What is model view, process code

hi, plz tell me what model view and process code

I am in ECC 5.0, in which no process code available for this. Process code is available for Inbound processing. You may have to create custom process code and write the code for populating IDOC segment data.

Similar Messages

What Message type and Process Code to use for Purchase Order Change in 4.6C

I like to implement in SAP R/3 4.6C a scenario for Purchase Order Change, via inbound IDoc.
I have been searching, but could not find what Message Type, Idoc Basic Type and Process Code to use.
I can not imagine this functionality does not exist in 4.6C.
Any suggestions for my problem are welcome.

Hello,
In this case you should use the message PORDCH and BAPI method BAPI_PO_CHANGE but only exist as of release 4.7.
Function module    BAPI_IDOC_INPUT1
Idoc Type              PORDCH01
Message Type      PORDCH
So check carefully the following OSS notes:
[Notes 589066 - BAPI_PO_CHANGE: Incorrect account assignment to network |https://service.sap.com/sap/support/notes/589066] (not be fooled by the description)
[ Notes 197958 - BAPIs for purchase orders - Missing Functions|https://service.sap.com/sap/support/notes/197958]
Regards,
Andrea
Edited by: Andrea Olivieri on Sep 3, 2009 10:17 AM

Model view (t-code- bd64) configuration issue

1) Is it possible with out distributing customer distribution model in outbound side ,can we receive idoc data in inbound side?
2) after distribution of model view in outbound side is it possibel to create filter techniqe in inbound side?
Thanks
Bhaskar Reddy

Hi,
1) Is it possible with out distributing customer distribution model in outbound side ,can we receive idoc data in inbound side?
- Yes, if is not MASTER data, probably you do not need to configure BD64 for outbound IDoc.
2) after distribution of model view in outbound side is it possibel to create filter techniqe in inbound side?
- You can filter in the Distribution Model easily. So you should use it for filtering data. Otherwise you need to filter it programmatically in some customer-exit.

Hi gurus i am learning what is distibution model, what is model view

hi gurus i am learning what is distibution model, what is model view

Distribution model describes the message flow between logical systems in an ALE scenario. It determines which messages are distributed to which logical systems.
You can define certain conditions (filters) in the distribution model to restrict the distribution (one when the message conforms to the filter the IDoc is sent.
In Distribution Model We will Define the Sender,Receiver and Message Types Exchanged Between then..While Creating Communication IDocs ALE will Consult the Distribution Model to determine the Receipents
Refer to the following tutorial for futher insights: ALE distribution
check the url's
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/ale/configuration.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapdevelopment.co.uk/training
And also u can get lots of inof from the below link.
http://www.sapgenie.com/ale/why_ale.htm
Reward points for useful Answers

Business Process Code?

Hello!
What is a Business Process Code? How can I define it in my SAP System? I have such situation: As soon as I press F8, I'll take error message: "Business Process Code XXXXXXXXXX is not defined". How can I configure it??
Thanks in advanced!!

SM30
Maintain View: V_EMMA_BPC

Purpose of Process code

Hi what is purpose of Process Code
I know there we add Msg type and Function module what is its function that function module will helps in getting the data
and *what abt Msg type* and Process code there

Hi,
R/3 uses the method of logical process codes to detach the IDoc processing and the processing function module. They assign a logical name to the function instead of specifying the physical function name.
Logical pointer to a processing method
The IDoc functions are often used for a series of message type/IDoc type combination. It is necessary to replace the processing function by a different one. E.g. when you make a copy of a standard function to avoid modifying the standard.
Easily replacing the processing method
The combination message type/IDoc will determine the logical processing code, which itself points to a function. If the function changes, only the definition of the processing codes will be changed and the new function will be immediately effective for all IDocs associated with the process code.
For inbound processing codes you have to specify the method to use for the determination of the inbound function.
After defining the processing code you have to assign it to one or several logical message types. This declaration is used to validate, if a message can be handled by the receiving system.
The inbound processing code is assigned analogously. The processing code is a pointer to a function module which can handle the inbound request for the specified IDoc and message type.
The definition of the processing code is identifying the handler routine and assigning a serious of processing options.
Processing with ALE
You need to click "Processing with ALE", if your function can be used via the ALE engine. This is the option you would usually choose. It allows processing via the ALE scenarios.
Associate a function module with a process code
Table TBD51 to define if visible BTCI is allowed
For inbound processing you need to indicate whether the function will be capable of dialog processing. This is meant for those functions which process the inbound data via call transaction. Those functions can be replayed in visible batch input mode to check why the processing might have failed.
WE41 Process code outbound creation
WE42 Process code inbound
Regds
Sivaparvathi
Please reward points if helpful............

Message type and Process Code for 940 IDoc

Hi,
what Message type and Process Code can be used for 940 IDoc when a SHPMNT05 IDoc is being used. We are using SHPADV message, SHPM process code for ASN. Can I use the SHPMNT message type for 940?
thanks,
Kumar.

should SD11 be the only process code to be used or can we use SHPM. I guess we can use both for shpmnt05. But how do I know which process code is more suitable for my purpose. is there any place where i can check that info?
Can we link SHPORD message type to a SHPMNT05 IDoc? i think this message type is more suitable.
thanks,
Kumar.

