', queryName
    = '') returns 'DNS_ERROR_RCODE_NO_ERROR (0x00000000)'
    [1896] 150118.132505.6068: ClientSetup: Could not successfully set the DNS of any client NIC
    [1896] 150118.132505.6068: ClientSetup: Failed to set Local Nic Dns address as the Server IP.
    [1896] 150118.132505.6068: ClientSetup: NetGetJoinInformation (server = [], ...)
    [1896] 150118.132505.6148: ClientSetup: Running Join Domain
    [1896] 150118.132505.6148: ClientSetup: Disconnect any share to the server.
    [1896] 150118.132505.6148: ClientSetup: NetUseEnum (UncServerName = [] )
    [1896] 150118.132505.6304: ClientSetup: NetUseEnum (UncServerName = [] )
    [1896] 150118.132505.6304: ClientSetup: Trying to clear dns cache.
    [1896] 150118.132505.6304: ClientSetup: ComputerMgmt.FlushDnsCache starts
    [1896] 150118.132505.6461: ClientSetup: ProcessHelper.StartProcessWithRedirectOutput() Executing "C:\windows\system32\ipconfig.exe" /flushdns
    [1404] 150118.132505.6832: ClientSetup: Standard Ouptput:
    [1404] 150118.132505.6832: ClientSetup: Standard Ouptput: Windows IP Configuration
    [1404] 150118.132505.6832: ClientSetup: Standard Ouptput:
    [3964] 150118.132505.6832: ClientSetup: Standard Ouptput: Successfully flushed the DNS Resolver Cache.
    [3964] 150118.132505.6832: ClientSetup: Standard Ouptput:
    [5080] 150118.132505.6832: ClientSetup: Standard Error:
    [1896] 150118.132505.6832: ClientSetup: The exit code of the process (C:\windows\system32\ipconfig.exe) is: 0
    [1896] 150118.132505.6832: ClientSetup: Calling SetPrimaryDnsSuffix.
    [1896] 150118.132505.6832: ClientSetup: SetPrimaryDnsSuffix (AHYICK.local)
    [1896] 150118.132505.6832: ClientSetup: SetComputerNameEx (AHYICK.local)
    [1896] 150118.132505.6832: ClientSetup: Update tcpip Domain parameter with AHYICK.local
    [1896] 150118.132505.6832: ClientSetup: Calling join domain [AHYICK.local] with domain user [AHYICK.local\Basil] credential.
    [1896] 150118.132505.6832: ClientSetup: Joining local machine to domain AHYICK.local
    [1896] 150118.132505.6832: ClientSetup: NetJoinDomain( , AHYICK.local, , AHYICK.local\Basil, *, NetSetupJoinDomain, NetSetupAcctCreate, NetSetupAcctDelete,
    NetSetupDomainJoinIfJoined, NetSetupDeferSpnSet)
    [1896] 150118.132505.7457: ClientSetup: nativeNetJoinDomain returned ErrCode=1355
    [1896] 150118.132506.7789: ClientSetup: nativeNetJoinDomain returned ErrCode=1355
    [1896] 150118.132507.8248: ClientSetup: nativeNetJoinDomain returned ErrCode=1355
    [1896] 150118.132508.8666: ClientSetup: nativeNetJoinDomain returned ErrCode=1355
    [1896] 150118.132509.8997: ClientSetup: nativeNetJoinDomain returned ErrCode=1355
    [1896] 150118.132510.9440: ClientSetup: nativeNetJoinDomain returned ErrCode=1355
    [1896] 150118.132511.9868: ClientSetup: nativeNetJoinDomain returned ErrCode=1355
    [1896] 150118.132513.0218: ClientSetup: nativeNetJoinDomain returned ErrCode=1355
    [1896] 150118.132514.0673: ClientSetup: nativeNetJoinDomain returned ErrCode=1355
    [1896] 150118.132515.0987: ClientSetup: nativeNetJoinDomain returned ErrCode=1355
    [1896] 150118.132515.1143: ClientSetup: Join domain fails on the first time, exception: System.ComponentModel.Win32Exception (0x80004005): The specified
    domain either does not exist or could not be contacted
    at Microsoft.WindowsServerSolutions.ClientSetup.NativeMethods.NativeMethodRetryWrapper(NativeMethodInvoker nmi, UInt32 numTries, TimeSpan timeToWaitBetweenRetries, String descriptionForLog, UInt32[] retryableErrorCodes)
    at Microsoft.WindowsServerSolutions.ClientSetup.NativeMethods.NetJoinDomain(String server, String domain, String destinationOuPath, String user, SecureString password, JoinDomainOptions joinOptions)
    at Microsoft.WindowsServerSolutions.ClientSetup.ComputerMgmt.JoinDomain(String domainName, String domainUserName, SecureString domainUserPass, String machineAccountOU)
    at Microsoft.WindowsServerSolutions.ClientSetup.ClientDeploy.JoinDomainTask.Run(WizData data)
    I am running a Telstra ADSL modem with a separate Cisco router and Netgear Switch.
    I would appreciate any help I can get please as I am a novice and do not understand a lot about the certificate and DNS errors.

    Would you please try manually set the DNS address on client NIC to the IP of your server, then try run the connector again?

  • My Mac Mini doesn't recognize my Avengers DVD--it keeps saying "Supported disc not available." I've tried other DVD's which work, but not this one. itunes and everything else has been updated to the newest versions. Help?

