Webutil_File_Transfer.DB_To_Client with different result
hi
Forms 10.1.2.3
i use in Forms this function to Downlaod BLOBs
Webutil_File_Transfer.DB_To_Client
('H:\l.xml',
'T_DEV_ARCHIV',
'dar_xml_blob',
'dar_id=110874')
In the BLOB are German letters inside ü, ä, ö ..
Result on two Clients:
at the first client the result looks good
On the other Client I’m missing the German letters.
Why the transfer is different? What has to do with the client?
BLOB's are binary files !!!
I just despair.
Edited by: alinzenb on 04.03.2013 13:16
Yes, but did you add a characterset definition to your XML file, and does the data stored in the XML match this characterset?
If you have e.g.
<?xml version="1.0" encoding="windows-1252" ?>But the data in the blob is actually UTF-8 encoded you have a Characterset-Problem, as the XML parser will treat your (UTF-8 data) as windows-1252 data...
cheers
Similar Messages
-
Siri comes up with different results than google maps
I was doing a search for Food Lion through Siri but she wasn't finding the one right around the corner from my house. I went into maps and it found it no problem. Why do they come up with different results? I thought Siri searched google maps.
Because Apple maps is NOT google maps.
-
Has any one experienced issues with iCloud synchronisation and contacts over two or more devices? The primary machine is an iMac running Lion. Address Book was created from vcf file (backup of address book prior to moving to iCloud). iTouch replicates Contacts just fine and matches the Address Book on the iMac. The iPad 2 does not showing only 123 contacts where there should be 200. I have turned off iCloud on both devices thus erasing the iCloud content of both devices and staring from scratch with both devices with identical results. Even turned off iCloud on the iMac and erased the Address Book and rebuilt with the same results. Anyone have any ideas or suggestions? I am going nuts.....
To follow-up with this issue:
I ended up performing a security wipe on my device. The security wipe finished, and I was about to reconnect with Exchange when I decided to visit our host's web site to see if they had any articles covering the issues I was experiencing. While they didn't have anything specific, I did find a step-by-step guide to connecting a BB10 device to Exchange... and right there at the end, it said "Do NOT enable memo sync."
I contacted support, and the rep told me that OS 10 has an issue with memo sync and it can cause all sorts of unpredictable behavior. Now, whether or not this is accurate I can say this: So far, the device is not disconnecting and reconnecting like it was before. Problem is, is this a result of not enabling memo sync, or is this a result of the security wipe?
I may have overlooked it, but I don't recall reading anything about that anywhere else. I'm tempted to try re-enabling the memo sync to see if everything blows up again. At least that way I can see for myself if the memo sync is a real issue. Of course, perhaps it's an issue with SherWeb (our host) specifically. Hm...
Anyway, for those that were interested, and for those that may come along in the future with a similar situation, the strange behavior that I first reported is no longer happening. I just don't know if it was a result of a security wipe or a result of not enabling memo sync with Exchange.
Ian -
Same circuit twice with different results
I've been having some trouble having Multisim match a circuit I have modeled in MATLAB. During the troubleshooting process I put voltage probes on each wire used. The circuit portion in question involves an AC Voltage source connected to a resistor which is then connected to an inductor. I made a copy of the circuit and started from scratch. One of the circuits gives a voltage drop across the resistor, while the other one doesn't drop any voltage at all. I've checked all of the connections and they are all good. The only difference I can see is that one has the pins labeled 1 - 2 while the other is 2 - 1. Does anyone know what the problem is here? I shouldn't not be getting two different results for the same circuit.
Hi Jmerc,
Maybe you can post the circuits so that we can compare.
Tien P.
National Instruments -
In vs. Exists with different results
Hi all
I have a general question
Are there any cases where using the exists operator can produce different results/amount of results
Vs. using the IN operator ?
If yes please post an Example
the reason that i'm asking this it's because the exists returns true if the subquery returns at least one row and
it doesn't continue to check , but IN check all the values ,
this is critical for me to know , if i need to returns the amount of rows etc.
