WBS element updation through MASS transaction

Hi,
I am trying to update WBS element in Sales order - Item data (Account Assigmanent Tab) using MASS transactiomn, After executing MASS transaction it is updating the same.
Can any one help in this??
Regards,
Srikanth

Hi Mr.Srikky,
I am not sure but try to do the following things
1) Change the WBS manually and save the order, see whether the system allow you to save the order or not.
2) If 1st point is ok then might be you are not executing the MASS correctly, Try MASS for any other feild like payment term.
Please dont mind, I am just looking for possibilities.
Please also cross check the MRP details of your materials.
Regards,
MT

Similar Messages

WBS ELEMENT UPDATION THROUGH ML82N

While entering service entry sheet through ml81n there is a one file WBS ELEMENT.
How this field will update in GL of FI Module?

G/L account will be updated in back end, based on your assignment in P.O , if it is Service P.O manually created, if it is created from Project it will also update.

TECO Status in WBS ELement not allowing DP91 transaction for RRB

Hi Team,
I would like to look if DP 91 will not allow to Bill a particular cost once the project is in TECO Status.
Please confirm if this is configurable.
Regards
Vignesh R

Thanks for your clarification.
I have one more query which is not related to the Project status.
When a Dynamic item is being populated in DMR after DP91 transaction,the summarisation of material or activity takes place and If there are A(50$),B(25$),C(25$) are the materials posted and grouped to form Dynamic Item "Material" and E(100),F(50$),G(50$) are the activity posted and grouped to form Dynamic item "Labor" based on grouping set in material determination,
the DMR will reflect as
Line               item 10
Material         Material
Price             100$
Line                item 20
Material          Labor
Price              200$
My client need a report which would give a detailed list of Dynamic item along with quantity and value by just entering the Billing document number.
Like
Material
A   50$
B   25$
C   25$
Labor
A 100$
B 50$
C 50$
What are the tables I need to refer to bring up a report as stated above.
I couldnt get these details in AD01DLI and AD01DLIEF
Regards
Vignesh R

We want to post actual cost through statistical WBS elements.

when we do the posting on Costcenter assigned to a Statistical WBS element (2nd level), I was in the opinion that, the actual cost posted on the Costcenter of statistical WBS (2nd level) will reflect to the top WBS element (which is non-statistical in 1st level).
But, I cannot able to see the actual cost in the 1st level WBS which also a Billing element (with this, finally we want to do the Resource Related Billing).
So expalin me how to bring actual cost posted on the costcenter of a Statistical WBS, to top WBS element which is non-statistical.

U can book the actual cost from Procurement Cycle or by direct Invoice posting using FI transaction.
Procurement Cycle:
When you create PR or PO user Account Assignment Q or P and maintain WBS element. When u do GR or service entry actual cost is captured on the Project (WBS element).
Using FI Transaction:
When there is no PO and to book the cost u can use F-43 to post actual cost (via Invoice) and mention WBS element.
U can check the Actual Cost using Line item report CJI3 or S_ALR_87013532.
Venkat

Transaction to generate IDOC for WBS element

Hello All,
I have set up ALE DMV using BAPI (BAPI_PROJECT_SAVEREPLICA, ALE message type PROJECT) for sending the WBS element.
Object used is WorkBreakdownStruct and the method is SAVEREPLICA.
I have generated the partner profiles successfully and ALE-BAPI interface exits.
But when I create a new WBS element what is the transaction used to genearte an IDOC?
For example: BD10 is used to send a material (genearte idoc) using MATMAS, similarly what is the transaction in the case of WBS?
Please let me know if I am missing anything.
Thanks,
Sandeep

Hi All,
I have solved it by myself.
Thanks,
Vinod

Custom fields not getting updated in Mass Maintenance-MM17

Hi,
I have created a custom field in MARC table and the data is getting updated to the MARC table through MM01/MM02 but it is not getting updated by MM17. I have checked the notes 44410, 576160, 414020 and 116311. I have done the following changes as per the sap notes.
1. Created a custom segment ZE1MARCM by copying the standard segment E1MARCM and added the custom field in that
    segment.
2. I have extended the IDOC 'MATMAS03' and added the custom segment ZE1MARCM to E1MARAM.
3. Created a new entry in we82 and provided the extension type 'ZMATMAS03' and release '701'.
4. Adjusted the partner profile in we20 for matmas with port and providing the extension idoc type.
5. Added the custom field in the table MASSFLDLST.
6. Implemented the code in BADI 'MG_MASS_NEWSEG' and exits 'EXIT_SAPLMV01_002' , 'EXIT_SAPLMV02_002' as per the
    sap notes.
The custom field is not getting updated through mass maintenance. Please let me know if i have missed anything?
Thanks,
Geeta

I had this same question several years ago. Please check my answer at Initialize MARC Custom Fields Using MM17 Does Not Work

How to see revenue posted to a WBS element ?

