Why ipv6
Why, when my MacBookPro6,2 sleeps, I loose my internet connection after awaking? When I look at my Network Preferences, I see Status : Connected, and instead of seeing my iPV4 10.15.0.xxx address, I see an iPV6 address. This results in NO internet connection. Sometimes if I cycle Wi-Fi Off, then ON again it recovers and shows the iPV4 address. Most times after sleep Network Preferences Status : Connected shows an iPV6 string, and I cannot connect.
When I Restart, everyting is normal - with an iPV4 10.15.0.xxx address shown. Go to sleep, randomly, I am in the same iPV6 predicament. Think we have a Lion bug - this has not happened prior to the update.
Mac user since 840AV. Anyone have a decent suggestion? Router = WRT610N, Comcast Cable internet. 5 machines on the network. Only the Lion Macbook Pro (Mid 2010, 2.66 GHz Intel Core i7) affected by this bug.
Bob
Configure IPv6 in Network preferencs to OFF.
Similar Messages
-
E4200 IPV6 support (and the removal of it)
Dear Linksys representatives,
Could you please provide some detail on why IPv6 was available in the first builds of the router but then got removed in later firmware versions and the official lecture is that IPv6 is not being supported at all.
I've had a nice little chat with one of your representatives and they could not clarify this at all. Actually, they say no Linksys devices EVER supported IPv6 period, which does not seem to be entirely true. Saw that 1.0.00 (build 13) for the e4200 actaully has IPv6 support in it and the current build has not.
Could you also make a sticky post about IPv6 support on all Linksys devices with wether they will be supporting it in the future or not? Depending on the outcome to this question I'm deciding to return my Linksys device or not, since I actually need to have IPv6 support for development of new soft- and hardware.
Kind regards,
Michel
ps: happy IPv6 day!
http://www.worldipv6day.org/The E4200v1 and E4200v2 both support IPv6 in the latest firmware. Do you still have a problem? See also: http://home.cisco.com/ipv6 for a list of routers and the test suites that they have past.
All future home routers are expected to have IPv6. -
Jumbo frame support with BGP MSS size
Hi All,
I am working at small SP. we are going to enable Jumbo Frame support from end to end. Our core segment have MPLS cloud and packet size could be able support up over 9000 already. Since our Core segment router are running pure BGP with our edge/access segment router , when I enable jumbo frame support on their interface level, I still can see BGP MSS size is 1260 right now. so my question, do I need increase BGP MSS size between our core router and edge router for transiting our SP cloud traffic packet ?
many thanks!
Erichi Harold,
I have other question about MSS size for IPv4 and IPv6 BGP session, if the physical link MTU size is 1500 ( same as 1514 on ASR 9K platform), why IPv6 BGP MSS is 1240 and IPv6 BGP MSS is 1220? As I only understand IPv4 headr 20, tcp header 20, but didn't match these MSS size number, I am sure I mis-understand some value in between, could you please let me know how we get 1240 and 1220?
many thanks!
Eric -
Why can't Safari 5.1 prefer ipv6 vs ipv4?
So prior to the installation of Lion, I had configured my network for ipv6 connectivity to the internet via Hurricane Electric Tunnel broker. Simply put, it was amazing. Now after the installation i've realized that my ipv6 support has slowed dramatically. When I tested to see exactly why this took place, i recieved the following:
It preferred ipv6 pre-lion, now its hot for ipv4, what gives? So I tested Dual Stack connectivity and i got this:
When i chose the ipV6 only test, I got this:
There's a not below the results that state: "If your browser is able to connect to the IPv6-only Test, yet using the Dual-Stack Test returns a page with a red box stating that you are using IPv4, then your browser and/or IP stack in your machine are preferring IPv4 over IPv6, which is undesired/broken behavior."
Since its obviously a Safari issue, Any idea how to correct this?http://docs.info.apple.com/article.html?path=AirPortUtility/5.1/en/ap2127.html
This may be a bit premature, as iPv6 has not been fully implemented yet:
What is IPv6?
http://support.apple.com/kb/HT4669?viewlocale=en_US
These articles may also be of interest:
http://en.wikipedia.org/wiki/Ipv6
The last five blocks of the IP Version 4 addresses have been handed over to the regional bodies that distribute them.
Those five blocks, called /8s and which contain 16 million addresses each, are expected to be completely depleted by September 2011.
The move to the new addressing scheme, IP version 6, is under way but could take years to complete.
"This is one of the most important days in the internet's history," said Rod Beckstrom, head of net overseer Icann at a press conference called to mark the handing over of the final five blocks.
"It is a point that the founders of the internet thought would occur far in the future," he said. "It gives us an opportunity to shift to an internet protocol that offers a pool so large that it is difficult even to imagine."
IPv6 has a pool of addresses a billion, trillion times larger than the 4.3 billion that IPv4 can support.
While that pool of 4.3 billion addresses was seen as plenty when the net was getting going, its recent growth has seen it get used up very quickly.
The shift to IPv6 was needed, he said, to support the continuing growth of the net and its greater use by all kinds of connected devices.
"The future of the internet and the innovation it fosters lies with IPv6," said Mr Beckstrom.
Despite the imminent exhaustion of the IPv4 pool, few ISPs, companies, academic organisations and others have made the switch. A World IPv6 Day is being planned for 8 June that will give governments, companies and others the chance to test out the technology.
Cisco, Verizon, Yahoo, Google, Facebook and many others have committed to testing IPv6 on 8 June.
In the UK, the switch to the new addressing scheme might take years, said Philip Sheldrake, head of 6UK, an organisation set up to advise companies how to make the move.
Most firms would upgrade equipment, routers, hubs and modems, as part of their "normal replenishment cycle", he said.
Equipment that is going to be in use for years before being replaced could be fitted with "dual stack" systems that can handle both IPv4 and IPv6 addresses
Some ISPs and others may take a more aggressive approach to the switch, said Mr Sheldrake.
"There are automated approaches that involve some remote updating of firmware in equipment," he said.
"The internet does not break when IPv4 is exhausted," said Mr Sheldrake explaining why this long term shift was feasible.
