What is reason of failed status and what is solution in rman
HI
what is reason of failed status and what is solution
select status from V$BACKUP_DATAFILE_DETAILS;
INPUT_TYPE STATUS START_TIME END_TIME Minutes
DB INCR FAILED 02/11/11 11:31 02/11/11 12:23 52.6
ARCHIVELOG COMPLETED 02/11/11 15:28 02/11/11 15:28 .03
ARCHIVELOG COMPLETED 02/11/11 16:30 02/11/11 16:30 .05
ARCHIVELOG COMPLETED 02/11/11 17:03 02/11/11 17:06 3.27
DB INCR COMPLETED 02/12/11 09:54 02/12/11 10:18 24.33
DB INCR FAILED 02/14/11 11:05 02/14/11 11:42 37.05
ARCHIVELOG FAILED 02/14/11 11:51 02/14/11 12:11 20.47
DB INCR COMPLETED 02/15/11 10:51 02/15/11 11:26 34.67
DB INCR COMPLETED 02/16/11 11:59 02/16/11 12:32 33.03
by rman backup my backup is successful by above command some backups are failed
what is the reason faild backup status
Similar Messages
-
Fix Business Role / Technical Role assignment in Pending or Failed status
Hi,
We are facing issues with few users where Business role assignment or technical role assignment is going into Pending or failed status.
None of the jobs are failing or throwing any error related with the changes.
We are running IdM 7.2 version with SP8.
Is there a way to fix this issue other than removing and reassigning or recreating ID.
Regards,
ManishHi Manish,
If technical role (priv) in failed status, please check Tero's reply in the below post. You can set a periodic job to read users and privs in failed status and use uRetryPrivilegeAdd() function to retry the assignment.
Failed AD privileges
I was able to find a document on how to set up the periodic job.
Retry failed assignments (Privilege)
You should try searching the forum and wiki for answers. Most of the issues are addressed by our community experts already. Thanks.
Kind regards,
Jai
Message was edited by: Jai Suryan -
Local disks are in FAIL status after installing the cluster
The /var/adm/messages log isn't giving me much info to go on. This has happened twice now. After installing the cluster, my local disks are in a FAIL status and the cluster is not giving me much information why.
It's a two-node cluster w/ x2100 M2s.
Any ideas?
-Hedowhen I run cldevice status -v, it reports that the two local disks are in FAIL status on each node.
That's all that's going on right now. Everything else seems to be perfect, other then those disks in FAIL status.
== from /var/adm/messages ==
Jan 15 10:17:38 frito Cluster.scdpmd: [ID 977412 daemon.notice] The state of the path to device: /dev/did/rdsk/d12s0 has changed to FAILED
Jan 15 10:17:38 frito Cluster.scdpmd: [ID 977412 daemon.notice] The state of the path to device: /dev/did/rdsk/d11s0 has changed to FAILED
-hedo. -
Status and Tracking customizing + BI Integrated Planning
Hi,
I am trying to set up a Status and Tracking (STS) solution for our Integrated planning application. I understand this might be somewhat cumbersome, as STS is created for BPS - but still SAP has said it should work for BI-IP aswell.
I see I have to make use of Planning Areas. Even though we are using BI-IP, I quickly created a plan.area i BPS0 based on one of our real-time cubes. My problem appears in the 3rd "step" of the STS customizing where I am to "Determine a hierarchy for Subplan".
I get the error: "Error when reading the hierarchy" after filling out the fields... Any ideas?? Does it have to be a BPS-type hierarchy. There is nothing wrong with our hierarchy (as we use it for planning and reporting etc), so I cannot understand the error.
Any ideas?
Thanks,
Jon Anders
PS. Feel free to share any other issues or thoughts about using STS with BI-IP.Hi,
we're using a multi-characteristic hierarchy for STS for our cost center planning. Our STS hierarchy has then one root text node, a misc business unit node below (that's your single characteristic node), a range of profit centers under that and finally the cost centers.
Actual Planning is only done on the cost centers, but since we derive the profit center from the cost center, a profit center leader can lock planning for all subordinate cost centers by locking his profit center if the cc/pc association written to the cube matches the STS hierarchy.
In the case of your profit center hierarchy, you'd probably have the root text node, then some bogus profit center you don't do any planning on, and underneath all remaining profit centers. Instead of the first profit center you could probably also use the controlling area as a characteristic (how many do you have?)
