Web Service Timeout & connection errors

Using jwsdp 2, i have developed a client that has a timeout property set. How are timeouts processed? Is an exception thrown by the port? or does the web method just return with a null return value?
I also have noticed that in simulating a connection error (by stopping my app server) that an exception is thrown by the web method? but the exception is a javax.xml.ws.WebServiceException. How do I distinguish connection errors from other exceptions? what other exceptions are there?
Basically, where is this info documented?

Hello Vipul
Enter the RZ10 and validates the TIMEOUT value of parameter "icm/server_port_<x>" for  PROT=HTTP and PROT=HTTPS.
For example, the HTTP service is on port 0 and TIMEOUT=600 seconds
icm/server_port_0 = PROT=HTTP,PORT=80$$,PROCTIMEOUT=600,TIMEOUT=600
in your case, increasing the TIMEOUT and validates the WS again
regards
Juan

Similar Messages

  • HP Web Services Setup - Connection error. Check Internet connection.

    I am trying to enable HP Web Services but Connection error. Check Internet connection. .
    I use static ip with Preferred DNS Address: 8.8.8.8 and 8.8.4.4 and it does not work.
    I changed to DHCP also it does not work.
    I have a ZTE home modem router connected to the printer.
    This question was solved.
    View Solution.

    Hi MaBek,
    Can you check if your printers IP address is valid.
    If you have a laptop or PC connected to the same network, open a browser and type the IP address in the address bar and hit enter. 
    This should open a Embedded web Server page if the IP address is valid.
    Here you can navigate to Web Services tab and click on enable to enable web services.
    Regards,
    Oliver
    "Although I work for HP, I'm speaking for myself and not on behalf of HP"--Please mark the post that solves your problem as "Accepted Solution"
    "Say "Thanks" by clicking the Kudos Star in the post that helped you.

  • Infopath 2013 SOAP Web Service Data Connection - Error: The file is not a valid XML file

    Here are the steps to replicate the issue I’m having when adding lists.asmx or any other SharePoint web service in InfoPath 2013. This web service opens fine in the browser from my desktop. My account is a farm administrator and is added to the
    web application’s User Policy.  I can use these services just fine using Nintex 2013 Workflow.
    Open InfoPath Designer 2013.
    Select Blank Form and click Design Form button.
    Click “Data” tab.
    Click “From Web Service” and select “From SOAP Web Service”
    Enter https://mysiteurl.com/_vti_bin/lists.asmx?WSDL for the web service definition.
    Click Next.
    Windows Security window pops up.
    Enter a credential. I tried both my account and the farm account. My account is a farm admin and is added to the web application’s User Policy with Full Control.
    Click OK. It prompts for credential multiple times.
    I get below this error messages: 
    Sorry, we couldn't open https://mysiteurl.com/_vti_bin/lists.asmx?WSDL
    InfoPath cannot find or cannot access the specified Web Service description.
    The file is not a valid XML file.
    Not enough storage is available to process this command.
    We have a project that is in need of these services using InfoPath so any help is greatly appreciated.

    Hi Brian_TX,
    For your issue, try to the following methods:
    Change your service binding in web.config to:binding="basicHttpBinding". It seems in VS it defaults to wsHttpBinding.
    Replace all instances of "parameters" from the web service wsdl with the name "parameter"
    There are some similar articles about the issue, you can have a look at them:
    http://www.infopathdev.com/forums/t/23239.aspx
    https://social.msdn.microsoft.com/Forums/office/en-US/621929c3-0335-40af-8332-5a0b430901ab/problems-with-infopath-web-service-connection?forum=sharepointcustomizationprevious
    https://social.msdn.microsoft.com/Forums/en-US/5fa5eca8-f8d7-4a2e-81ba-a3b4bdcfe5af/infopath-cannot-find-or-cannot-access-the-specified-web-service-description?forum=sharepointcustomizationlegacy
    Best Regards
    Lisa Chen
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]

  • Web Services Server Connection Error

    Although I was able to add my printer to hpeprintcenter successfully, after a few hours it was showing disconnected.  When I pressed refresh I received a popup saying my printer had been removed.  After clicking ok on the popup my printer was still listed and it's state was disconnected.  Some advice I read suggested I disable Web Services from my printer's menu and renable it which would give it a new email adddress.  I disabled it, but now when I try to enable Web Services the printer displays "Server Connection Error There was a problem connecting to the Server. Touch retry to connect again, or OK to Exit.".  I have retried multple times for the last 12 hours with no success.  Any suggestions?