"What we are looking at here is that some parts of the world that have less IPv4 will be more on the front foot of adopting v6 than the UK because we have some good v4 space," he said.
http://www.bbc.co.uk/news/technology-12367484 -
Why do the connected devices to the router have the smae IPV6 address?
Hi,
Now I meet the issue
The operation steps on router (WRVS4400N):
1.Set the IP mode as Dual-stack IP and then save
2.Disable the IPV4 DHCP server
3.Use other deivces to connect the router.
The connected devices have the same IP address(2005:123:456:789::1),I am confused,why is it?
please help.
Thanks!Hello,
The WRVS4400N is in fact assigning IPv6 addresses to all the devices connected to it, but the WRVS4400N does not show a table with the IPv6 addresses assigned to each device connected, it only shows the IPv4 addresses and the respective MAC address for each device. The IPv6 of the WRVS4400N is an aggregetable global unicast IPv6 address (See the image below)
If you go to Setup > LAN you will see that you cannot modify the prefix of the IPv6 address, all you can modify is the postifx and prefix length field (As you can see in the image below).
For more information about these fields and general IPv6 configuration, please refer to the article IPv6 Configuration on WRVS4400N Wireless-N Gigabit Security Routers
The only way you have to see the IPv6 address assigned to each device connected to the WRVS4400N is to check on each device the IPv6 address assigned. The WRVS4400N does not provide this information. You can see from the below picture the IPv6 address assigned to my computer. As you can see, the WRVS4400N assign the the computer the prefix 2002:c0a8::/6. Then you can see the actual IPv6 address which is 2002:c0a8:0:b182:e6a:9b0e:cdcf.
As you can see, the initial part (The prefix) remains the same, since these are the first 64 bits of the whole IPv6 address. The other 64 bits of the IPv6 address represents the interface ID, that is, the device that is connected to the WRVS4400N.
I hope you find this information helpful. If you have further questions, don't hesitate to ask.
Alejandro Moncada
SBCD Engineer
[email protected] -
Why use link-local addressing for HSRP in IPv6?
I have scoured the internet for an answer to this question, and am no closer to having it answered. Am hoping someone here can help!
* Why do we use link-local (or autoconfig) addresses for the standby IP in FHRPs? If you are forwarding a packet towards a link-local destination address, wouldn't the source address then have to be a link-local address from the same prefix, which according to scope, should not route beyond the local link? How do you route an IP packet that has a link-local address for a source address?
Any insight would be much appreciated.
Thank you in advance.Dougles,
next hop is used for reaching "gateway" that know where to send packets farther (read it as "next hop to the destination")... routing in IPvX is hopping between nodes where every hop is closer to destination... This is theory behind.
So as machine that needs to send packet to "not directly connected destination" you only need to send packet to gateway leading to this destination...
so you need to send packet so, that "gateway" will recieve this packet and gateway then send this packet farther... it is not important what IP address this gateway has.
On ethernet you only need to know MAC address of this gateway and you send packet (with your source IPv6 address and intended destination IPv6 address) encapsulated with "destination MAC address" of gateway. When gateway recieve ethernet frame, and this frame is for it (destination MAC address is its MAC address), the gateway will proceed IP header (inside IP header the gateway see IT is not final destination for this packet, and gateway will route this packet).
So configuring IP address as next hop is just "hleper for simpler administration".. MAC address of gateway is important. In IPv4 address resolution protocol (ARP) is used to automaticly get MAC address of gateway if you configure next hop as IP address. In IPv6 there is neighbor discovery protocol(ND) used for this task.
conclusion: you can use link local address as nex hop address for addresses from any scope ... next hop is just next hop, it is not used just for the same scope communication.
And question is... if we need just information about MAC address of gateway, why to ask using global address?
We need to get MAC address... that is information important just "locally"... so to ask for local information, why not use link local address ?
HSRP is the same case... really just need MAC address to send packets correctly. -
Why doesn't Cisco add full IPv6 support to the firmware of the wrvs4400n small business router?
I own a Cisco wrvs4400n. I love this router but have been unhappy that it is not ipv6 ready. I have been disappointed that Cisco has not developed/introduced a new follow-on router, an advanced version of this router adding AC wireless support and speeds, more wireless signal strength, true dual band as well as the full ipv6 for the web additional to the intranet (as they have finally added in the latest firmware update) - to name a few. What they are offering presently is embarrassingly weak. They seem to be ceding the small business arena but no one else seems to be bringing out a good product for this market either. If they would at least provide support for IPv6 on the web, I could wait until they finally wake up and develop a good follow-on wired/wireless gigabit router.
Linksys, which they sold off for whatever reason, has been developing some impressive routers by hardware measures, but their firmware does not offer access to it to control and configure it that I would expect in a SBR, like they began in the wrvs4400n. Either I need Cisco to add that ipv6 so I can at least utilise the incipient roll-out of IPv6 from my ISP for time being or finally bring out an exciting new follow-on router with all the controls of that new architecture extending what they offered in the 4400!
If anyone has information/knowledge about either of these two options, developing another firmware update with full ipv6 or developing and introducing a follow-on router, please inform me about it. I am a 1 to 6 person operation and want to move into the present, at minimum, or, preferably, future. Thank you any one who can enlighten me about this.Voskuil67 wrote:
I have twice requested (paid) tech support for getting BB Desktop Software for Mac to work
Sorry, I don't think I understand. You have initiated a "paid" per-incident support ticket with RIM, and paid for these services, and you are not getting a call back?
When you paid for this, you should have been issued a case number or support incident file number. If you have that, you should contact RIM immediately for resolution. If you need a phone number, try 1-877-255-2377
If the above is not your situation, could you please explain further?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
E4200 ipv6 strange why is it grayed out?
I flashed the firmware and the ipv6 automatic is on disabled and I cannot set it to enabled.
the 6rd tunnel option I can chenge but that has not effect- in fact from what I looked up it seems to be something used by some cable providers.
hate to have to reset the router to factory defaults and then reset the network up - just to see if i can get the option to set IPV6 auto to enabled
any ideas?You can only enable IPv6 if your internet connection supports IPv6 either directly or via tunnel.
-
Why is my WRT610 sending IPv6 router advertisements?
