Why do I receive error -1073807339 VISA Write

I have a LV app built using LV2010 SP1 on a WinXP 32-bit machine. The app uses VISA to communicate serially through a RS232 to USB adpater to a pump. I can run the compiled app (exe) on another Win XP 32-bit machine without error. But the app generates "error -1073807339" with a VISA Write VI (timeout before completion) when run on Win7 64-bit machine. I have verified that both WinXP machines and the Win7 machine all have the NI device drivers installed (NI VISA 5.0.3), the LV2010 Run-Time engine, and the RS232-USB device drivers.
I have investigated sources of the timeout error and tried increasing the timeout with no success. I have also verified port settings, although the app is
identical between all machines.
I have verified that the installation on the Win7 64-bit machine was done using admin rights and files were installed correctly.
I feel like I must be missing something, so I'd appreciate some suggesitons.
Thanks
Dan

Can you communicate to the device on the Win 7 machine using hyperterminal or some some other communication program? Make sure that you have basic communication and it isn't some strange Win 7 thing. Are you runnign Win 7 64-bit? If so make sure you use the correct drivers.
Mark Yedinak
"Does anyone know where the love of God goes when the waves turn the minutes to hours?"
Wreck of the Edmund Fitzgerald - Gordon Lightfoot

Similar Messages

-1073807343 ERROR NI VISA write in

NI VISA driver was working fine until I installed a Tektronix driver .It threw the following error from then on
"1073807343 ERROR NI VISA write in"
So I uninstalled the NI VISA driver to install the new version with the bug fixes .
But I was not able to install the newer version NI VISA 14.0.1 as throws the following error
Unsupported version of NI-VISA detected
A version of NI-VISA that is not supported on this operating system has been detected. You must cancel this installation and uninstall the older version before continuing. Visit ni.com/info and enter the Info Code CleanVista for more information."
But I have uninstalled the older version already . How do I fix it ?

I'm wondering if the driver installed the Tektronix VISA. You should uninstall that before installing the latest version of NI VISA.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Why do I receive Error Code -50000?

I have a M-serie 6221 card where I use the two analog output, DC voltage out. (Labview 7.0 running on a Pentium 4 HT processor and Win XP SP2).
I have two processes (independant dynamic VI's) for analog voltage output.
Process 0 use AO channel 0 and Process 1 use AO channel 1 on the 6221 card.
Both processes use the simple DAQ-Write 1 Chl 1 Smpl VI and with an update rate of only 4 Hertz.
I have made shure that the data input is between +- 10V using a coerce function.
Occationaly (sometimes hours between fails) I receive Error Code -50000 (=conflicting parameters) after one of the DAQ-Write 1 Chl 1 Smpl VI .
Why?
Can it be a problem with multi-threading?
Regards
Bo Hellman
Biotage Sweden AB

bohellman,
When you are using the DAQmx Write VI, are you setting the auto start input to false, or have you left it at its default of true. One thing I would recommend trying is to explicity start the task and set auto start to false, and see if this makes any difference. If you are writing within a loop, then this can also make your application run more efficiently.
To determine if the problem was a multithreading issue, you could disable multithreading within LabVIEW (Tools-Options, select Performance and Disk tab).
If you still have trouble, could you post the problematic portion of your VI that is causing the error?
Good luck,
Jason

Why am i receiving error message "the ipod cannot be synced. an unknown error occurred (13019)" when i try to move a song from my itunes library into my music folder on my ipod touch?

Why am I receiving the following message when I try to move a song from my iTunes library into my iPod touch's music folder?
"The iPod cannot be synced. An unknown error occurred (13019)."
It was working just fine. Then all of a sudden this error message popped up.

Try here:
iTunes: Error 13019 during sync

Scanning problem. Receive error message: cannot write file. Code 10,242,7. Please help

I just purchased and installed a Canon MX 922 multi-function printer. I'm having a problem with the scanner in that the output after scanning cannot be displayed and is accompanied with an error message : Cannot write file. Code 10,242,7. This occurs when scanning documents and images. My operating system Windows XP (32). Can anyone please help me solve this problem? Thank you.

Hello. Please try the following adjustment to see if we can resolve this issue: 1. Open the IJ Scan Utility from your Desktop or the Canon Utilities listing of the Start Menu.2. Click Settings.3. On the left, choose the Auto Scan tab.4. Click the Defaults button on the lower right.5. Continue this process with each tab on the left.6. Click OK at the bottom of the Settings menu. Once this has been done, try scanning from the IJ Scan Utility to test the unit. If these troubleshooting steps do not work, feel free to call us at 1-800-OKCANON.