    I don't want to jump to that conclusion just yet. When you set the static IP from the front panel of the printer, did it let you set a static DNS? The static DNS is the important part of that step. If it didn't let you set the static DNS, go into the printer's EWS by typing it's IP address into a web browser. Set the printer to use Google's DNS (Preferred = 8.8.8.8 : Alternate = 8.8.4.4). Once you set the static DNS, power down the printer and router. Turn the router back on first and let it stabilize before turning the printer back on. It normally takes a minute or two for a router to stabilize. Let me know what happens.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • Web Services problem - Connection error. Check Internet connection. - 1102w

    Hello!
    When i try to enable Web Services Setup i get  "Connection error. Check Internet connection." error message. I tried to do manual and automatic IP Address Configuration.
    Picture:
    If you have any idea what should i do, please help me!
    Thank you!
    Benyke

    I did the firmware update utility.  Says my firmware is up to date.  Still get error.

  • Consume Web Service In Coldfusion Error

    I'm having a problem using cfinvoke or adding this web service url in the coldfusion admin.
    <cfinvoke returnvariable="returndata" webservice="http://www.fortedata.com:8080/axis2/services/FdsWebService?wsdl" refreshwsdl="yes" method="PostData">
    I get the error for cfinvoke
    "Cannot generate stub objects for web service invocation. "
    "Name:
    http://www.fortedata.com:8080/axis2/services/FdsWebService?wsdl. WSDL:
    http://www.fortedata.com:8080/axis2/services/FdsWebService?wsdl. java.io.IOException: ERROR: Missing element inFault "SQLException" in operation "SQLException", in binding GetRates It is recommended that you use a web browser to retrieve and examine the requested WSDL document to ensure it is correct. If the requested WSDL document cannot be retrieved or is dynamically generated, it is likely that the target web service has programming errors. "
    and in the administrator
    ""Error creating web service. Please ensure that you have entered a correct Web Service name or URL.""
    The url is 
    http://www.fortedata.com:8080/axis2/services/FdsWebService?wsdl
    page loads fine in a browser...
    I do see an issue being brought up here in the wsdl, but I have no idea why...this isnt my wsdl btw..
    <wsdl:operation name="GetRates">
    <wsdl:input message="ns:GetRatesRequest" wsaw:Action="urn:GetRates"/>
    <wsdl:output message="ns:GetRatesResponse" wsaw:Action="urn:GetRatesResponse"/>
    <wsdl:fault message="ns:SQLException" name="SQLException" wsaw:Action="urn:GetRatesSQLException"/>
    </wsdl:operation>
    line 3
    any ideas?
    Thanks for any help...

