Which 10.4.8 update do I run?

New to Mac here (after 5 years with Linux).
Not 'trusting' huge online (downloaded) updates, I downloaded and burned to CD the Intel 10.4.8 Update as well as the COMBO update. I did a SHA1 on each (after burn) and they match the Apple numbers. I assume the non-combo is an incremental? (You know what they say about 'assume'!!)
Wife has a new Intel Macbook and I have a new Intel mini both running 10.4.7.
1. Which update do I run on my mini.... the combo or the other one?
2. Can I take the CD to wife's laptop copy the dmg file and run it to update her machine? Legal? Good practice? I would assume that's why Apple puts these downloads out there... so we only have to grab it once for multiple computers? Brand new to 'your world' so I don't know what I don't know! Again, which one do I run on her machine?
Thanks. (There should be a step-by-step, idiot-proof "How to update for newbies" FAQ on the Apple site.)
Al
Mini Mac OS X (10.4.7)

1. In theory does not matter since you have 10.4.7, but most would probably recommend you install the combo update.
2. "Can I take the CD to wife's laptop copy the dmg file and run it to update her machine? Legal?"
Yes and yes

Similar Messages

I am trying to update a number of items which the software check brings up: It runs and says it is installing but at the end I get this error message: The update could not be expanded, and may have been corrupted during downloading. The update wil

Hi,
I am trying to update a number of items which the software check brings up:
It runs and says it is installing but at the end I get this error message:
BUT then I ge tthis:
Can anyone help me to enable the software to update?
Thanks

Thanks. Something isn't right as I just tried to download the iphoto update - it said it had competed the download but then when I clicked on the download item I get this:
Think will have to take it into the store.....
thanks for replying.

I have an epson T50 shared network, which is connected to a computer that runs on Windows 7 64-bit. The 10 days Apple has updated the printer drive and since then has been trying to print the following message: / Library/Printers/EPSON/InkjetPrinter2/Filt

I have an epson T50 shared network, which is connected to a computer that runs on Windows 7 64-bit. The 10 days Apple has updated the printer drive and since then has been trying to print the following message: / Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS/ rastertoescpII failed.
What should I do?

The first thing you should do is re-write your post to make it a bit more understandable. I got you have an Epson printer connected to your PC, however after that your post doesn't make any sense. Are you attempting to print from your iMac, if so then you need to download and install Bonjour for Windows on your Windows machine. Then set Windows so it has printer sharing turned on and then on the iMac simply follow Apple's instructions for adding a printer.
http://support.apple.com/kb/DL999
http://support.apple.com/kb/HT4670

Have an i book G4 took it to the I store and they sorted mymain issue which is getting my I tunes to run on it, and its a greatl, but i cant order prints from photos from it,NEED UPDATE?

i book G4 2nd hand, love it, got it sorted at an i store to trun my itunes and my i phone 4, cant seem to print photos from it, company websites Kodak, Trueprint,Jessops seem to be woefull i just want to print the 500 plus picks from my camera role ? without sepnding 3 weeks uploading them to somehere else. i do not have a printer. help thanks Im in the uk (yes i know my i book not been looted yet phew)

Which exact iBook model is it? What is the processor's MHz/GHz rating and which type of optical drive does it have?
You can choose from this list:
http://www.everymac.com/systems/apple/ibook/index-ibook.html
Which version of the OS is it running?
How much RAM is installed?
Which browser(s) are you using?

Problem description: (MacBook Pro 15" late 2008, OSX Yosemite 10.10.2 installed, no pending updates) computer is running very slow - takes 2-3 minutes to open apps such as Pages, even when no other apps are open. Randomly freezes and becomes unrespo

