Why are bonjour print jobs 'disappearing' under Lion?

I have a iMac running Lion. It has a Canon printer attached via USB. I share that over the network.
For work, I have a Win7 (64) machine. It connects to my home network (wireless). I installed Bonjour for Windows from Apple onto that machine.
It seems the shared printers, no problem. I installed the Canon printer driver on Windows.
Using the Bonjour wizard, I created a printer on WIndows and pointed it (via Have Disk) to the printer driver.
When I print, the Win7 device sends the job to the Mac. I see the job in the Printer Control panel, showing all jobs.
It shows as completed BUT never gets sent to the printer.
If I look in the System Information, Printer Error log, I see one message around the time I sent THREE jobs:
E [08/Feb/2012:08:50:56 -0500] Missing printer-uri, job-uri, or ppd-name attribute
E [08/Feb/2012:08:50:56 -0500] Returning IPP client-error-bad-request for windows-ext (no URI) from [v1.fe80::79b5:d75c:5f0e:797d+en1]
Anyone know how to get this to work?
Seems like it is all Apple Software at work here... I hope I can get this to work.

FWIW, I've had similar issues with Lion and have finally just turned everything related to Spam off, so that all my emails go into my inboxes.
My guess was that there was some behind the scenes process deciding that some mail I wated to keep was spam on one of my comptuers, but not on another. Since all the the email accounts are IMAP, when i do delete an email from one comptuer, it gets deleted from all of them, but at least now I get to decide what gets deleted and what doesn't. More work for me, yes, but at least emails don't go missing anymore..
Mail in Lion is not problem free.

Similar Messages

Why do print jobs disappear and never make it to the queue.?

Win 7/64 SP 1.... legacy Lexmark X6675 printer/copy/scanner/FAX ....USB wired connection. Windows on auto update. IE 11.
Printer was working fine until 2 weeks ago. Will not print anything now. Rest of "4 in 1" works fine. I get no messages either on the printer or computer that anything is wrong. All Microsoft scans say all is OK including Mr. FixIt.
Did complete file scan through command prompt nothing wrong. Have stopped and started print spooler which was empty. Have run virus scan and scanned with Malwarebytes ....nothing.
Will print OK on an XP machine. Will print a test page from it's install program but will not print a test page from within Windows 7. Print jobs disappear and never end up in queue from all programs I have, MS Works 9, Notepad, Wordpad, Acrobat reader,
Microsoft Paint. Installed new inexpensive Canon printer on computer and it works fine. All hardware I believe is OK. Problem IS software.
I have reinstalled the program 3 times. 2 times through Microsoft auto up date, once by downloading driver program from Lexmark and setting up as a "new" set up.
Any assistance will be appreciated.

Hi，
Since this problem occur 2 weeks ago, the easier way to get it back is using system restore to roll back to a previous time when everything works fine.
If you have no system point, let us know what scan and "fix it" tool have you tried?
Firstly, run Printer troubleshooter:
Open the Printer troubleshooter by clicking the Start button, and then clicking
Control Panel. In the search box, type troubleshooter, and then click
Troubleshooting. Under Hardware and Sound, click
Use a printer.
Next, uninstall it from Device Manager completely and then rename the spool printer and driver files:
1. Open Command Prompt with administrator.
2. At the command prompt, type the following commands (press ENTER after each)
3. Rename %systemroot%\System32\Spool\Printers Printers.old.
4. Rename %systemroot%\System32\Spool\Drivers\w32x86 w32x86.old
Reinstall it again and make sure get the latest and proper driver from Lexmark.
Karen Hu
TechNet Community Support

Why do my print jobs keep cancelling? Internet is connected. On ePrint centre printer shows read

Why do my print jobs keep cancelling? Internet is connected. On ePrint centre printer shows read ??

Hi jmarc11,
Welcome to the HP Support forums. I understand that when you send a print job to your HP printer via ePrint that it cancels the print job.
To better assist you, would you please provide some further information:
1)    What make/model/product number of HP printer do you have?
2)    How is the printer connected (USB cable, ethernet or wireless)?
3)    Are you sending the print job from your computer or a mobile device? If you are using a mobile device are you using an app like the HP ePrint app or HP AiO app?
4)    What is the operating system of the device you are using to send the print job?
Thank you.
Guide to finding your product number
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Why do my print jobs keep cancelling? Internet is connected. On ePrint centre printer shows ready

Why do my print jobs keep cancelling? Photosmart D110. Internet connected. Shows connected and ready. Get email saying received. It cancels immediately. This is something new. It was printing fine.