Thanks In advanced
Naama
Edited by: naama on Jun 21, 2011 11:52 PMHi,
naama wrote:
Hi all
I have a general question
Are there any cases where using the exists operator can produce different results/amount of results
Vs. using the IN operator ?
If yes please post an Example I don't believe that's really your question.
The answer to the question above is: Yes, of course. Most of the time, EXISTS and IN will produce different results. For example, this query returns 3 rows:
SELECT dname
FROM scott.dept
WHERE deptno IN (
SELECT deptno
FROM scott.emp
;but this query produces 0 rows:
SELECT dname
FROM scott.dept d
WHERE EXISTS (
SELECT NULL
FROM scott.emp
WHERE sal = d.deptno
;Try again; what really is your question?
An important difference between EXISTS and IN is that EXISTS always returns TRUE or FALSE, but IN can return any of the 3 logical values: TRUE, FALSE or UNKNOWN. When you say "WHERE condition_1" in a query, the row is included if condition_1 is TRUE, and the row is not included if condition is either FALSE or UNKNOWN. That means you can have situations where these two conditions:
WHERE deptno IN (subquery_a)always produces the exact same results as
WHERE EXISTS (subquery_b)but
WHERE deptno NOT IN (subquery_a)always produces the exact same results as
WHERE NOT EXISTS (subquery_b)for the exact same subqueries. That's because it's possible for neither
"IN (subquery_a)" or
"NOT IN (subquery_a)" to be TRUE, but either
"EXISTS (subquery_b)" or
"NOT EXISTS (subquery_b)" will always be TRUE.
Review SQL's 3-valued logic. NOT UNKNOWN is the same as UNKNOWN. -
Two queries against aud$ with different results
hi guys
I'm not so good with queries and that is the reason for my question:
We have audit activated and we want to get the following information (monthly):
- how many times the user logon to database.
- every logon of each user in a month.
For the first (1) requirement we have the following query:
select USERID "Cuenta", USERHOST, TERMINAL, nombres||' '||PRIMER_APELLIDO||' '||SEGUNDO_APELLIDO "WhiteList"
, count(*) "TOTAL"
from aud$, ab.usuarios
where (ACTION# = 100) and
(NTIMESTAMP# between (to_date(to_char('01092013 00:00:00'),'ddmmyyyy HH24:MI:SS'))
and (to_date(to_char('30092013 23:59:00'),'ddmmyyyy HH24:MI:SS'))) and
USERID = CODIGO_USUARIO(+) and
USERID not in ('DBSNMP','SYSMAN')
group by USERID, USERHOST, TERMINAL, nombres||' '||PRIMER_APELLIDO||' '||SEGUNDO_APELLIDO
order by USERID, USERHOST, TERMINAL;
the result of this query shows like this:
Header 1
Cuenta USERHOST TERMINAL WhiteList TOTAL
ASEGUR MAQUINADIAB\SSSSS IUOOO PEPITO GARCIA Y GARCIA SOCIED 10
ASEGUR POSADASDE\MNNN4550094 MNNN4550094 PEPITO GARCIA Y GARCIA SOCIED 1
ASEGUR POSADASDE\YUMI YUMI PEPITO GARCIA Y GARCIA SOCIED 10
ASEGUR YUH PEPITO GARCIA Y GARCIA SOCIED 20
ASEGUR SDFRG PEPITO GARCIA Y GARCIA SOCIED 13
ASEGUR signy PEPITO GARCIA Y GARCIA SOCIED 29
ASEGUR sigurd PEPITO GARCIA Y GARCIA SOCIED 32
ASEGUR valhalla-Legacy PEPITO GARCIA Y GARCIA SOCIED 12
ADMIN MAQUINADIAB\SSSSS IUOOO USUARIO ADMINISTRADOR NETWORKING 3
SPRINGUSR bragi 98
SPRINGUSR hermod 59
SPRINGUSR YUH 49
So, is the total logons in a month by user.
