What is "Use Settings for All iViews"?

Dear all,
Could anyone tell me what is "Use Settings for All iViews" in the presentation setting of folder under the document sharing iView in the collaboration room?
Thanks and best regards,
Marcus

The layout set you choose here normally just applies to the exact iView you are currently in, so it is tight to the current folder as well as the iView you are using to see its content right now. Using another iView to display the content of this folder might use a different presentation. But if you want to make sure that this folder is presented in a certain way in every iView (e.g. if you want to show a picture folder always with a thumbnail explorer), then you choose "Use Settings for All iViews". But be careful: this is really sticky -- you won't get rid of it easily if the chosen layout has no "Details" link to the parent (e.g. an HTML renderer). In this case you can only reset this setting with the administrative "Folder Settings" helper under "Content Administration/KM content/Tools"...
Regards, /-/ansi

Similar Messages

What is Proper settings for iPhone? 640x320?

Also, what program can anyone recomend for converting Video DL'ed on my Hard Drive and for DVD to iPhone? I was trying to use imtoo but it crashes everytime. I have an XP system and a new iMac. I hear alot of people talking about Wondershare. I want my video to look the best it can and I heard that the iPhone has a differnt size ratios than the ipod. Thanks for the Help.

The layout set you choose here normally just applies to the exact iView you are currently in, so it is tight to the current folder as well as the iView you are using to see its content right now. Using another iView to display the content of this folder might use a different presentation. But if you want to make sure that this folder is presented in a certain way in every iView (e.g. if you want to show a picture folder always with a thumbnail explorer), then you choose "Use Settings for All iViews". But be careful: this is really sticky -- you won't get rid of it easily if the chosen layout has no "Details" link to the parent (e.g. an HTML renderer). In this case you can only reset this setting with the administrative "Folder Settings" helper under "Content Administration/KM content/Tools"...
Regards, /-/ansi

What is the use of FOR ALL ?

What is the use of FOR ALL ?. Need clear explanation with examples

http://www.oracle.com/pls/db112/portal.portal_db?selected=5&frame=#sql_and_pl_sql_languages
http://download.oracle.com/docs/cd/E11882_01/appdev.112/e10472/tuning.htm#i48876
http://download.oracle.com/docs/cd/E11882_01/appdev.112/e10472/tuning.htm#i54218
Straight SQL operations are faster, but if you can't write those for some reason bulk operations are not quite as slow as PL/SQL loops.

What is the use of for all entries in select statement

what is the use of for all entries in select statement

hi,
FOR ALL ENTRIES is an effective way of doing away with using JOIN on two tables.
You can check the below code -
SELECT BUKRS BELNR GJAHR AUGDT
FROM BSEG
INTO TABLE I_BSEG
WHERE BUKRS = ....
SELECT BUKRS BELNR BLART BLDAT
FROM BKPF
INTO TABLE I_BKPF
FOR ALL ENTRIES IN I_BSEG
WHERE BUKRS = I_BSEG-BUKRS
AND BELNR = I_BSEG-BELNR
AND BLDAT IN SO_BLDAT.
*******************************8
look another example
what is the use of FOR ALL ENTRIES
1. INNER JOIN
DBTAB1 <----
> DBTAB2
It is used to JOIN two DATABASE tables
having some COMMON fields.
2. Whereas
For All Entries,
DBTAB1 <----
> ITAB1
is not at all related to two DATABASE tables.
It is related to INTERNAL table.
3. If we want to fetch data
from some DBTABLE1
but we want to fetch
for only some records
which are contained in some internal table,
then we use for alll entries.
1. simple example of for all entries.
2. NOTE THAT
In for all entries,
it is NOT necessary to use TWO DBTABLES.
(as against JOIN)
3. use this program (just copy paste)
it will fetch data
from T001
FOR ONLY TWO COMPANIES (as mentioned in itab)
4
REPORT abc.
DATA : BEGIN OF itab OCCURS 0,
bukrs LIKE t001-bukrs,
END OF itab.
DATA : t001 LIKE TABLE OF t001 WITH HEADER LINE.
itab-bukrs = '1000'.
APPEND itab.
itab-bukrs = '1100'.
APPEND itab.
SELECT * FROM t001
INTO TABLE t001
FOR ALL ENTRIES IN itab
WHERE bukrs = itab-bukrs.
LOOP AT t001.
WRITE :/ t001-bukrs.
ENDLOOP.
Hope this helps!
Regards,
Anver
<i>if hlped pls mark points</i>

