When i tried to add new contact in my ip5, the keyboard to key in the name did not appear. Pls help.

When someone called me, i tried to add his phone number into my contact, but the keyboard did not appear when i wanted to key in the names or other details.

Hi, tenangaku. 
Thank you for visiting Apple Support Communities. 
I would recommend closing all applications in multitasking and power cycling the device.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Cheers,
Jason H. 

Similar Messages

  • I got an itunes giftcard for my birthday and when i tried to add it on my balance on my ipod touch it says the code you entered is not  recognized as a valid code. but i just got this card brand new for my birthday.

    i got an itunes giftcard for my birthday and when i tried to add it on my balance on my ipod touch it says the code you entered is not  recognized as a valid code. but i just got this card brand new for my birthday.

    Make sure you're using the correct code. For most iTunes cards, the code is under the scratchoff area on the back of the card. For more information, see this support article:
    http://support.apple.com/kb/TS1292
    If you can't get to work after perusing that page, contact the iTunes Store Support; instructions are at the bottom of that article.
    Regards.

  • When I tried to add music to my IPod Classic I rec'd a mesage that it could not be synced because it cannot be read from or written to. How do I remedy this?

    I have an IPod Classic loaded with software version 1.1.2. I tried to add some music to it from my ITunes library and got a message that the IPod could not be sybced because it cannot be read from or written to. Please tell me how I can fix this issue. Thank you in advance for any assistance you can can give me.

    Click here and follow the instructions.
    (126846)

  • Brand New MacB Air and i haven't been able to get passed the format which has had to be done twice because, I have a French Numeric Keyboard and Language in English.  The minute I type in my password, the keyboard gives me letters that i did NOT type.

    I live in Switzerland and can only buy a Mac Air with a French or German keyboard, no chance to buy an English keyboard Mac here,.  When setting up  I chose the French numerique keyboard, although there are two choices French or French numerique.  I put in my language as English.  When all was set up I came to the start page and had to put in my password, by the grace of g....I just happened to see the first letter I typed before it turned into a dot.  My password which was supposed to start with the number 2 showed a french e with accent before it quikly became a dot.
      Because of the dot system, this meant that I had no clue what the keyboard was typing as my password ...........and true enough my password was not accepted despite my trying all combinations.  I have had to reformat twice now thanks to Apple Chat and both times my password was not accepted.  I am in the process of formatting it again, this time on my own.  If the Start page does not accept my password again this can only mean that the Mac left the factory with faults.  I could not be more disappointed with the money spent and the time and trouble that Apple Chat and I have spent in trying to correct a brand new out of the box Mac.  I have a cheap Toshiba laptop also with a french keyboard and english language which gave me no trouble at all.  I am not impressed with the so called King of computers!  First of all the dot system is daft.  People want to be able to see and confirm their passwords before they are set for good.  Second,  this problem is going to give me a lot of grief.  Switzerland business is not renowned for its after sales service or the time it takes to do repairs.  When I had an issue with my Vaio laptop which was still under warranty, they kindly picked it up from my house, repaired and promptly returned it.  How's that for good proper service.

    i didn't read a lot of your 2nd paragraph, but it seems like the password is the issue, right?
    do a true clean install
    reboot your machine and hold down command+option+r, you should see a spinning globe - if you don't see the globe or anything that reads internet recovery, shut down and try again
    at menu, chose disk utility and once there, find your HD on the left side, select the physical name and erase it as mac journaled
    exit disk utlity
    at menu, choose install OSX
    this time, when it asks for a password just hit continue, it will let you complete without a password
    you should be able to get into your laptop, now figure out what password you'll be able to use with your kb issue

  • Signature error when user tried to add new database via configuration.

    We just moved domain. No changes to database, operating system. As admin I can get in fine with the new domain, but not the user. He tried to create a new database in the configuration dialogue box and got debug error. When you click on next he get a signature error. Any ideas?

    I used the information to narrow down what was wrong. You were right about the user. The old user was not working, but after I created a new user that I (admin) was able to logon and see the database, the user still unable to add a new database connection. I went back to the old dbxconnections file and just made edit to the file and put it back into operation and the user was able to see their data again.

  • The App Store App disappeared when I upgraded to iOS 8.1.3.  I Restored my iPhone 5 and it still did not appear.  How do I get it back?

    The App Store App disappeared when I upgraded to iOS 8.1.3 on my iPhone 5.  Restore didn't work, any suggestions?

    Any restrictions set up in Settings/General/Restrictions? If yes, disable them. Default apps that are restricted will disappear from the screen, lifting the restrictions again will bring them back.