for the second requirement we are using the follow query:
select USERID "Cuenta", USERHOST, TERMINAL, to_char(NTIMESTAMP#,'YYYYMMDD HH24:MI:SS') "Fec Ing", nombres||' '||PRIMER_APELLIDO||' '||SEGUNDO_APELLIDO "WhiteList"
--, count(*) "TOTAL"
from aud$, ab.usuarios
where (ACTION# = 100) and
--to_char(NTIMESTAMP#,'dd-mm-yy')=to_char(sysdate-50,'dd-mm-yy') and
(NTIMESTAMP# between (to_date(to_char('01062013 18:00:00'),'ddmmyyyy HH24:MI:SS'))
and (to_date(to_char('30062013 23:59:00'),'ddmmyyyy HH24:MI:SS'))) and
USERID = CODIGO_USUARIO(+) and
USERID not in ('DBSNMP','SYSMAN')
group by USERID, USERHOST, TERMINAL,to_char(NTIMESTAMP#,'YYYYMMDD HH24:MI:SS'), nombres||' '||PRIMER_APELLIDO||' '||SEGUNDO_APELLIDO
order by USERID, USERHOST, TERMINAL;
Header 1
Cuenta USERHOST TERMINAL Fec Ing WhiteList
USER12 DOMINIODDD\IOIPOP IOIPOP 20130930 12:08:33 ANGEL ROBERTO GARCIA Y GARCIA S
USER12 DOMINIODDD\IOIPOP IOIPOP 20130930 14:28:47 ANGEL ROBERTO GARCIA Y GARCIA S
USER12 DOMINIODDD\IOIPOP IOIPOP 20130930 16:24:43 ANGEL ROBERTO GARCIA Y GARCIA S
so, shows each logon done by user in a month.
But in the both queries, the results are different. It is not suppose that they have to be the same number of logons?
I mean, If I sum the numbers in TOTAL column I have less that I get in the second query. Always !!!
could you help us?
thank youYour timeframes are different:
(NTIMESTAMP# between (to_date(to_char('01092013 00:00:00'),'ddmmyyyy HH24:MI:SS'))
and (to_date(to_char('30092013 23:59:00'),'ddmmyyyy HH24:MI:SS'))) and
versus
(NTIMESTAMP# between (to_date(to_char('01062013 18:00:00'),'ddmmyyyy HH24:MI:SS'))
and (to_date(to_char('30062013 23:59:00'),'ddmmyyyy HH24:MI:SS'))) and -
Linking 2 text boxes with different results
Hello
I am trying to Link a drop down box with names, to a text field containing the relative identification of that person,
Here is what I am trying to do.
The drop down would have and the result in the linked text box
Richard 123456
Steve 654321
Jerry 125874
Fred 987542
I have attached a screen shot with some graphics
How can I do this please?
Thanks in advanceThank you so very much I will give it a go I am totally new to theis program.
Sorry for asking more but.
If the Dropdown has the names and once they have selected the name using the dropdown, I would like the texbox called "Certificatenumber" to associate the name with the correct number, how do I link the boxes.
Any chance of a couple of screen shots.
Sorry I am so bad on this I just started with forms like the other day.
Thank you for your time everyone.
(Thank you MarkWalsh) -
Project 7 - Pop menu magic 2 - 1 template with different results
I just noticed something strange on my website.
I only use 1 template which should normally give the same result on all pages.
However on 4 pages the menu bar is split into 2 row. All other pages are correct as per template.
Here is the link for the correct page : http://www.lotolux.com/media.html
And here are the links of the 4 pages with the error.
http://www.lotolux.com/biography.html
http://www.lotolux.com/actingcareer.html
http://www.lotolux.com/burbank08concert.html
http://www.lotolux.com/london08concert.html
Can somebody help me solving this?
Many thanks
MartineAnd it becomes more stranger.
I recreated those 4 pages using the template. I copied and pasted all info from the old pages onto the new ones.
The new pages have the same name - I only added 2 at the end.
http://www.lotolux.com/biography2.html
http://www.lotolux.com/actingcareer2.html
http://www.lotolux.com/burbank08concert2.html
http://www.lotolux.com/london08concert2.html
They are uploaded and the error is gone. BUT BUT BUT BUT BUT ....................if I update the P7 -PMM2 menu bar ......the error is back there.