Problem description:
(MacBook Pro 15” late 2008, OSX Yosemite 10.10.2 installed, no pending updates) computer is running very slow - takes 2-3 minutes to open apps such as Pages, even when no other apps are open. Randomly freezes and becomes unresponsive, requiring forced power down. Randomly logs off. Removed Kodak AIO software via Clean My Mac2, but BonjourAgent still there and requesting access. Cleaned weekly with Clean My Mac2 and running Sophos AntiVirus. 2GB memory installed. Currently 169.99 GB available of 249.2 GB capacity.
Help?
EtreCheck version: 2.1.8 (121)
Report generated March 21, 2015 at 11:35:35 AM EDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (15-inch, Late 2008) (Technical Specifications)
    MacBook Pro - model: MacBookPro5,1
    1 2.4 GHz Intel Core 2 Duo CPU: 2-core
    2 GB RAM Upgradeable
        BANK 0/DIMM0
            1 GB DDR3 1067 MHz ok
        BANK 0/DIMM1
            1 GB DDR3 1067 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
    Battery Health: Normal - Cycle count 59
Video Information: ℹ️
    NVIDIA GeForce 9400M - VRAM: 256 MB
        Color LCD 1440 x 900
    NVIDIA GeForce 9600M GT - VRAM: 256 MB
System Software: ℹ️
    OS X 10.10.2 (14C1514) - Time since boot: 0:13:37
Disk Information: ℹ️
    Hitachi HTS543225L9SA02 disk0 : (250.06 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Macintosh HD (disk0s2) / : 249.20 GB (168.91 GB free)
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
    HL-DT-ST DVDRW GS21N
USB Information: ℹ️
    Apple Inc. Built-in iSight
    Apple Inc. BRCM2046 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple, Inc. Apple Internal Keyboard / Trackpad
    Apple Computer, Inc. IR Receiver
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /Library/Extensions
    [not loaded]    com.leapfrog.driver.LfConnectDriver (1.11.1 - SDK 10.10) [Click for support]
    [loaded]    com.sophos.kext.sav (9.2.50 - SDK 10.8) [Click for support]
    [loaded]    com.sophos.nke.swi (9.2.50 - SDK 10.8) [Click for support]
        /System/Library/Extensions
    [not loaded]    com.leapfrog.codeless.kext (2) [Click for support]
Launch Agents: ℹ️
    [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [running]    com.kodak.BonjourAgent.plist [Click for support]
    [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
    [running]    com.sophos.uiserver.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.adobe.SwitchBoard.plist [Click for support]
    [loaded]    com.leapfrog.connect.authdaemon.plist [Click for support]
    [loaded]    com.macpaw.CleanMyMac2.Agent.plist [Click for support]
    [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
    [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
    [running]    com.sophos.common.servicemanager.plist [Click for support]
User Launch Agents: ℹ️
    [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [loaded]    com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Click for support]
    [loaded]    com.macpaw.CleanMyMac2Helper.scheduledScan.plist [Click for support]
    [loaded]    com.macpaw.CleanMyMac2Helper.trashWatcher.plist [Click for support]
User Login Items: ℹ️
    Dropbox    Application (/Applications/Dropbox.app)
Internet Plug-ins: ℹ️
    AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 [Click for support]
    FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    Flash Player: Version: 16.0.0.305 - SDK 10.6 Outdated! Update
    AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Click for support]
    AmazonMP3DownloaderPlugin1017265: Version: AmazonMP3DownloaderPlugin 1.0.17 [Click for support]
    JavaAppletPlugin: Version: Java 8 Update 31 Check version
    AmazonMP3DownloaderPlugin: Version: AmazonMP3DownloaderPlugin 1.0.17 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    iPhotoPhotocast: Version: 7.0 - SDK 10.8
User internet Plug-ins: ℹ️
    CitrixOnlineWebDeploymentPlugin: Version: 1.0.94 [Click for support]
    Google Earth Web Plug-in: Version: 6.0 [Click for support]
Safari Extensions: ℹ️
    AdBlock
    Disconnect
    Add To Amazon Wish List
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
    Java [Click for support]
    Tuxera NTFS [Click for support]
Time Machine: ℹ️
    Skip System Files: NO
    Mobile backups: OFF
    Auto backup: YES
    Volumes being backed up:
        Macintosh HD: Disk size: 249.20 GB Disk used: 80.29 GB
    Destinations:
        Backup [Local]
        Total size: 63.67 GB
        Total number of backups: 1
        Oldest backup: 2015-02-23 16:16:08 +0000
        Last backup: 2015-02-23 16:16:08 +0000
        Size of backup disk: Too small
            Backup size 63.67 GB < (Disk used 80.29 GB X 3)
Top Processes by CPU: ℹ️
         5%    WindowServer
         1%    loginwindow
         0%    AppleSpell
         0%    SophosUIServer
         0%    SophosAntiVirus
Top Processes by Memory: ℹ️
    118 MB    InterCheck
    101 MB    SophosScanD
    60 MB    Dropbox
    54 MB    mds_stores
    41 MB    SophosAntiVirus
Virtual Memory Information: ℹ️
    49 MB    Free RAM
    682 MB    Active RAM
    652 MB    Inactive RAM
    315 MB    Wired RAM
    1.49 GB    Page-ins
    2 MB    Page-outs
Diagnostics Information: ℹ️
    Mar 21, 2015, 11:18:52 AM    Self test - passed
    Mar 21, 2015, 10:53:03 AM    /Library/Logs/DiagnosticReports/SophosUIServer_2015-03-21-105303_[redacted].cra sh
    Mar 19, 2015, 07:59:03 PM    /Library/Logs/DiagnosticReports/CalNCService_2015-03-19-195903_[redacted].crash