Set up my new WRT610N over the weekend. Generally working ok, but I'm having trouble with my IPv6 tunnel setup. Started seeing a new prefix show up on my inside boxes, one that is in the IPv6 6to4 range, and appropriate for my external IP address. Do a little digging with a packet sniffer, and it looks like the 610N is sending out Router Advertisements every 10 seconds or so advertising the 6to4 IPv6 prefix and itself as a IPv6 router. Anyone else see this? Is there a way to turn it off?
OK, Bonus points to Linksys for having some v6 support, but it'd be nice if there were some knobs to adjust it or turn it off.
System is running firmware 1.00.00 B18. Here's the text of the packet capture:
Ethernet II, Src: Cisco-Li_62:99:40 (00:22:6b:62:99:40), Dst: IPv6mcast_00:00:00
:01 (33:33:00:00:00:01)
Destination: IPv6mcast_00:00:00:01 (33:33:00:00:00:01)
Address: IPv6mcast_00:00:00:01 (33:33:00:00:00:01)
.... ...1 .... .... .... .... = IG bit: Group address (multicast/broadcast)
.... ..1. .... .... .... .... = LG bit: Locally administered address (this is NOT the factory default)
Source: Cisco-Li_62:99:40 (00:22:6b:62:99:40)
Address: Cisco-Li_62:99:40 (00:22:6b:62:99:40)
.... ...0 .... .... .... .... = IG bit: Individual address (unicast)
.... ..0. .... .... .... .... = LG bit: Globally unique address (factory default)
Type: IPv6 (0x86dd)
Internet Protocol Version 6
0110 .... = Version: 6
[0110 .... = This field makes the filter "ip.version == 6" possible: 6]
.... 0000 0000 .... .... .... .... .... = Traffic class: 0x00000000
.... .... .... 0000 0000 0000 0000 0000 = Flowlabel: 0x00000000
Payload length: 56
Next header: ICMPv6 (0x3a)
Hop limit: 255
Source: fe80::222:6bff:fe62:9940 (fe80::222:6bff:fe62:9940)
Destination: ff02::1 (ff02::1)
Internet Control Message Protocol v6
Type: 134 (Router advertisement)
Code: 0
Checksum: 0x8226 [correct]
Cur hop limit: 64
Flags: 0x58
0... .... = Not managed
.1.. .... = Other
..0. .... = Not Home Agent
...1 1... = Router preference: Low
Router lifetime: 1800
Reachable time: 0
Retrans timer: 0
ICMPv6 Option (Prefix information)
Type: Prefix information (3)
Length: 32
Prefix length: 64
Flags: 0xc0
1... .... = Onlink
.1.. .... = Auto
..0. .... = Not router address
...0 .... = Not site prefix
Valid lifetime: 30
Preferred lifetime: 20
Prefix: 2002:62eb:e012::
ICMPv6 Option (Source link-layer address)
Type: Source link-layer address (1)
Length: 8
Link-layer address: 00:22:6b:62:99:40I'm seeing the issue on multiple computers and operating systems, all connected to the router. My systems are reacting appropriately to a IPv6 router advertisement by adding an IP address to their ethernet interfaces with the advertised prefix, unfortunately, it's one that doesn't work to reach normal IPv6 addresses.
On my unix based systems (linux, Mac OS X), I've been able to work around the issue by putting in a filter blocking icmp6 from the IPv6 link layer address of the linksys router, but I don't have that option on all my systems. -
Why is firefox for android so slow over ipv6?
firefox for anddroid is much slower than dolphin and chrome over ipv6.
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
The Firefox cache temporarily stores images, scripts, and other parts of websites while you are browsing. <br>
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies, do the following:
#Tap the menu icon located at the top right corner. This is the icon with 3 bars. On older Android devices you'll have to press the hardware menu key and then tap More.
#Tap '''Settings'''.
#After that, you will be taken to the settings screen. In the settings screen, look under the section '''''Privacy & Security''''' and select '''Clear private data'''.
#You will then be taken to a list of what can be cleared. Select the following 2 for deletion:
#*Cookies & active logins
#*Cache
#After those have been selected, tap the '''Clear data''' button to actually clear the cache and cookies.
Did this help you with your problems? Please let us know! -
Can someone help me figure out why system crashed?
I've got a desktop G5 running OS 10.3.9. Today I came home (9pm) and noticed that the fans were on full-blast, and my displays were dark (no "kernel panic" gray square). I rebooted and one of the monitors had a picture that was all crazy - I had to unplug it from the computer's 2nd video card and plug it back in. Then everything was ok. There was a brief (~1 minute) power outage today at 3pm, but I have everything on a UPS and it is set to shut down gracefully when the power is out for more than a few minutes. I'm trying to figure out what happened; according to the System log, it was still up at 6:24pm so maybe the power outage had nothing to do with it (although there were some weird UDP denies from the firewall, apparently coming from my laptop which is also on the home wireless network - very odd). Below are the two logs; can someone tell me why it crashed??