I have 3 computers...Window PC, PowerBook G3 (old) and MacBook Pro. I use firefox for all of them and have for quite some time. Is there a way for them all to use the same toolbar? Each of them have differnet bookmark/ settings etc.,

I have 3 computers...Window PC, PowerBook G3 (old) and MacBook Pro. I use firefox for all of them and have for quite some time. Is there a way for them all to use the same toolbar? Each of them have differnet bookmark/ settings etc.,

Open Media Encoder and add your Sequences:
File > Add Premiere Pro Sequence
Navigate to your Premiere Project and select it in the list.
You can then select multiple Sequences from the Project (Ctrl+Click)
and load them all at once into Media Encoder and apply
the same encoding preset to all Sequences at the same time.

Win7 and Reader X - default settings for ALL users/profiles

I have a custom browser/app that opens PDF's within the app which can sometimes cause issues. I found that if I set Reader X to not open in the browser (Edit>Preferences>Internet - uncheck "Display PDF in Browser") that this does resolve most issues. My problem...when changed this only affects the current user/profile that's logged in. Potentially there can be dozens of users on these laptops. The other setting is when opening a PDF, I get the warning about Protected Mode not being able to be used due to the current configuration. I can select "Always open with Protected Mode disabled" and I no longer get the message; but again, current user/profile only.
Is there a way to set these settings for ALL users/profiles? Running Win7 (32bit) with Reader X.

I do not know why you experience this; what exactly happens when a non-admin users attempts to highlight something?
You are talking about highlighting in the same document?

Security settings for all users

I recently developed a document that requires digital signatures and have been testing it. The only downside is that when a user opens the document, Adobe prompts for the installation of new security settings, and it installs it for that user only. I need to add a registry key to the new security settings, but it is only available to be added to the current user hive. Does anyone know how to install the new settings for all users?
Here is the registry key I need to add.
[HKEY_CURRENT_USER\Software\Adobe\Adobe Acrobat\9.0\Security\cPubSec]
"bSelfSignCertGen"=dword:00000000
Im using Adobe Reader 9.3 and Win XP.
Any help would be terrific!
Thanks.

Hi,
There are really two separate issues. First, is Adobe pushing updates to the Acrobat Address Book (i.e. adding certificates as trust anchors) and the second issue is how you can push your own update to disable the creation of self-signed digital IDs. Although the two issues share an underlying mechanism, they are separate and you cannot leverage one for the other.
First issue first. Adobe has entered into partnership with certain Certificate Authorities and has created a mechanism to add their certificates to the Acrobat Address Book (aka Manage Trusted Identities) using http to send a copy of the Security Settings file that contains only digital IDs. There are two ways to trigger the download process. One is to go into the Preferences, select Trust Manager, and click the Update Now button in the Automatic Updates group box. The other method is to load the DigSig plug-in (beginning with Acrobat 9, plug-ins no longer load a launch in order to speed up the launch process). As I'm sure you have deduced, opening a file with a signature field cause the DigSig plug-in to load which in turn triggers the automatic download. The reason we have limited the automatic download to DigSig being loaded is because the vast majority of people viewing PDFs are not using the digital signature functionality (much to my personal chagrin because the more people use digital signatures, the better my job security ) and we didn't want to bother them with an update they would never need. People already complain that there are too many updates, and we are trying to limit the irritability factor. To close the loop on this function, once the download process has been triggered the Acrobat check two more things before it does the update, 1) has it been a month since I checked and, 2) if it has been a month is there a new file to download. This way we are not pestering people with unneeded updates, or if they do need the update, at least not too often. And finally, Address Book management has to be on a per user basis. A certificate that you may elect to trust could be a certificate that the next person want to specifically keep untrusted. The Windows Certificate Store, Mac Keychain and Firefox Certificate Manager all work on a per user basis.
That brings us to what you would like to do. The good news is you can use the Export Security Settings featrue to create a distributable file that will set the preference. The real question is how will you distribute the file, but before we get to that, here is how to create the file.
With Acrobat closed, set the registry setting you noted in the message above
Launch Acrobat
Select the Advanced > Security > Export Security Settings menu item
Click the Deselect All button on the Export Security Settings dialog
Select the Signing Preferences Settings checkbox
Click the OK button on the Export Security Settings dialog
Select Signature Creation Settings and note "Allow creation of self-signed Digital IDs" is set to No
Click the Export button on the toolbar
Follow the on screen dialogs. You don't have to encrypt the file, but you must sign it with a certifying signature
At this point you have the file available for distribution. You could e-mail it to your intended recipients with import instructions, or you could post if for download, or you could set the Preference the to automatically push the file from a server. To check this feature out select the Edit > Preferences menu item and then select Security from the Categories list box. You would need to select the Load security settings from a server checkbox and then set up the URL. As an aside, you can also export these settings by selecting the Automatic Update Settings checkbox on the Export Security Settings dialog noted in the bullet points above. You have a chicken and egg problem in that you have to get the users to first manually import the file in order to set up the automatic import. That I can't help you with, you're just going to have to decide what works best for you.
Good luck,
Steve

