WEB AS connection failed

Hi,
i have logon method in User management as SAPLOGON (since we have same userids in Portal as well as in BW systems) and issued the necessary parameters for WEB AS connection as :
WAS Description BW Development
WAS Host Name IP address:8000
WAS Path /sap/bw/bex
WAS Protocol http
Also gave the all necessary values in connector property.
Now if i go to Display - > Connection Test and select the following :
SAP Web AS Connection
Connection Test for Connectors
it is giving the following result:
Results
SAP Web AS Connection - Jan 1, 1970 7:27:40 PM
Test Details:
The test consists of the following steps:
1. Check that the system object defines an SAP system
2. Validate the following parameters: wap.WAS.protocol; wap.WAS.hostname
3. Check the HTTP/S connection to the defined backend application
Results
1. The system object represents an SAP system.
2. The following parameters are valid: wap.WAS.protocol (http) ; wap.WAS.hostname (ip address:8000)
3. HTTP/S connection failed. Make sure the protocol, host name, and user mapping are correctly defined.
Test Connection with Connector - Jan 1, 1970 7:27:40 PM
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection successful
Even though we dont want to do user mapping (we have similar userids in both ends as mentioned early), i went ahead and did that also, but still WEB AS is failing with above mentioned error.
Is there any specific patch level need to be there for BASIS or J2EE etc... we have BW 3.5(web as 640- ABAP System), EP 6.0 Patch 9.
Thanks

Hi ,
I have had this problem before . Even though you still got a failure while the connection test , actually whrn you use the system object it works .Pls chaeck all the your parameter are right before you use this object .
Thanks
Aneez

Similar Messages

Im running a web-based CMS, that cycles through a number of pages, and wanted to know if there is an auto reload code option ( not plug-in ) that can restart previous page when connection failed.

I am running a web-based CMS that cycles through a number of pages, each for different times ( ranging from 40 seconds to 2 minutes )and is displayed in a number of shops. Every now and then our internet drops, and the page errors with connection failed. I’m wondering if there is anyway to auto reload the page as soon as the error connection failed is showing. auto-reload addon is not an option as this will interrupt the sequence.
The following error was encountered: 
 
<ul><li>Connection Failed</li></ul> 
 
This means: 
 
<pre>

I am running a web-based CMS that cycles through a number of pages, each for different times ( ranging from 40 seconds to 2 minutes )and is displayed in a number of shops. Every now and then our internet drops, and the page errors with connection failed. I’m wondering if there is anyway to auto reload the page as soon as the error connection failed is showing. auto-reload addon is not an option as this will interrupt the sequence.
The following error was encountered: 
 
<ul><li>Connection Failed</li></ul> 
 
This means: 
 
<pre>

Test Connection fails for VC system of type Web Service

Hi All
I ve created a VC system of the type Web Service in Portal. In this VC system, I have given Url of the Enterprise Service that I want to use in VC.
(for eg: http://erp.esworkplace.sap.com/sap/bc/srt/wsdl/sdef_ECC_SALESORDER002QR/wsdl11/ws_policy/document?sap-client=800)
In the next step, I did user mapping for the VC user that will be consuming this Enterprise Service.
The system was created successfully but when I did Connection Tests , I got the following exception:
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection failed. Make sure that Single Sign-On is configured correctly
Do I need to do any more configurations before I can use such ES portal system in my VC work studio ?
I understand that I have provided little information about the exception thrown by Portal.
I kindly request you to feel free in asking any other details about the same.
Regards
Kapil S Kamble

Hi Natty
thanks for your immediate reply.
I followed your instructions and created iView of the type URL and set the fetch mode property to 'server side' as told.
Initially, I gave 'http://www.sap.com' as the Url and I was successful in opening the site.
Later, when I gave Enterprise Service url and tried to preview the iView, I got the following exception:
*'http://erp.esworkplace.sap.com/sap/bc/srt/wsdl/sdef_ECC_SALESORDER002QR/wsdl11/ws_policy/document?sap-client=800
Error # 401'*
I ll need to give username and password. But how do i give them as parameters?
Please note, these parameteres are appended to the Url. So, I fear that if url of Enterprise service is changed, then it wont open.
what do you think ?
Kapil