Panic log:
Wed Dec 5 21:01:31 2007
Unresolved kernel trap(cpu 0): 0x700 - Program DAR=0x0000000012BA9000 PC=0x0000000002020200
Latest crash info for cpu 0:
Exception state (sv=0x326A9000)
PC=0x02020200; MSR=0x00089030; DAR=0x12BA9000; DSISR=0x42000000; LR=0x00252648; R1=0x1C393C50; XCP=0x0000001C (0x700 - Program)
Backtrace:
0x002211E8 0x0059CB20 0x0059BEB0 0x005A0044 0x005A04F4 0x0059D538 0x00035148 0x00035028
Kernel loadable modules in backtrace (with dependencies):
com.apple.driver.AppleUSBHub(2.1.5)@0x599000
dependency: com.apple.iokit.IOUSBFamily(2.1.5)@0x4cb000
Proceeding back via exception chain:
Exception state (sv=0x326A9000)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x326A9280)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
Kernel version:
Darwin Kernel Version 7.9.0:
Wed Mar 30 20:11:17 PST 2005; root:xnu/xnu-517.12.7.obj~1/RELEASE_PPC
panic(cpu 0): 0x700 - Program
Latest stack backtrace for cpu 0:
Backtrace:
0x00083498 0x0008397C 0x0001EDA4 0x00090C38 0x0009402C
Proceeding back via exception chain:
Exception state (sv=0x326A9000)
PC=0x02020200; MSR=0x00089030; DAR=0x12BA9000; DSISR=0x42000000; LR=0x00252648; R1=0x1C393C50; XCP=0x0000001C (0x700 - Program)
Backtrace:
0x002211E8 0x0059CB20 0x0059BEB0 0x005A0044 0x005A04F4 0x0059D538 0x00035148 0x00035028
Kernel loadable modules in backtrace (with dependencies):
com.apple.driver.AppleUSBHub(2.1.5)@0x599000
dependency: com.apple.iokit.IOUSBFamily(2.1.5)@0x4cb000
Exception state (sv=0x326A9280)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
Kernel version:
Darwin Kernel Version 7.9.0:
Wed Mar 30 20:11:17 PST 2005; root:xnu/xnu-517.12.7.obj~1/RELEASE_PPC
System log:
Dec 5 03:15:02 Mike-Levins-Home-G5 syslogd: restart
Dec 5 03:15:36 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50820 255.255.255.255:2222 in via en0
Dec 5 03:16:36 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50821 255.255.255.255:2222 in via en0
Dec 5 03:17:36 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50822 255.255.255.255:2222 in via en0
Dec 5 03:18:36 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50825 255.255.255.255:2222 in via en0
Dec 5 03:19:36 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50826 255.255.255.255:2222 in via en0
Dec 5 03:20:36 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50827 255.255.255.255:2222 in via en0
Dec 5 03:21:36 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50828 255.255.255.255:2222 in via en0
Dec 5 03:22:36 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50830 255.255.255.255:2222 in via en0
Dec 5 03:23:36 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50831 255.255.255.255:2222 in via en0
Dec 5 03:24:36 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50832 255.255.255.255:2222 in via en0
Dec 5 03:25:36 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50833 255.255.255.255:2222 in via en0
Dec 5 03:26:36 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50834 255.255.255.255:2222 in via en0
Dec 5 03:27:36 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50835 255.255.255.255:2222 in via en0
Dec 5 03:28:36 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50838 255.255.255.255:2222 in via en0
Dec 5 03:29:36 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50839 255.255.255.255:2222 in via en0
Dec 5 03:30:36 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50840 255.255.255.255:2222 in via en0
Dec 5 03:31:36 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50841 255.255.255.255:2222 in via en0
Dec 5 03:32:36 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50842 255.255.255.255:2222 in via en0
Dec 5 03:33:36 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50843 255.255.255.255:2222 in via en0
Dec 5 03:34:36 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50844 255.255.255.255:2222 in via en0
Dec 5 03:35:36 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50845 255.255.255.255:2222 in via en0
Dec 5 03:36:36 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50846 255.255.255.255:2222 in via en0
Dec 5 03:37:36 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50847 255.255.255.255:2222 in via en0
Dec 5 03:38:36 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50850 255.255.255.255:2222 in via en0
Dec 5 03:39:36 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50851 255.255.255.255:2222 in via en0
Dec 5 03:40:36 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50852 255.255.255.255:2222 in via en0
Dec 5 03:41:36 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50853 255.255.255.255:2222 in via en0
Dec 5 03:42:36 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50854 255.255.255.255:2222 in via en0
Dec 5 03:43:36 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50855 255.255.255.255:2222 in via en0
Dec 5 03:44:36 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50856 255.255.255.255:2222 in via en0
Dec 5 03:45:36 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50857 255.255.255.255:2222 in via en0
Dec 5 03:46:36 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50858 255.255.255.255:2222 in via en0
Dec 5 03:47:36 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50859 255.255.255.255:2222 in via en0
Dec 5 03:48:36 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50862 255.255.255.255:2222 in via en0
Dec 5 03:49:36 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50863 255.255.255.255:2222 in via en0
Dec 5 03:50:36 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50864 255.255.255.255:2222 in via en0
Dec 5 03:51:36 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50865 255.255.255.255:2222 in via en0
Dec 5 03:52:36 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50866 255.255.255.255:2222 in via en0
Dec 5 03:53:36 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50867 255.255.255.255:2222 in via en0
Dec 5 03:54:36 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50868 255.255.255.255:2222 in via en0
Dec 5 03:55:36 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50869 255.255.255.255:2222 in via en0
Dec 5 03:56:36 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50870 255.255.255.255:2222 in via en0
Dec 5 03:57:36 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50871 255.255.255.255:2222 in via en0
Dec 5 03:58:36 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50874 255.255.255.255:2222 in via en0
Dec 5 03:58:59 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50875 239.255.255.253:427 in via en0
Dec 5 03:59:06 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50875 239.255.255.253:427 in via en0
Dec 5 03:59:36 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50876 255.255.255.255:2222 in via en0
Dec 5 04:00:36 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50877 255.255.255.255:2222 in via en0
Dec 5 04:01:36 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50878 255.255.255.255:2222 in via en0
Dec 5 04:02:36 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50879 255.255.255.255:2222 in via en0
Dec 5 04:03:36 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50880 255.255.255.255:2222 in via en0
Dec 5 04:04:36 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50881 255.255.255.255:2222 in via en0
Dec 5 04:05:36 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50882 255.255.255.255:2222 in via en0
Dec 5 04:06:36 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50883 255.255.255.255:2222 in via en0
Dec 5 04:07:36 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50884 255.255.255.255:2222 in via en0
Dec 5 04:08:36 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50887 255.255.255.255:2222 in via en0