  • Cant add new contacts to favourites in iphone4

    Unable to add new contacts into favourites section in iphone4. When trying to add new contact the phone simply reverts back to home screen. Any one knows a solution.

    First, try resetting your phone:
    Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release(ignore the slide to power off).

  • HT204053 why do my husbands iphone and my iphone seem to be synced as when he puts in a new contact it also goes onto my phone if i deleted his it comes off his how can i stop this we both have different apple ids

    not sure how to fix this problem i seem to have synced my iphone and my husbands iphone together as when he deletes a contact from his phone it also comes off mine we both have different itunes account when i add new contact it also goes onto his please help

    Welcome to the Apple community.
    The iTunes and iCloud accounts are different accounts, check that you are not both using the same iCloud account at settings > iCloud.

  • HT1386 I just downloaded four books through iTunes. I tried 5 times to sync the books onto my iPhone. They do not appear on the iPhone. Previously purchased books had synced fine. I selected sync all books; and also tried selecting all books individually.

    I just downloaded four books through iTunes. I tried 5 times to sync the books onto my iPhone. They did NOT appear on my iPhone. Previous books synced without problems. I tired syncing ALL books, and also selected book by selecting the new books. No luck. What do/can I do now. iTunes prevents me downloading again. The books show on the computer. I cannot redownload direct to my iPhone now as iTunes indicates the books are already downloaded.What do/can I do now?

    You got the new iphone?????   I have same problem.  I transferred audiobooks to device to find no audiobooks on device (despite it being in iTunes as if it was).  Have you found a solution?????   I even tried to change import settings on format transfer but hasn't worked. 

  • TS1347 when i add new contact to my iphone , and search for it i did't find it but it store in my phone and apperars when called me or i write the no

    when i add new contact to my iphone , and search for it i did't find it but it store in my phone and apperars when called me or i write the no

    In the Contacts app, select "Groups" in the upper left hand corner.
    Then select all the groups that are desired to be displayed.
    Select Done.
    Now search for the contact(s) in question.  Do they appear now?

  • Xennet error, when tried to add new network card

    Hi,
    I got an error when I tried to create new virtual network thru VM manager,
    I have add a new virtual network card thru VM manager in the same Xen bridge "xenbr0" , then i reboot the virtual machine, but when i tried to activate this network I got the below error:
    cannot activate network device
    xennet device eth1 does not seem to be present, delaying initialization.
    ifconfig in the virtual machine:
    dev13248 Link encap:Ethernet HWaddr 00:16:3E:0B:DD:E4
    BROADCAST MULTICAST MTU:1500 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
    eth0 Link encap:Ethernet HWaddr 00:16:3E:5A:3E:6E
    inet addr:192.168.2.102 Bcast:192.168.2.255 Mask:255.255.255.0
    inet6 addr: fe80::216:3eff:fe5a:3e6e/64 Scope:Link
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:204 errors:0 dropped:0 overruns:0 frame:0
    TX packets:48 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:47253 (46.1 KiB) TX bytes:5623 (5.4 KiB)
    lo Link encap:Local Loopback
    inet addr:127.0.0.1 Mask:255.0.0.0
    inet6 addr: ::1/128 Scope:Host
    UP LOOPBACK RUNNING MTU:16436 Metric:1
    RX packets:1045 errors:0 dropped:0 overruns:0 frame:0
    TX packets:1045 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:1458998 (1.3 MiB) TX bytes:1458998 (1.3 MiB)
    sit0 Link encap:IPv6-in-IPv4
    NOARP MTU:1480 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
    ifconfig in the VM server:
    eth0 Link encap:Ethernet HWaddr 00:1C:C4:46:AF:3D
    inet addr:192.168.2.101 Bcast:192.168.2.255 Mask:255.255.255.0
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:110 errors:0 dropped:0 overruns:0 frame:0
    TX packets:98 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:13177 (12.8 KiB) TX bytes:17612 (17.1 KiB)
    eth1 Link encap:Ethernet HWaddr 00:1C:C4:46:AF:3E
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:0 (0.0 b) TX bytes:2052 (2.0 KiB)
    eth2 Link encap:Ethernet HWaddr 00:1C:C4:A6:B8:0E
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
    eth3 Link encap:Ethernet HWaddr 00:1C:C4:A6:B8:10
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
    lo Link encap:Local Loopback
    inet addr:127.0.0.1 Mask:255.0.0.0
    UP LOOPBACK RUNNING MTU:16436 Metric:1
    RX packets:127 errors:0 dropped:0 overruns:0 frame:0
    TX packets:127 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:11984 (11.7 KiB) TX bytes:11984 (11.7 KiB)
    peth0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
    UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
    RX packets:127 errors:0 dropped:0 overruns:0 frame:0
    TX packets:92 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:14405 (14.0 KiB) TX bytes:17422 (17.0 KiB)
    Interrupt:21
    peth1 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
    UP BROADCAST NOARP MTU:1500 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
    Interrupt:23
    peth2 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
    UP BROADCAST NOARP MTU:1500 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    Interrupt:16 Memory:f8000000-f8011100
    peth3 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
    UP BROADCAST NOARP MTU:1500 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
    Interrupt:23 Memory:fa000000-fa011100
    vif0.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
    UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
    RX packets:98 errors:0 dropped:0 overruns:0 frame:0
    TX packets:110 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:17612 (17.1 KiB) TX bytes:13177 (12.8 KiB)
    vif0.1 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
    UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
    RX packets:6 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:2052 (2.0 KiB) TX bytes:0 (0.0 b)
    vif0.2 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
    UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
    vif0.3 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
    UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
    xenbr0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
    UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
    RX packets:12 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:2236 (2.1 KiB) TX bytes:0 (0.0 b)
    xenbr1 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
    UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
    RX packets:6 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:1968 (1.9 KiB) TX bytes:0 (0.0 b)
    xenbr2 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
    UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
    xenbr3 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
    UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)