It is a mystery to me and get frustrated from it. Uploaded without linked in the menu bar = all ok, but if the link is made = back to zero. -
Sandpit and Dev give Address search with different results using Web UI
Using the Sandpit system I can perform a BP search on Street and enter the post code, but it still finds the right address. However, in our development sytsem it does not. The FM which performs the search is identical so I assume this would be down to some kind of address related config?. Can anyone enlighten me further as what could possible cause this?.
Jason
[RESOLVED]
Edited by: Jason Stratham on Sep 8, 2009 11:35 AMOkay. So, I asked the admin to create a scope for the list, which they did following the steps outlined in Ben Tedders article, and then I followed the steps in the rest of the article setting up the web parts. When I ran a search, it returned the no results
page. Not sure why, but I removed the scope from the Search Core Results web part, and the search returned usable data from the list.
Here's my part ii question - - how do I customize the Search Core Results web part to display the data from the search in manner that makes more sense than from a list of nondescript layout of,
Search Result
Search Term ... dataField01 ... dataField02 ... dataField03 ... dataField04 ...
author info
url info
to something a tad more informative, such as,
You search for Search Term, with the following results:
Search Result
dataField01 label ... dataField01
dataField02 label ... dataField02
dataField03 label ... dataField03
dataField04 label ... dataField04
because nobody's really going to care who uploaded the list or want to link to the data pulled from the list in one of those columnar results tables. -
Disjointed Rollovers with different results
Hi,
In Dreamweaver CS4 I'm trying to do a disjointed rollover that swaps one image on mouseover and restores it on mouseout (a simple navigation bar rollover) and swaps a second image onclick and doesn't restore the original (an image in the main content area). Right now both images restore on mouseout:
http://inkllusionist.com/test
I realize I may be going about this the wrong way... any advice? Should I try to do this with something other than the javascript behaviors?
...Later...
Well, after more searching I found the answer in a very nice video on youtube.
http://www.youtube.com/watch?v=hN_MhdmtCsM&feature=colike
It explains that you set the simple rollover using the behavior "Set Nav Bar Image" and you do the main image swap using the behavior Swap Image and set that to <A> onClick and uncheck Restore images on Mouseout. It's so simple when ypu know how. lol.> Is it possible for me to create a disjointed rollover so
that when I mouse
> over
> one image it will make another image switch to a .SWF
file?
Not in any easy way that I can think of.
> How can I make an image switch to something else when I
mouse over a
> totally
> different image?
Behaviors: swap image
-Darrel -
Group Policy with different Results
I have Server2008 and Win 7 and Win8.1 clients
I created the GPO in fact my Fellow made the modifications in the default group policy that Deny the USB or any removable media
He exempted the Users in GPO's Delegation Tab and and select apply group policy as deny.
Since I removed that policy. Still users cannot access the USB even that the policy is removed
I have tried everything on Clients to update that GPO
gpupdate /force , gpupdate /sync and the USB still not updated
I backup the Default GPO and in the GPO folder I found the These files
its mean that the Policy is still Exist
I want to enable the USBs kindly update me
RegardsHi,
Did you use custom ADM Administrative template to disable the usb?
If the answer is yes, it is considered a preference rather than a true policy and will tattoo the registry of client computers with its settings. If this template is moved out of scope of the
Group Policy which applies it, the registry changes it makes will remain.
If you wish to reverse the settings made by this template, simply reverse the options to re-enable the drivers.
For more detailed information, you can refer to the following links:
HOWTO: Use Group Policy to disable USB, CD-ROM, Floppy Disk and LS-120 drivers
http://support.microsoft.com/kb/555324
Besides, since sever 2008, we can use admx template to disable the usb.
For more detail information, you can refer to the following link:
Active Directory: How to Block USB Devices
http://social.technet.microsoft.com/wiki/contents/articles/1699.active-directory-how-to-block-usb-devices-dsforum2wiki.aspx
Best Regards,
Erin -
"select count(*)" and "select single *" returns different result
Good day!
product version SAP ECC 6.0
oracle10
data transfers from external oracle db into customer tables using direct oracle db link
sometimes I get case with different results from 2 statements
*mytable has 10 rows
*1st statement
data: cnt type I value 0.
select count( * ) into cnt from mytable WHERE myfield_0 = 123 and myfield_1 = '123'.