Dec 5 04:09:36 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50888 255.255.255.255:2222 in via en0
Dec 5 04:10:36 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50889 255.255.255.255:2222 in via en0
Dec 5 04:11:36 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50890 255.255.255.255:2222 in via en0
Dec 5 04:12:37 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50891 255.255.255.255:2222 in via en0
Dec 5 04:13:37 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50892 255.255.255.255:2222 in via en0
Dec 5 04:14:37 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50893 255.255.255.255:2222 in via en0
Dec 5 04:15:37 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50894 255.255.255.255:2222 in via en0
Dec 5 04:16:37 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50895 255.255.255.255:2222 in via en0
Dec 5 04:17:37 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50896 255.255.255.255:2222 in via en0
Dec 5 04:18:37 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50899 255.255.255.255:2222 in via en0
Dec 5 04:19:37 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50900 255.255.255.255:2222 in via en0
Dec 5 04:20:37 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50901 255.255.255.255:2222 in via en0
Dec 5 04:21:37 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50902 255.255.255.255:2222 in via en0
Dec 5 04:22:37 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50904 255.255.255.255:2222 in via en0
Dec 5 04:23:37 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50905 255.255.255.255:2222 in via en0
Dec 5 04:24:37 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50906 255.255.255.255:2222 in via en0
Dec 5 04:25:37 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50907 255.255.255.255:2222 in via en0
Dec 5 04:26:37 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50908 255.255.255.255:2222 in via en0
Dec 5 04:27:37 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50909 255.255.255.255:2222 in via en0
Dec 5 04:28:37 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50912 255.255.255.255:2222 in via en0
Dec 5 04:29:37 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50913 255.255.255.255:2222 in via en0
Dec 5 04:30:37 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50914 255.255.255.255:2222 in via en0
Dec 5 04:31:37 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50915 255.255.255.255:2222 in via en0
Dec 5 04:32:37 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50916 255.255.255.255:2222 in via en0
Dec 5 04:33:37 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50917 255.255.255.255:2222 in via en0
Dec 5 04:34:37 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50918 255.255.255.255:2222 in via en0
Dec 5 04:35:37 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50919 255.255.255.255:2222 in via en0
Dec 5 04:36:38 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50920 255.255.255.255:2222 in via en0
Dec 5 04:37:38 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50921 255.255.255.255:2222 in via en0
Dec 5 04:38:38 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50924 255.255.255.255:2222 in via en0
Dec 5 04:39:38 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50925 255.255.255.255:2222 in via en0
Dec 5 04:40:38 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50926 255.255.255.255:2222 in via en0
Dec 5 04:41:38 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50927 255.255.255.255:2222 in via en0
Dec 5 04:42:38 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50928 255.255.255.255:2222 in via en0
Dec 5 04:43:38 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50929 255.255.255.255:2222 in via en0
Dec 5 04:44:38 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50930 255.255.255.255:2222 in via en0
Dec 5 04:45:38 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50931 255.255.255.255:2222 in via en0
Dec 5 04:46:38 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50932 255.255.255.255:2222 in via en0
Dec 5 04:47:38 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50933 255.255.255.255:2222 in via en0
Dec 5 04:48:38 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50936 255.255.255.255:2222 in via en0
Dec 5 04:49:38 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50937 255.255.255.255:2222 in via en0
Dec 5 04:50:38 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50938 255.255.255.255:2222 in via en0
Dec 5 04:51:38 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50939 255.255.255.255:2222 in via en0
Dec 5 04:52:38 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50940 255.255.255.255:2222 in via en0
Dec 5 04:53:38 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50941 255.255.255.255:2222 in via en0
Dec 5 04:54:38 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50942 255.255.255.255:2222 in via en0
Dec 5 04:55:38 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50943 255.255.255.255:2222 in via en0
Dec 5 04:56:38 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50944 255.255.255.255:2222 in via en0
Dec 5 04:57:38 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50945 255.255.255.255:2222 in via en0
Dec 5 04:58:38 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50948 255.255.255.255:2222 in via en0
Dec 5 04:59:00 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50949 239.255.255.253:427 in via en0
Dec 5 04:59:07 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50949 239.255.255.253:427 in via en0
Dec 5 04:59:38 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50950 255.255.255.255:2222 in via en0
Dec 5 05:00:38 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50951 255.255.255.255:2222 in via en0
Dec 5 05:01:38 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50952 255.255.255.255:2222 in via en0
Dec 5 05:02:38 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50953 255.255.255.255:2222 in via en0
Dec 5 05:03:38 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50954 255.255.255.255:2222 in via en0
Dec 5 05:04:38 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50955 255.255.255.255:2222 in via en0
Dec 5 05:05:38 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50956 255.255.255.255:2222 in via en0
Dec 5 05:06:38 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50957 255.255.255.255:2222 in via en0
Dec 5 05:07:38 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50958 255.255.255.255:2222 in via en0
Dec 5 05:08:38 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50961 255.255.255.255:2222 in via en0
Dec 5 05:09:38 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50962 255.255.255.255:2222 in via en0
Dec 5 05:10:38 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50963 255.255.255.255:2222 in via en0
Dec 5 05:11:38 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50964 255.255.255.255:2222 in via en0
Dec 5 05:12:38 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50965 255.255.255.255:2222 in via en0
Dec 5 05:13:38 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50966 255.255.255.255:2222 in via en0
Dec 5 05:14:38 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50967 255.255.255.255:2222 in via en0
Dec 5 05:15:38 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50968 255.255.255.255:2222 in via en0
Dec 5 05:16:38 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50969 255.255.255.255:2222 in via en0
Dec 5 05:17:38 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50970 255.255.255.255:2222 in via en0
Dec 5 05:18:38 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50973 255.255.255.255:2222 in via en0