HTTP connection failed Web Clipping

Hi, I try to use webclipping to integrate content in portal but i am getting following error
An exception has occurred : oracle.portal.wcs.transport.http.HttpTransportException WCS-510 -- HTTP connection failed to URL http://www.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Daps&field-keywords=webcenter by method get
Any help please
Muhammad Nasir

Thanks lot sir for your kind reply. I have worked two days on this problem and just few moments ago I solved this problem.
I am not behind any proxy server I did following changes to provider.xml file in proxy section
<proxyInfo class="oracle.portal.provider.v2.ProxyInformation">

<proxyUseAuth></proxyUseAuth>
<proxyType></proxyType>
<proxyRealm></proxyRealm>
<proxyUseGlobal></proxyUseGlobal>
<proxyUser></proxyUser>
</proxyInfo>
commented first three tags and removed value from remaining tags.
I am following your book Oracle WebCenter 11g PS3 Administration Cookbook very well written :) . I have also embedded Google docs by following your book successfully but
on portal Google docs page is blank I dont know why.
Thank you,
Muhammad Nasir

Unable to connect to website losing connection and the result is displayed as Secure Connection Failed (Error code: ssl_error_access_denied_alert)

Secure Connection Failed
An error occurred during a connection to website name
Peer received a valid certificate, but access was denied.
(Error code: ssl_error_access_denied_alert)
# The page you are trying to view can not be shown because the authenticity of the received data could not be verified.
# Please contact the web site owners to inform them of this problem. Alternatively, use the command found in the help menu to report this broken site.

Still experiencing this problem and hoping someone may have some ideas to try on the server.

OS 10.4.4- Classic - I'm getting a "Connection Failed" Alert

This problem started out of the blue... running OS 10.4.4 with Classic, I'm getting an alert "Connection Failed This file served is running on your machine. Please access the volume and files locally." BEFORE Classic finishes loading. I click the "OK" button and all is well - UNTIL I print from Classic - then I get it again. (Mainly from Pagemaker 6.5) Sometimes when I click "OK", it just goes away, and the document prints... other times, it repeats and I have to take Classic out.
I have checked my Network settings, my Classic settings, and my Sharing settings - all to no avail.
HELP! This is driving me crazy! At some points, I have to reboot in OS 9.2.2, and run everything from there - YUK!
Hints, tricks, advice???

Well, with some minor changes, I've succeeded in getting my alert to go away.
I did all the usual stuff--ran cron scripts, repaired permissions (even OS 9), etc but without luck. Still got the alert when booting classic with extensions off so I figured the problem had to be on the OS X side of things. I stopped all file sharing services (personal, windows, web, etc) and rebooted classic--voila! No alert. I then turned on sharing services one at a time and rebooted classic with each change to check the effect. I was able to turn my original sharing services (personal and windows) back on without the alert returning.
I don't know why this worked, but hope it will work for you.
MDD Dual 1.25 G4 Mac OS X (10.4.5) Mac Mini, G4 Powerbook

SharePoint 2013 - PowerPivot - The following connections failed to refresh.

Thanks for taking a look. I have tried countless blogs and other forum posts and can't seem to resolve this.
I am working on SP2013 with SQL Server 2012 in a single farm environment. My domain is on another VM.
I am using interactive refresh. (Click Data > Refresh All Connections) from the PP Workbook in SharePoint.
The connection is embedded.
I am getting the error "We were unable to refresh one or more data connections in this workbook. The following connections failed to refresh: (Name of my connection). The connection is using windows authentication
What I have tried:
I have checked ULS Logs, nothing showing up unfortunately.
I checked local system messages on server, nothing there.
I changed both the PowerPivot and Excel Services application pools to run under Domain\Administrator
I changed both the PowerPivot and Excel Services unattended accounts to run under Domain\Administrator
Ran IISReset command from windows powershell.
Restarted SSAS Services
Verified the Server was registered in Excel Services (Data Model Settings)
Verified that data refresh was enabled on the PowerPivot workbook at the site collection level.
In central administration I set the business hours to 6am - 8am for data refresh so this would not be an issue.
I verified that the Secure Store Service is started in central administration
I have also ran SQL Server Profiler and all I see is this error, i'm not even sure it's related. Searching the error hasn't helped:
"The commit or rollback request cannot be completed because there is no active transaction in this session."
I verified that Claims to Windows Token Service is running in central administration.
I've tried editing the workbook connection to use specified accounts as well. When I do that I get the following error:
An error occurred while accessing application id SP2013\Administrator from the Secure Store Service. The following connections failed to refresh: (My connection name).
Any help or direction would be much appreciated. Thanks.

