Which table to fetch cost center (KOSTL) from(material cost estimation )??

Hi..
i am going to create a report to display material cost estimate.
it has two selection screen parametrs..(matnr and werks)..
i need to display cost center as the output of the report..
which tables shud i fetch from??
and what is the logic??
can sum1 plz provide the code??

<b>now hw can i get cost elemnts of the cost center..</b>
   am not sure if this will work as all the key fields are not given in where condition, anyways chk our
  select single setname
           from setleaf
           where valfrom LE p_kostl and
                    valto GE p_kostl and
                    setclass eq '0101'.

Similar Messages

  • Can a cost center reassign to another cost center group

    Dear Expert,
    Does SAP allow a cost center reassign from one cost center group to another cost center group in this scenario the particular cost center which going to reassign to another cost center group have posting into the cost center?
    Please advise how to reassign and what is the impact?
    Please help
    Regards,
    Karen

    Hi,
    Thank you for the prompt reply.
    Would like to seek for your advise.
    The cost center that we need to reassign to other cost center group will it carry the cost from the previous cost center group to a new cost center group?
    Please advise.
    Thank you.
    Regards,
    KH

  • FV 60 document is stored in VBKPF table. I would need cost center KOSTL

    When parking FI document in transaction FV 60 document is stored in VBKPF table. I would need cost center KOSTL. this is not entered in table VBKPF.
    Where could I find KOSTL and what is connection

    BSEG

  • Extracting cost center data from two tables

    Hi Everyone,
    I'm trying to extract cost center data from two different tables in SAP and pull it into one InfoObject.  I'm using 0costcenter and it's already extracting data from one of the tables I need.  Could someone explain how to add the second table? Thank you.

    You can create a Generic Extractor , Create a view on 2 tables with proper join condition n use this to load 0COSTCENTER.

  • Cost Center Inheritance from Org Unit

    Good day all,
    Can someone please advise regarding cost center inheritance from org units?
    I understand the inheritance concept, however simple need to know if the CCenter is added to the org unit via A011 relationship, does the system physically create a A011 relationship on the position inhertiting the cost center from the org or does the system simply pick up the realtionship from the org unit relationsip for use in IT0001 field KOSTL (cost center)?
    Thanks guys, have a lovely day!
    Christy

    Hi Christy,
    As we know cost centre(K) is an unusual object in OM.Two type of objects internal  whose master record are in database table beloging to sap erp hcm and eexternal object whose master data belong to other application areas.Cost centre is an external object that is used to represent origin of costs.Inheritance concept is on the basis of whoch cost centre are assigned in org plan.
    directly related cost centre is called master cost centre and they are made via A011 cost centre assignment relationsip.they can be made at org unit,position or work centre and nornmally its org unit that common.Org unit at the top are asisgned the cost centre as a best practise so that all the org units below or reporting will inherit the same.
    Similarly multiple cost centre assignments can also e made through 1018 infotype(cost centre distribution).Inheritance also applied to them aswell.
    Hope this helps.
    No Worries
    KG

  • Table for Material-Cost center-Settlement Rule_REM product cost collecter

    I want to generate a report to see for particular material which cost center and which settlement rule is available.
    If we go in Product cost collecter (PCC) there we have an option to see settlement rule under header tab, I want to fetch that data for material as selection parameter, can anyone suggest how to get the data as,
    Material        Cost Center        Settlement Rule
    Thank you.
    Regards,
    Deven

    Hi,
    pleasefind tables related with cost.
                          TKA01               Controlling areas
                         TKA02               Controlling area assignment
                         KEKO               Product-costing header
         KEPH               Cost components for cost of goods manuf.
         KALO               Costing objects
         KANZ               Sales order items - costing objects
         Cost center master data
                        CSKS               Cost Center Master Data
                        CSKT               Cost center texts
                        CRCO               Assignment of Work Center to Cost Center
                        COSP               CO Object: Cost Totals for External Postings
                        COEP               CO Object: Line Items (by Period)
    .     COBK               CO Object: Document header
         COST               CO Object: Price Totals
    Regards
    SANIL

  • Bring profit center and cost center  hierarchy from R3 to BW in BI 7.0

    Hello,
    I need to get the hierarchy from R/3 to BW. Can someone send me a link or mention steps i need to do to bring profit center and cost center hiearchy from R3 to BW.
    Thanks
    Laura.