Hi, there sorry to learn that you are having this issue.
Let me start by saying this is what I heard from other members of the forum.
I heard here (other members of the community) that there is an issue that engineer are working on diligently that may be affecting this particular process. All of the suggestions in this page have help members of this forum with this situation hope that one of them helps you.
- Reboot the computer.
- Open the browser (Internet Explorer, chrome, FireFox, Safari,Opera ) of your preference and clear cookies and internet (Browsing) history.
-In the browser of your preference try singing-in or registering to e-print.
If the above did not solved your issue, Please try this;
- Use another browser (Internet Explorer, Chrome, firefox, safari, Opera) and try again.
If you are willing to try a test,
-Disable all Security Applications on your computer including Windows Firewall and try to see if there a process getting block while the printing process is going on.
other quick suggestions unlikely to be related in your particular case;
-Set an static IP Address for your printer,
This should be done outside the DHCP range (the range that your router uses to automaticly assing leasses to the clients or devices connecting to the network).
- Use Google public DNS Servers;
8.8.8.8 and alternate 8.8.4.4 (the reason that I recommend this is because I have use them all the time and have not seem conflict of any kind)
- Make sure that your printer have the most current firmware and software available for them
(remember most of the updates in firmware and software are to FIX ISSUES and in a lesser degree done are to add functionality). The issue that you having may have been fix in a firmware update.
- Make sure that your Operating system is updated.
(To a lesser extend this are also updated to FIX ISSUES although some times can create them as well, mostly they are updated to patch security issues) it may be important.
Hope this helps;
RobertoR
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Why are HP printer cartridges country specific? Is there any way around this?

I have just moved from the UK to Newfoundland, Canada and I have brought my HP PSC 1610 printer with me. I was advised not to bring any cartridges with me because they would explode during the flight so I had to buy new cartridges upon arrival.
I noticed that the cartridge numbers recommended for my printer were similar but not exactly the same but the (HP, etc.) websites I looked at did not mention that HP printer cartridges country specific.
In the UK black cartridge is an HP338 (C8765EE).
In Canada the websites told me that the black cartridge is a 94 (C8765WC).
I ordered a 94 cartridge (which took an indordinate amount of time to be delivered) and when I installed it my printer would not accept it ("not intended for use in this printer" error message) even though it fit perfectly. I looked at the packaging in greater detail and noticed that I had been sent a 94 (C8765WL) and I also noticed (in a very small font size) "for sale only in Latin America".
My questions are therefore:
1) Why are HP printer cartridges country specific?
2) Is there any way around this? Eg is there anything I can do to my printer/ laptop to tell it to accept this cartridge?
3) Are 94/ C8765WL cartidges compatible with 94/ C8765WC cartirdges? Ie did the supplier sell me something that couldn't be used even if I had a Canadian HP PSC 1610 printer?
4) Can I return the cartridges to the supplier given that it is based in Canada, they delivered it to me in Canada and yet they sold me a product that says "for sale only in Latin America"?
Thanks
anenglishmaninsaintjohns

You will need to Contact HP to request a "Regionalization Reset". There should not be any charge for this, it is covered as part of the cartridge warranty. You will need to have access to your computer and printer while on the line with HP. You will also need to have a set of cartridges for the new region, once the reset is complete cartridges from the original region will no longer work. HP's web page on the subject is here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Why are there only 10 options under "Set Metadata Format"?

Why are there only 10 options under "Set Metadata Format"?
These are:
Caption
Title
Filename
Author
Copyright
Comments
Keywords
Date/Time
Aperture
Shutter Speed
Has anyone found a way to to change this?

Hi.
Can you find the "Comments" field into the Metadata? Because I don't find it and when I write something in the box Aperture tells me that the box is "unlink" from the metadata...
How can I add a (free) comment to my photos in a book?
Thank you very much for your reply
Bye

Why are individual emails occasionally disappearing as soon as I open them?

Every so often, I open an email on my Macbook Pro, read it, close it, and it disappears from the list of emails. It remains listed on my other devices. Does anyone know why this is happening under Lion? I've never seen this before.

