What Is The Network Bandwidth Usage Report?

I'm looking at the "Network Bandwidth Usage" report and it's just a list of devices with no bandwidth numbers? Is it ordered by amount of usage and if so, why isn't the usage displayed in the report and how do I see the usage for a device?
This topic first appeared in the Spiceworks Community

Page 22 of this document will give you some numbers that will allow you to estimate the total data used for a meeting. Keep in mind these numbers are what Adobe saw as average consumption, yours may be higher or lower.
http://www.adobe.com/content/dam/Adobe/en/products/adobeconnect/pdfs/web-conferencing/Adob e-Connect-9-Technical-Guide.pdf

Similar Messages

Measure the Network bandwidth usage

Hi,
For application server, is there any Oracle tool to be used to measure the Network bandwidth usage?

Hi，
The following policies are supported in Window 7
Computer Configuration | Administrative Templates | Network | Background Intelligent Transfer Services (BITS) |Set up a maintence schedule to limit the maximum network bandwidth used for BITS Background transfers
or Set up a work schedule to limit the maximum network bandwidth used for BITS Background transfers
see this link
http://blogs.msdn.com/b/wmi/archive/2011/02/02/bits-more-flexible-bandwidth-limit-policies.aspx
And download speed is also related with your network connection, your ISP, setting in your router, your system perfrormance...
Yolanda Zhu
TechNet Community Support

What is the actual bandwidth usage?

When I use Adobe Connect I am online and broadcasting for about 4 hours a day, for 10 days at a time. I only do screen sharing and voice -- no video.
I have DSL Internet. The DSL upload speeds are very poor (under 1Mb). To speed things up, I thought I'd look into getting a 4G hotspot, but I'm worried about actual bandwidth usage, since such plans have a practical limit of 5 or 10Gb per month.
My off-hand guess is that If I were to watch a video of myself, I guess it would be a couple of gigs for a four hour, non-HD video. So by that very rough guestimate, I'd hit 20Gb pretty easily over the 40 hours of my meeting. Is that right the way to think about it?
Has anyone monitored actual consumed bandwidth for a simple meeting of one person talking and sharing his screen? I'm not looking for definitive answers -- just some ballpark estimate of what such a meeting consumes each hour...
Thanks! :-)

Page 22 of this document will give you some numbers that will allow you to estimate the total data used for a meeting. Keep in mind these numbers are what Adobe saw as average consumption, yours may be higher or lower.
http://www.adobe.com/content/dam/Adobe/en/products/adobeconnect/pdfs/web-conferencing/Adob e-Connect-9-Technical-Guide.pdf

WTR1900 Internet Bandwidth Usage Report

Hello,
I have many client devices connected to my WRT1900... When I click on the Internet Bandwidth Usage Report, the results have every device listed as 0.00 MB of internet traffic. Well, every device on my network access the Internet constantly.
What am I missing to have this report actual provide some information?
//Brew

Hi @brudertl,
I also got confused with this before. I just tried to powercycle the modem, router and all the devices on the network. This might help.

