When I log in on my iMac, I get a no entry sign, help?

When I turn on my mac, i can log in. However after a while the usual apple logo turns into a no entry sign. It stays like this and I can't access my actual account, I have tried restarting, pulling out the plug and putting it in again, I've tried to reboot while holding 'x', I've reselected my hardrive with the alt button. None of this seems to work, please help!!!!

Similar Messages

21in. imac running Mountain Lion will not start just get grey no entry sign

21in. imac running Mountain Lion will not start just get grey no entry sign

David,
Please carefuly read what Apple says in how to troubleshoot this issue. Also PLEASE complete your profile,we don't even know what iMac you have or the version of OS X it is running.
Gray screen appears during startup

Microsoft Word launches automatically when I log in to my iMac

I have reviewed the previous discussions relating to the above issue, yet the solutions provided don't seem to help me out.
Every time that I log on to my mac, Microsoft Word launches. I have checked the options that permit program launches within the account preferences> login items> users. Word isn't listed here and therefore there is no action that I can take to stop this from happening.
Does anyone else have this problem and if so do they have a solution to stop Word from launching at startup?
Many thanks

Are you leaving Word open when you shut down? If so, Resume is starting it up.
Other than that, right-click on the icon in the dock, go to Options, and make sure Open at Login is not checked.

When i log in on the printer, i get a message that my login is invalid. I can go to the efax websie

Envy 110 e-all in one printer D411. when i enter my efax number and pin on the printer I get a message that my login is invalid. However, I can go to the efax website and using the same number and pin, I can login to the website. How do I fix this?
This question was solved.
View Solution.

Try logging in without the "1" in front of the 10 digit number, if you are already not using the 1, put it in front of the fax number. If that does not work, try turning ePrint off, then back on from under the web services menu. That menu is located under the set up Icon on the front panel that looks like a wrench. Then after that touch the webservices icon ( the one that looks like a piece of paper with a target behind it) and then reprint the info/report page from webservices and then try to login again.
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

Did anyone get a call from 800-000-0000 saying it was verizon and that when u log onto your acct u can get 200$ off your next bill because verizon cares?

i got a call on may 29 at 11:15 am saying that if i log onto my verizon acct i can get $200 off my next bill because verizon cares was the message it said goto my vz.com and log onto your acct and that will happend

It's a scam. There are numerous threads about it here.

I use Firefox and when I log onto Barclays Online Banking I get a balance but every time I click on 'statement' Mozilla freezes and then closes down?? Help

How can I resolve this issue so that I can clearly see my statement. I asked the question on Yahoo Answers and the concensus was switch to Google Chrome? Surely that's not the answer?

Hello,
Please try restarting Firefox in safe mode and see if the problem goes out.
If it works fine in safe mode then one of your Extension may be causing the problem.
[[Troubleshoot Firefox issues using Safe Mode]]
Please report back to us.
Thank you

Imac won't start no entry sign

imac won't boot up, has no entry sign

You will need to reinstall Lion:
Reinstalling Lion Without the Installer
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alterhatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

Hi,i cannot log into my itunes account,keep getting error message-0x800b0101,any help,on windows vista

hi,error message appears anytime i try to use anything on the itunes menu,installed the latest updates and still no change.i can play song samples but cant purchase tracks etc....any help out there???

Same problem. I can see the itunes store so not a problem with windows firewall. The account is active on my iphone so i know i am not locked out. I can connect the PC to my iphone so i know itunes is working ok. It is just logging into itunes on this pc which doesn't work. Only thing I can think of is that the email address I use for my apple id has been offline for a while and is working again now, I'm wondering whether this has been the case for others who are having this issue?

Old ipod nano - when i connect it to my imac - error message

I have an old iPod Nano - when i connect it to my iMac, I get an error message that says I can't have more than 5 computers authorized with my account - My account only shows 4, but that's really beside the point since this iMac is already authorized and I sync other devices from it. Any suggestions? It won't let me add any new content to this iPod.