    Sorry didnt post everything for the sake of space
    I just ended up using .NET to deal with the service..CF just didnt even recognize the url as a valid web service let alone care if I was passing arguments to it.
    On a side note, CF admin doesnt recognize the url as a web service and dreamweaver doesnt recognize the url as a web service either.
    <cfinvoke method="PostLead" returnvariable="returndata" webservice="http://www.fortedata.com:8080/axis2/services/FdsWebService?wsdl" refreshwsdl="yes">
    <cfinvokeargument name="SpecVersion" value="0">
    <cfinvokeargument name="ForteId" value="TESTID">
    <cfinvokeargument name="AuthKey" value="guestauthenticationkey">
    <cfinvokeargument name="LastName" value="0">
    <cfinvokeargument name="FirstName" value="0">
    <cfinvokeargument name="Address" value="0">
    <cfinvokeargument name="city" value="0">
    <cfinvokeargument name="state" value="0">
    <cfinvokeargument name="zip" value="0">
    <cfinvokeargument name="year" value="0">
    <cfinvokeargument name="vin" value="0">
    <cfinvokeargument name="make" value="0">
    <cfinvokeargument name="model" value="0">
    <cfinvokeargument name="phone" value="0">
    <cfinvokeargument name="crdate" value="0">
    <cfinvokeargument name="listcode" value="0">
    <cfinvokeargument name="odometer" value="0">
    <cfinvokeargument name="dually" value="0">
    <cfinvokeargument name="commercial" value="0">
    <cfinvokeargument name="convvan" value="0">
    <cfinvokeargument name="coverage" value="0">
    <cfinvokeargument name="term" value="0">
    <cfinvokeargument name="deduct" value="0">
    <cfinvokeargument name="av" value="0">
    <cfinvokeargument name="gps" value="0">
    <cfinvokeargument name="wt" value="0">
    <cfinvokeargument name="sg" value="0">
    <cfinvokeargument name="emis" value="0">
    <cfinvokeargument name="fintype" value="0">
    <cfinvokeargument name="finterm" value="0">
    <cfinvokeargument name="downpay" value="0">
    <cfinvokeargument name="cuscost" value="0">
    <cfinvokeargument name="paymeth" value="0">
    <cfinvokeargument name="cc" value="0">
    <cfinvokeargument name="expdt" value="0">
    <cfinvokeargument name="ccid" value="0">
    <cfinvokeargument name="routing" value="0">
    <cfinvokeargument name="banacct" value="0">
    <cfinvokeargument name="checking" value="0">
    <cfinvokeargument name="fbdt" value="0">
    <cfinvokeargument name="promo" value="0">
    <cfinvokeargument name="timeofday" value="0">
    <cfinvokeargument name="prefmeth" value="0">
    <cfinvokeargument name="email" value="0">
    </cfinvoke>

  • Web Services/BPEL - Connection Refused Error

    I am getting the following error while invoking this web service (in JDev 10.1.2) from Oracle BPEL console...
    faultSubcode: faultString: java.net.ConnectException: Connection refused: ..............
    Did anyone face the same error...pleaseeee help!!!

    where is your web service deployed?

  • Can a Web Service be Connected to XI for Capturing Error Messages?

    Hello,
    Several years we developed a Web Service from Sap to Sharepoint. The issue is that we often get an "Error at Target of Invocation" intermittently. The first thing we do of course is to make sure the SAP connection password has not expired. Also, whenever mapping is changed we use the Web Service to create a new WSDL file that is compatible. Importantly, we assume that the connection from a Sharepoint is being made, because to run one of the processes from Sharepoint, while connecting to SAP, there is  no problem. However, when we run a different process that uses the same Sharepoint to SAP connection, we get the error at target of invocation message.
    The .NET developer will sometimes recycle the Sharepoint process that clears the cache, and for now, we think, that may be the issue. Still we are not positive, and this message does not reveal the real issue. Is there a way to connect the Web Service to XI to capture any issues in between the two systems that would uncover what the real issue is?
      Thanks, Tom M.

    Hi Tom,
    AFAIK  We can raise alerts in PI system , if any messages fail for the interface (PI to .Net Webservice). But if any connection issue occurred , Receiver server will be having more information/log traces why exactly connection occurred. I will recommend to get the trace from receiver system (Server on which Webservice was hosted) and analyze the trace and find the root cause.
    Thanks
    Hari.

  • My envy 110 works but the web services and eprint services give "connection error". what to do?

    My family use  Macs and Apple Deskbook and a BT Homehub network. The HP troubleshooting instructions do not always match what is on computer screen. The menu paths that HP gives sometimes do not exist.
    The Envy 110 printer was working fine but it often could not be found by the computers so I followed HP instructions to set a Static IP Address on the Printer. But now the Web Service and ePrint Service give a "connection error".    Any suggestions? I am annoyed that HP don't give a phone number to help.