Optimize network bandwidth usage in large multi-size corporate environments

SymptomsTo maintain a high protection level, you may notice an increase in bandwidth due to the increased number of updates released per day. Policy Manager Proxy (PMP) installations are especially affected as the additional strain on the likely slower network connection that exists between the remote site hosting the PMP installation(s) and the main corporate site with Policy Manager Server (PMS). The network bandwidth usage can be especially high when computers are turn on on Monday as the update packages accumulate over the weekend.
DiagnosisBy default, the Automatic Update Server (AUS) in PMS calculates byte-level differences for the last five update packages (per update channel). In the event where computers were turned off over the weekend, client machine has missed five updates, and PMS will then download a full update package (Aquarius Windows updates can be approximately 140MB in size). When this happens, network bandwidth usage can be excessively high.
SolutionWe recommend applying the suggested changes on all PMS and PMP systems and all of the F-Secure clients behind PMP installations. This may reduce the update size from 140MB to 10MB. The suggested solution consists of three different changes, outlined below:
1. Increase the number of byte-level difference files stored by the PMS
For Windows
To increase the number of byte-level differentials maintained by Automatic Update Server:
Open [F-Secure Installation Path]\FSAUS.PM\conf\server.cfg in Notepad.
Find the key num_old_versions_to_compare, change the value to 50, and save the file.
Restart Automatic Update Agent (AUA) and Automatic Update Server (AUS). In command prompt: net stop fsaua, net start fsaua, net stop fsms, net start fsms.
For Linux
To increase the number of byte-level differentials maintained by Automatic Update Server:
Open /etc/opt/f-secure/fsaus/conf/server.cfg.
Find the key num_old_versions_to_compare, change the value to 50, and save the file.
Restart Automatic Update Agent (AUA) and Automatic Update Server (AUS) daemons (root privileges required): #/etc/init.d/fspms restart
The overall disk space requirement for PMS increases. We estimate the disk consumption to increase by 10GB. Make sure the hard disk hosting the Policy Manager Server installation (Program files\F-Secure\Management Server 5\) has enough disk space.
2. Increase the cache size available on the PMP for storing files
For Windows
Note: Use the Advanced mode in Policy Manager Console (View >> Advanced mode) to edit the setting.
Go to F-Secure Policy Manager Proxy > Settings > Communication > Cache size.
The default setting is 500. Increase this to 5000 (5GB) and distribute new policies.
Verify the setting on all Policy Manager Proxy systems and adjust the settings, if needed. The setting specifies how much disk space is set aside for storing databases on the Policy Manager Proxy.
For Linux
As Policy Manager Proxy on Linux is not centrally managed, the change involves modifying a configuration file that exists on the Policy Manager Proxy system locally.
Open /etc/opt/f-secure/fspmp/conf/proxy.cfg.
Find the key max_cache_size, and change the value to 5000: max_cache_size=5000.
Restart the fspmp daemon (root privileges required): #/etc/init.d/fspmp restart
3. Adjust the F-Secure Anti-Virus client configuration using Policy Manager Console (PMC) to help prevent clients from immediately falling back to downloading updates directly from the PMS.
In case the client is unable to connect to the Policy Manager Proxy, for example due to high network traffic and multiple downloads taking place, the following setting dictates how soon the client attempts to connect directly to the Policy Manager Server to download updates.
In Policy Manager Console, go to F-secure Automatic Update Agent > Settings > Communications > Policy Manager Proxies > PMP Proxy fallback time.
Default value is zero which means fallback to PMS takes place immediately, in case where Policy Manager Proxy installation cannot be reached. To prevent this from happening, configure this setting to a higher value (suggest 7 hours).
These steps should ensure database updates are only downloaded via the PMP.

SymptomsTo maintain a high protection level, you may notice an increase in bandwidth due to the increased number of updates released per day. Policy Manager Proxy (PMP) installations are especially affected as the additional strain on the likely slower network connection that exists between the remote site hosting the PMP installation(s) and the main corporate site with Policy Manager Server (PMS). The network bandwidth usage can be especially high when computers are turn on on Monday as the update packages accumulate over the weekend.
DiagnosisBy default, the Automatic Update Server (AUS) in PMS calculates byte-level differences for the last five update packages (per update channel). In the event where computers were turned off over the weekend, client machine has missed five updates, and PMS will then download a full update package (Aquarius Windows updates can be approximately 140MB in size). When this happens, network bandwidth usage can be excessively high.
SolutionWe recommend applying the suggested changes on all PMS and PMP systems and all of the F-Secure clients behind PMP installations. This may reduce the update size from 140MB to 10MB. The suggested solution consists of three different changes, outlined below:
1. Increase the number of byte-level difference files stored by the PMS
For Windows
To increase the number of byte-level differentials maintained by Automatic Update Server:
Open [F-Secure Installation Path]\FSAUS.PM\conf\server.cfg in Notepad.
Find the key num_old_versions_to_compare, change the value to 50, and save the file.
Restart Automatic Update Agent (AUA) and Automatic Update Server (AUS). In command prompt: net stop fsaua, net start fsaua, net stop fsms, net start fsms.
For Linux
To increase the number of byte-level differentials maintained by Automatic Update Server:
Open /etc/opt/f-secure/fsaus/conf/server.cfg.
Find the key num_old_versions_to_compare, change the value to 50, and save the file.
Restart Automatic Update Agent (AUA) and Automatic Update Server (AUS) daemons (root privileges required): #/etc/init.d/fspms restart
The overall disk space requirement for PMS increases. We estimate the disk consumption to increase by 10GB. Make sure the hard disk hosting the Policy Manager Server installation (Program files\F-Secure\Management Server 5\) has enough disk space.
2. Increase the cache size available on the PMP for storing files
For Windows
Note: Use the Advanced mode in Policy Manager Console (View >> Advanced mode) to edit the setting.
Go to F-Secure Policy Manager Proxy > Settings > Communication > Cache size.
The default setting is 500. Increase this to 5000 (5GB) and distribute new policies.
Verify the setting on all Policy Manager Proxy systems and adjust the settings, if needed. The setting specifies how much disk space is set aside for storing databases on the Policy Manager Proxy.
For Linux
As Policy Manager Proxy on Linux is not centrally managed, the change involves modifying a configuration file that exists on the Policy Manager Proxy system locally.
Open /etc/opt/f-secure/fspmp/conf/proxy.cfg.
Find the key max_cache_size, and change the value to 5000: max_cache_size=5000.
Restart the fspmp daemon (root privileges required): #/etc/init.d/fspmp restart
3. Adjust the F-Secure Anti-Virus client configuration using Policy Manager Console (PMC) to help prevent clients from immediately falling back to downloading updates directly from the PMS.
In case the client is unable to connect to the Policy Manager Proxy, for example due to high network traffic and multiple downloads taking place, the following setting dictates how soon the client attempts to connect directly to the Policy Manager Server to download updates.
In Policy Manager Console, go to F-secure Automatic Update Agent > Settings > Communications > Policy Manager Proxies > PMP Proxy fallback time.
Default value is zero which means fallback to PMS takes place immediately, in case where Policy Manager Proxy installation cannot be reached. To prevent this from happening, configure this setting to a higher value (suggest 7 hours).
These steps should ensure database updates are only downloaded via the PMP.