Bear in mind that any characteristic you have in the hierarchy needs to appear in the planning area and hence in the infocube.
Does this help? Regards,
Tilman -
Query to Find what SQL Server services running, what status and with what service account
I need to check what SQL Server services are running(engine,agent,IS,AS,RS,browser and Full text) and what is the present status and what service accounts are been used by them on several servers in a single shot.
Could any one help me in finding a good script for the same.I have been looking for the same thing, the issue I am running into is finding the Actual Service Name. I know this question is old, and I personally do not understand the reply.
so Far I have the following:
DECLARE @ServiceAcount NVARCHAR(128);
SET @Service = 'No Return Value'
--MsDtsServer100 (SSIS)
EXEC master.dbo.xp_regread
'HKEY_LOCAL_MACHINE',
'SYSTEM\CurrentControlSet\services\MsDtsServer100',
'ObjectName',
@ServiceAccount OUTPUT;
SELECT @ServiceAccount;
I am still looking for the correct service naming for Analysis Services, Distributed Replaay Client, Distributed Replay Controller -
For some reason all my playlists and most of my songs are no longer on my i-tunes. What happened and how do I get it back?
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. Note that in iTunes 11 an "empty" library may show your past purchases with links to stream or download them.
In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
Alternatively, depending on exactly when and why the library went missing, there may be a more recent .tmp file in the main iTunes folder that can be renamed as iTunes Library.itl to restore the library to a recent state.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device.
I've noticed more of these missing library posts of late and a common factor since I started asking is AVG Anti-Virus. It seems it might be at least part of the reason why the library file disappears. Try excluding the iTunes folder from any real-time scanning process.
tt2 -
Hi Guys,
For some reason both my AIM and Ichat are not signing on. It passes my screen name and password, but then it just doesn't sign on. What is going on?Hi Stine,
I had not replied earlier as I could not get the reply button to work. I presumed this was beause the topic has no title.
Are your passwords over 16 characters ?
Have you registered a name at both places ?
This FAQ may be of soem help.
http://discussions.apple.com/thread.jspa?threadID=121885
Ralph -
Extending resource status and reason code category
Hi Experts,
I have a couple of questions regarding the extensibility of status and reason codes in ME15.0 in the context of machine integration:
1. Is it save to add new status fields (records) in WIP.STATUS for STATUS_GROUP="RESOURCE"? Is there any impact, if a resource doesn't match one of the predefined status values?
2. The "logResourceStatusChanged" service creates entries in WIP.RESOURCE_TIME_LOG but not in WIP.RESRCE. That way, it is possible to get different status values in both tables at a given time. Do you see any negative impact resulting from this data inconsistency?
The service "ChangeResourceStatusRequest" is not suitable in our case, since it doesn't provide a timestamp as input parameter for the status change. And even if it would, the prevention of a "sfc complete" when the status is "unscheduled down" is inconvenient for our customer. The scenario is, that the customer wants to complete the quantity produced until the machine broke down (assume lot production).
3. Is it possible to add new "categories" in addition to the predefined values in WIP.REASON _CODE? What is the impact?
regards,
GeorgHi Georg,
I cannot give you a precise yes/no answer - so this is just to share some info.
- I've heard about some customer who implemented custom statuses. When a new status simply was added in the database, it did not affect a core functionality. But I do not know what happens if this status is assigned to a resource and then a core fucntionality is triggered. There might be some validation which could fail. But it is easier to test specific cases as how you are going to use SAP ME, and I doubt any developer will be happy to run a full analysis of code to answer your question.
- The new statuses need to be considered for loading via IDAT and adding into LocaleSpecificText properties file.
- As to custom categories of reason codes, I guess there are only few places where system behavior is tightly connected to specific predefined reason codes. So, I'm inclined to believe that adding reason codes and categories will not harm.
Regards,
Sergiy -
SCVMM R2 - "Incomplete VM configuration" and other bugs like "failed" status
Noticed a lot of machines in SCVMM go into an irreversible "INCOMPLETE VM CONFIGURATION" status. All options to manage the machine are then grayed out. A couple options like "repair" and "refresh" are available,
neither of which solves the problem. These machines are up and running with no related errors in our Hyper-V cluster. There is also one in a "failed" status with the same symptoms.