Why do i receive error -42110 when trying to watch rented movies

I've downloaded rented movies & have been charged by iTunes/Apple. However, receive error -42110 when attempt to watch rented movie.

Read this
Error 1004 and 1013: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to default on Windows. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.

Hi there , Why Do I Receive Error Code -1073807253 When Using VISA

Error Code -1073807253

Hi ahmed,
you can attach picture directly in the forum...
If you would use an error indicator you could read an explanation of the error. It's a "framing error", happening sometimes when using serial connections...
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Why do I receive Error -23088 when using the Eval Formula Node.vi (LV6.1)?

Hi,
I want to evaluate formulas like x=v>20; with that vi. When typing the
same formula into an normal Formula Node I get the correct answer. When
changing the formula into x=v+20; the eval Formula node.vi works fine.
But whenever I try to resolve a boolean function like that mentioned
above, I receive that f****n Error! Why this? What can I do? Is the Eval
... .vi less powerfull than the normal node?
Thanks for your help,
Daniel

Joel A wrote:
> I think the boolean (binary) ops are the only difference between the two nodes.  I pulled this from the help:
> Formula Node and Expression Node Functions
>
> The following list contains the names of the Formula Node and Expression Node functions, and their descriptions. Except for the binary functions, you also can use these functions with <a href="gmath.chm::/Parser_VIs.html" target="_blank">Formula VIs</a>. All function names must be lowercase. You also can use <a href="mk:@MSITStore:C:\Program%20Files\National%20Instruments\LabVIEW%208.0\help\lvhowto.chm::/Precedence_of_Operators_in.html" target="_blank">operators</a> and the pi constant in Formula and Expression Nodes.
> Start at the help above, and see if you can find any helpful information.
>  
>  
> J
Thanks for help,
I solved the problem by using the "Parse Arithmetic Expression.llb" from
examples. You can modify it and add the operators you need..

Why do I receive error on datasupp.cpp line 3563?

I am running a serial communication program and often the program crashes, when I restart Labview, I receive an error message referent to the datasupp.cpp line 3563

When LabVIEW generates a .cpp error, an internal error has occured within LabVIEW where a condition exists such that LabVIEW cannot continue execution. Generally, LabVIEW has reached a point in its internal code where it checks to see if certain conditions are true. Under normal circumstances, these conditions are indeed true, and LabVIEW is equipped to handle them. If they are not true, LabVIEW reports an internal error. LabVIEW reports the internal error and shuts down because to do otherwise would be to risk corrupting any VIs in memory.
Unfortunately, we do not have any record of the datasaupp.cpp line 3563 ever causing an error. When LabVIEW does throw internal .cpp errors, it will store a failure log file in your My Documents/LabVIEW Data/lvfailurelo
g directory by default. If you allow investigation of these internal errors, you can submit your error log file to National Instruments and we can see how the error message was generated.
You can check out http://www.ni.com/failure for more information.
Thanks again.

Why do I receive error code "-1074118644" when trying to initialize the 2532 Matrix?

I am using the VI "IviSwtch Initialize With Options.vi". I created a logical IVI name (MATRIX), and am passing the following option string: "Simulate=0,RangeCheck=1,QueryInstrStatus=0,Cache=1,DriverSetup=Topology:2532/1-Wire 4x128 Matrix". I tried variations of this with no luck. I configured the matrix in MAX with the same topology as shown above. My software versions are:
IVI Compliance package 2.1.2
LabVIEW 7.1
NI-SWITCH 2.30.49153
VISA 3.1
NI-DAQ 7.3

Thanks for the response Greg. I did finally get it working, but I had to use the "PXI1Slot8" format for the resource descriptor rather than "PXI2::9::INSTR". I don't know if that is typically what you are supposed to do, but that cleared the error.
To answer your questions, there's only one 2532 in the system. There is a 2566 in there as well. The configuration I was referring to was the IVI Driver configuration in MAX, not the DAQmx configuration, although I did select the TB-2640 under the DAQmx configuration, so it did default to the 1-Wire, 4x128 matrix as well.