I just want to know that if I buy an iphone 4S here in melbourne can i use it in china? i don`t know whether it`s locked or not and i don`t know what`s the network in china as well. Can somebody please help?I am really in a hurry to know it. Thanks a lot.

I just want to know that if I buy an iphone 4S here in melbourne can i use it in china?
i don`t know whether it`s locked or not and i don`t know what`s the network in china as well.
Can somebody please help？
I am really in a hurry to know it.
Thanks a lot.
P.S: For the iphone 4S. is there any difference for the one from online shop or the actual store?

iPhones purchased from the online Apple Store in Australia will be unlocked. To the best of my knowledge, unlocked iPhone are not available from the physical Apple Stores at this time, though you can call the Apple Store in Melbourne and inquire.
Note that the warranty on iPhones is not international, so if you purchase an iPhone in Australia and it needs service, you would have to ship the iPhone to someone in Australia to take or send to Apple for service and then ship it back to you.
Regards.
(Note for any readers: this is an old thread and I posted before noticing the date, but decided to leave my reply in case anyone else finds the thread and has the same question).

What is the difference in Interactive reports and Drill down reports?

What is the difference in Interactive reports and Drill down reports? Are they same?

Hi FRD ,
Both are same .
as far as i know there is no difference .
bye .

What are the best practice in report design ?

Hi,
According to you, what are the best practices in report desing about layout, fonts and colors ?
Thks

Hi,
It all depends that what type of report you are designing and what tool you are using - WebI or Crystal.
And in WebI, if it is cross tab or Tabular report etc.
One most important thing is that what is client requirement. May be client does not like which is best practice.
On the base of my personal experience I will create few demo reports using different options - layout, colors and fonts and show them to client so that they may decide.
Regards,
Bashir Awan

What are the events in interactive reports?

what are the events in interactive reports?
could plz explain

hi,
First event -
Initialization : triggered when the report is loaded in memory.
At selection-screen output : triggered when the selection screen is loaded in memory before being displayed.
At selection-screen : before leaving the selection screen.
start-of-selection : the first event for displaying the report.
This event keyword defines an event block whose event is triggered by the ABAP runtime environment
when calling the executable program selection screen processing of a selection screen.
In an executable program, all statements that are not declarations,
and are listed before the first explicit processing block, are assigned to this event block.
If the program does not contain an explicitly defined event block START-OF-SELECTION,
these statements form the complete event block START-OF-SELECTION.
If a program contains an explicitly defined event block START-OF-SELECTION,
these statements are added to the beginning of the event block.
If the program contains no explicitly defined event blocks,
these statements form the entire event block START-OF-SELECTION.
end-of-selection : after the start-of-selection is completed.
classiscal report events.
top-of-page : every time a new page is started in the list.
end-of-page : every time the list data reaches the footer region of the page.
interactive report events.
top of page during line selection : top of page event for secondary list.
at line-selection : evey time user dbl-clicks(F2) on the list data.
at pF<key> : function key from F5 to F12 to perform interactive action on the list.
at user-command
<b>http://help.sap.com/saphelp_47x200/helpdata/en/56/1eb6c705ad11d2952f0000e8353423/content.htm</b>
Rgds
Anver

What is the difference between interactive report and alv interactive repor

what is the difference between interactive report and alv interactive report
could u plz explain clearly.