Linc Davis wrote:
Slow performance after installing Yosemite on an older Mac is often caused by inadequate memory. Although you can install the upgrade on a Mac with 2 GB of memory, experience has shown that at least 4 GB is needed for full performance.
Select About This Mac from the Apple menu. If you have less than 4 GB of memory, and your model has upgradable memory, install as much as it can take, or at least that much. Any reputable RAM vendor will have a web form in which you can select the Mac model and be directed to compatible parts.
Memory in the MacBook Air is not upgradable. If that's what you have, you should restore the previous system from a backup, or replace the machine. Ask if you need guidance.
The Etrecheck report clearly shows that SylvieRose has a Macbook Pro, not a Macbook Air and that there are only 2 GB RAM installed. The Etrecheck report can be very informative if one takes the time to examine it.
Ciao.

Windows 7 64-bit update won't run after hard drive replacement HP G62-144DX

Replaced hard drive, ran recovery discs, everything OK except that windows 7 64-bit would not update. Services showed windows update to be running, but update gave error message: service not started. Reinstalled old hard drive which before all tests had showed drive to be defective and tried again, this time all ran Ok and windows update ran. This time all tests showed the orginal hard drive to be OK.

Hello jzerener,
Is there a question in here somewhere? I'm happy everything is working again, but I certainly can't explain why you encountered these results as you updated.
Thank you for sharing.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Can't update due to message saying a prior update is still running and to reboot, but I have rebooted 4 or 5 times

Can't update due to message saying a prior update is still running and to reboot, but I have rebooted at least 4 or 5 times What do I need to remove to get the install to work?
I am stuck at FireFox 3.6.18 as no update actually installs, even when I am logged in as the admin.
i am running XP SP3
I have the update files for version 4, 6, 8, and 10. IF I can figure out the error - probably in the registry - which update should I start with

If there are problems with updating then best is to download the full version and uninstall the currently installed version and delete the Firefox program folder to remove any leftover files.
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 10.0.x: http://www.mozilla.org/en-US/firefox/all.html
*Firefox 3.6.x: http://www.mozilla.org/en-US/firefox/all-older.html
Uninstall your current Firefox version, if possible.
*Do NOT remove personal data when you uninstall the current version or you lose your bookmarks and other data because all profile folders will be removed.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

COPA Segment Not Updated during AFAB Run

Hi Experts,
While running AFAB run system is not recoganising the Product Category and Sales District
which is maintained in " KEDR" .
If we enter manually the entry in the system We will have to press one screen Derivation " Where it will pick up " automatically.
Is there any solution for this,
thanks,
regards
N. Kumar

Hi Siva,
I will brief the Scenario;
We have one Asset Class for Low Value Asset.
While running AFAB T-code System is not updating the COPA Derivation which is configured under KEDR.
Where the same has been updated while AFAB run ie Normal depreciation Items.
This is our problem,
regards
N.Kumar

Updater won't run unless AdobeARM.exe is first manually stopped.

I'm still using Reader 9.4.1, which I recently reinstalled (after Reader X wouldn't open following initial installation) on Windows 2000 Professional, SP4.
Windows Task Manager always shows process AdobeARM.exe running after initial booting of computer.
In Reader, the "Check for Updates" function fails, yielding the message "Updater is already running".
Windows Task Manager shows an additional process AdobeARM.exe running for each attempt to check for updates. (AdobeARM.exe doesn't close automatically following an update or an update attempt.)
Only after closing all instances of AdobeARM.exe will the Updater run, and, unless AdobeARM.exe is once again manually closed with the Windows Task Manager, the Updater cannot be run a second time.

OK, I see.
I would like to help you and it will require a little more effort from you.
1. In the registry below set iLogLevel DWORD value to 1.
HKEY_LOCAL_MACHINE\SOFTWARE\Adobe\Adobe ARM\1.0\ARM
2. Restart the system
3. Open AdobeARM.log file and copy last section related to the last run of Updater, starting with
[Date\time] Adobe ARM 1.4.7.0 logging started.
E-mail it to me or post in the forum so I can investigate further.
Also, please provide a few more pieces of info
a. Are you logged as Administrator?
b. Is there Acrobat installed on the system? If yes, which version?
c. Did you change Updater preferences to disable automatic updates (I can actually get it from the log)?
d. Is there any other User looged into this system? If Yes, what kind of the User? Admin? Standard? Guest?