    When you set that static IP on the printer, make sure of 2 things:
    1. The IP address is outside the DHCP range of the router.
    2. Use an external DNS, like Google DNS: 8.8.8.8 and 8.8.4.4
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Error trying to set up web services/HP Connections (ePrint) for HP Envy 5530

    I have been trying to set-up my new Envy 5530 printer and I can get the printer, computer, and wireless network to communicate with each other. However, when I try to get the printer and network to talk to each other to set up Web Services and HP Connections, the printer tries to download the latest product updates and has a server error saying it cannot connect to the server It wants me to check the connections or set a proxy server address. Also, when I try to get a claim code printed, I run into this same issue. Help!!

    Hello Woodpeckyr,
    Welcome to the HP Support Forums!
    I see that you are trying to setup Web Services on your ENVY 5530 but are unable to connect to the server. A colleague of mine as worked with this issue here: Envy 5530 Web Services
    Please review the steps afforded and give them a try. Hope this helps, cheers.
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Web service timeout

    When i communicate with external system using web service call, i can transafer 3500 record. if i run it for more than 3500 records it gives error "SOAP:1,023 SRT: Processing error in Internet Communication".
    i tried to use SM59, HTTP connection to external server. current set up is ICM Default timeout..
    I want to change but rfc destination is generated and i dont have option to change it to "no timeout" or specify timeout.
    you help is appreciated. .

    Hello Vipul
    Enter the RZ10 and validates the TIMEOUT value of parameter "icm/server_port_<x>" for  PROT=HTTP and PROT=HTTPS.
    For example, the HTTP service is on port 0 and TIMEOUT=600 seconds
    icm/server_port_0 = PROT=HTTP,PORT=80$$,PROCTIMEOUT=600,TIMEOUT=600
    in your case, increasing the TIMEOUT and validates the WS again
    regards
    Juan

  • "JSR 172 Web Service Timeout"

    I have successfully used JSR172 and Sun's stub generator to access my web services and it works very nicely. The only hitch I see is that if for some reason ( not very likely but I'd like to handle it anyway ) the Blackberry client connects to the service by never receives a response, it appears to hang indefinitely.
    Is there a way to set a time out, since it doesn't seem to fall through normal error trapping
    I suppose I could kill the thread after a certain amount of time but that seems rude and would likely cause other problems
    This is at the point where the JSR172 Invoke api is called.
    thnx in advance...

    Hi,
    Check parameters *icm/server_port_<xx> *
    In my CRM system, I have setup :
    icm/server_port_0 = PROT=HTTP,PORT=80,TIMEOUT=90,PROCTIMEOUT=600
    The PROCTIMEOUT is the one interesting for you.
    I have set up it to 600 seconds to get the same timeout as with the sapgui.
    Check also rdisp/plugin_auto_logout but it is more useful for the webui than for web services.
    Regards,
    Olivier

  • Web service Timeouts

    Version                   :     Informatica 9.6.1 Hot Fix 1Installation Server    :   AIX server Informatica workflow reads records from an Oracle table and makes a web service calls. I am seeing the below error message in the session log. Time out defined in the connection object is 450s (7.5 min).  Need you inputs in understanding the timeouts i am seeing in the session log. The job runs in 4 partitions and i see few transactions getting dropped as well during this web service calls. Open Issues1. Where does this timeout enforced? In the application level the request completes before 7 mins.2. Why does Informatica drops requests while making web service calls (partition is pass through). Session Log ErrorTRANSF_1_2_4> PMWS_33016 [ERROR] Web Service invoker encountered an error while invoking the Web Service. Reason: Operation timed out after 60014 milliseconds with 0 out of -1 bytes receivedTRANSF_1_2_4> CMN_1761 Timestamp Event: [Wed Jul 15 04:05:19 2015]TRANSF_1_2_4> PMWS_33016 [ERROR] Web Service invoker encountered an error while invoking the Web Service. Reason:TRANSF_1_2_4> CMN_1761 Timestamp Event: [Wed Jul 15 04:06:19 2015]TRANSF_1_2_4> PMWS_33016 [ERROR] Web Service invoker encountered an error while invoking the Web Service. Reason: Operation timed out after 60069 milliseconds with 0 out of -1 bytes received