Hi Rajesh,
interactive report or alv interactive report , both are same but except the viewer, Abap List Viewer (ALV).
Here in i am placing a sample simple ALV Interactive report.
Just double click on the customer number to go to the next screen.
*& Report ZKAL_ALV_INTERACTIVE_1                                      *
REPORT ZKAL_ALV_INTERACTIVE_1                  .
TYPE-POOLS: SLIS.
TYPES: BEGIN OF TY_KNA1,
          KUNNR TYPE KUNNR,
          NAME1 TYPE NAME1,
          ORT01 TYPE ORT01,
        END OF TY_KNA1.
TYPES: BEGIN OF TY_VBAK,
          VBELN TYPE VBELN,
          ERNAM TYPE ERNAM,
          ERDAT TYPE ERDAT,
          NETWR TYPE NETWR,
          WAERK TYPE WAERK,
         END OF TY_VBAK.
&--WORK AREA & TABLE DECLARATION--
DATA: W_KNA1 TYPE TY_KNA1.
DATA: T_KNA1 TYPE STANDARD TABLE OF TY_KNA1 INITIAL SIZE 1.
DATA: W_VBAK TYPE TY_VBAK.
DATA: T_VBAK TYPE STANDARD TABLE OF TY_VBAK INITIAL SIZE 1.
&--FIELDCAT TABLE & WORK AREA--
DATA: W_FCAT TYPE SLIS_FIELDCAT_ALV.
DATA: T_FCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA: W_FCAT1 TYPE SLIS_FIELDCAT_ALV.
DATA: T_FCAT1 TYPE SLIS_T_FIELDCAT_ALV.
&--EVENT TABLE AND WORK AREA--
DATA: W_EVENTS TYPE SLIS_ALV_EVENT.
DATA: T_EVENTS TYPE SLIS_T_EVENT.
DATA: W_EVENTS1 TYPE SLIS_ALV_EVENT.
DATA: T_EVENTS1 TYPE SLIS_T_EVENT.
&--COMMENT TABLE & WORK AREA--
DATA: W_COMMENT TYPE SLIS_LISTHEADER.
DATA: T_COMMENT TYPE SLIS_T_LISTHEADER.
DATA: W_COMMENT1 TYPE SLIS_LISTHEADER.
DATA: T_COMMENT1 TYPE SLIS_T_LISTHEADER.
&----APPENDING FCAT -
W_FCAT-COL_POS = 1.
W_FCAT-FIELDNAME = 'KUNNR'.
W_FCAT-SELTEXT_M = 'CUST. NO'.
W_FCAT-HOTSPOT = 'X'.            "HOT SPOT HAND SYMBOL
W_FCAT-EMPHASIZE = 'C119'.       "FOR COLORING THE COLUMN 1
APPEND W_FCAT TO T_FCAT.
CLEAR W_FCAT.
W_FCAT-COL_POS = 2.
W_FCAT-FIELDNAME = 'NAME1'.
W_FCAT-SELTEXT_M = 'CUST. NAME'.
APPEND W_FCAT TO T_FCAT.
W_FCAT-COL_POS = 3.
W_FCAT-FIELDNAME = 'ORT01'.
W_FCAT-SELTEXT_M = 'CITY'.
APPEND W_FCAT TO T_FCAT.
W_FCAT1-COL_POS = 1.
W_FCAT1-FIELDNAME = 'VBELN'.
W_FCAT1-SELTEXT_M = 'ORDER NO'.
W_FCAT1-EMPHASIZE = 'C519'.
APPEND W_FCAT1 TO T_FCAT1.
CLEAR W_FCAT.
W_FCAT1-COL_POS = 2.
W_FCAT1-FIELDNAME = 'ERNAM'.
W_FCAT1-SELTEXT_M = 'NAME OF PARTY'.
APPEND W_FCAT1 TO T_FCAT1.
W_FCAT1-COL_POS = 3.
W_FCAT1-FIELDNAME = 'ERDAT'.
W_FCAT1-SELTEXT_M = 'DATE'.
APPEND W_FCAT1 TO T_FCAT1.
W_FCAT1-COL_POS = 4.
W_FCAT1-FIELDNAME = 'NETWR'.
W_FCAT1-SELTEXT_M = 'ORDER VALUE'.
APPEND W_FCAT1 TO T_FCAT1.
W_FCAT1-COL_POS = 5.
W_FCAT1-FIELDNAME = 'WAERK'.
W_FCAT1-SELTEXT_M = 'CURRENCY'.
APPEND W_FCAT1 TO T_FCAT1.
&--APPEND COMMENTRY--
W_COMMENT-TYP = 'H'.
W_COMMENT-INFO = 'CUSTOMER DETAILS'.
APPEND W_COMMENT TO T_COMMENT.
CLEAR W_COMMENT.