*cnt returns 10 - correct
*2nd statement
select single * from mytable WHERE myfield_0 = 123 and myfield_1 = '123'.
*sy-dbcnt returns 0
*sy-subrc returns 4 - incorrect, 10 rows are "invisible"
but
1. se16 shows correct row number
2. I update just one row from "invisible" rows using se16 and 2nd statement returns correct result after that
can not understand why
thank you in advance.Thank you, Vishal
but,
general problem is that
1. both statements have the same WHERE conditions
2. 1st return resultset with data (sy-dbcnt=10), 2nd return empty dataset, but must return 1 in sy-dbcnt
Yes, different meaning, you are right, but must 2nd must return 1, because of "select single *" construction, not 0.
Dataset to process is the same, WHERE conditions are equal...
I think the problem is that how ABAP interperets select count(*) and "select single *".
Maybe "select count (*)" scans only PK from index page(s)? and "select single *" scans data pages? and something is wrong with that?
I'm new in SAP and didn't find any SAP tool to trace dump of data and indexes pages with Native SQL.
se16 shows all records.
And why after simple manual update of just one record using se16 "select single *" returns 1?
I've just marked one row to update, didn't change any data, then pressed "save". -
Bridge CS6 - Smart Collections Different Result Everytime
I recently was using a Smart Collection to review selects and I would come up with different results as I openend and closed folders that were a part of Smart Collection file base. Its as if my files hadn't been correctlty indexed or were not being indexed until I opened a folder and selected a file to view.
Is there a way to make sure my files are being indexed or is reseting the Prefs the only way to do this?You can either visit each folder and wait until the spinning arrow is finished indexing, which takes awhile.
Another way is to do a search at the start of the directory (it searches down) and check include non-indexed files. You can see what folder it is on in the lower left corner. THis will take awhile also, but you can do the search when you are not using the computer and just let it run. If you have to stop it before it is done, note where it is at and then start search there next time. -
WEBUTIL_FILE_TRANSFER.DB_To_Client crashes on Linux with SP2
Hi there,
I'm using the command WEBUTIL_FILE_TRANSFER.DB_To_Client and it crashes on Linux Application Server 10.1.2.2.0.
It's working on Linux Server 10.1.2.0.2 and also on Windows.10.1.2.2.0!!!
Any ideas or experiences?
Thanks a lot!
Regards,
GerhardThanks for your answer, we are running with JRE 1.5.0_09 and this is the last output in the console window:
2007-Dez-27 08:47:57.120 WUI[getProperty()] Getting property WUC_BEAN_VERSION
2007-Dez-27 08:47:57.120 WUI[getProperty()] Value of WUC_BEAN_VERSION=10.1.2.2
2007-Dez-27 08:47:57.151 WUT[setProperty()] Setting property WUC_SRV_LOGGING to 2
2007-Dez-27 08:47:57.151 WUT[setProperty()] Setting property WUC_GET_LOCAL_PROPERTY to syslib.jacob.dll
2007-Dez-27 08:47:57.151 WUT[getProperty()] Getting property WUC_GET_LOCAL_PROPERTY
2007-Dez-27 08:47:57.151 WUT[getProperty()] Value of WUC_GET_LOCAL_PROPERTY=1.0
2007-Dez-27 08:47:57.167 WUT[setProperty()] Setting property WUC_GET_LOCAL_PROPERTY to syslib.JNIsharedstubs.dll
2007-Dez-27 08:47:57.167 WUT[getProperty()] Getting property WUC_GET_LOCAL_PROPERTY
2007-Dez-27 08:47:57.167 WUT[getProperty()] Value of WUC_GET_LOCAL_PROPERTY=1.0