Dec 5 05:19:38 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50974 255.255.255.255:2222 in via en0
Dec 5 05:20:38 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50975 255.255.255.255:2222 in via en0
Dec 5 05:21:38 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50976 255.255.255.255:2222 in via en0
Dec 5 05:22:38 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50978 255.255.255.255:2222 in via en0
Dec 5 05:23:38 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50979 255.255.255.255:2222 in via en0
Dec 5 05:24:38 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50980 255.255.255.255:2222 in via en0
Dec 5 05:25:38 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50981 255.255.255.255:2222 in via en0
Dec 5 05:26:38 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50982 255.255.255.255:2222 in via en0
Dec 5 05:27:38 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50983 255.255.255.255:2222 in via en0
Dec 5 05:28:38 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50986 255.255.255.255:2222 in via en0
Dec 5 05:29:38 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50987 255.255.255.255:2222 in via en0
Dec 5 05:30:38 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50988 255.255.255.255:2222 in via en0
Dec 5 05:31:38 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50989 255.255.255.255:2222 in via en0
Dec 5 05:32:38 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50990 255.255.255.255:2222 in via en0
Dec 5 05:33:38 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50991 255.255.255.255:2222 in via en0
Dec 5 05:34:38 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50992 255.255.255.255:2222 in via en0
Dec 5 05:35:38 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50993 255.255.255.255:2222 in via en0
Dec 5 05:36:38 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50994 255.255.255.255:2222 in via en0
Dec 5 05:37:38 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50995 255.255.255.255:2222 in via en0
Dec 5 05:38:38 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50998 255.255.255.255:2222 in via en0
Dec 5 05:39:38 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:50999 255.255.255.255:2222 in via en0
Dec 5 05:40:38 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:51000 255.255.255.255:2222 in via en0
Dec 5 05:41:38 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:51001 255.255.255.255:2222 in via en0
Dec 5 05:42:38 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:51002 255.255.255.255:2222 in via en0
Dec 5 05:43:39 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:51003 255.255.255.255:2222 in via en0
Dec 5 05:44:39 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:51004 255.255.255.255:2222 in via en0
Dec 5 05:45:39 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:51005 255.255.255.255:2222 in via en0
Dec 5 05:46:39 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:51006 255.255.255.255:2222 in via en0
Dec 5 05:47:39 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:51007 255.255.255.255:2222 in via en0
Dec 5 05:48:39 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:51010 255.255.255.255:2222 in via en0
Dec 5 05:49:39 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:51011 255.255.255.255:2222 in via en0
Dec 5 05:50:39 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:51012 255.255.255.255:2222 in via en0
Dec 5 05:51:39 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:51013 255.255.255.255:2222 in via en0
Dec 5 05:52:39 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:51014 255.255.255.255:2222 in via en0
Dec 5 05:53:39 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:51015 255.255.255.255:2222 in via en0
Dec 5 05:54:39 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:51016 255.255.255.255:2222 in via en0
Dec 5 05:55:39 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:51017 255.255.255.255:2222 in via en0
Dec 5 05:56:39 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:51018 255.255.255.255:2222 in via en0
Dec 5 05:57:39 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:51019 255.255.255.255:2222 in via en0
Dec 5 05:58:39 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:51022 255.255.255.255:2222 in via en0
Dec 5 05:59:01 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:51023 239.255.255.253:427 in via en0
Dec 5 05:59:08 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:51023 239.255.255.253:427 in via en0
Dec 5 05:59:39 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:51024 255.255.255.255:2222 in via en0
Dec 5 06:00:39 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:51025 255.255.255.255:2222 in via en0
Dec 5 06:01:39 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:51026 255.255.255.255:2222 in via en0
Dec 5 06:02:39 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:51027 255.255.255.255:2222 in via en0
Dec 5 06:03:39 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:51028 255.255.255.255:2222 in via en0
Dec 5 06:04:39 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:51029 255.255.255.255:2222 in via en0
Dec 5 06:05:39 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:51030 255.255.255.255:2222 in via en0
Dec 5 06:06:40 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:51031 255.255.255.255:2222 in via en0
Dec 5 06:07:40 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:51032 255.255.255.255:2222 in via en0
Dec 5 06:08:40 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:51035 255.255.255.255:2222 in via en0
Dec 5 06:09:40 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:51036 255.255.255.255:2222 in via en0
Dec 5 06:10:40 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:51037 255.255.255.255:2222 in via en0
Dec 5 06:11:40 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:51038 255.255.255.255:2222 in via en0
Dec 5 06:12:40 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:51039 255.255.255.255:2222 in via en0
Dec 5 06:13:40 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:51040 255.255.255.255:2222 in via en0
Dec 5 06:14:40 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:51041 255.255.255.255:2222 in via en0
Dec 5 06:15:40 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:51042 255.255.255.255:2222 in via en0
Dec 5 06:16:40 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:51043 255.255.255.255:2222 in via en0
Dec 5 06:17:40 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:51044 255.255.255.255:2222 in via en0
Dec 5 06:18:40 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:51047 255.255.255.255:2222 in via en0
Dec 5 06:19:40 Mike-Levins-Home-G5 kernel: ipfw: 56017 Deny UDP 192.168.1.103:51048 255.255.255.255:2222 in via en0
Dec 5 06:24:19 Mike-Levins-Home-G5 mDNSResponder[199]: mDNSResponder Sleeping at 99736988
Dec 5 21:01:10 localhost syslogd: restart
Dec 5 21:01:10 localhost syslogd: kernel boot file is /mach_kernel
Dec 5 21:01:10 localhost kernel: standard timeslicing quantum is 10000 us
Dec 5 21:01:10 localhost kernel: vmpagebootstrap: 505021 free pages
Dec 5 21:01:10 localhost kernel: migtable_maxdispl = 68
Dec 5 21:01:10 localhost kernel: IOKit Component Version 7.9:
Dec 5 21:01:10 localhost kernel: Wed Mar 30 20:07:52 PST 2005; root(rcbuilder):RELEASE_PPC/iokit/RELEASE
Dec 5 21:01:10 localhost kernel: 112 prelinked modules
Dec 5 21:01:10 localhost kernel: MacRISC4CPU::start - found 'cy28508'
Dec 5 21:01:10 localhost kernel: Copyright (c) 1982, 1986, 1989, 1991, 1993
Dec 5 21:01:10 localhost kernel: The Regents of the University of California. All rights reserved.