    As you would for any other infoobject
    Activate the business content hierarchy datasources on R3 for cost centre and profit centre
    Go into BW - replicate the metadata
    Then just connect via transformations or transfer rules the datasources to yoru infosources or master data objects
    Create an infopackage per hierarchy!!!!! - press the button available hirachies from OLTP - click the one you want on the left - fire it off
    Then repeat new infopackages for all hierachies

  • Messg-AAPO189 :Account object Cost Center differs from that in asset master

    At the time of Asset Acquisition in T-Code F-90 using Internal order, the system throws the following error:
    Message-AAPO189  :Account object Cost Center differs from that in asset master
    But in Asset Master data and Internal Order Master data's Cost Centers are same. 
    And we are not facing this problem for all Assets (only for few asset class only we are facing this error).
    Please guide on this.
    Note:
    We are not using Joint Venture Accounting.
    Regards
    JS
    Edited by: JS on Aug 12, 2009 7:14 PM

    Closed

  • Open field for cost center on the material master

    We have a unique requirement in a facility we intend to implement plant maintenance in to track a cost center to a material by including the cost center on the material master somewhere.  Cost center is not a field on any of the material tabs we use for maintenance materials, but the requirement is just that it is tracked in a field, even if it's just an open field like a "user defined field" or another field not used often.  We realize there are disadvantages such as the field not being checked against active cost centers, but we are looking at options short of adding cost center as a field manually to a tab (which I believe would require ABAP assistance).  I don't think there are any other fields/tabs we are currently not utilizing but I could be wrong... The best option we can think of is adding it in a material characteristic so it shows on the classifications tab, but I thought I would see if anyone has any other ideas.
    Thanks

    Not sure what is the need of cost center on material master when you want to implement Plant maintenance module. Do you have any specific requirement for this?
    Ideally cost center will be derived from either functional location/ equipment (equivalent of material master) on to PM work order or notification.
    Can you elaborate the requirement?
    After all if you wish to go with cost center, then I suggest it should be at plant level as PM requires plant level distribution. You can add up a custom field and give the reference of cost center data element with help of developer.

  • Can 2 cost center group share same cost center?

    Dear Experts,
    Can 2 cost center group share the same cost center? 
    Basically I'm looking at MATRIX structure where one cost center, say an Equipment shared by 2 different cost center groups (say one in "Location-A" cost center group, and the other one is in "Process-A" cost center group).  This is to enable the management to be able to see the costs incurred in either by "Location" cost center group or "Process" cost center group.
    The "Location-A" cost center group may tied to Cost center 101, Cost Center 102 and Cost Center 103.  The "Process-A" cost center group may only tied to Cost Center 101, and other cost center 201 (which is also tied to other "Location-B" cost center group).
    Please advise.
    regards,
    Abraham

    Hi Abraham,
    its not possible to assign a cost center to several cost center groups in the standard hierarchy. Otherwise, the standard hierarchy would be inconsistent.
    As stated in the online documentation under http://help.sap.com/erp2005_ehp_05/helpdata/EN/25/908fc66d8411d194f000a0c93031df/frameset.htm
    'You can assign each cost center to only one group in the standard hierarchy, but to as many alternative groups as you require.!
    Regards,
    Greta

  • Adding cost center on OKB9 with cost element company code with valuation ar

    hi ,
    can anybody help me out with the Adding cost center on OKB9 with cost element company code with valuation area configuration.
    i have to do this configuration but do not know the detailed steps for that one.
    Good points will be awarded.