2007-Dez-27 08:47:57.182 WUT[setProperty()] Setting property WUC_GET_LOCAL_PROPERTY to syslib.d2kwut60.dll
2007-Dez-27 08:47:57.182 WUT[getProperty()] Getting property WUC_GET_LOCAL_PROPERTY
2007-Dez-27 08:47:57.182 WUT[getProperty()] Value of WUC_GET_LOCAL_PROPERTY=1.0
2007-Dez-27 08:47:57.198 WUB[setProperty()] Setting property WUC_SRV_LOGGING to 2
2007-Dez-27 08:47:57.198 WUL[setProperty()] Setting property WUC_SRV_LOGGING to 2
2007-Dez-27 08:47:57.198 WUO[setProperty()] Setting property WUC_SRV_LOGGING to 2
2007-Dez-27 08:47:57.198 WUS[setProperty()] Setting property WUC_SRV_LOGGING to 2
2007-Dez-27 08:47:57.198 WUH[setProperty()] Setting property WUC_SRV_LOGGING to 2
2007-Dez-27 08:47:57.198 WUF[setProperty()] Setting property WUC_SRV_LOGGING to 2
2007-Dez-27 08:47:57.198 WUI[setProperty()] Setting property WUC_SRV_LOGGING to 2
2007-Dez-27 08:47:57.198 WUI[setProperty()] Setting property WUC_SRV_LOGGING to 2
2007-Dez-27 08:48:01.401 WUF[setProperty()] Setting property WUF_GFN_DIRNAME to $WINDIR$
2007-Dez-27 08:48:01.401 WUF[setProperty()] Setting property WUF_FILENAME to export.csv
2007-Dez-27 08:48:01.401 WUF[setProperty()] Setting property WUF_FILTER to Alle Dateien (*.*)|*.*|
2007-Dez-27 08:48:01.401 WUF[setProperty()] Setting property WUF_GFN_MESSAGE to Datei speichern unter
2007-Dez-27 08:48:01.401 WUF[setProperty()] Setting property WUF_GFN_MULTISELECT to 6i
2007-Dez-27 08:48:01.401 WUF[setProperty()] Setting property WUF_GFN_SAVEFILE to
2007-Dez-27 08:48:01.682 WUF[gfnDialog run()] Creating Custom File Filter : Mask=*.*, Label=Alle Dateien (*.*)
2007-Dez-27 08:48:01.682 WUF[gfnDialog run()] Save File mode
2007-Dez-27 08:48:07.542 WUF[gfnDialog run()] Selected Directory: C:\Dokumente und Einstellungen\gerhards\Eigene Dateien\ Selected File: lin_sp2_export.csv
2007-Dez-27 08:48:07.557 WUF[setProperty()] Setting property WUF_FILENAME to C:\Dokumente und Einstellungen\gerhards\Eigene Dateien\lin_sp2_export.csv
2007-Dez-27 08:48:07.557 WUF[setProperty()] Setting property WUF_FILE_ATTRIBUTE to 1
2007-Dez-27 08:48:07.557 WUF[getProperty()] Getting property WUF_FILE_ATTRIBUTE
2007-Dez-27 08:48:07.557 WUF[getProperty()] Value of WUF_FILE_ATTRIBUTE=FALSE
2007-Dez-27 08:48:07.557 WUT[getProperty()] Getting property WUT_MAX_BYTES
2007-Dez-27 08:48:07.557 WUT[getProperty()] Value of WUT_MAX_BYTES=16384
2007-Dez-27 08:48:07.620 WUF[setProperty()] Setting property WUF_FILENAME to C:\Dokumente und Einstellungen\gerhards\Eigene Dateien\lin_sp2_export.csv
2007-Dez-27 08:48:07.620 WUF[setProperty()] Setting property WUF_FILE_ATTRIBUTE to 4
2007-Dez-27 08:48:07.620 WUF[getProperty()] Getting property WUF_FILE_ATTRIBUTE
2007-Dez-27 08:48:07.620 WUF[getProperty()] Value of WUF_FILE_ATTRIBUTE=FALSE
2007-Dez-27 08:48:07.620 WUF[setProperty()] Setting property WUF_FILENAME to C:\Dokumente und Einstellungen\gerhards\Eigene Dateien\
2007-Dez-27 08:48:07.620 WUF[setProperty()] Setting property WUF_FILE_ATTRIBUTE to 4
2007-Dez-27 08:48:07.620 WUF[getProperty()] Getting property WUF_FILE_ATTRIBUTE
2007-Dez-27 08:48:07.620 WUF[getProperty()] Value of WUF_FILE_ATTRIBUTE=TRUE
2007-Dez-27 08:48:07.620 WUT[getProperty()] Getting property WUT_STATUS
2007-Dez-27 08:48:07.620 WUT[getProperty()] Value of WUT_STATUS=FREE
2007-Dez-27 08:48:07.620 WUT[setProperty()] Setting property WUT_FILE_INFO to C:\Dokumente und Einstellungen\gerhards\Eigene Dateien\lin_sp2_export.csv|15646|N6iDateitransfer...|Fortschritt
oracle.forms.net.ConnectionException: Forms-Session <73> abgebrochen: Kommunikation mit Runtime-Prozess nicht möglich.