Updates won't run

Hi
For some reason Software Update won't run. I have also manually downloaded a few update packages (such as Quicktime 7.2, Combo Updater 10.4.10 v1.1 etc) and these won't run either. I already have updated to 10.4.10 via SW update a little while ago, but saw some advice about running the combo updater to fix 'prebindings' - thought this might fix the other problems, but it won't run anyway
I have corrected permissions booted off the installer dvd, but apart from that I'm not sure what to do next...
Mike

Please elaborate.
OK. Here is what I disagree with & why. I'm sorry that this requires such a long reply, but I feel strongly enough about the topic to air all my concerns, not just those that apply specifically to your recommendations.
First, I think "Turn off sleep mode for both screen and hard disk" is misleading. Display sleep isn't a problem -- it is the Mac itself going to sleep (IOW, system sleep mode) during the update that Apple says should be avoided. I don't think Apple says anything about avoiding drive sleep -- since the drive only sleeps after a relatively long period of inactivity & installing updates by their nature is disk intensive, I can't see that as an issue either.
Likewise, Apple doesn't say to avoid delta updates in favor of Combo ones. It recommends applying a Combo update only as a troubleshooting/repair procedure for certain problems, not as a routine installation method. Since combos are generally much larger downloads, & not everyone has high speed access or ISP's that allow unlimited, continuous large downloads, implying that there is something wrong with using the deltas for routine updates is likely to result in some users becoming frustrated with the update process & maybe even give up on applying them.
I have similar concerns with the recommendation not to allow "SU to install major (or even minor) updates automatically." I think it safe to say that this what the majority of users do, what Apple intends as the method of choice for non-technically adept users, & that it usually works perfectly well. IMO, this is because it is an automatic process, requiring no special knowledge of which updates to apply in what order, where they should be stored (e.g., not in /Library/Receipts), or even the fact that downloading isn't the same as installing.
I have mentioned elsewhere in this forum my objections to the logic behind avoiding automatic installs because the process is lengthy & "an interrupted install will almost certainly cause havoc." Since the install won't begin until the installer package is downloaded & its integrity is verified, the length of the process has nothing to do with it -- if it is interrupted such that the download won't pass the verification phase, the install will not begin & no havoc will ensue. If interrupted during the install phase it probably will, but the same is true for a manual install. Moreover, there is essentially no possibility that a cat or user will abort an automatic install at a critical phase, short of pulling the plug or shutting down the computer.
I believe the recommendation not to do anything else on the computer during the install is overly generalized. This recommendation (which I grant is a common one) seems to ignore that human users are not the only ones running processes during installs (or at any other time). Processes launched by root, wheel, & other non-human users continue to run, generally beyond the control of human users. Does it make sense that Apple would design the installer app to be safe to use when these fundamental processes are running but neglect to do so for higher level processes that depend on them? Such a broad recommendation might make sense for a cooperative multitasking OS like OS 9, which is what I think the logic behind this is often based on, but not for OS X.
Moreover, since an installer package may even replace OS components that the install process itself depends on, it should be fairly obvious that this doesn't occur on-the-fly but only after a restart (which is why it is required).
In general, I'm concerned not just about your recommended install ritual, but about all similarly elaborate ones that go beyond what Apple recommends. There are specific things mentioned in them that can on rare occasion lead to problems, but I think overall it does more harm than good to suggest that all users must take all these steps any time they install anything. There are two main reasons for this:
1. Elaborate lists of steps like these rarely make it clear which steps are the really important ones or when they should be applied. It is all too easy for inexperienced users to get the impression that backups aren't necessary if you follow all the other steps, that backups are important only when doing an install, that it is OK to do an install if you follow all the steps even if your Mac has other unresolved problems, or even that the steps plus the install will cure them. It is a normal part of human nature to look for ways to rationalize avoiding tedious, unglamorous tasks like maintaining good backups, especially when it involves additional time & expense. Lists like these have to be very carefully written to avoid providing grounds for this sort of rationalization. With no offense meant to anyone, this is something amateur writers (myself included) generally do not have the skills to pull off.
2. It is also a normal part of human nature to avoid things that cause fear & uncertainty. Convince users that all these steps are necessary to avoid disaster & some will just avoid applying updates altogether. (How many times in this forum is the phrase, "if it ain't broke, don't fix it" used to justify not upgrading?)
For all these reasons, I believe the list should be shortened to the fundamentals: maintain good backups, fix any problems before applying updates, & avoid applying them if you are under a deadline.