Dec 5 21:01:10 localhost kernel:
Dec 5 21:01:10 localhost kernel: using 5242 buffer headers and 4096 cluster IO buffer headers
Dec 5 21:01:10 localhost kernel: DART enabled
Dec 5 21:01:10 localhost kernel: MacRISC4CPU: publishing BootCPU
Dec 5 21:01:10 localhost kernel: Local FireWire GUID = 0xa95ff:0xfec92b72
Dec 5 21:01:10 localhost kernel: CSRHIDTransitionDriver::probe
Dec 5 21:01:10 localhost kernel: CSRHIDTransitionDriver::start before command
Dec 5 21:01:10 localhost kernel: CSRHIDTransitionDriver::start kIOUSBPipeStalled = e000404f
Dec 5 21:01:10 localhost kernel: Security auditing service present
Dec 5 21:01:10 localhost kernel: BSM auditing present
Dec 5 21:01:10 localhost kernel: From path: "/ht/pci@7/k2-sata-root/k2-sata@1/@0:2,\mach_kernel", Waiting on <dict ID="0"><key>IOPathMatch</key><string ID="1">IODeviceTree:/ht/pci@7/k2-sata-root/k2-sata@1/@0:2</string></dict>
Dec 5 21:01:10 localhost kernel: Got boot device = IOService:/MacRISC4PE/ht@0,f2000000/AppleMacRiscHT/pci@7/IOPCI2PCIBridge/k2-sat a-root@C/AppleK2SATARoot/k2-sata@1/AppleK2SATA/ATADeviceNub@0/IOATABlockStorageD river/IOATABlockStorageDevice/IOBlockStorageDriver/Maxtor 6Y250M0 Media/IOApplePartitionScheme/Untitled HD@2
Dec 5 21:01:10 localhost kernel: BSD root: disk1s2, major 14, minor 5
Dec 5 21:01:10 localhost kernel: jnl: replay_journal: from: 21045760 to: 10490368 (joffset 0x59a8dc000)
Dec 5 21:01:10 localhost kernel: CSRHIDTransitionDriver::start after command - e00002ed
Dec 5 21:01:10 localhost last message repeated 5 times
Dec 5 21:01:11 localhost kernel: Jettisoning kernel linker.
Dec 5 21:01:11 localhost kernel: Resetting IOCatalogue.
Dec 5 21:01:11 localhost kextd[87]: registering service "com.apple.KernelExtensionServer"
Dec 5 21:01:13 localhost kernel: Matching service count = 0
Dec 5 21:01:14 localhost kernel: [HCIController][start]
Dec 5 21:01:14 localhost kernel: AppleRS232Serial: 0 0 AppleRS232Serial::start - returning false early, Connector or machine incorrect
Dec 5 21:01:14 localhost kernel: PocketMackSerial - Version 1.0b10
Dec 5 21:01:14 localhost kernel: [AppleUSBHCIController][StopIsochPipeRead] - mInt1IsochInPipe = 0 - numReadsPending = 0
Dec 5 21:01:14 localhost kernel: [HCIController][configurePM] ignore = 1
Dec 5 21:01:14 localhost kernel: [HCIController][setPowerState] 1 (ignore=1)
Dec 5 21:01:14 localhost kernel: [HCIController][configurePM] changePowerStateTo(0)
Dec 5 21:01:14 localhost kernel: [HCIController][setPowerState] 0 (ignore=1)
Dec 5 21:01:14 localhost kernel: [HCIController][configurePM] ignore = 0
Dec 5 21:01:14 localhost kernel: [CSRHCIController][start] 1
Dec 5 21:01:14 localhost kernel: IOPlatformControl::registerDriver Control Driver AppleSlewClock did not supply target-value, using default
Dec 5 21:01:20 localhost kernel: UniNEnet: Ethernet address 00:0a:95:c9:2b:72
Dec 5 21:01:20 localhost kernel: IOFireWireIP: FireWire address 00:0a:95:ff:fe:c9:2b:72
Dec 5 21:01:20 localhost SystemStarter: Welcome to Macintosh.
Dec 5 21:01:20 localhost mach_init[2]: Server 0 in bootstrap d03 uid 0: "/usr/libexec/fix_prebinding": exited with non-zero status 1 [pid 140]
Dec 5 21:01:20 localhost lookupd[125]: lookupd (version 324.13) starting - Wed Dec 5 21:01:20 2007
Dec 5 21:01:20 localhost ConsoleMessage: Loading Little Snitch
Dec 5 21:01:20 localhost ConsoleMessage: Starting SecurityServer
Dec 5 21:01:20 localhost ConsoleMessage: Starting kernel event agent
Dec 5 21:01:20 localhost ConsoleMessage: Starting Virtual PC OS Services
Dec 5 21:01:20 localhost ConsoleMessage: Starting timed execution services
Dec 5 21:01:20 localhost ConsoleMessage: Starting Apple Multicast DNS Responder
Dec 5 21:01:20 localhost ConsoleMessage: Starting Retrospect Client
Dec 5 21:01:20 localhost kernel: jnl: replay_journal: from: 22191104 to: 13698048 (joffset 0x751000)
Dec 5 21:01:20 localhost diskarbitrationd[90]: disk2s3 hfs 9111674C-F746-30DD-A896-5998E9D94D9C Home OSX new laptop backup [not mounted]
Dec 5 21:01:20 localhost diskarbitrationd[90]: disk2s5 hfs 5A7E3C45-324A-3140-86CD-429AAE42419C home OS9 old laptop backup [not mounted]
Dec 5 21:01:20 localhost diskarbitrationd[90]: disk2s7 hfs 1B400D23-9AC3-3464-9E0F-52DD319D6E3E Work OSX disk backup [not mounted]
Dec 5 21:01:20 localhost diskarbitrationd[90]: disk2s9 hfs EDFE1BCE-1BC9-3701-AE9E-1E9EBACADAAB Work OS9 disk backup [not mounted]
Dec 5 21:01:21 localhost diskarbitrationd[90]: disk1s2 hfs 10B30D38-41F1-3CB2-AB66-5B8D9A65B7A0 Main internal drive /
Dec 5 21:01:22 localhost SystemStarter: Loading Little Snitch
Dec 5 21:01:22 localhost SystemStarter: Starting SecurityServer
Dec 5 21:01:22 localhost SystemStarter: Starting kernel event agent
Dec 5 21:01:22 localhost SystemStarter: Starting Virtual PC OS Services
Dec 5 21:01:22 localhost SystemStarter: Starting timed execution services
Dec 5 21:01:22 localhost SystemStarter: Starting Apple Multicast DNS Responder
Dec 5 21:01:22 localhost mDNSResponder[199]: mDNSResponder-58.8.1 (Jan 31 2005 21:11:41) starting