at oracle.forms.net.ConnectionException.createConnectionException(Unknown Source)
at oracle.forms.net.HTTPNStream.getResponse(Unknown Source)
at oracle.forms.net.HTTPNStream.doFlush(Unknown Source)
at oracle.forms.net.HTTPNStream.flush(Unknown Source)
at java.io.DataOutputStream.flush(Unknown Source)
at oracle.forms.net.StreamMessageWriter.run(Unknown Source)
java.io.EOFException
at java.io.DataInputStream.readUnsignedByte(Unknown Source)
at oracle.forms.engine.Message.readDetails(Unknown Source)
at oracle.forms.engine.Message.readDetails(Unknown Source)
at oracle.forms.net.StreamMessageReader.run(Unknown Source) -
I get different result when I paste with mouse and shift+ins
Sometimes I get different result when I paste the clipboard content with mouse and shift+insert key combination. Why? What can I do to stop this annoyance?
Just to add a little to the above, there really is no universally applied standard (not even close) for how the primary, secondary, and clipboard buffers should be used. Any X program can use them however they wish. But there are some common patterns: selected text should be placed in the primary buffer, and X pastes from the primary buffer with either middle click or shift-ins by default.
This default can (and unfortunately often is) overriden by clipboard managers - I don't know why they don't stay true to their name and just manage the clipboard buffer, but they often don't.
<mini rant>with no clipboard tools installed, selected text in any program I have is in the primary selection, and shift+ins or middle click paste from this primary selection. Ctrl-C/Ctrl-V post to/from the clipboard buffer. No need for extra tools. If I install any clipboard manager, this default sanity of X11 goes strait to s(&*Y. I don't like clipboard managers </mini rant> <mini praise> X11 is great without any of that cruft added </mini praise>
Last edited by Trilby (2013-06-15 03:12:39)
Maybe you are looking for
-
Please help. I have a Mac Book Pro ( late 2007- A1226) that I want to install Windows 7 ultimate on. I have boot camp 3.0 and I can set up the partition but when i click start installation, I get a black screen ( for a few seconds) then it goes to
-
Has anyone with Windows successfully set up "Accounts" disk file sharing?
I bought an Airport Extreme basestation (the one with Wifi-N and gigabit ethernet)a few days ago and set it up on the network. So far the wifi part has been nice - the range and speed (and stability) are a lot better than the Belkin draft-N wifi I ha
-
Type not displaying correctly when publishing
I have a Flash MX file which I created a couple of years ago. I edited it (in MX) and when I published the .swf, the type only displayed every other letter or so. Any one know what the problem is and how to fix it. The type face was Avante Garde Ital
-
List of unused Material Masters
Hi All, I would like to know the process to view the material masters which have not been used so farin my SAP System.i.e with that i not made any sales,Purchases and transfers. Please suggest the Proper T-Code for viewing the same. Thanks, Vinay
-
IOS 5 workaround?? Neebie needs help testing a theory
Hello, please excuse my ignorance in advance, but I need help with the installation of iOS 5. I know coutless users have been having issues downloading iOS 5 since it's release however I'm glad to say that the download wasn't an issue with me. My pro