Need a program that will save the capacity settings for all storage bins

Hey all,
I would really apprecaite any help with a program I am trying to come up with.
What I need to do is create a program that:
1. Will save the capacity settings for all storage bins to
a file
2. Then update them all to allow unlimited capacity BUT be able to revert back to the
original that was saved.
Any suggestions about possible existig reports that I may be able to modify to suit my needs, or where to start from if I have to do this from scratch?

I know I'm talking about expensive apps, but having been in prepress for about 30 years now, I really don't look at anything other than Quark XPress or InDesign for page layout apps. Your printing vendor will also be much happier with you when you use these products. Some areas of the U.S. tend to be mostly Quark oriented; others, InDesign. Ask your vendor what they would prefer, and if there are any free or cheap alternative apps they'll accept documents from.
Apple's Pages app (part of iWork) is a decent page layout program, but hasn't been updated in four years. It also doesn't support CMYK. If you place a CMYK image in the app, it will export out an RGB version of it. Not good! You can work with RGB images if you prefer, but your CMYK translations will be left to the skill of the print shop you use to do the conversions.
Don't even think about using Word. It has what it calls a page layout option, and does pretty much work like one, but there's no good way to import it into a real layout app such as InDesign. You end up paying the printer for their time to rebuild your entire project in either XPress or InDesign so they can actually do something with it.

When I sync ical on iphone with mac, every entry is multiplied. What are the settings for syncing without repeats?

When I sync ical on iphone with mac, every entry is multiplied. What are the settings for syncing without repeats?

If your wireless environment is less than ideal, as it is in most inhabited areas, the influence of other wireless networks and devices competing for the same very small portion of the electromagnetic spectrum will affect your network's performance. Your own wireless network is a microcosm of that environment.
To mitigate the effects of competing wireless networks, use 5 GHz to the maximum practicable extent. It is comparatively free from interference contributed by other wireless devices and is likely to remain that way for some time. However, it is less tolerant of intervening obstructions and construction materials than the 2.4 GHz spectrum, so it's not a panacea. Every installation is different so you must experiment to determine the optimum configuration.
Place your wireless router (what kind is it?) in a central location, convenient to all the devices that require it. Most of the time a utility or ISP will locate it in some remote corner next to the utility service entrance. That is almost always the worst possible location.
Others find that only a direct wired Ethernet connection between router and devices will maintain uninterrupted access to Airplay.
That is almost certain to result in the best possible AirPlay performance. Short of having everything hard wired (it's not an option for the iPad for example) use an Ethernet connection for all the devices that lend themselves to that method. Your AppleTV is certainly one of them, since its location is not likely to change very often. Your AirPort Express should be another, since your audio systems are likely to stay put as well. Connect them both to your existing router, either directly or through an inexpensive Ethernet switch. Your problems are likely to be solved with just those two connections.

I have a business and I use iCal for all my appointments, how can I print receipts from my MacBook to a receipt printer? I want my clients to have a receipt of the services that they have paid for, can anyone HELP ME PLEASE?