did you try below technet guide?
Unable to refresh data for a data connection in the workbook. Try again or contact your system administrator. The following connections failed to refresh: PowerPivot Data
also check this guy:
http://voices.yahoo.com/powerpivot-error-unable-refresh-data-data-11642048.html?cat=15
Are you using the office web apps?
https://blogs.technet.com/b/excel_services__powerpivot_for_sharepoint_support_blog/archive/2013/01/31/powerpivot-for-sharepoint-browser-refresh-fails-data-refresh-not-supported-in-office-web-apps.aspx
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Connection failed - The server "name" mayt not exist or it is unavailable..

I've been connecting my 24" iMac with my 15" MacBookPro either over the WiFi or via Ethernet for months to share hard drive space & to save time transfering files constantly.
But now, all of a sudden, I'm getting the following error message:
+*Connection Failed*+
+The Server "MacBookProName" may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again.+
After this, I succeded in being able to connect via Share Screen and via Web Sharing. It is only not working when I access through finder. Also, it's not letting me click on "Connect As..." so I can't check if it's entering the correct info too.
Both Macs are 10.6.6 and both have software fully updated.
Help!?

Fixed.. Was firewall settings on the MacBookPro

"ERROR_DESTINATION_INVALID: Web deployment task failed" when trying to deploy site

I'm working on our CI process for auto-publishing WebJobs along with a host WebSite for said jobs. This isn't working, but that's not the point at the moment.
The site in question is called devpandajobhost.azurewebsites.net and I have created (and deleted
and recreated) and published to this site successfully many times, from both msbuild and VS.
However, earlier today, my publish commands have started failing with
C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\Web\Microsoft.Web.Publishing.targets(4253, 5): error ERROR_DESTINATION_INVALID: Web deployment task failed. ( Could not connect to the remote computer ("devpandajobhost.scm.azurewebsites.net"). Make sure that the remote computer name is correct and that you are able to connect to that computer. Learn more at: http://go.microsoft.com/fwlink/?LinkId=221672#ERROR_DESTINATION_INVALID.)
or (from vs)
Error 4
Web deployment task failed. ( Could not connect to the remote computer ("devpandajobhost.scm.azurewebsites.net"). Make sure that the remote computer name is correct and that you are able to connect to that computer. Learn more at: http://go.microsoft.com/fwlink/?LinkId=221672#ERROR_DESTINATION_INVALID.)
0 0
JobHost
It looks like the scm site for my site doesn't exist. I have tried deleting and recreating my site several times, through various different mechanisms (VS new project, portal, powershell). The site can be created but when I publish to it I get the error
above.
What is going on?
PS my theory is that I deleted and recreated it and the Azure internal DNS server has got in a pickle

it is not only internal Azure DNS but your DNS provider as well. Since DNS records are propagated and cached (and negative cached as well) you need to wait for some time for negative cache to expire.
I see no good reason to go through the cycle of creating new site every time unless this is your scenario. If so you can delete the old one and create always sites with new name.
Galin Iliev [MCSD.NET, MCPD], http://www.galcho.com

Calculations in Xcelsius using data generated by a Web Service Connection

Hi,
I have set up a web service connection to pull in 4 columns of data: 1. CATEGORY 2. SUBCATEGORY 3. PRODUCT TYPE   4.#OFCALLS. There will be anywhere from 1 to 500 rows of data depending on day of week and time of day. The web service sorts the list by #OFCALLS descending. The OUTPUT VALUES of the web service connection are mapped to cells A19:D518.
Formulas in the spreadsheet take the Top 10 from the list and populate it to cells A4:D13. A formula in cell D15 sums the #OFCALLS for the entire web service connection output (A19:D518).
The data in A4:D15 is mapped to a spreadsheet table on my canvas.   When the report generates, the data from the TOP 10 of the web service connection populates properly, but the cell that should reflect the TOTAL#OFCALLS (D15) shows zero.
Is it not possible to do additional calculations in the spreadsheet based on data generated by the web service connection? A major difference between using an XML Map and a Web Service Connection is the XML Map actually populates the spreadsheet with the new data when it is refreshed. The Web Service connection data never actually appears in the spreadsheet itself, even though it updates to the appropriate vessel on the canvas.   This makes me think that no additional calculations can be done in the spreadsheet based on the web service connection data.
Can anyone tell me if that is correct? If so, then the web service connection would also have to pull in the TOTAL#OFCALLS along with the other data.   This would also seem to greatly limit what you could do with data generated by a web service connection, so I am hoping I am wrong and just don't understand how to do this.
Can anyone clarify this for me? If I failed to give any pertinent info let me know what it is, and I will update my post.
Thanks!