Question regarding Inbound process codes

When I look into WE64 (inbound process codes), I can see that some messages have only the following process codes:
- ABI_AIDN_IN
- ED00
- ED00_XML
- ED08
Can someone please tell me exactly what each of these process codes does? I can find very little information (and none of it helpful) about these process codes.
<REMOVED BY MODERATOR>
Thanks
Terri
Message was edited by:
Alvaro Tejada Galindo

Anji - thanks for your reply.
I've looked in WE42, and can see the entries. This still does not give me any additional information about how these process codes work. For example, I know that TXT1 is a process code tied to a workflow task that will process a TXTRAW01/02 idoc. The TXT1 process code is tied only to that IDOC. However, the process codes listed in my original message are tied to all inbound idocs.
Hence my original question, what exactly do these process codes do?
Thanks,
Terri

Inbound Process Codes for LOIWCS and LOIROU

We are trying do ALE for Workcenters and Routings using tcode: POIM.
What are the inbound process codes that i need to setup in the partner profile?
Thanks for the help.
Gopi.

Hi John,
thank you very much.
1. I created a new program which use program ROUTING_CREATE_SAMPLE_FILE to create a idoc.
*& Report ZALEROUTE
REPORT ZALEROUTE.
DATA: seltab    TYPE RANGE OF i,
           rspar     TYPE TABLE OF rsparams.
SELECTION-SCREEN BEGIN OF BLOCK selection WITH FRAME TITLE text-001.
   PARAMETERS: receiver LIKE tbdlst-logsys.
   rspar = VALUE #(
        ( selname = 'RECEIVER'
          kind = 'S'
          sign = 'E'
          option = 'BT'
          low = receiver ) ).
   SELECTION-SCREEN END OF   BLOCK selection.
   submit ROUTING_CREATE_SAMPLE_FILE VIA SELECTION-SCREEN with SELECTION-TABLE rspar.
2. In BD64 I created BAPI Object ROUTING Method Create
3. In BD64 I created Partner agreement via Enviroment
4. In WE42 I assigned message type routing_create to process code BAPI
Kind regards,
Herbert

What is a process code in ale idoc

what is a process code in ale idoc,what is the purpose of Process code.

Hi,
     Let me tell some scenario then u would be able to understand what a process code is-------
In ALE ie, the data requested system is receiver and the data already presented system is sender ie, from where we are having the data,
here in sender side----
       we need a program to tranfer required data into idoc--( idoc is just a data container )    in sender side this program logic is in a function module it is configured in we41.
         ie this will transfer the data from database to idoc----in sender side it is a process code
and in receiver side after receiving the data we have to post it in database again program needed it is also ie the required code is also in function module it is configured in we42
it is about receiver side f.m or simply process code
okkkkkkkkkkkk

What is the process code for Message type FUNDMA

Hi,
I am sending CO elements to the distributed server using ALE. Can somebody tell me what is the process code for the message type FUNDMA?
Thanks
William

Check entries of table VEDI_TMSG1. This contains Message types and associated Process codes.
Hope this helps.
ashish

What is the process code for message type FIXEDASSET_CREATE?

Hi all
please tell me that what is the process code for
MESSGAE TYPE = FIXEDASSEt_CREATE,
FUNCTION MODULE = IDOC_INPUT_FIXEDASSET_CREATE,
BASIC TYPE = FIXEDASSET_CREATE01 ?
thanx in advance.......
Edited by: Prachi Sharma on Jan 11, 2008 7:45 AM
Edited by: Prachi Sharma on Jan 11, 2008 8:03 AM

Hi,
Check the Tcodes WE41 and WE42 for Outbound and Inbound process codes
Check below Tables as well
EDE1T
EDE2T
EDE5T
EDE6T
TEDE5
TEDE6
Regards,
Satish

What is the Process code for IDoc SISCSO01

Hi all,
I am using 4.6c version.
I am going for an outbound IDoc SISCSO01 for sales Order confirmation.
I want the process code (we41) which suits this IDoc SISCSO01.
Can you please help to get the process code so that my IDoc can be sent succesfully.
Best Regards,
Gangolu

Hi Gangolu,
I don't think there is an outbound process code for IDoc type SISCSO01.
But you can generate the IDoc with this FM MCV_STATISTICS_ALE_OUT_ORDER. But you still need to setup partner profile, distribution model and etc.
Hope this will help.
Regards,
Ferry Lianto
Please reward points if helpful.

What is A process Code?

1.What is A process Code?
2. How to associate a process code with an output type ?

Hi
Process Code turn drives which Function Module to use,which in turn will determine the content of the message.
This link will be helpful for teh second query
http://logosworld.com/www7/EDI/HTML/IDocBook.htm

. What is a process code in ALE

. What is a process code in ALE
could u plz explain clearly

hi,
a process code represent function mod.,
Process code will come in to picture when you deal with IDOCS .. you need to assign a code which internally will have a Function module or a Include, that will have entire code to run your bussiness for an IDOC or EDI or ALE.
reward useful points,
siva
Message was edited by:
Shan

What is model view, process code

Similar Messages

Maybe you are looking for