FWIW, I've had similar issues with Lion and have finally just turned everything related to Spam off, so that all my emails go into my inboxes.
My guess was that there was some behind the scenes process deciding that some mail I wated to keep was spam on one of my comptuers, but not on another. Since all the the email accounts are IMAP, when i do delete an email from one comptuer, it gets deleted from all of them, but at least now I get to decide what gets deleted and what doesn't. More work for me, yes, but at least emails don't go missing anymore..
Mail in Lion is not problem free.

Print jobs disappearing with APEBS

I have a Windows Vista 64 bit machine with a AEBS gigabit running 7.2.1 firmware. Connected to the USB port on the AEBS is a Konica Minolta magicolor 2500w. This printer works fine connected directly to the computer but when connected to the AEBS the print jobs go into the spool and then disappear. BonJour (1.04 for 64 bit Vista) finds the printer fine and I am using the 64 bit Vista drivers from Konica but cannot get this to work.
Also I have a dell 924 that exhibits the same problem. I have tried manually adding the port with the same results. Anyone have any ideas?
Thanks.

I can find no reference that the HP P1006 uses PCL5e. Do you have a citation you can share that indicates this? I believe that you will find that this printer only uses the XQX stream protocol. For network printing you will need a driver such as the open source driver found at http://foo2xqx.rkkda.com/
Matt

Print job disappears almost immediately

This behavior started in LR2. Thinking back it may be related to OSX upgrade to Snow Leopard. After I hit print, the print job is sent to the printer and almost immediately “disappears” like nothing was sent. I have also gotten an error message of “/Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpll.app/Contents/MacOS/rasterto escpll failed”. This only occurs in Lightroom. My workaround is to take the image into Photoshop and print from there. This happens with both of my Epson printers and also with an HP LaserJet, so I think it is a LR problem and not an Epson problem. All drivers for all printers updated to latest available for Snow Leopard. The behavior continued with LR3. Fixed itself for awhile, then in the middle of printing a series of prints, started again. I cannot print from within LR at all. MacBook Pro 2.16 core 2 duo, OSX 10.6.4, LR3, Photoshop CS3.
Through google searches I found the “rastertoescpll failed” issues reported after Snow Leopard, but they were related to Epson printers, and not just LR related and fixed with driver updates. This has not worked for me.
I really like the LR print module and any help would be appreciated.

I realise this is well after your first message - but I am having the same problem now printing from my Mac OS X (Mountain Lion) through Photoshop to my Epson R1900. The print job appears then quickly disappears... Did you manage to solve this problem? I have uninstalled and reinstalled everything...

Print Job Disappears

Hi all. I'm having an issue with my work computer not printing. I send a print job to the printer and it simply disappears from the queue with no error message. I have updated all drivers, reset the printing system several times, and still no luck. The computer can recognize the printers (I've tried multiple), and seems to display their current status and print queue just fine.
Computer: intel iMac OS 10.8.1
Printers: Dell 2350dn laser printer, HP designjet 130nr, both setup and connected via IP.
Thanks in advance.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Click the Clear Display icon in the toolbar. Try the action that you're having trouble with again. Post any messages that appear in the Console window – the text, please, not a screenshot.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
PLEASE DO NOT INDISCRIMINATELY DUMP THOUSANDS OF LINES FROM THE LOG INTO A MESSAGE. If you do that, I will not respond.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

Printing jobs disappearing

Since upgraded to ML that all my print jobs sent when the printer is not physically connected (USB) get cancelled/deleted without a warning.
I used to work like this in previous versions of OSX as its very easy to go around with my macbook air and print whatever I need (invoices, cutomer orders, ...)
and when arriviving to the office I just need to connect the printer and all the jobs get printed.
It's annoying that this changed but what makes me angry is that there is no notification of this and I'm loosing some printings, even by using the pause printer when i'm away, because it's easy to forget to put in pause mode.
Is there anyway of change this to what used to be? Meaning I print and it stays in the printer queue until it sends to the printer!
Macbook Air 2011
OSX Mountain Lion
HP OfficeJet 6500A
Help apreciated
Regards
Jmm

