What are the possible reasons for a procedure to go into uncompiled state?

hi,
we are working on a warehousing project where in we have a set of procedures that run every day to fetch the data from the source and populate it into the target. For the past few days some of these procedures are going into un-compiled state even though nobody has touched these procedures for a long time.
The behavior of these procedures is not consistent in the sence that when these procedures are run through the scheduler, these procedures are getting failed, where as when we run them manually they are working fine and subsequently when we try running them through the scheduler again they seem to be working.
following is the error message that is displayed when this procedures are failed:
ORA-04062: timestamp of package has been changed.
Kindly help me.
Thanks,
Raaji.

Thanks for the reply.
No, My procedure is not using any db links. And i have checked for remote_dependencies_mode, by using the below query and I got the VALUE as TIMESTAMP.
SELECT name, value
FROM gv$parameter
WHERE name = 'remote_dependencies_mode';
Do I need to change this value to SIGNATURE?
Thanks,
Raaji.

Similar Messages

What are the possible reasons for bill simulation fail on one day or

one period? Thanks.
ie:
Bill sim process flag is X in table ZET_SM_BIL_DAILY on a particular day or a particular short period.
Edited by: dan421 on Oct 24, 2011 11:23 PM

Hi,
There are many reason for faliur of bill simulation, can you please eloborate what error message you are getting.
Ritesh

What are the possible reasons for adobe flash player crashing constantly?

I utilize mixcloud, soundcloud,and podomatic on a daily basis, and recently have been having problems getting these three to play. I'm not certain if there is a clash between the various plug-ins within my mozilla firefox browser. The error messages that I have been receiving sometimes acknowledge the problem as a adobe flash player error, a shockwave flash player error, and sometimes as a flash blocker being enable in my browser, which keeps me from receiving any audio playback and the music from downloading onto the page. I'm constantly being asked to reload the page, or request a crash report. Has anyone encounter this problem? Help!

Uninstall BOTH Flash Player and Shockwave using the Control panel.
Reinstall both using Flash Player Plug-in (All other browsers)
and http://get.adobe.com/shockwave/
Reboot
In Firefox, click Tools>Addons
Check to be sure BOTH plugins are enabled and the LATEST version

What are the possible reasons why I cannot reactivate using my AppleID, even though I already change its password with the help of Apple personel

What are the possible reasons why I cannot reactivate my Iphone5 using my AppleID, even though I already change its password with the help Apple personel

If the password for your Apple ID works at id.apple.com > Manage Apple ID, then it's likely that the Apple ID the device wants you use is not the same as the Apple ID you are using.
Exactly what screen are you at on your iPhone? It sounds like it is in Activation Lock.

What are the possible values for the JOB status?

What are the possible values for the JOB status in the table TBTCP and significance for each?

Hi,
Have a look at include LBTCHDEF.
The standard include from SAP.
-> Definitions and Constants for Function group BTCH
Kind Regards
Raymond

What are the possible reasons why this R3 info not getting to BW?

Hi,
I have data coming into BW from R3 a datasource DataSorce1; When it gets to BW, SalesOrg numbers 22941 and 22942 comes to BW without problem but 22943 which is a new config. In the R3 master data does not get to BW.
1. What are the possible ways to troubleshoot this?
2. How can I confirm that the data shows in R3: i.e. showing my SalesOrg 22941 and 22942 in R3, and also confirm that 22943 truly exists in R3.
3. How do I confirm that 22943 did not get to BW (if it exists in R3)?
4. What if this is some custom program bringing 22941 and 222942 to BW? How do I see the program name and track down why the third one is not getting to BW?
Please provide the necessary to tcode in all the discussions
Thanks

1. 1st thing... If there is no Sales againest Sales Organization. you won't see in Cubes if it is part of Transactional Data. <u>Load New Sales Organization Texts</u>.
1. If it is new Sales Organization as Navigation Attribute only(Assume for Sales Order), try activate your master data for Sales Order. check in your Sales Organizatio IO Master Data and Sales Order Master Data
2. If it is Part of Transactional Data, Check in your RSA3, PSA.
How to check in RSA3?: If you are usng 2LIS_11_VAHDR. goto se16, provide VBAK table, press enter. in the Select for Sales Organization. Put 22943. Provide Order type Standard Order. and Execute. Take any Order Number from output list.
Goto RSA3, provide your choosen sales order in the RSA3 selection in Sales Order field Execute it.
If you are able to find this Sales Order in Both RSA3 and PSA. You are getting Data for 22943 Sales Organization.
case 1: If you are able to see Choosen Sales Order in RSA3, not in PSA. check User Exit Code.
case 2 : If you are able to see Choosen Sales in PSA and Not in Targets. check all transformation.
Are you working with Standard DS(2LIS_11_) or Custom Datasource(Z)?
Nagesh Ganisetti.
Assign points if it helps.

What are the possible approches for hosting a product(custom SP application) for multiple clients on a single SharePoint farm?

We have a product which is a custom application based on SharePoint Foundation 2010. Right now, for each of our client we create a dedicated server and host the application in the standalone deployment. Now, the requirement is to host multiple clients in a
farm deployment.
Challenges are: 1. The product has same name for the wsp that is deployed on different client servers as of now. How to distinguish for different clients on same farm
Currently the product specific css and jquery is in 14 hive. These files will be of difefrent versions for different client. How to segregate that?
How many web applications is recommend to be created in a single SPF 2010 farm? What are the challenges?
There are a couple of DBs created in SQL for the application. What is the best way to separate those for the client?
Essentially its the same product but with different versions for each client that we want to deploy in a single farm. What is the best practice to tackle this?