I have seen similar behavior as well. I have live data coming into Xcelsius from a data connection.
A supported Excel formula
=IF(ISBLANK(J2),I2,VALUE(TODAY()-J2))
is then applied to one of the columns to create an additional derived column.
Taking a snapshot of the data shows that the derived column is being populated, however the controls I've tried hooking up to the derived column (charts and labels) are always empty.
Information on whether this is supported would be appreciated.
Thank you,
David

The connection was reset + Secure connection failed

Hello, I am using firefox on the web and I keep encountering the same error message that the connection was reset when I try to access webpages. Following the article at https://support.mozilla.org/en-US/questions/1024256 did not solve the problem as it only fixed it for google.com and no other website, however when I hold down shift and reload the page it will reload, sometimes in basic html. Operating in safe mode will bring up these pages in basic text without graphics.
Sometimes, it will instead show the message Secure Connection Failed for trusted websites such as news agencies.
I have disabled my themes and add-ons but the problem still persists.
I woud like some guidance on how to go about fixing this problem. Thanks! :)

Check the date and time and time zone in the clock on your computer: (double) click the clock icon on the Windows Taskbar.
Check out why the site is untrusted and click "Technical Details" to expand this section.
If the certificate is not trusted because no issuer chain was provided (sec_error_unknown_issuer) then see if you can install this intermediate certificate from another source.
You can retrieve the certificate and check details like who issued certificates and expiration dates of certificates.
*Click the link at the bottom of the error page: "I Understand the Risks"
Let Firefox retrieve the certificate: "Add Exception" -> "Get Certificate".
*Click the "View..." button and inspect the certificate and check who is the issuer of the certificate.
You can see more Details like intermediate certificates that are used in the Details pane.
If "I Understand the Risks" is missing then this page may be opened in an (i)frame and in that case try the right-click context menu and use "This Frame: Open Frame in New Tab".
*Note that some firewalls monitor (secure) connections and that programs like Sendori or FiddlerRoot can intercept connections and send their own certificate instead of the website's certificate.
*Note that it is not recommended to add a permanent exception in cases like this, so only use it to inspect the certificate.
Boot the computer in Windows Safe mode with network support (press F8 on the boot screen) as a test to see if that helps.
*http://www.bleepingcomputer.com/tutorials/how-to-start-windows-in-safe-mode/

SharePoint SiteMialbox failed with 503 error (AutoDiscover.svc web service call failed)

SharePoint SiteMialbox failed with 503 error (AutoDiscover.svc web service call failed)
I followed Technet articles to configure SiteMailBoxes in our environment & exchange sever.
When we created Sitemailbox in a SiteCollection &when we try to open it, it failed with below error.
Site Mailbox
We are having trouble connecting to Exchange Server
The server might be temporarily unavailable. Please check back on this page in a few minutes. If this problem persists, please contact your system administrator.
Correlation ID: bb0fe99c-6f4e-e084-b191-881fbf0fa977, Error Code 10
ULS Log (503 error)
Autodiscover Diagnostics Response Headers: request-id: 95d12ceb-283e-4495-b28b-256503fd097c client-request-id: 742fe69c-ef5a-e084-ca05-6098c759c584 X-CalculatedBETarget: devapwxyz01a.devap.mydomain.com X-FEServer: DEVNAABCD01B
Content-Length: 0 Cache-Control: private Date: Tue, 03 Feb 2015 18:53:40 GMT Set-Cookie: X-BackEndCookie=; expires=Sun, 03-Feb-1985 18:53:40 GMT; path=/autodiscover; secure; HttpOnly Server: Microsoft-IIS/8.5 X-AspNet-Version:
4.0.30319 X-Powered-By: ASP.NET
742fe69c-ef5a-e084-ca05-6098c759c584
if I am correct, X-CalculatedBETarget supposed to be DEVNAABCD01B.devna.mydomain.com but it connected to different domain devapwxyz01a.devap.mydomain.com. Do you guys have any idea on this? (I verified
the same using fiddler, it is failing right at autodiscover.svc call.)
I wrote a powershell script to connect autodiscover service in sharepoint server & this web service call able connect right server X-CalculatedBETarget. It gave the expected response.
I am not sure why SharePoint webservice call (X-CalculatedBETarget) is going to different server?
let me know if you guys have any ideas.
Thanks.