See Recover your iTunes library from your iPod or iOS device.
tt2

I use to be able to see the alias, when I logged in on the web, but it no longer posible

I use to be able to see the alias, when I logged in on the web, but it no longer posible.
any help?
thanks
/mike

You need to do the basic troubleshooting steps described in the User Guide, Appendix B.
Restart phone
Reset phone
Restore in iTunes using a backup
Restore in iTunes as new, without using a backup
If restoring as new doesn't help, there is a hardware failure in the phone that needs evaluation by Apple.

When i log onto safari the text zooms in, how do i zoom out

When i log on to safari, the font gets bigger like the text zooms in, how do i zoom out of text?

Does your entire screen look like it zoomed in?
If so, then hold control and scroll down. This will zoom the screen out to normal.
If not, you can either press Command and comma or go up to the safari tab and click preferences. After this, go to appearance and make sure your text sizes are a reasonable number, i like between 12-18. And if this doesn't work, the last thing i can think of would be to click advanced tab, and make sure you don't have a minimum size requirement that is set ridiculously high.
hope this helped

No Entry Sign when trying to netboot new MacMini to Mountain Lion Server

My company just purchased a new MacMini i5 2.5 GHz and I am trying to netboot it to my Mountain Lion Server 10.8.2 but I am getting the No Entry sign when it tries to boot to the server. I tested my other Mac computers that are in my environment and they are able to netboot to the server fine. It just seems to be an issue with this latest Mac Mini.
As part of my troubleshooting, I created a new netrestore image from the new Mac Mini using System Image Utility on the Mountain Lion Server. The server successfully created it and I set it as the new default image in the NetBoot server. After taking these steps, I am still getting a No Entry sign.
I checked the log on the server to see what is happening when it tries to boot and this is what is displays:
Any ideas?
11/16/12 1:36:21.318 PM netbiosd[148]: name servers down?
11/16/12 1:36:53.638 PM bootpd[6740]: BSDP INFORM [en1] 1,a8:20:66:31:ad:e0 NetBoot006 arch=i386 sysid=Macmini6,1
11/16/12 1:36:53.638 PM bootpd[6740]: NetBoot: [1,a8:20:66:31:ad:e0] BSDP ACK[LIST] sent 172.16.124.63 pktsize 380
11/16/12 1:36:54.159 PM bootpd[6740]: BSDP INFORM [en1] 1,a8:20:66:31:ad:e0 NetBoot006 arch=i386 sysid=Macmini6,1
11/16/12 1:36:54.160 PM bootpd[6740]: NetBoot: [1,a8:20:66:31:ad:e0] BSDP ACK[SELECT] sent 172.16.124.63 pktsize 388
11/16/12 1:37:46.498 PM bootpd[6740]: BSDP INFORM [en1] 1,a8:20:66:31:ad:e0 NetBoot006 arch=i386 sysid=Macmini6,1
11/16/12 1:37:46.498 PM bootpd[6740]: NetBoot: [1,a8:20:66:31:ad:e0] BSDP ACK[LIST] sent 172.16.124.63 pktsize 380
11/16/12 1:37:47.018 PM bootpd[6740]: BSDP INFORM [en1] 1,a8:20:66:31:ad:e0 NetBoot006 arch=i386 sysid=Macmini6,1
11/16/12 1:37:47.018 PM bootpd[6740]: NetBoot: [1,a8:20:66:31:ad:e0] BSDP ACK[SELECT] sent 172.16.124.63 pktsize 388
11/16/12 2:03:21.107 PM netbiosd[148]: name servers down?
11/16/12 2:04:50.429 PM bootpd[6791]: BSDP INFORM [en1] 1,a8:20:66:31:ad:e0 NetBoot006 arch=i386 sysid=Macmini6,1
11/16/12 2:04:50.429 PM bootpd[6791]: NetBoot: [1,a8:20:66:31:ad:e0] BSDP ACK[LIST] sent 172.16.124.63 pktsize 380
11/16/12 2:04:50.931 PM bootpd[6791]: BSDP INFORM [en1] 1,a8:20:66:31:ad:e0 NetBoot006 arch=i386 sysid=Macmini6,1
11/16/12 2:04:50.932 PM bootpd[6791]: NetBoot: [1,a8:20:66:31:ad:e0] BSDP ACK[SELECT] sent 172.16.124.63 pktsize 388
11/16/12 2:17:33.919 PM netbiosd[148]: name servers down?
11/16/12 2:20:58.585 PM netbiosd[148]: name servers down?
11/16/12 2:34:09.562 PM netbiosd[148]: name servers down?
11/16/12 2:39:03.753 PM netbiosd[148]: name servers down?