When is this bug in SCVMM going be fixed? This is supposed to be enterprise VM management software? Right now, I can't even manage 10 virtual machines with SCVMM because of a BUG. I have to
go to the failover cluster manager or the Hyper-V manager.
I really don't want to wipe out the entire cluster from SCVMM and readd it, because removing the cluster from management uninstalls the SCVMM agent on all servers. Needless to say, adding the cluster back to SCVMM management would (ridiculously) require
a reboot of all servers in the cluster to "reclaim storage." Just confirmed that this will happen in my test environment.
If there is a supported way to fix this, please let me know.
I am by far not the only person that has noticed this problem (try google), but there are no good supported solutions out there.Hi john,
Possible causes for an Incomplete VM Configuration status include:
A configuration file needed for this virtual machine is missing, was accidentally deleted, or is inaccessible because of insufficient permissions. Such files include the virtual hard disk files (.vhd)
and any additional virtual hard disk files in a differencing disk hierarchy (associated with checkpoints), ISO images (.iso), virtual network configuration files (.vnc), and virtual floppy disks (.vfd). A missing configuration file can be the result of unmasking
a LUN on a storage area network (SAN) to a different server.
A virtual hard disk (.vhd) was deleted without removing the virtual hard disk from the virtual machine in Virtual Machine Properties.
A library share was deleted, and an ISO image on the share was linked to a virtual machine deployed on a host.
The .vmc file was manually updated or has become corrupted, and Virtual Machine Manager cannot parse the file.
If a newly discovered virtual machine has Incomplete VM Configuration status, the cause is always a missing virtual hard disk. If other files are missing from the virtual machine—an ISO image (.iso),
a virtual floppy disk (.vfd), or a virtual network configuration file (.vnc)—a job warning is logged without placing the virtual machine in an Incomplete VM Configuration state. To find out more about the issue that caused the Incomplete VM Config statue,
view job details in Jobs view of the VMM Administrator Console for additional information. For information about using Jobs view, see "How to Monitor Jobs" (http://go.microsoft.com/fwlink/?LinkId=98633)
in VMM Help.
As to solution please refer to following article regarding this state :
https://technet.microsoft.com/en-us/library/bb963764.aspx
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .
1. The config file for the virtual machine is not missing, the machines work flawlessly in Hyper-V manager and failover cluster manager.
2. None of the other solutions apply.
3. Why is "repair virtual machine" in the solution for this? Absolutely does not work.
Forgot to add, I now have a virtual machine that is showing that it has been migrating for days (in SCVMM only of course).
What I believe happened is that SCVMM has a hard time recovering from the famous cluster errors for Hyper-V , 1146, 1230, 5120, and 5142.
In my opinion, the fix is this:
Have Microsoft fix the buggy SCVMM code. -
Data flow task error failed validation and return validation status "VS_NEEDSNEWMETADATA"
I have ETL with ~800 tables that I moving from Oracle to SQL Server (Prod Oracle -> Prod SQL)
Now the Oracle/SQL new version was came from vendor that I need to test, and for that I created new DEV environments for Oracle and SQL , the update includes updated new columns in exists tables and new tables . (DEV Oracle -> DEV SQL)
So what I tried to do is to take the old ETL(PROD) to change the connection to DEV servers.
Then I executing the packages from local laptop it's working, and if I trying to execute the packages from job schedule it's giving me errors : "Data flow task error failed validation and return validation status "VS_NEEDSNEWMETADATA"
I went to each table to check the columns if something different, and I was dropping some of the tables and recreated them in the destination but the error still shows. I also tried to change the package to "DelayValidation" to True but without
success.I do not understand the difference between "... if I going to change the Connection Manager to new connection" and "didn't change the Connection Manager, only changed inside the Server name / user/ pass" 800 tables.
What I see is some tables your packages sees in Dev (laptop) is not of the same schema once the package is deployed hence the metadata error.
Arthur
MyBlog
Twitter -
OLE DB Destination" failed validation and returned validation status "VS_ISBROKEN.
Hi
I have a package which has 10 sequence containers. Have 10 Flat File Source files and all is working perfect on BI Debug mode. When I deploy this package to server I am getting the following error.
I have changed the property Retain the same connection = True but same problem. I have changed the data flow task to Load Project instead of Load Into Project but in error message it is still showing the old name. I have tried to remove the whole step i.e.
Removed Load into Project Data flow with sequence container but I am getting the same error message.