Re: Scanning problem. Receive error message: cannot write file. Code 10,242,7. Please help

hi. my error message is very close to this except it says 10,243,7 cannot read file instead of write file. i tried all the fixes listed here in this forum as well as just about everything else everyone else on here has listed on the net and even called canon and tried all their fixes as well to no avail. any ideas?
[open window, place pc at edge gently tip and OOPS! crash! ]
is anyone else getting this error message and if so; how'd you get around it?
fixes tried:
uninstalling
reinstalling
[several times]
deleting all folders canon
ccleaner-both the sweep and registry options with backups of course.
sfc /scannow
chkdsk
thanks,
pf

Hi, pf!
So that the Community can help you better, we will need to know exactly which operating system is running on your computer. That, and any other details you'd like to give will help the Community better understand your issue!
If this is a time-sensitive matter, our US-based technical support team is standing by, ready to help 24/7 via Email at http://bit.ly/EmailCanon or by phone at 1-800-OK-CANON (1-800-652-2666) weekdays between 10 AM and 10 PM ET (7 AM to 7 PM PT).
Thanks and have a great day!

Why do I receive Error 200378 "Custom scale specified does not exist"?

I am trying to perform offset nulling using an NI-9237. I receive and error in regards to the custom scale even though I programmatically create the scale prior to the task. I am experiencing the erro whne using LV8.2.1 but with LV8.6 the problem disappears (same code, just open in LV8.6 and run)
The error is the following:
Error 200378 "Custom scale specified does not exist"
Possible reason(s):
Measurements: Custom scale specified does not exist. Custom Scale: test
Channel Name: LoadCell_StrainGage_Sim/ai0
Task Name: _unnamedTask<F>
I have attached the code in LV8.2.1
Thanks
Dan
Attachments:
test.vi ‏38 KB

Dan,
I tried your VI and it worked for me after I changed the channel from "LoadCell_StrainGage_Sim/ai0" to something that was on my system. Before that, I got the same error. So...are you sure that there is LoadCell_StrainGage_Sim/ai0 configured in MAX? Stupid question, I know, but it was the only thing I changed.
-Matt
-Matt Bradley
************ kudos always appreciated, but only when deserved **************************

Why do i receive error 56 ?

I am using SNMP toolkit by viodia..And I am getting an error code 56 while snmpgetrequest, which involves a UDP write and read? I am trying to get the manage UPS. And when i am trying to get data from the UPS i am getting this error?
What could be the reason?
Santosh Chavan
IIT MADRAS.

csantosh wrote:
I am using SNMP toolkit by
viodia..And I am getting an error code 56 while snmpgetrequest,
which involves a UDP write and read? I am trying to get the manage UPS.
And when i am trying to get data from the UPS i am getting this
error?
What could be the reason?
Read the
error description for error 56 and you will find it is a network
timeout error. You usually get this from TCP Open functions when no
target answers the connection request, or from both UDP and TCP read
when the addressed device did not respond. With UDP this usually means
that the UDP Write was not sent to the right device address or the
command contained a syntax error so that the device could not decode it
and decided to not send any response.
Another possibility is that you try to address a device that is
logically on a different subnet than the computer you are sending it
from. The computer will then send the packet to its default gateway and
that might be on a network adapter that has no physical connection with
the actual device. Check your network setup, for instance I had
recently a computer set to 192.168.0.1 with network mask 255.255.255.0
and tried to send an UDP packet to 192.168.10.200 and I never got a
resonse. After changing the device to have 192.168.0.200 everything
worked fine. Alternatively changing the network adapter network mask to
255.255.0.0 would have helped too.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Why do I receive Error -200077 Daqmx Read when scaling should be within range

I have an application using a NI-9215 and custom scales. The task and scales are all setup programmatically. I am receiving an error that the AI.Min value is out of range but when I check my scaling it seems like it should be fine. I have attached an image with the error message and also the scaling that I am using (slope and offset) for each channel. I have calculated the allowable min and max values for each of 3 channels based on the scaling and min/max range of the 9215 (+/-10V). For all of the channels I am trying to set the AI.Min = 0 and AI.Max = 13 but I receive the error message even though these values are within the calculated ranges. Is there something else I am missing?
Thanks
Dan
Solved!
Go to Solution.
Attachments:
Error -200077.png ‏188 KB

You should say how this was solved. That way other people can learn from your experience.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Why do I receive error messages when installing Adobe air installation packages?

I have Adobe Air Applications installed on my Dell XPS laptop but when i try and add new applications I get an error messaage that the installation file is corrupt.
I am not convinced that this is the case, it is happening too often. I think that Adobe Air is the problem but Adobe seem oblivious and not offering any support.

Thanks. I tried it and got the same error message. To me it's obvious that Adobe upgrades and programs have serious bugs in their install programs. I find this incredible from a company that creates such sophisticated programs and they cannot create install programs that actually work!!

Why do I receive error -1073807339 VISA Write

Similar Messages

Maybe you are looking for