    Don't inject the Windows 7 version of the driver into your WinPE image. Depending on what version of ADK you are using determines what version of the driver you will inject into WinPE.  If you are using MDT 2013 with ADK 8.1 you are using WinPE 5.0/5.1
    which is basically Windows 8.1. Make a selection profile explicitly for your WinPE drivers to inject. Only include the drivers you want in the WinPE image. And match the architecture of the network and storage drivers (Windows 8.1 versions).
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • 500 Internal Server Error when trying to add new members

    My Workspace is working correctly but when I try to add new users, I get the following error:
    500 Internal Server Error
    Thanks
    Michel C.

    Hello Michel,
    How are you processing to add new members?
    You should be manager of your workspace and
    - go to http://beehiveonline.oracle.com
    - click on buttom "Create Group or Add New Members"
    - Choose your group
    - CLick on the link "Add new member"
    regards
    Fred

  • When trying to manually add new songs to ipod, itunes gets stuck on preparing to update and does not transfer songs.

    While adding new songs to ipod touch, all was fine.
    Then suddenly, everytime I tried to add new songs, Itunes got stuck on "preparing to update."
    Now I can add no songs at all.

    Somebody on twitter mentioned temporarily turning off their passcode before syncing and that seemed to help.

  • Trying to add a contact

    I did NOT mean to give a kudo -- Skype sucks when it comes to customer service!
    I'm trying to talk to a live HUMAN BEING because your posted "answers" are useless!!  I'm trying to add a contact that doesn't show up in the Skype directory, though she swears she is in it.  Then the "directions" after typing her Skype address  "In the top right corner of the window, click Add to Contacts and enter some text to introduce yourself. This is important to let your friend know that you’re adding them as your Skype contact. When you’re done, just click Send."  Well, folks it AIN'T showing anything there!  I have looked all over the site and can't find anything like that.  THAT is why I need to speak with a live, breathing, human being!
    Post transferred to create its own new thread.
    Subject/title amended accordingly.

    Hi, Gvaleskie, and welcome to the Community,
    Please post back with the details of which version of Skype you are using and on which device or computer and its operating system.  Your post reads like you have found the user guides, so we here in the Community will need more information before we can assist.
    Skype does not have a call-in customer support facility.  Here is a link to the instruction on how to contact Skype Customer Service via their secure portal: Contact Customer Service
    As you know you intend to contact Customer Service, skip past Step 2 of the instruction where several articles from the FAQ library will appear for you to review, and proceed to Step 3, Continue Support Request (the "button" appears at the lower right corner of the website page). You may also skip past in Step 4 where you will be referred back here to the Community; no need to do this as the Community is where you started.
    Regards,
    Elaine
    Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
    Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

  • Address Book Version 4.1 (687) can not add new contact Leopard OSX 10.5

    Well, I have tried to add a contact using Mail, or using Address Book.
    No-Go.
    The "New Card" under File->New Card is even grayed out. I have over 16 Gigs of space available, so it is not a space issue on the hard drive.
    I do use and sync with i-Phone, could that be an issue?

    What happened when you tried to revert to backup on the Tiger machines? The data structures used by Leopard Address Book are completely different from those used by Tiger.
    You should be able to get the notes transferred in vCards - make sure that you have the option set in Leopard Address Book's vCard preferences.
    AK

Maybe you are looking for