For the most part, these are not SharePoint questions per se, but product-specific questions you'd better ask the vendor about. To get in some more detail:
1. It totally depends on the scope of the solution. If its global, then you're out of luck and any changes you make affect all instances that use it. Better ask the vendor about it.
2. Not that many, let's say < 10, assuming you're web applications have separate application pools. Check out http://technet.microsoft.com/en-us/library/cc262787(v=office.14).aspx#WebApplication for
more info.
3. This is very application specific and really should be answered by the vendor. Not related to SharePoint at all.
4. Again, really depends on the product so better ask the vendor.
Good luck!
Kind regards,
Margriet Bruggeman
Lois & Clark IT Services
web site: http://www.loisandclark.eu
blog: http://www.sharepointdragons.com

What are the main reasons for SAP-HR Implementation Failures?

Dear Consultants,
Can some one shed the light on the following items:
1. At least 3 main reasons for failure of SAP-HR Implementations?

Hi,
Check this link
http://searchsap.techtarget.com/news/article/0,289142,sid21_gci892265,00.html

What are the possible values for a check box?

I'm trying to fill a pdf with a asp.net web form. I'm getting the text boxes filled ok, but I'm having trouble setting the check boxes. I am testing to see if a web form check box is checked. if it is, I tried to set the pdf checkbox value to "on". But this doesn't seem to be right.
My asp.net code is like:
If CheckBox1.Checked Then
af.SetField("pdfbox1", "On")
End If
Any suggestions?
Thanks

The value is the value entered into the "Export Value" option when the form is created. You can use the Acrobat JavaScript "exportValues" property to get the array of values for the same named check boxes. And if you know the 'widget' of the check box, you can use 'isBoxChecked' method to check if a given 'widget' is checked. More information is contained in the Acrobat JavaScript doucmentation.

The web developer toolbar wont load on my computer, what are the possible solutions?

when i click to download the toolbar now, firefox refreshes as it should be nothing happens.
maybe i dont see the toolbar? i cant find it.
what are the possible reasons its not downloading and what can i do?

Hey lydiabat10,
Thanks for using Apple Support Communities.
Looks like the iPhone won't allow explicit content on it. One thing you may want to look at is the Restrictions.
iOS: Understanding Restrictions (parental controls)
http://support.apple.com/kb/HT4213
Have a nice day,
Mario

What are the possible solutions..?

I have a column in a database table of type LONG RAW . This column was represented as an OLE Container - which in 10g is obsolete - in a form (Forms 6i). Trying to compile this form to Forms10g , I receive an error FRM-30454.
Is it possible to retain the form as it is , by simply change a property , ....
Anyway , What are the possible solutions for this kind of problem?
Thanks , Simon

Nice subject title. It is as good as "Urgent. Please help". Why don't you go back and edit your message and change the subject to something like:
Long Raw / OLE: 6i to 10g

My Personal Hotspot suddenly Stopped working..What is the possible reason??plzz reply ASAP

Please help me. I'm Switching on my Personal Hotspot option but still hotspot isn't getting ON. what are the possible reasons reply ASAP

iOS: Troubleshooting Personal Hotspot - Apple Support

I cannot log into facebook. I get the following message: 404 Error - Not Found The resource you have requested could not be found on the server. There are many possible reasons for this. Either the file does not exist, there is an error in your request,

I am not able to go to the facebook site. www.facebook.com is not working. I get the following error message. 404 Error - Not Found
The resource you have requested could not be found on the server. There are many possible reasons for this. Either the file does not exist, there is an error in your request, or the file is not accessible in the requested directory. Please verify that:
* You have used the proper case; requests ARE case-sensitive!
* You have entered the URL correctly. (i.e. proper directory/filename)
* You used the FULL URL. (i.e. proper file type: .html, .gif , .jpg, etc.)
* You use a tilde (~) before user directories. (i.e. www.furcen.org/~jurann/ )
* The user/file still exists on this server.
I also get redirected to "Busca Google" when typing www.facebook.com in the address bar.
== URL of affected sites ==
http://facebook.com; buscagoogle.com

I have the same problem and it does not have to do with firefox. Do you have any idea how to fix it through?

What are the possible cost objects for raw material consumption postings

what are the possible cost objects for raw material consumption postings. i want to know whether it can be work order(maintenance order).

For example, you are confirming a process order and issuing raw materials to the process order, the system in the background creates the consumption posting and will by default use the process order as a cost object.
Similarly, when you are issuing materials to a work order, you will use MB1A and with movement type 261 and the system prompts you to enter the order number. If you are using movement type 201, then the system prompts you to enter the cost center and so on.
Thanks,
Madhav Nanduri

What could be the possible reason for a deployed application to run slow after the target pc comes out of standby mode?

What could be the possible reason for a deployed application to run slow after the target pc comes out of standby mode? PC running XP and using the USB to communicate with the DAQ and driver boards. Application generated with 2010.
Thanks

Hello,
Usually default property is checked
system property -> devices ->usb root -> power management -> allow system to switch off device
Hope this help
Regards
Tinnitus
CLAD / Labview 2011, Win Xp
Mission d'une semaine- à plusieurs mois laissez moi un MP...
RP et Midi-pyrénées .Km+++ si possibilité de télétravail
Kudos always accepted / Les petits clicks jaunes sont toujours appréciés
Don't forget to valid a good answer / pensez à valider une réponse correcte

What are the possible reasons for a procedure to go into uncompiled state?

Similar Messages

Maybe you are looking for