Thanks for the Response Raj.
I already followed the same instructions in the Links.
When SharePoint Autodisover.svc webservice send a request to Exchange server & Exchange server redirecting that request to different server, this is the problem i am facing right now.
X-CalculatedBETarget
supposed to be DEVNAABCD01B.devna.mydomain.com but it connected to different domain devapwxyz01a.devap.mydomain.com.
Let me know if you have any suggestions?

Secure connection failed in version 37.0.1 but works in all other browsers and firefox 36

https://mail.twcbc.com/ will not load. The is Time Warner's business class web email.
The specific message is:
Secure Connection Failed
The connection to mail.twcbc.com was interrupted while the page was loading.
The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
Please contact the website owners to inform them of this problem.
This page loads in IE 11 with all recent patches, and in Chrome. Also it will load in Firefox 35 and 36. This issue is specific to 37.0.1

''cor-el [[#answer-715299|said]]''
<blockquote>
You need the full domain: mail.twcbc.com
</blockquote>
Thank you, that fixes it.

Received "Connection Failed" Notice Any Recommendations

Started to have problems downloading mail. Some mail appeared along with the following notice:
"Connection Failed: There may be a problem with the mail server or network. Check the settings for account 'mail.mac.com' (I did, settings ok). The server error was: Mail was unable to verify the identity of this server, which has a certificate issues to 'mail.mac.com'. The error was: An SSL error occurred while trying to read data from the server 'mail.mac.com'. Verify that this server supports SSL and that your account settings are correct. You might be connecting to a computer that is pretending to be 'mail.mac.com', and putting your confidential information at risk."
I check my mail on the .Mac web site and it was the same mail that finally arrived on my computer.
Any suggestions?

I believe my problem was a systems issue that was resolved.

Java.io.IOException: open HTTP connection failed

I got this error message when trying to load applets in a web page, with J2SDK_Forte:
==================================
load: class myClass.class not found.
java.lang.ClassNotFoundException: myClass.class
     at sun.applet.AppletClassLoader.findClass(AppletClassLoader.java:151)
     at sun.plugin.security.PluginClassLoader.findClass(PluginClassLoader.java:189)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
     at sun.applet.AppletClassLoader.loadClass(AppletClassLoader.java:112)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:262)
     at sun.applet.AppletClassLoader.loadCode(AppletClassLoader.java:478)
     at sun.applet.AppletPanel.createApplet(AppletPanel.java:548)
     at sun.plugin.AppletViewer.createApplet(AppletViewer.java:1621)
     at sun.applet.AppletPanel.runLoader(AppletPanel.java:477)
     at sun.applet.AppletPanel.run(AppletPanel.java:290)
     at java.lang.Thread.run(Thread.java:536)
Caused by: java.io.IOException: open HTTP connection failed.
     at sun.applet.AppletClassLoader.getBytes(AppletClassLoader.java:224)
     at sun.applet.AppletClassLoader.access$100(AppletClassLoader.java:40)
     at sun.applet.AppletClassLoader$1.run(AppletClassLoader.java:141)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.applet.AppletClassLoader.findClass(AppletClassLoader.java:138)
     ... 10 more
==================================
The applet is in the same directory as the ASP. It is a NT 4 (SP6) server. The applets loaded and ran fine with jdk1.3. Do I need to do something different in my ASP, or IIS setup to allow java applet HTTP connection in JDK1.4?
Thanks!

I have the exact same problem but have yet to find a solution.
It works fine in 1.3 but fails occasionally in 1.4. If I refresh the browser several times it eventually
loads.
Scott

WEB AS connection failed

Similar Messages

Maybe you are looking for