I have a business and I use iCal for all my appointments, how can I print receipts from my MacBook to a receipt printer?
I want my clients to have a receipt of the services that they have paid for, can anyone HELP ME PLEASE?

Well...I went to the modem (Westell, WireSpeed), found the NAT settings, once again, I'm WAY over my head, I am assuming this is a TCP connection (as opposed to a UDP) and per Lorex my mobile devices will use port 1025. So I gave it a "global port range" of 1-10 and I indicated that the "base host port" was 80, 1025, & 9000 (ports 1,2,3). When I selected the 'enable' it asked for a "host devise" my choices are my IPhone, IMac and the IP address for the dvr, so I choose the dvr. I still cannot connect and canyouseeme still can NOT find these open ports. This is taking up my whole day! I don't know how people figure this stuff out.

How to change settings for all users?

Hi All,
In cPro we have User Settings button. On clicking that we get a Tabstrip where you will find "User" tab.
my question is: How can we change the default settings for all users e.g setting the checkbox "Scheduling only manually" to true ?
Best Regards,
Arti.

Hi Arti,
In cProjects the authorizations can be managed either by authorization profile administration by system administrator for General authorizations or by Project specific authorizations for individual cProjects elements by Project owner.
Try the first one and I hope you will get the solution.
Regards,
Nishit Jani
Award points only if you find the information useful.

What are the settings for datasource and infopackage for flat file loading

hI
Im trying to load the data from flat file to DSO . can anyone tel me what are the settings for datasource and infopackage for flat file loading .
pls let me know
regards
kumar

Loading of transaction data in BI 7.0:step by step guide on how to load data from a flatfile into the BI 7 system
Uploading of Transaction data
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( Transaction data )
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to create ODS( Data store object ) or Cube.
Specify name fro the ODS or cube and click create
From the template window select the required characteristics and key figures and drag and drop it into the DATA FIELD and KEY FIELDS
Click Activate.
Right click on ODS or Cube and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.
4. Monitor
Right Click data targets and select manage and in contents tab select contents to view the loaded data. There are two tables in ODS new table and active table to load data from new table to active table you have to activate after selecting the loaded data . Alternatively monitor icon can be used.
Loading of master data in BI 7.0:
For Uploading of master data in BI 7.0
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( master data attributes, text, hierarchies)
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to select Insert Characteristics as info provider
Select required info object ( Ex : Employee ID)
Under that info object select attributes
Right click on attributes and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.

What are the settings for Transport?

What are the settings for Transport?

u will get three panel in transport connection in BW side
here u need to collect object and drop them to 2nd panel
then u need to select whether u want o select all objects or only necessary objects
select as per ur requirement hten u need to write thse object in a NEw request
now executte nad go to Se10 and relaease sub task and main task
now ask basis team to impot it in QAS test it and again trnasport these to Production environemnt.
assign points if helps

What are the settings for web?

What are the settings for web?

800mbps Quicktime for the web,< </div>
The compression is reducing the number of pixels being shown in order to maintain the bitrate. So rapid motion, which requires nearly all of the pixels to be redrawn, causes things to stutter.
Compression is really, really hard to do. Really.
bogiesan

How to configure default parental settings for all users (10.7)?

Hello,
I've made a silent installation of iTunes using MSI files and it works well.
I need to enable parental controls and configure it. Users must be preventing of changing these settings.
At the end of the iTunes installation I automatically created registry keys :
[HKEY_LOCAL_MACHINE\SOFTWARE\Apple Computer, Inc.\iTunes\Parental Controls]
"AdminFlags"=dword:001b7ac5
"AdminMoviesLimit"=dword:000000c8
"AdminTVShowsLimit"=dword:000001f4
"AdminRatingSystemID"=dword:0000000b
"AdminGamesLimit"=dword:0000012c
According to http://support.apple.com/kb/HT2102 it is the procedure to set default parental settings for all users and to lock these settings.
When iTunes is first launched, parental settings are not set nor locked.
I use iTunes 64 bits on Windows 7 64 bits.
Where is the mistake?
Thanks in advance.

You can set up a system cache for sharing jars: See here: http://java.sun.com/j2se/1.5.0/docs/guide/javaws/developersguide/enterprise_config.03.06.html

What is "Use Settings for All iViews"?

Similar Messages

Maybe you are looking for