How to obtain information which jar files was updated

Hello.
How to obtain information after launched application by jnlp file or shortcut which jar files was updated.
Do JWS have some log file which I can display after running application?

Yes you can start the Java Cache Viewer:
just open a cmd/shell and type:
javaws -viewer
on top there is a drop-down to switch between the different cached things, You can also see the JARs that you have in your cache currently.
or type
javaws
to get all available options...
Sebastian

Update Row into Run Table Task is not executing in correct sequence in DAC

Update Row into Run Table Task is not executing in correct sequence in DAC.
The task phase for this task is "Post Lost" . The depth in the execution plan is 19 but this task is running some times in Depth 12, some times in 14 and some time in Depth 16. Would like to know is this sequence of execution is correct order or not? In the out of the Box this task is executed at the end of the entire load. No Errors were reported in DAC log.
Please let me know if any documents that would highlight this issue
rm

Update into Run table is a task thats required to update a table called W_ETL_RUN_S. The whole intention of this table is to keep the poor mans run history on the warehouse itself. The actual run history is stored in the DAC runtime tables, however the DAC repository could be on some other database/schema other than warehouse. Its mostly a legacy table, thats being carried around. If one were to pay close attention to this task, it has phase dependencies defined that dictate when this task should run.
Apologies in advance for a lengthy post.... But sure might help understanding how DAC behaves! And is going to be essential for you to find issues at hand.
The dependency generation in DAC follows the following rules of thumb!
- Considers the Source table target table definitions of the tasks. With this information the tasks that write to a table take precedence over the tasks that reads from a table.
- Considers the phase information. With this information, it will be able to resolve some of the conflicts. Should multiple tasks write to the same table, the phase is used to appropriately stagger them.
- Considers the truncate table option. Should there be multiple tasks that write to the same table with the same phase information, the task that truncates the table takes precedence.
- When more than one task that needs to write to the table that have similar properties, DAC would stagger them. However if one feels that either they can all go in parallel, or a common truncate is desired prior to any of the tasks execution, one could use a task group.
- Task group is also handy when you suspect the application logic dictates cyclical reads and writes. For example, Task 1 reads from A and writes to B. Task 2 reads from B and writes back to A. If these two tasks were to have different phases, DAC would be able to figure that out and order them accordingly. If not, for example those tasks need to be of the same phase for some reason, one could create a task group as well.
Now that I described the behavior of how the dependency generation works, there may be some tasks that have no relevance to other tasks either as source tables or target tables. The update into run history is a classic example. The purpose of this task is to update the run information in the W_ETL_RUN_S with status 'Completed' with an end time stamp. Because this needs to run at the end, it has phase dependency defined on it. With this information DAC will be able to stagger the position of execution either before (Block) or after (Wait) all the tasks belonging to a particular phase is completed.
Now a description about depth. While Depth gives an indication to the order of execution, its only an indication of how the tasks may be executed. Its a reflection of how the dependencies have been discovered. Let me explain with an example. The tasks that have no dependency will have a depth of 0. The tasks that depend on one or more or all of depth 0 get a depth of 1. The tasks that depend on one or more or all of depth 1 get a depth of 2. It also means implicitly a task of depth 2 will indirectly depend on a task of depth 0 through other tasks in depth 1. In essence the dependencies translate to an execution graph, and is different from the batch structures one usually thinks of when it comes to ETL execution.
Because DAC does runtime optimization in the order in which tasks are executed, it may pick a task thats of order 1 over something else with an order of 0. The factors considered for picking the next best task to run depend on
- The number of dependent tasks. For example, a task which has 10 dependents gets more priorty than the one whose dependents is 1.
- If all else equal, it considers the number of source tables. For example a task having 10 source tables gets more priority than the one that has only two source tables.
- If all else equal, it considers the average time taken by each of the tasks. The longer running ones will get more preference than the quick running ones
- and many other factors!
And of course the dependencies are honored through the execution. Unless all the predecessors of a task are in completed state a task does not get picked for execution.
Another way to think of this depth concept : If one were to execute one task at a time, probably this is the order in which the tasks will be executed.
The depth can change depending on the number of tasks identified for the execution plan.
The immediate predecessors and successor can be a very valuable information to look at and should be used to validate the design. All predecessors and successors provide information to corroborate it even further. This can be accessed through clicking on any task and choosing the detail button. You will see all these information over there. As an alternate method, you could also use the 'All/immediate Predecessors' and 'All/immediate Successor' tabs that provide a flat view of the dependencies. Note that these tabs may have to retrieve a large amount of data, and hence will open in a query mode.
SUMMARY: Irrespective of the depth, validate
- if this task has 'Phase dependencies' that span all the ETL phases and has a 'Wait' option.
- click on the particular task and verify if the task does not have any successors. And the predecessors include all the tasks from all the phases its supposed to wait for!
Once you have inspected the above two you should be good to go, no matter what the depth says!
Hope this helps!

