While transferring my documents from my Desktop to my new Apple laptop through a memory stick all of my files on my Desktop were lost. What Happened?

While transferring my Documents from my desktop to my new Apple laptop through a memory stick all of my documents were lost. I cannot find them anywhere...What happened?

If I'm reading this right, you copied the Documents folder from your User account to a memory stick? How big was the Documents folder?
How did you carry out the copy?
Drag and drop from user account to stick? - This should copy the data leaving the originals on your desktop Mac.
⌘-drag from user account to stick? - This would move the files - copy them over, then delete the originals.
Entire folder at one go or a few files at a time?
Assuming that you used the memory stick as received (straight out of the pack) it would almost certainly be formatted FAT32 or even FAT16 so it can be used onWindows or Mac. There are file size limits with both those formats, which could cause problems, but I'm not sure complete loss of data would result.

Similar Messages

Transferred appleworks documents from emac to new iMac and can't open. what app can i use or get? help! i'm not computer literate.

I TRANSFERED APPLEWORKS DOCUMENTS FROM AN eMAC TO A NEW IMAC AND CAN'T OPEN THEM. THE MESSSAGE STATES THERE AR NO APPS GO TO THE APP STORE. WHAT DO I NEED TO PURCHASE OR GET? I'M NOT A COMPUTER GUY BUT I WANT MY RECEPIES AND STUFF. HELP

Welcome James!
For no cost, you can try the open-source productivy suite LibreOffice. I don't have any AW files here to test but there are reliable reports that LibreOffice can open at least some AW files:
http://www.libreoffice.org/discover/libreoffice/
Please turn off your caps lock key. All-caps text is harder for us to read and is considered "shouting" or "anger" by most internet text conventions. Thanks!

Short dump in queue while transfering billing document to the ECC.

Hi,
While transferring billing document to ECC we got the error SYSFAIL and The running application consciously caused an abort.
please find the attached ST22 dump and do the needful. Please give th mail id i will send dump.
Information on where terminated
    Termination occurred in the ABAP program "SAPLCOINT_TP" - in
     "COINT_TPOST_IT_INSERT".
    The main program was "SAPMSSY1 ".
In the source code you have the termination point in line 92
    of the (Include) program "LCOINT_TPU03".
62     EXPORTING
63       T006_MSEHI = I_MEINH
   64     EXCEPTIONS
65       NOT_FOUND = 1.
   66   IF SY-SUBRC = 0.
   67     LS_COINT_TPOST_IT-MEHT = I_MEINH.
   68   ENDIF.
69   LS_COINT_TPOST_IT-BETRG    = I_BETRAG.
   70   LS_COINT_TPOST_IT-CURRENCY = I_CURRENCY.
   71 * Additional data
72   LS_COINT_TPOST_IT-MANDT = SY-MANDT.
   73   IF NOT I_DATE IS INITIAL.
   74     LS_COINT_TPOST_IT-BDATE = I_DATE.
   75   ENDIF.
76   LS_COINT_TPOST_IT-REVERSE = I_REVERSE.
   77   LS_COINT_TPOST_IT-VORGNG   = COINT_BILLING.
   78 * Derive BUZEI
79   SELECT MAX( BUZEI ) FROM COINT_TPOST_IT INTO LD_BUZEI
   80                                           WHERE GUID = I_GUID.
   81 * begin insert note 1003536
   82   SELECT SINGLE * FROM COINT_TPOST_IT INTO LS_COINT_TPOST_IT_OLD
   83                   WHERE GUID = I_GUID
   84                   AND   BUZEI = LD_BUZEI.
   85
86   CLEAR LS_COINT_TPOST_IT_OLD-BUZEI.
   87   CLEAR LS_COINT_TPOST_IT_OLD-TIMESTMP.
   88   CLEAR LS_COINT_TPOST_IT_OLD-PROCESSED.
   89   CLEAR LS_COINT_TPOST_IT_OLD-CHANGED.
   90
91   IF LS_COINT_TPOST_IT = LS_COINT_TPOST_IT_OLD.
>>>>>     MESSAGE TEXT-X01 TYPE 'X'.
   93   ENDIF.
94 * end insert note 1003536
   95
96   ADD 1 TO LD_BUZEI.
   97   LS_COINT_TPOST_IT-BUZEI = LD_BUZEI.
   98 * Get TIMESTMP
99   PERFORM GET_TIME_STAMP CHANGING LD_TIMESTAMP.
100   LS_COINT_TPOST_IT-TIMESTMP = LD_TIMESTAMP.
101 * Update COINT_TPOST_HD
102   IF NOT LD_INSERT_HD IS INITIAL.
103     CALL FUNCTION 'COINT_TPOST_HD_INSERT'
104       EXPORTING
105         I_GUID = I_GUID
106         I_OBJNR = LD_OBJNR
107         I_KOKRS = LD_KOKRS
108         I_DATE = LS_COINT_TPOST_HD-BDATE
109       EXCEPTIONS
110         OTHERS = 3.
111   ENDIF.
Best Regards,
Prakesh