I am not able to understand the reason. Any Idea why am I getting the same error message even I do not have the Data Flow named Load Into Package. It is in SSIS 2008 and being deployed on SQL 2012 server.
Message
Executed as user: NT Service\SQLSERVERAGENT. Microsoft (R) SQL Server Execute Package Utility Version 11.0.2100.60 for 64-bit Copyright (C) Microsoft Corporation. All rights reserved. Started: 15:28:32 Error: 2014-07-22
15:28:36.86 Code: 0xC020201B Source: Load Into Project OLE DB Destination [62] Description: The number of input columns for OLE DB Destination.Inputs[OLE DB Destination Input] cannot be zero. End Error Error:
2014-07-22 15:28:36.86 Code: 0xC004706B Source: Load Into Project SSIS.Pipeline Description: "OLE DB Destination" failed validation and returned validation status "VS_ISBROKEN". End Error
Error: 2014-07-22 15:28:36.86 Code: 0xC004700C Source:
Load Into Project SSIS.Pipeline Description: One or more component failed validation. End Error Error: 2014-07-22 15:28:36.87 Code: 0xC0024107 Source: Load Into Project Description:
There were errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 15:28:32 Finished: 15:28:36 Elapsed: 4.39 seconds. The package execution failed. The
step failed.
Many Thanks.
MH
this the error log
starttime
endtime
event
source
message
57:26.0
57:26.0
OnError
Load Into Project
The number of input columns for OLE DB Destination.Inputs[OLE DB Destination Input] cannot be zero.
57:26.0
57:26.0
OnError
Load Into Project
OLE DB Destination failed validation and returned validation status "VS_ISBROKEN".
57:26.0
57:26.0
OnError
Load Into Project
One or more component failed validation.
57:26.0
57:26.0
OnError
Load Into Project
There were errors during task validation.
57:19.0
57:19.0
OnPostExecute
Load Into TrialBalance
57:19.0
57:19.0
OnPostExecute
Trial Balance
57:19.0
57:19.0
OnPostExecute
SSIS_LoadCheck_CoreManGroup
57:19.0
57:19.0
PackageEnd
SSIS_LoadCheck_CoreManGroup
End of package execution.
57:18.0
57:18.0
OnPostExecute
Load Into JournalLine
57:18.0
57:18.0
OnPostExecute
JournalLine
57:18.0
57:18.0
OnPreExecute
Trial Balance
57:18.0
57:18.0
OnPreExecute
Truncate TrialBalance
57:18.0
57:18.0
OnPostExecute
Truncate TrialBalance
57:18.0
57:18.0
OnPreExecute
Load Into TrialBalance
57:07.0
57:07.0
OnPostExecute
Load Into Journal Type
57:07.0
57:07.0
OnPostExecute
JournalType
57:07.0
57:07.0
OnPreExecute
JournalLine
57:07.0
57:07.0
OnPreExecute
Truncate Table JournalLine
57:07.0
57:07.0
OnPostExecute
Truncate Table JournalLine
57:07.0
57:07.0
OnPreExecute
Load Into JournalLine
57:05.0
57:05.0
OnPostExecute
Load Into UserName
57:05.0
57:05.0
OnPostExecute
UserName
57:05.0
57:05.0
OnPreExecute
Business Area
57:05.0
57:05.0
OnPreExecute
Truncate Table Business Area
57:05.0
57:05.0
OnPostExecute
Truncate Table Business Area
57:05.0
57:05.0
OnPreExecute
Load Into Business Area
57:05.0
57:05.0
OnPostExecute
Load Into Business Area
57:05.0
57:05.0
OnPostExecute
Business Area
57:05.0
57:05.0
OnPreExecute
Cost Centre
57:05.0
57:05.0
OnPreExecute
Truncate CostCenter
57:05.0
57:05.0
OnPostExecute
Truncate CostCenter
57:05.0
57:05.0
OnPreExecute
Load Into Cost Centre
57:05.0
57:05.0
OnPostExecute
Load Into Cost Centre
57:05.0
57:05.0
OnPostExecute
Cost Centre
57:05.0
57:05.0
OnPreExecute
Project Status
57:05.0
57:05.0
OnPreExecute
Truncate Table Project Status
57:05.0
57:05.0
OnPostExecute
Truncate Table Project Status
57:05.0
57:05.0
OnPreExecute
Load Into Project Status
57:05.0
57:05.0
OnPostExecute
Load Into Project Status
57:05.0
57:05.0
OnPostExecute
Project Status
57:05.0