    Hi Prem
    Select the 1 in column acct assignment details column then in the left side in detail per business area/valuation area enter your valuation area.
    Thanks
    Ashok

  • Cost center (KOSTL) is not updating in HR master table for infotype 0001

    Hi ABAP gurus,
    We have one interface where we are posting the HR master data using the IDOC (IDOC_INPUT_HRMD) into SAP.
    While updating cost center, We have one issue regarding infotype 0001.
    It is working fine for all the fields except: KOSTL, ORGEH, STELL.  Surprisingly the created IDOC contains the value in these fields but it is not getting updated in master table PA0001. I have tryied inserting the value manually and it is working fine and tried with BDC Programming and no issues. Only we have this issue while we want to use the IDOC. This is mandatory in our interface.
    While debugging the IDOC function module I found that one condition is there for these three fields.
    CHECK NOT inte IS INITIAL. where inte value is being fetched from table t77s0 based on
    GRPID = PLOGI
    SEMID = ORGA
    In this condition I see no value for this combination and hence it is not getting further. I am not sure how this condition does exist for only these three fields and not for others.
    Can any please provide the reasona and solution for this.
    Appreciate the help in advance.
    Thanks,
    Jitender

    Dear Mohan,
    Try assigning your cost center to position it will default both your org unit and cost center.
    Cheers!

  • How to find the cost center group from cycle/ segment in CO module?

    Hi All,
    I need to fetch the list of cost centers in the cost center group against the cycle.
    Is there any table which will store the list of cost centers against the cycle?
    or else, what I was thinking is use of BAPI BAPI_COSTCENTERGROUP_GETDETAIL, which will give me the list of cost centers,
    but we need to pass the controlling area + cost center grp to fetch the cost centers from BAPI, I have controlling area with me but not the cost center grp name, only I have Cycle info lke cycle name, segment name, seq number. so how to find the cost center grp name from the cycle name?
    Regards,
    Mrunal

    FM: RK_AL_CYCLE_READ
    CHECK TABLE: T811K

  • How to receive the cost center group from legacy system

    Hi Experts,
    i need to collect  cost center group hierarchy from Legacy system.is there any standerd tcode available to get it.
    Usefull answers will be rewarded.
    looking forward to hear from all.
    regards,
    Tom

    Hi,
    Cost Center group can be viewed from field SETCLASS of table SETLEAF.
    To Fetch the relevant cost center from a cost center group, we can use FM: 'K_HIERARCHY_TABLE_READ'.
    Below thread may give you more details.
    Cost Center Group
    Regards,
    Ranjith.

  • Cost Center derivation from multiple statistical account assignments

    Dear all,
    I have
    a) a statistical internal with actual posted cost center A and
    b) a statistical WBS with actual posted cost center B.
    When posting with both (a) and (b) the cost center derived is from the statistical order. Is there a way to influence from which object the cost center will be derived.
    Kind regards,
    Orestis

    Hi Orestis,
    You can use substitution (OKC9) setting prerequisites as both internal order and WBS are filled and substituing the cost centre by the value from PRPS table.
    Regards,
    Eli

Maybe you are looking for

  • When i click on download itunes it says this

    The webpage athttps://swdlp.apple.com/iframes/82/en_us/82_en_us.html might be temporarily down or it may have moved permanently to a new web address. Error 501 (net::ERR_INSECURE_RESPONSE): Unknown error. but then i clicked on the link in this questi

  • Advice on buying AV amp and wiring for Audig

    Hi: I just got a Dell 8400 (P4- 3Ghz) with MS Media Center 2005. It has a Dell Audigy 2 card. I have an entertainment center with a 42" Monitor and a 6 yr old Pioneer AV/Dolby amp that is toast. The speaker system is a Bose Acoustimass 7 for both fro

  • How to disable photo-downloader for ever ?

    Hi there, after installing Photoshop Album Starter Edition 3.0 my PC always shows an active downloader icon in the systray. I don't want this program to run for ever (or at each startup). Even deactivating is only valid until the next reboot. How can

  • External Drive oddities

    I've got an external portable drive that I've been using both as a backup and my iTunes library. Yesterday, my internal drive necessitated a wipe, and after checking my backup to make sure it was up to date, I did as such using my TechTool Pro eDrive

  • VSS MEC to different vendor devices

    Hello: I am configuring a VSS using two 4507R with dual supervisor, and I'd like to know whether MEC supports a different vendor's device in the other end. To be specific,  I need to connect this VSS to a non-Cisco firewall. If this firewall supports