Hi,
Can you plz help in my issue .
Dear Gurus,
Find the below scenario followed by us.
1.Created the service order with the ZSR3 procurement item category.
2.PR created for the service order 35035201 in ECC with no 0070088937.
3.One queue is struck with the below details.
4.If we re process the queue it will process with out any error and then only our document flow of the CRM service order line item.
Plz check the queue name R3AD_CRM_SRV_0035025201 in CRM system from
Tcode SMQ2 which is in SYSFAIL status. The corresponding BDOC in SMW01
tcode has validation error message " Module CRM_SRV_EXT_VAL, BDoc type
CRM_SRV_XTN. Message no. SMW3018 " . Plz advise.
As per my understanding and debugging i think it might be a issue
As a standard CRM any change/update in ECC document 0070088937 should
send back the information to the source CRM document with header GUID
4E6527B4D3070C10E10080000A8C6828 . But system is referring to a
different GUID where there is no document exist in CRM.
Pls find the root cause to trigger different GUID when information is
passed from ECC to CRM system.
Best Regards,
Prakesh

Problem in transfering the Document from CRM to R/3

Dear CRM Experts,
I am working in CRM 2007.
we connected the CRM 2007 with R/3.
In CRM we creating the Service order -> Service Confirmation -> Return Order.
When we create the Return Order in CRM it Copies the Document and creates the Same Return order in R/3.
But in our case it is not creating the return order in R3 and i am getting the Error message
"An error has occured in the system R22CLNT787 while copying the document
Message no. CRM_ORDER_MISC 020
Diagnosis
Errors have occured while transferring the document into another system. Remove the error messages from the enclosed log.
Transmission log
Object link not known in CO (Notification E IAOM 019)"
Please help me to solve this problem.
Thanks & Regards,
Ashok

We had a similar error in transferring documents in the other direction, from R/3 to CRM. During the transfer, SAP carried out the following steps:
1. Transfer R/3 object to CRM
2. Create 1Order Object in CRM
3. CRM send BOR object (log sys, GUID, obj type) of 1Order Object to the R/3 object
4. R/3 attaches the BOR object under linked objects
5. R/3 sends a response with the success/failure of the operation in Step 4.
6. CRM receives the message and writes it to a log
We were missing Step 4. (We are using Case Modeller in R/3 FSCM Dispute Management, so we had to attach/activate the link between R/3 and CRM in that step).
Check CRM transaction SMW01 to see your message logs. Perhaps they will offer more insight.
Thanks,
Ben
We found that we were missing table entries in the

Error in ERP system while copying the document from CRM system

Hi Friends,
I have created a CRM sales order in CRM Web Ui or Gui. I am getting this Errors.
Diagnosis
Errors occurred while transferring the document into another system. To view the error messages, see the enclosed log.
Transmission log
u2022     Product cannot be recoded for ERP System (Notification E CRM_ORDER_MISC 015)
u2022     Product cannot be recoded for ERP System (Notification E CRM_ORDER_MISC 015)
u2022     No customer is assigned to business partner 417283 (Notification E CRM_BUPA_MAPPING 002)
Please give suggestions what can i do for this.Please specify clearly the required steps to debug this error
also
with respect to first error ,I tried to replicates the product from crm to ERP system in COMMPR01(Send to ERP Option), but it has given this error.
"input data for industrial material is not fully"
regards,
sunil

Hi Sunil,
You are getting error in the Sales Order is because of Master Data.
Sales Documents will flow from CRM to R/3 when master data is consistent in R/3 & CRM side.
Please maintain the master data in R/3 side & download into CRM Side.
For Customer use adpater object CUSTOMER_MAIN & for Material object is "Material"
Use following link for downloading Customer Master & Material master.
http://help.sap.com/saphelp_crm20c/helpdata/en/4D/CFF837A9AAE651E10000009B38F8CF/frameset.htm
http://help.sap.com/saphelp_crm20c/helpdata/en/67/bdcbe77d9611d396bd00a0c930e0da/content.htm
Best Regards,
Rajendra

Errors have occured while transferring the document into another system.