I'm having a similar problem since upgrading my 2006 MacBook from Tiger to Snow Leopard last month. Formerly I could send to the print queue and documents would wait for days, through daily reboots, until I got around to connecting to my Brother MFC-7420.
After the upgrade, the documents disappear from the queue after a reboot or the accidental closing of the printer icon in the Dock.
Manually pausing the printer seems to work, as jmm315 suggested last summer, but this is not a user-friendly solution. Any other ideas would be appreciated, including how to nudge Apple to restore the "automatically pause after x minutes of searching for the printer" function. There once was a "Request a feature" link or button somewhere along the top right screen--I remember using it to suggest putting the day/date in the top right corner along with the time--but can't find it now.
(edited to add: just realized this is a Mountain Lion thread, but it's what came up when I searched for the problem)

Why Are Shipping Charges Not Shown Under SHIPPING on Pacing Slip

Why are the shipping charges included in total amount charged, but not under shipping on the Packing Slip?

Why are the shipping charges included in total amount charged, but not under shipping on the Packing Slip?

Why are my prints coming out blurry

i am trying to make 8x10 prints of my edited work and they are coming out pixelated...what is this image size feature? do i need to adjust the numbers to get a better quality print?

Is your monitor calibrated and profiled with a hardware device? If not, all bets are off - it's always going to be a bit hit and miss as to how prints look compared to any particular program. However, if you're not using colour management (with printer profiles) then here's one thing that may make Lightroom print more like Epson software. When you print in LR, in the "Print Job" settings (bottom right of print module), try setting (in Color Management) the profile to sRGB (probably sRGB IEC61966-2.1). First time, you'll probably have to choose "Other..." and find sRGB from a long list.
By default, LR sends images to the printer in ProPhoto colour space, and non-managed printer driver software often won't cope (resulting in dark desaturated prints). Force LR to send the image in sRGB and it's more likely to be about right.
Also see http://www.northlight-images.co.uk/article_pages/colour_management/prints_too_dark.html and http://www.northlight-images.co.uk/stuff/?p=1361

HT204135 my wifi printer keeps disappearing from Lion

I recently bought a wi-fi printer (Brother MFC - J430W), and I have two iMacs in the office running Mountain Lion. Both have all the OS updates done. In one of the iMacs the printer stops printing each time I restart the computer (the printer apears in the System Preferences Print & Scan); the printing dialog box displays the message "Cannot find printer in network"; each time I have to delete the printer from the printers list, restart the iMac and add it again.
In the other iMac this doesn't happen, and the printer was added the same way.
Can anyone help me with this? Thanks!

If you have been adding the printer using the Bonjour protocol then I would suggest to locate what IP address the printer is using and then add the printer using the HP JetDirect protocol.
Note that a Bonjour printer is added by opening Print & Scan and selecting the printer from the little pop-up window that appears after clicking the plus button or by using the Defaults view.
Once you know the IP address of the Brother, open Print & Scan and click the plus button to add. Select Add Printer or Scanner if the little pop up window appears. From the next window, select the IP tab and then enter the IP address of the Brother. Change the protocol to HP Jetdirect and change the name to Brother Test. Then in the Use menu, select the MFC-J430W driver. Add this and then see if you can print. If this works fine, then next time you restart the Mac, see if you can print using this Brother Test printer.

Why Are My EM Jobs Not Editable After They Execute?

hi experts,
I'm using 10g's Database Control tool to create some Export jobs - using the "Export to Export Files" wizard
When I create the job, it executes at the scheduled time. But then I cannot modify the schedule after that. When I attempt to edit the job, I get error
"Edit is not supported for *this job type*, only general information about the job can be updated No scheduled executions - this job can not be modified."
I want to be able to modify the schedule or change anything else I may need to change. What is different about this job type that makes it uneditable?
Sorry I'm new to Oracle jobs, still learning.
Thanks, John

3.6.0 Editing Finished Jobs
When attempting to edit a job, a user might see this error message: "No scheduled executions - this job cannot be modified". This means that based on the job's schedule, Enterprise Manager has determined that there are no future job executions scheduled for this job. Hence editing the parameters of the job does not make sense and thus will be prevented. However, the access page of the job can always be modified by the job owner, even after the job finishes, in order to share job output with others.
Please see more detailed documentation here:
http://www.coppertop.org.uk/doc/readmes/README_EM.htm#Jobs

Why are bonjour print jobs 'disappearing' under Lion?

Similar Messages

Maybe you are looking for