57:05.0
OnPreExecute
Project
57:05.0
57:05.0
OnPreExecute
Truncate Table Project
57:05.0
57:05.0
OnPostExecute
Truncate Table Project
57:05.0
57:05.0
OnPreExecute
Load Project
57:05.0
57:05.0
OnPostExecute
Load Project
57:05.0
57:05.0
OnPostExecute
Project
57:05.0
57:05.0
OnPreExecute
JournalType
57:05.0
57:05.0
OnPreExecute
Truncate Table Journal Type
57:05.0
57:05.0
OnPostExecute
Truncate Table Journal Type
57:05.0
57:05.0
OnPreExecute
Load Into Journal Type
57:03.0
57:03.0
OnPostExecute
Load Into Entity
57:03.0
57:03.0
OnPostExecute
Entity
57:03.0
57:03.0
OnPreExecute
Account
57:03.0
57:03.0
OnPreExecute
Truncate Table Accounts
57:03.0
57:03.0
OnPostExecute
Truncate Table Accounts
57:03.0
57:03.0
OnPreExecute
Load Into Account
57:03.0
57:03.0
OnPostExecute
Load Into Account
57:03.0
57:03.0
OnPostExecute
Account
57:03.0
57:03.0
OnPreExecute
UserName
57:03.0
57:03.0
OnPreExecute
Truncate Table User Name
57:03.0
57:03.0
OnPostExecute
Truncate Table User Name
57:03.0
57:03.0
OnPreExecute
Load Into UserName
57:02.0
57:02.0
PackageStart
SSIS_LoadCheck_CoreManGroup
Beginning of package execution.
57:02.0
57:02.0
OnPreExecute
SSIS_LoadCheck_CoreManGroup
57:02.0
57:02.0
OnPreExecute
CoA
57:02.0
57:02.0
OnPreExecute
Truncate Table CoA
57:02.0
57:02.0
OnPostExecute
Truncate Table CoA
57:02.0
57:02.0
OnPreExecute
Load Into CoA
57:02.0
57:02.0
OnPostExecute
Load Into CoA
57:02.0
57:02.0
OnPostExecute
CoA
57:02.0
57:02.0
OnPreExecute
Entity
57:02.0
57:02.0
OnPreExecute
Truncate Table Entity
57:02.0
57:02.0
OnPostExecute
Truncate Table Entity
57:02.0
57:02.0
OnPreExecute
Load Into EntityMessage
Executed as user: NT Service\SQLSERVERAGENT. Microsoft (R) SQL Server Execute Package Utility Version 11.0.2100.60 for 64-bit Copyright (C) Microsoft Corporation. All rights reserved. Started: 15:28:32 Error: 2014-07-22
15:28:36.86 Code: 0xC020201B Source: Load Into Project OLE DB Destination [62] Description: The number of input columns for OLE DB Destination.Inputs[OLE DB Destination Input] cannot be zero.
22 15:28:36.86 Code: 0xC004700C Source: Load Into Project 22 15:28:36.87 Code: 0xC0024107 Source: Load Into Project Description: There were errors during task validation. End
Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 15:28:32 Finished: 15:28:36 Elapsed: 4.39 seconds. The package execution failed. The step failed.
Hi MustafaH,
According to the error message(hightlight above), it seems it's a mapping issue that Naarasimha point out in the post above. Please check this carefully.
An OLE DB destination includes mappings between input columns and columns in the destination data source. You do not have to map input columns to all destination columns, but depending on the properties of the destination columns, errors can occur if
no input columns are mapped to the destination columns.
Reference form: http://msdn.microsoft.com/en-us/library/ms141237.aspx
In your post, you said that it is in SSIS 2008 and being deployed on SQL 2012 server. Do you mean that you create the package deployment utility by using SSIS 2008, and then implement SSIS deployment in SSIS 2012 environment? If so, you need to
convert the project to package deployment model to generate Manifest file in SSIS 2012. Please see:
Use the SQL Server 2008 version of Business Intelligence Development Studio to develop and maintain packages that are based on SQL Server 2008 Integration Services (SSIS)
Use SQL Server Data Tools - Business Intelligence for Visual Studio 2012 to develop and maintain packages that are based on SQL Server 2012 Integration Services (SSIS).