&--APPEND EVENTS TABLE--
W_EVENTS-NAME = 'TOP_OF_PAGE'.
W_EVENTS-FORM = 'TOPPAGE'.
APPEND W_EVENTS TO T_EVENTS.
W_EVENTS-NAME = 'USER_COMMAND'.
W_EVENTS-FORM = 'SUB2'.
APPEND W_EVENTS TO T_EVENTS.
W_EVENTS1-NAME = 'TOP_OF_PAGE'.
W_EVENTS1-FORM = 'TOPPAGE1'.
APPEND W_EVENTS1 TO T_EVENTS1.
CLEAR W_EVENTS1.
W_EVENTS1-NAME = 'USER_COMMAND'.
W_EVENTS1-FORM = 'SUB3'.
APPEND W_EVENTS1 TO T_EVENTS1.
SELECT-OPTIONS: CUSTNO FOR W_KNA1-KUNNR.
SELECT KUNNR
         NAME1
         ORT01 FROM KNA1 INTO TABLE T_KNA1
         WHERE KUNNR IN CUSTNO.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
   I_CALLBACK_PROGRAM                = 'ZKAL_ALV_INTERACTIVE_12'
   I_BACKGROUND_ID                   = 'BIKE'
   I_GRID_TITLE                      = 'CUSTOMER DETAILS'
   IT_FIELDCAT                       = T_FCAT
   IT_EVENTS                         = T_EVENTS
TABLES
    T_OUTTAB                          = T_KNA1 .
FORM TOPPAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      IT_LIST_COMMENTARY       = T_COMMENT
     I_LOGO                   = 'LOGO_ALV'.
ENDFORM. "END OF TOPPAGE SUB.
FORM SUB2 USING UCOMM LIKE SY-UCOMM FIELDS1 TYPE SLIS_SELFIELD.
READ TABLE T_KNA1 INTO W_KNA1 INDEX FIELDS1-TABINDEX.
SELECT VBELN
         ERNAM
         ERDAT
         NETWR
         WAERK
               FROM VBAK
               INTO TABLE T_VBAK
               WHERE KUNNR = W_KNA1-KUNNR.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
   I_CALLBACK_PROGRAM                = 'ZKAL_ALV_INTERACTIVE_12'
   I_BACKGROUND_ID                   = 'KALEEM'
   I_GRID_TITLE                      = 'LIST OF ORDERS'
   IT_FIELDCAT                       = T_FCAT1
   IT_EVENTS                         = T_EVENTS1
TABLES
    T_OUTTAB                          = T_VBAK.
ENDFORM.    "END OF SUB2.
FORM TOPPAGE1.
&--APPEND COMMENTRYOF SECONDRY SCREEN--
W_COMMENT1-TYP = 'H'.
W_COMMENT1-INFO = 'LIST OF ORDERS'.
APPEND W_COMMENT1 TO T_COMMENT1.
W_COMMENT1-TYP = 'S'.
W_COMMENT1-KEY = 'CUSTOMER'.
W_COMMENT1-INFO = W_KNA1-KUNNR.
APPEND W_COMMENT1 TO T_COMMENT1.
CLEAR W_COMMENT.
W_COMMENT1-TYP = 'A'.
W_COMMENT1-INFO = W_KNA1-NAME1.
APPEND W_COMMENT1 TO T_COMMENT1.
CLEAR W_COMMENT1.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      IT_LIST_COMMENTARY       = T_COMMENT1
     I_LOGO                   = 'LOGO_ALV'
REFRESH T_COMMENT1.
ENDFORM.    "END OF TOPPAGE1
FORM SUB3 USING UCOMM LIKE SY-UCOMM FIELDS1 TYPE SLIS_SELFIELD.
    READ TABLE T_VBAK INTO W_VBAK INDEX FIELDS1-TABINDEX.
SET PARAMETER ID 'AUN' FIELD W_VBAK-VBELN.
CALL TRANSACTION 'VA02' AND SKIP FIRST SCREEN.
ENDFORM.
U can also find some of the useful codes on WIKI-SDN.
Reward helpful Answers.
Regds,
Kaleem.