Hi
How to see posting in a WBS element ?
Kindly provide transaction code or menu path.
Rajesh

Hi,
Menu path is
SAP Menu - Logistics - PS- Information System - Financials-Revenue and Earnings - Hierarchical Or By Cost Element
You can see various reports in this.
Regards,
Amit

Runtime Error Project/WBS Element

Hello,
I am getting a Runtime error (statement message 'E') every time i search in the match code for either a Project or a WBS Element, regardless of what transaction they appear in.
Can anyone help me with this?
Stephen

Did you make any changes to the project coding masks? This error could happen as result in changes to the mask. Project numbers which were valid as per earlier masks may not be fit as per new masks.
If above is a reason implement the note 453280 - Conflicting coding mask and project/WBS element
Regards
Sreenivas

Extract in a file all deleted PROJECTS and WBS element

hello everyone,
i need to create a file wich contain all projects and wbs element deleted by the transaction CJ20 , but i dont know how to pick those data once someone is trying to delete.
please help.
thank you.

hello everyone,
i need to create a file wich contain all projects and wbs element deleted by the transaction CJ20 , but i dont know how to pick those data once someone is trying to delete.
please help.
thank you.

Enable fields in ME21N/ME22N(WBS Element & Network)

Hi, need your help!
How to enable the fields WBS Element and Network in transaction codes: ME21N and ME22N?
Thanks in Advance

Hi,
You can implement BADI ME_PROCESS_PO_CUST and implement the method FIELDSELECTION_ITEM. For srep by step process check below link. Thanking you.
how to keep wbs element field in display mode in me22n?

WBS element&Cost center required for Account 11111000000 Profit center 1234

Hi,
While realeasing the billing document we are getting the subjectted error.
We do maintain the cost centre in the sales order, however no idea about the WBS elemnt.
Pls help.
Regards,

For information, if you want to post any data to WBS element, the Account Assignment indicator should have been ticked which you can do in OPSA or try in T.Code CJ20N where you can input manually.
For more information on WBS element, go through this thread
[WBS Element |WBS Element]
thanks
G. Lakshmipathi

Changing Status Profile for WBS Element

Hi Freinds,
How can we change the Status Profile for the WBS Elements.
say for Eg : need to chage status Profile Z0000005 to Z0000008
where they reflect in DB Table JSTO for OBJNR in filed STSMA
Please suggest me the function modules or BAPIs
Thanks in Advance,
Ganesh

hi,
try the below given link
[Changing Status Profile for WBS Element|Update WBS element;
hope this helps
Regards
RItesh J

How to update WBS Element in already posted FI documents

Hi All,
I would like the procedure to update the WBS element in already posted Finance documents. We have Fund center is also activated in our system.
Kindly suggest the procedure for the same please.
Thanks and Regards,
Sarvendra Negi

Hello,
All PS_PSP_PNR fields, as COBL-PS_POSID are dependent on the
project settlement. By posting a document you can enter the fields
independent of the fact, whether the project settlement is active or
not. Only the field status is crucial. As soon as such a document is
changed, the activity of the project settlement is relevant.
If it's active, these fields must not be changed in general.
Otherwise you would get a inconsistency between FI and CO, because
there is no interface updating the project settlement tables
In this case TBAER (transaction OB32) does not play a role anyway.
But if the project settlement is not active, the fields can be filled
informatively by posting the document. And thus there must be a
chance in FB02 to change them again. Therefore the settings of TBAER
are crucial and TCOBX must not be changed like in note 966428.
Furthermore the entries of TCOBX are used in the coding for different
queries. So it would be very critical to change these entries.
The only solution can be, that you adapt TBAER accordingly. In the
standard it is not possible.
BR,
Raquel

Standard Price Update fo WBS Element

Hi SAP Community,
For a free stock material I can update the standard price by transaction code CK11N and mark/release by CK24;
For a sales order stock material I can update the standard price by transaction code VA02;
But how can I update a standard price for a WBS element stock material??
Thanks & Regards,
Daniel.

Hi,
If your order in Based on the Sales Oder they you can carryout easy cost planning for sales order
why do u want to standard price to be updated to WBS element
Need some more clarity on your question
let me know your process. what is the strategy you are using.
Regards,
Raj

Return Order Credit Memo updation in WBS element

Hi,
I have an issue on the automatic updation of return order for WBS element, once the sales order is been assigned to the wbs and billing is done payment also made by the customer and wen the customer sends the return order stating that in those goods he wont require some goods than in sales cycle credit memo is done for the payment return to customer but is there any place where the wbs gets updated for the revenues deduction of the payment given back to customer where its has to be deducted................how to do this
Kindly help me doing this.
Thanks and Regards
Praveen B M

Hello,
Thanks for you reply and i just want to know that.
If we assign the return order to the WBS element, the credit memo automatically has the WBS element assigned to it or do we have to manually assign the credit memo to a WBS element? if yes how?
Thanks and Regards
Praveen B M

WBS element updation through MASS transaction

Similar Messages

Maybe you are looking for