Indicator Value Updated After 2nd Run

Hello,
I've this statistics vi that calculates various things. One of the indicators updates its value only on the second run and not on the first run, I'm confused as to why it happens. I've tried using flat sequence, but it still does the same thing.
Any ideas?
Thank you,
Solved!
Go to Solution.
Attachments:
stat_done.vi ‏196 KB
Indicator.png ‏5 KB
subarray_post.vi ‏11 KB

Hi Ravens Fan,
The .png file shows which indicator it is. When I run stats_done with a .txt file, subarray.vi suppose to count jumps(doesn't matter though) and then pass the value to "# of times exceeded," which in turn writes it to the array in the front panel and the .txt file. BUT, "# of times exceeded" shows a value only when I run stats_done twice instead of once. Here is a .txt file that you can run with stats_done.vi, if you want; I believe it'll explain better than me (look at # of jumps value in the front panel). It's a really weird issue....
Thank you,
Attachments:
H10 nzl 919 1500 psi 40 kHz 3.0V 6spf 1.0µs_LTS_A Data095002.041.txt ‏19 KB

Updates not been run for months

First, I'd say make sure WSUS is still syncing with MS, and then download and enable my script.http://community.spiceworks.com/scripts/show/2998-adamj-wsus-cleanupAdjust this variable to today's date (21)
[int]$AdamjDeclineSuperseededUpdatesWhatDayToRun = '1'Run the script and change it back to 1.This will start you off with the best possible (and least number) of updates you need to approve. Then do them 10 a day (after reading what they do).
Inside of Options, go to Automatic Approvalssee what's in there. you can set it up to "When an update is in critical updates, security updates""approve the update for all computers"enable that, and modify it how you want.

Ok,I started this job about a month ago, I discovered a WSUS server a little while ago and have just managed to get some time to have a bit of a closer look at it- I can't say I'm overly chuffed with what I've discovered - no updates have been approved since the end of Feb, some of the machines are in need of hundreds of updates. I've confirmed this by looking on a couple of client machines which haven't been updated since end of Feb. I've also got some updates from Mid 2014 that haven't been approved - no idea if these weren't approved for a reason by the last guy.I don't really want to approve them all now - don't think I'm going to be too popular when people close down their computers at the end of the day and they have to wait for a couple hundred updates to install.Any advice as to how best approach this and get these machines up...
This topic first appeared in the Spiceworks Community

Tables Updatation in BDLS run

Hi All,
Looking at the BDLS run logs on our SAP system, looks like only a small number of tables are updated among the tables it checked. For example:
ECC: 90 out of 1537 tables were updated
CRM: 85 out of 1683 tables were updated
BI: (for ECC), 48 out of 830 tables were updated
(for CRM), 86 out of 830 tables were updated
I was thinking if we can specify the tables to be converted, then the BDLS run will be much faster. But then wonu2019t know for sure which tables to specify.
So please suggest is there any way to figure out the table name which will be Updated by BDLS run so that we can mention those table names only in BDLS execution and reduce its execution time.
Regards,
Shivam Mittal

Hi,
Having Indexes on the big tables helps a lot.
if you have the resources, create them in parallel with
create index .... compute statistics online nologging parallel 12;
This way the stats are sampled during creation and there is no need for additional stats calculation.
Do sql monitoring while BDLS runs to detect the expensive statements that need adjustment
I have a system down to 35minutes from 16 hours.
I need 45 Minutes to create all indexes beforehand (most of them take 1-3 minutes with parallel 12) with sqlplus.
So it is a 14+ hours gain.
Having noarchive mode during bdls helps, if you have really many record to convert like
on BW systems or with a big workflow usage.
Volker

Which 10.4.8 update do I run?

Similar Messages

Maybe you are looking for