Hi GURUs,
Please help me to come out from this problem........
An error has occured in the system YDQCLNT100 while copying the document
Message no. CRM_ORDER_MISC 020
Diagnosis
Errors have occured while transferring the document into another system. Refer to the attached log for error messages.
Transmission log
Product cannot be recoded for R/3 System YDQCLNT100 (Notification E CRM_ORDER_MISC 015)
Product cannot be recoded for R/3 System YDQCLNT100 (Notification E CRM_ORDER_MISC 015)
Please suggest something ASAP....
i'll be highly Grateful to you.....
Regards,
Ankur

Hi Gangadhar,
Can you plz explain me elaborately, where should i check for partner function of the equipment and how this partner function is related to this issue.
I think partner function will be there only for BP. Can you plz clarify me.
Thanks in advance
Ankur

Getting error while opening Excel document from SharePoint site

Hello All,
I am getting following error while opening Excel document from SharePoint site.
This issue appears when we open Excel document from Windows>> Run using below mentioned command:
Excel.exe "{File Name}"
If once I go to Excel back stage and browse for the SharePoint location, then this problem disappears.
I have a work around for this issue but main problem is that i do not have any work around when i need to open Exel document using Excel COM interop in C#.
Thanks,
Amit Bansal
Amit Bansal http://www.oops4you.blogspot.com/

Hi Amit Bansal,
Thanks for posting in MSDN forum.
This forum is for developers discussing developing issues involve Excel application.
According to the description, you got an error when you open the document form SharePoint site.
Based on my understanding, this issue maybe relative to the SharePoint, I would like move it to
SharePoint 2013 - General Discussions and Questions forum.
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us.
Thanks for your understanding.
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Heap space error while creating XML document from Resultset

I am getting Heap space error while creating XML document from Resultset.
It was working fine from small result set object but when the size of resultset was more than 25,000, heap space error
I am already using -Xms32m -Xmx1024m
Is there a way to directly write to xml file from resultset instead of creating the whole document first and then writing it to file? Code examples please?
here is my code:
stmt = conn.prepareStatement(sql);
result = stmt.executeQuery();
result.setFetchSize(999);
Document doc = JDBCUtil.toDocument(result, Application.BANK_ID, interfaceType, Application.VERSION);
JDBCUtil.write(doc, fileName);
public static Document toDocument(ResultSet rs, String bankId, String interfaceFileType, String version)
    throws ParserConfigurationException, SQLException {
        DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
        DocumentBuilder builder = factory.newDocumentBuilder();
        Document doc = builder.newDocument();
        Element results = doc.createElement("sims");
        results.setAttribute("bank", bankId);
        results.setAttribute("record_type", "HEADER");
        results.setAttribute("file_type", interfaceFileType);
        results.setAttribute("version", version);
        doc.appendChild(results);
        ResultSetMetaData rsmd = rs.getMetaData();
        int colCount = rsmd.getColumnCount();
        String columnName="";
        Object value;
        while (rs.next()) {
            Element row = doc.createElement("rec");
            results.appendChild(row);
            for (int i = 1; i <= colCount; i++) {
                columnName = rsmd.getColumnLabel(i);
                value = rs.getObject(i);
                Element node = doc.createElement(columnName);
                if(value != null)
                    node.appendChild(doc.createTextNode(value.toString()));
                else
                    node.appendChild(doc.createTextNode(""));
                row.appendChild(node);
        return doc;
public static void write(Document document, String filename) {
        //long start = System.currentTimeMillis();
        // lets write to a file
        OutputFormat format = new OutputFormat(document); // Serialize DOM
        format.setIndent(2);
        format.setLineSeparator(System.getProperty("line.separator"));
        format.setLineWidth(80);
        try {
            FileWriter writer = new FileWriter(filename);
            BufferedWriter buf = new BufferedWriter(writer);
            XMLSerializer FileSerial = new XMLSerializer(writer, format);
            FileSerial.asDOMSerializer(); // As a DOM Serializer
            FileSerial.serialize(document);
            writer.close();
        } catch (IOException ioe) {
            ioe.printStackTrace();
        //long end = System.currentTimeMillis();
        //System.err.println("W3C File write time :" + (end - start) + " " + filename);
    }

you can increase your heap size..... try setting this as your environment variable.....
variable: JAVA_OPTS
value: -Xms512m -Xmx1024m -XX:PermSize=256m -XX:MaxPermSize=512m

Error while transferring the document

Hi Friends,
We are getting an Error when we try to create a service confirmation.The error is an 'Error has occurred while transferring the document'.When we see in the transmission log it is telling inconsistent update flags.
How can the error be removed?
Regards,
Jay.