Can I use iPhone 6 plus in Hong Kong & China? What is the network over there?

Can I use iPhone 6 plus both in Hong Kong & China? What is the network there? GSM or CDMA?

Hi there,
See this link here on iPhone 6/6+ and the LTE networks worldwide that I will work with....
https://www.apple.com/iphone/LTE/

What is the use of usage in item category determination?

Hi Gurus,
What is the use of usage in item category determination? pls give examples.
Thanks,
Paul

Hi John,
Assign Item Categories
In this menu option, you can specify which item categories the system proposes during document processing for each sales document type and item category group. At the same time, you can specify additional item categories with which the system default can be overwritten. There is a maximum of three possible alternative item categories.
If, for example, you enter a material with the item category group NORM in a standard order, the SAP System determines the allowed item category via the assignment of item categories to sales document types and item category groups.
The system default and the allowed alternatives are always determined from the sales document type and one or two further criteria. The system default depends on the following criteria:
sales document type
item category group
item category of the higher-level item
item category usage
Note
The SAP System automatically copies the item category determined for a sales document item to the delivery.
Recommendation
Depending on the initial situation you can start the assignment differently:
When you define a new sales document type, you should specify the proposed and the allowed item categories for the materials that are represented by the item category group.
When you define a new item category, you should specify for which sales document types an item category is proposed or which item category is possible for the materials represented by the item category group.
When you define a new item category group, you are to enhance the assignment of item categories to sales document types by this new item category group.
Actions
To define item category determination, proceed, for example, as follows:
1. Choose the sales document type to which you want to assign item categories.
2. Then choose one of the item category groups.
3. Specify all the allowed item categories for the combination of sales document type and item category group.
If you are dealing with a non-material item, you must specify the corresponding item usage.
If it is a subitem, specify the item category of the higher-level item.
If it is an item category that is to be proposed in the sales document, you must indicate the combination of item category, item category group and sales document type as a default value.
4. If necessary, specify between one and a maximum of three item categories, with which the system default can be manually overwritten during document processing.
Thanks & Regards
Sasikanth.Ch

What are the common errors in reporting and extraction.

hi friends,
what are the common errors in reporting and extraction for implementation and support projects.
thanking u
suneel.

Hi Suneel,
Errors in reporting are like incorrect query creation, errors in creating RKF, CKF and variables, misunderstanding the data, or errors with other tools like broadcasting. Errors in extraction relate to source system connectivity, field-infoobject mapping, incorrect code etc. Also, please search the forums and you will find many real time examples.
Hope this helps...

What is the network unlock code for my HTC Thunderbolt?

I want to unlock my husband and I's HTC Thunderbolts. Our contract is up and we bought our phones out right before we signed a contract. What is the network unlock code for the HTC Thunderbolt phones?

Thanks. Apparently Verizon isn't really "sorry to see the customer go". I'll simply buy an unlocked phone and be done with Verizon for good. Two years is to long to be treated like this by them. I bought my phone and should be able to use it with whatever carrier I want. It is no longer Verizon's phone. Yes I understand they own some of the stuff they put on my phone but by all means they can remove it. I didn't want their crap on their in the first place. I wish the rest of America would quick kissing their rear. End Rant
>>Edited to remove profanity<<
Message was edited by: Verizon Moderator

What is the Network Consistency Index?

In CAND, what is the network consistency index? How is it derived?

The Network Consistency index measures how devices performing similar functions are similarly deployed. The measurement is derived from three factors – hardware, software, and technology configurations within the network. For example, if you have 200 branch routers, a high degree of consistency means that they all have a similar hardware platform, same software versions, and similar configurations. The Network Consistency Index score is between 1 and 1000. The higher the number, the more consistency in the network.
June

What Is The Network Bandwidth Usage Report?

Similar Messages

Maybe you are looking for