    Hi all, Please help me with metadata query to extract each session RUN_DURTION, Start Time, end time for last 10 runs of each session at a workflow level. I know we can get information from REP_WFLOW_RUN table but i dont know table strucure and I dont have access to Repository database and we need an exact query to raise it to admin team. so please provide me an exact query.   Thanks

  • C# Web Service Proxy - Autogenerated Error

    Hi all,
    I'm trying to consume a SAP Webservice in a C# console application within Visual Studio 2005. I've added the web reference to the WSDL and as such Reference.cs has been automatically generated. My problem is that I'm receiving two different errors at multiple different locations within this file.
            /// <remarks/>
            [System.Xml.Serialization.XmlElementAttribute(Form=System.Xml.Schema.XmlSchemaForm.Unqualified)]
            public string Type {
                get {
                    return this.typeField;
                set {
                    this.typeField = value;
    On the line System.Xml.Serialization.XmlElementAttribute(Form=_System_._Xml_.Schema.XmlSchemaForm.Unqualified) (Surrounded by square brackets, I'm not sure how to escape the hyperlink code), I'm receiving the following errors respectively:
    System - An object reference is required for the nonstatic field, method, or property 'WSTest.dotnetWS.Bapiret2.System.get'
    XML - 'string' does not contain a definition for 'Xml'
    I'm not sure why, as this code has been automatically generated, that I'm receiving these errors, is there something that I need to change in order to rectify this problem?
    Thanks,
    Cal

    Thanks André, yes it was the same error.
    While I wasn't able to solve the clash of the Bapiret2 field SYSTEM with the .NET keyword System, I negated the problem by creating my own structure with the fields I needed (did not need the system field).
    So now my program compiles and runs, however - when I try to use the program, that is; i try to invoke the function module the WS is connected to, I receive the following error:
    System.InvalidOperationException: Namespace prefix ' SOAP-ENV' not defined
       at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadFaultCode(XmlReader reader)
       at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadSoapException(XmlReader reader)
       at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
       at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
       at WSWinApp.dotnetWebService.service.ZcalGetPdets2(ZcalGetPdets2 ZcalGetPdets21)
    My understanding of SOAP isn't that great but my first idea is that I think the WSDL may need a <SOAP-ENV:Envelope /> tag somewhere, although that's just a guess.
    If anyone could shed some light on how to solve this problem or even where to look it would be greatly appreciated.
    Thanks in advance.
    Cal

  • Using InfoPath and the Web service GetUserProfileByName-An error occurred accessing a data source

    Hi, Everyone,
    I want to realize the function that when user fills out the infopath form the form can automatically get current users' name and I've searched that I can use the Web service GetUserProfileByName method. When I preview the form it is all right, however, when
    I fill the form online, it occurs this error as folllowing. Anyone knows why and how to solve this problem?
    Thanks forward!
    Warning
    An error occurred querying a data source.
    Click OK to resume filling out the form. You may want to check your form data for errors.
    Hide error details
    An error occurred while trying to connect to a Web service.
    An entry has been added to the Windows event log of the server.
    Log ID:5566
    Correlation ID:9c23d39c-18fa-1025-c7ec-600a1582a54a

    Hi,
    According to your post, my understanding is that you get error when using the Web service GetUserProfileByName in InfoPath.
    Have the InfoPath form template call web service in code? If yes, please see following KB and check if it is the cause.
    http://support.microsoft.com/kb/981684
    You can also
    follow the steps in the article to resolve this error in InfoPath. Please refer to:
    Auto Populate User Information in InfoPath with Claims Based Authentication in SharePoint – Part 2 of 3
    In addition, you need to disable the Loopback check.
    Here is a similar thread for your reference:
    https://social.technet.microsoft.com/Forums/en-US/d6d20308-a5d0-45fa-881d-0626c68c4e73/infopath-an-entry-has-been-added-to-the-windows-event-log-of-the-server-logid-5566?forum=sharepointcustomizationprevious
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

Maybe you are looking for