    My Mac Mini doesn't recognize my Avengers DVD--it keeps saying "Supported disc not available." I've tried other DVD's which work, but not this one. itunes and everything else has been updated to the newest versions. Help? Also...It doesn't recognize the digital copy DVD.

    I have ALL the exact same symptoms as on my home computer.
    It sure sounds to me like something on the iPod is broken. If it's under warranty then I would send it back for repair. If not, check out some of the web repair services, such as iPodResQ etc.

  • Aperture library not available as desktop or screensaver option

    Aperture library is not available as desktop or screensaver option. Nor is it available in Fotomagico. Any ideas?

    Go into "System Preferences" -> "Desktop & Screensaver" -> "Desktop"
    Scroll down the list on the left.  The top categories should be the Apple default desktop images that came with Snow Leopard.  Below that you should see iPhoto and it's events, albums, etc.  Below that you should see Aperture with your projects listed below that.
    Do you at least see the projects listed or does Aperture not even appear?  Or is the problem that you aren't able to select any of the images from a project?
    If the latter I'm wondering if you're missing previews.  You might go into "Aperture" -> "Preferences..." and pick the "Previews" category.  Make sure the check boxes are selected for "New projects automatically generate previews" and "Use embedded JPEG from camera when possible" (if your camera shoots in RAW+JPEG mode then it'll use the JPEGs from the camera as the preview instead of building it's own.)
    You can force it to update previews but note that since it normally wants to generate previews automatically the 'Update Preview(s)' isn't a global function... it only rebuilds the previews for images you have selected (which means you have to go into each project, select all images, and do a "Photos" -> "Update Previews"
    Beyond this, you'd probably need to run Aperture first-aid to determine if there is some corruption in the Aperture library preventing it from being used.

  • Bluetooth not available MacBook Pro (13-inch, Late 2011) Yosemite

    Hi guys, I've been having a problem lately and I can't find a fix for it. My problem is my bluetooth button on the top menu bar had a black squiggly line through it then when I click on it, it says "Bluetooth: Not Available". When I go to system preferences the tab for bluetooth isn't even there its just gone all there is is network. I am trying to connect my magic mouse which has worked fine until now, I had this problem in Mavericks and upgraded to Yosemite to see if that would fix it, Also please note I have tried Resetting PRAM, Deleting the bluetooth files, and Force-quitting "blued" which didn't do anything.

    Well then, unfortunately for you, the conclusion becomes clear: your BlueTooth isn't working correctly anymore.
    You can try reinstalling OS X from the Recovery Partition - boot your computer with the [cmd] + [r] keys pressed until you see a Utilities window - but since upgrading from Mavericks to Yosemite pretty much amounts to a reinstall anyway I am not giving it much of a chance at success. Still, won't hurt though. Contact AppleCare for warranty options.

  • IBooks 1.3 on iPod Touch 2G (4.2.1) dictionary not available for this language

    I have an iPod Touch 2G, running 4.2.1.  I also have iBooks 1.3.  Everything is running well, but unfortunately I do not have the built in dictionary for ebooks that I have bought on the iBooks store.  I have 14 books from their store, but I am not able to look up definitions of words with the iPod Touch.  I also have an iPad 2, but the dictionary works on it (with the same books).  Could someone help me with this situation?  Or, could someone point me in the right direction.  I cannot contact Apple, since my iPod Touch is no longer in warranty.  Thank you.

    I have the same problem with the same iPod Touch 2G. It keeps saying "Dictionary is not available for this language". Before the update, it was working fine...
    Somebody knows how can we go back to an older version of iBooks?

  • Automatic PR if stock is not available

    Hi dudes
    i want automatically to PR to be generated if the material is not available in availability check. The material is a trading good (HAWA). should this be done as processing similar way as individual purchase order or any other option is there. when i am trying to change tan to tab.. it is saying item category TAB is not defined for this item
    regards
    srinivas

    Hi Venkatesh
    the entry for Or type + Itm cat grp + --- + -
    = TAN and here manual itm cat as TAB i have defined. Even then the error is coming.
    is there any other process where if stock is not available automatic PR is created.
    regards
    srinivas

Maybe you are looking for

  • Shortcut keys in E17 with not english layout don't work.

    Hello, I use E17 on my old dell laptop. The problem is when keyboard layout switched to not English one I can't use shortcut keys like ctrl-c, ctrl-v, etc. I tried to configure layouts via xorg configuration, created /etc/X11/xorg.conf.d/01-keyboard-

  • Were can I download App Store for 10.5 and PPC?

    Were can I download App Store for 10.5 and PPC? Also all other legacy software, apps, etc.

  • Master Data loading

    Hello, We have a BW system which is connected to 2 r/3 Systems. The data coming from both the r/3 systems are of two different departments in an organization. R3 extraction from one of the r3 system is completed. I wanted to know that when we do the

  • Strip chart problem

    I have strange problem with LabVIEW 8.0 Evaluation edition chart. Chart is in strip mode, displayaing data from DAQmx Read, sampling rate is 1000 (so multiplier is set to 1/1000) , read samples rate is about 50 samples, everything is normal, but some

  • How to erase all configuration in Cisco ESW 500 Series Switches

    Hi anybody, Anyone show me how to erase or remove  configuration file from ESW 500 Series Switches? Thanks Thuc