For more information, please see:
Interoperability and Coexistence (Integration Services):
http://msdn.microsoft.com/en-us/library/bb522577.aspx?ppud=4
If you have any feedback on our support, please click
here.
Elvis Long
TechNet Community Support -
Hello,
I want pass value in STATUS and Reason for rejection according to requirement when i am creating multiple lead using BAPI_LEAD_CREATEMULTI. Please help me how can i pass value. Please give some sample code that in which table i have to pass values and please also tell me INPUT_FIELDS values. Please help me
Regards,
Kshitij RathoreHello,
Please help me for solve this problem. I am trying to solve problem from last 4 days but i didn't get any solution.
Regards,
Kshitij Rathore -
Tables for Opportunity "Status" and "Reason"
Hi,
Can someone help me in finding the tables for determining "Status" and "Reason" for an opportunity along with the relvant text descriptions?
Regards,
SandeepHi Sandeep,
Status- code in field stat of CRM_JEST table
OBJNR = guid opportunity
INACT = SPACE
Text of status in TJ30T with your status profile
Reason- code in field code of CRMD_SRV_SUBJECT with
guid_ref equal to guid_set( of crmd_link with objtype_set = 29 )
Text of reason in QPCT
I hope this way help you.
Regards.
Manuel -
Hi All,
Can u pls suggest me how to copy the Activity Parner ,Reason and status from one transaction to other when we are Creating the followup transaction Manually.
Is it Possible or not ,if possible can u pls provide me the valuable suggestions.
If we would like copy the status and Reason And Activity Partner when we are Creating the follow transaction Automatically through actions we will implement Badi's but how can i configure the Transactions if i am creating follow up Transaction Manually.
its very urgent...
i look forward to your reply.
Thanks,
zaydhi
there are two ways u can achiebe this
as u said using manually to create follow up transaction u need to do the copy control and then u will be able to do the follow up
else use action to create the follow up transaction using method call and parameters
but to tell you u can copy every thing but not the reasons
for copying them u need to implement the bAdi
CRM_COPY_BADI
why we use badi when we are doing it manually ,i hope this question of urs is answered
best regards
ashish -
MY IPHONE 3GS START TO GET REALLY HOT, AND AFTER THAT ALMOST EXPLODE...ITS BROKEN NOW.... THE BATTERY GETS FAT... WHATS THE SOLUTION NOW???
Unfortunately it looks like your 3GS' battery has expanded so much that it cracked the whole case wide open. If you have AppleCare on your device then you're all set, just take it to your local Apple Store.
If not, then still take it to the store. Complain about the battery bursting, and make sure to tell them that it's for sure a defect (you'd think it's obvious, but sometimes you just need to drive the point in), and that it potentially could have been and still be a hazard.
Remind them that the phone has not been in any adverse conditions, extreme temperatures, or abused in any way but that you just merely used it normally. (I'm assuming that's the truth?)
If they're good about it they should replace the broken phone for you; but unfortunately there's little chance of repairing your current device.
Maybe you are looking for
-
Non-Best Buy Purchases no longer getting points on MyBestBuy Mastercard
This to let who it may concern know, that I will probably be cancelling my BestBuy Mastercard soon. I have not recieved points for my account since 9/10/2013 on all of my Non-Best buy purchases. I have called the "Elite Customer Service Line" about 4
-
Possible to load from mp3cd DIRECT to ipod, w/out importing
I have a few backup DVD's i made of my music, and i want to load some music onto an iPod I'm borrowing for the weekend. can I load the songs direct from the DVD's without importing them first? my biggest concern is that my library is on an external f
-
Interface Objects missing in ESR
Hello, I have created a whole bunch of interface objects under my namespace in the ESR. During message mapping, when I try to do a u201CFind design objectu201D in the message mapping definition under my namespace, I canu2019t find any of the objects
-
Standard Workflows DBM 7.0
hi, Is there standard Workflows available for PR, PO approvals for parts and vehicles and Sales Order, Sales Invoice, Service Order, Service Invoice approvals for parts and vehicles in DBM 7.0?.. Thanks in advance,
-
Intel SpeedStep & TurboBoost stops working when using Hyper-V
Hi guys, Several times my CPU speed got "stuck", not using SpeedStep or TurboBoost (i5, Ivy Bridge). Finally, I found out it happens when I use Hyper-V. Sometimes, not always. But after the next restart, the CPU won't change the speed anymore. Thus w