I'm seeing the same behavior with a new Late 2012 Macmini6,2 (2.3GHz quadcore i7).
I have a lab with several variants of minis up through the last generation. One of those minis is a NetBoot/DeployStudio server. I have it hosting a 10.8.2 NetBoot image, which works for all of the other lab minis but this new one.
I have tried 3 different methods for NetBoot:
Holding the 'N' key at boot
Holding option and seeing my NetBoot disk in the selectable options
Booting into the restore partition and selecting my NetBook disk from the Startup Disk preference pane
All 3 options result in what is described above - the Ghostbusters (minus the ghost) no entry sign. My particular mini then shuts itself down shortly thereafter.
My NetBoot server log looks similar to the above, where my BSD INFORM messages have sysid=Macmini6,2.
I have confirmed that - on the restore partition at least - the shipping OS on the new mini 6,2 is 10.8.1. It's likely a custom edition for this new hardware. It's possible that a component of a 10.8.3 update would fix it, but I'm unfortunately leaning toward this being an EFI firmware issue. I've noted on another site that these minis seem to have issues with VMware's ESXi, where the suggested course of action will be an Apple firmware update: http://communities.vmware.com/thread/423099
As the lab is hoping to purchase 40 of these systems, NetBoot support is rather critical.

No Entry sign on start up screen goes dark when I use utility disk

HELP!!!!
Everything was fine no strange noises or bad behavior but when I started up my MacBook Pro I get a "No Entrance Sign" (or what-ever it's called).
I have unplugged all the peripherals (external drives, monitor, etc) but to no avail.
When I tried booting from a Utilities disk (Disk Warrior) the screen went dark and I could not see the instructions (it was there but very dark and dim).
Is there anything I can do or am I doomed?
HELP!!!!
Thanks.

Er, it looks like a "No Entrance" sign. It's OK the cats at The Genius bar understood - they call it a "No Entrance" sign too. It basically means you're screwed and need to get a new internal drive. Luckily I managed to make a rushed back-up so things are not too severe (just expensive).

Why won't DiskWarrior boot up my mac? (no entry sign when booting from DW)

I get a "no entry" sign (black circle with a diagonal line through it" when I try to boot from the DW dvd. I'm not sure which type of macbook I have but it was bought in January 2007, and before my file system got corrupted my OS was 10.4.11 . I can boot perfectly find from a Data Rescue 3 DVD (and have already used this to backup all my files) and from the OS X install DVD, so why am I getting this error when booting from DiskWarrior? The apple sign appears and the cog spins for a minute or two and then the no entry sign comes up and stays there...
It's DiskWarrior 4.2.

is this a disc which was mailed to you or one you burned? sometimes their downloaded "upgrades" are just for install only, you have to contact them for the disc...
if this is suppose to be a genuine boot disc, it could just be a bad burn. the boot DVDs should be apple partition map.

I have a new IMAC 5k running Yosemite and when I log in I am asked a whole series of questions as to what keychain can access. How can I authorise all of these to be available upon login? Items concerned are such as "Talagent", "Messages agent" etc

I have a new IMAC 5k running Yosemite and when I log in I am asked a whole series of questions as to what keychain can access. How can I authorise all of these to be available upon login? Items concerned are such as "Talagent", "Messages agent" etc

Back up all data before proceeding.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select
          Change Settings for Keychain "login"
In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
          Keychain Access ▹ Preferences... ▹ First Aid
There are four checkboxes in the window that opens. Check all of them. if they're not already checked. Close the window.
Select
          Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access.
If you use iCloud Keychain, open the iCloud preference pane and uncheck the Keychain box. You'll be prompted to delete the local iCloud keychain. Confirm. Then re-check the box. Follow one of the procedures described in this support article to set up iCloud Keychain on an additional device.

When I log in on my iMac, I get a no entry sign, help?

Similar Messages

Maybe you are looking for