Hi Jay,
Try doing this once again and go to Tcode SMW01 and try to locate your Bdoc. First it will be in yellow state and it will turn red (error).
Once you get the error Bdoc, check the error messages in it (there is proper button on the top to get this). You might get the cuase of the error in Bdoc messages itself.
If not, post me the Bdoc status and the Flow Context.
Regards,
Alin

Changing billing document date while creating billing document from vf01

Hi gurus,
I have requirement to change billing doc date while creating billing document from VF01.
here I have to consider goods issue date eq billing date.
caluculating billing date = Goods Issue + Goods in Transit duration time.
I have done everu thing but I cant update the caluculated date, iam using the following enhancement
Enhancement:SDVFX001
Function Module:EXIT_SAPLV60B_001
Include:ZXVVFU01 which are part vf01.
here iam sending the calculated date to VBRK-FKDAT
move cal_date to vbrk-fkdat.
need help how to update the calculated date to VBRK-fkdat i.e billing document date
Regards
Bhaskar

Hi
No! That exit is not good for your issue
U can use the user-exit USEREXIT_NUMBER_RANGE_INV_DATE defined in RV60AFZC
Max

Change in document type while creating billing document from sales order

While creating billing document from Sales order it is creating with document type RV which is standerd one but i want to change Document type.
How can i change it?
Regards
Raj

Hi
If you use another existing document type, check that it has a number range suitable to you. Else create a new 'z' type and assign an entirely new number range, not used in the other doc types.
It is useful to make the FI document number the same number. If I understand from the forums, the FI number range must be external. Search the forum for this. It is very useful for the Finance people.
Kind regards
Dawn
Edited by: Dawn Verrell on Sep 9, 2010 4:10 PM

I have a FreeAgent Goflex drive (for Mac) after a while the icon disappears from the desktop and can only be restored by reconnecting

I have a FreeAgent GoFlex backup drive (for Mac) after a while the icon disappears from the desktop and can only be restored by reconnecting the firewire. This also happens when I use the USB connection as well. Thanks

Did you use any of the "sleep" drivers supplied? I have found it best to just totally reformat/erase the drives and let the OS handle them.

Transfering- copying documents from IMac to MacBook Pro - Migration Assistant or High Speed File share cable- which would be faster?

I started Migration Assistant to copy documents from my IMac to my new MacBook Pro - it started off saying "About 53 hours and 40 minutes remaining" to "About 64 hours and 47 minutes remaining" - I have a High Speed File Share Cable - should I have used that?

If you mean a FireWire cable, yes.
Your best bet is to start over. See the green box in Problems after using Migration Assistant

Transferred itunes library from Windows XP PC to new Windows 7 PC. plugged in 3rd gen Ipod. Ipod icon appears along with playlists, music etc. Songs are grayed out and won't play. Please help!

I recently transferred itunes library from windows XP PC to new Windows 7 PC. The transfer was successful, however when I plug my 3rd gen Ipod Nano into the new PC, the Ipod icon appears along with the music, playlists, etc. The songs are shown but are 'grayed out' and wont play or sync.The 'Devices & Printers' window in new PC shows icon for Ipod driver & is OK. The icon for the Ipod appears but depicts a delta shaped warning icon that states that the Ipod is'not operating properly'. Tried troubleshooting. The troubleshooting message states the the Ipod is 'disconnecting'. Can you help me with this problem?

Then, I dropped the entire itunes file from the old PC (XP) into an empty external drive.
That "itunes file from the old PC"? Is that the iTunes folder, from the old PC, that was in the user home folder's Music folder?
All of the library, playlists, etc. from the ipod as they always have been are shown, by they are 'grayed out' and will not open or play.
That's on the iPod, correct? Are all of your old playlists in iTunes, from the old PC, still there in iTunes on the new PC? Are the songs in iTunes still playable?
This document provides the steps to transfer a complete iTunes library between two computers. See the section called External drive.
iTunes: How to move your music to a new computer - Apple Support
There are many steps, but this is a summary. (1) On the old PC, consolidate all of your iTunes data into the iTunes folder. (2) Copy this iTunes folder to the external drive. (3) On the new PC (that has iTunes installed but NOT running), replace its existing iTunes folder with the one from the old PC (on the external drive). When you run iTunes, it uses the iTunes folder from the old PC, and it should look like iTunes on the old PC (with all the playlists, ratings, play count, etc.), and your iPod will see the iTunes library as the same iTunes library (because it is the same library).
If you did something different, and the old PC is still accessible, you may want to try it using the method from the linked document.

To open a pdf document or word document from a JSP into a new window

Hi,
How to open a PDF document or word document from a JSP into a new window. i.e say from a jsp when a hyperlink or button is clicked it should open a new window with the pdf document or word document in it.
thanks in advance,
radki_j

Hi ,
when i tried to use the below code to open my word document , it will open as html and with some garbage details. Doesnt open as word document. How to solve this kind of probem?Need advice urgently.
Open Document

While transferring my documents from my Desktop to my new Apple laptop through a memory stick all of my files on my Desktop were lost. What Happened?

Similar Messages

Maybe you are looking for