Dec 5 21:01:22 localhost ConsoleMessage: Initializing network
Dec 5 21:01:22 localhost ConsoleMessage: Checking disks
Dec 5 21:01:22 localhost mDNSResponder[199]: SetupAddr invalid sa_family 0
Dec 5 21:01:22 localhost SystemStarter: Initializing network
Dec 5 21:01:22 localhost SystemStarter: Checking disks
Dec 5 21:01:26 localhost kernel: ATY,Simone_A: vram [c0000000:04000000]
Dec 5 21:01:26 localhost kernel: ATY,Simone_B: vram [c0000000:04000000]
Dec 5 21:01:27 localhost kernel: [HCIController][RequestPowerStateChange] 0->1
Dec 5 21:01:27 localhost kernel: [HCIController][RequestPowerStateChange] sleep is available
Dec 5 21:01:27 localhost kernel: [HCIController][RequestPowerStateChange] sleep is not enabled
Dec 5 21:01:27 localhost kernel: [HCIController][RequestPowerStateChange] Calling changePowerStateTo(1)
Dec 5 21:01:27 localhost kernel: [HCIController][setPowerState] 1 (ignore=0)
Dec 5 21:01:27 localhost kernel: [HCIController][setPowerStateWL] 1
Dec 5 21:01:27 localhost kernel: [HCIController][RequestPowerStateChange] changePowerStateTo() returned 0x0
Dec 5 21:01:27 localhost kernel: [HCIController][RequestPowerStateChange] changePowerStateTo(1) returned 0x0
Dec 5 21:01:27 localhost kernel: [HCIController][PerformPowerStateChange] 0->1
Dec 5 21:01:27 localhost kernel: [HCIController][CompletePowerStateChange]
Dec 5 21:01:27 localhost kernel: [HCIController][setupHardware] AFH Is Supported
Dec 5 21:01:28 localhost kernel: UniNEnet::monitorLinkStatus - Link is up at 100 Mbps - Full Duplex
Dec 5 21:01:28 localhost configd[89]: executing /System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/set-hostna me
Dec 5 21:01:28 localhost set-hostname[217]: setting hostname to Mike-Levins-Home-G5.local
Dec 5 21:01:30 localhost kernel: ATY,Bugsy_A: vram [a8000000:08000000]
Dec 5 21:01:30 localhost kernel: ATY,Bugsy_B: vram [a0000000:08000000]
Dec 5 21:01:30 localhost SystemStarter: The "HasShadow" window property is obsolete. Use CGSSetWindowShadowAndRimParameters(cid, wid, 0.0,0.0, 0,0, CGSNoShadowStyle) to turn off the window shadow instead. Set a break-point on CGSLogMessage to find out where this property is set.
Dec 5 21:01:31 localhost configd[89]: posting notification com.apple.system.config.network_change
Dec 5 21:01:31 localhost configd[89]: executing /System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/enable-net work
Dec 5 21:01:31 localhost configd[89]: executing /System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/set-hostna me
Dec 5 21:01:31 localhost mach_init[2]: Server 0 in bootstrap d03 uid 0: "/usr/sbin/lookupd": exited as a result of signal 1 [pid 125]
Dec 5 21:01:31 localhost lookupd[228]: lookupd (version 324.13) starting - Wed Dec 5 21:01:31 2007
Dec 5 21:01:31 localhost ConsoleMessage: Loading Shared IP extension
Dec 5 21:01:31 localhost ConsoleMessage: Starting network time synchronization
Dec 5 21:01:31 localhost /usr/libexec/panicdump: Error (-1) setting variable - 'aapl,panic-info'
Dec 5 21:01:31 localhost ConsoleMessage: Starting DigiTunnel
Dec 5 21:01:31 localhost SystemStarter: crash reporter (258) did not complete successfully.
Dec 5 21:01:31 localhost ConsoleMessage: Starting printing services
Dec 5 21:01:31 localhost /Library/StartupItems/DigiTunnelStartup/DigiTunnel-Daemon: DIAG: DTD[268] uid=0, euid=0, parentID=267
Dec 5 21:01:31 localhost DigiTunnel-Daemon: DigiTunnel-Daemon running ...
Dec 5 21:01:31 localhost ntpdate[276]: ntpdate [email protected] Fri Sep 12 18:30:10 PDT 2003 (1)
Dec 5 21:01:31 localhost ConsoleMessage: Starting DynDNS Updater
Dec 5 21:01:31 localhost set-hostname[293]: setting hostname to Mike-Levins-Home-G5.local
Dec 5 21:01:32 localhost ntpdate[276]: step time server 17.254.0.26 offset 0.592963 sec
Dec 5 21:01:32 localhost ntpd[296]: ntpd [email protected] Fri Sep 12 18:30:03 PDT 2003 (1)
Dec 5 21:01:32 localhost ntpd[296]: precision = 6 usec
Dec 5 21:01:32 localhost ConsoleMessage: Starting network file system
Dec 5 21:01:32 localhost automount[322]: automount version 57
Dec 5 21:01:32 localhost ConsoleMessage: Loading IP Firewall extension
Dec 5 21:01:32 localhost kernel: IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to accept, logging disabled
Dec 5 21:01:32 localhost kernel: IPv6 packet filtering initialized, default to accept, logging disabled
Dec 5 21:01:32 localhost kernel: IP firewall loaded
Dec 5 21:01:32 localhost automount[328]: automount version 57
Dec 5 21:01:32 localhost diskarbitrationd[90]: disk0s2 hfs 3B224C04-B0F5-3FF9-A020-455916C4A0A2 Internal Backup Disk /Volumes/Internal Backup Disk
Dec 5 21:01:32 localhost syslogd: /dev/console: Input/output error
Dec 5 21:01:32 localhost init: kernel security level changed from 0 to 1
Dec 5 21:01:33 localhost ConsoleMessage: Starting MATLAB License Manager
Dec 5 21:01:33 localhost ConsoleMessage: Starting mail services
Dec 5 21:01:33 localhost ConsoleMessage: Starting internet services
Dec 5 21:01:33 localhost xinetd[371]: xinetd Version 2.3.11 started with libwrap options compiled in.
Dec 5 21:01:33 localhost xinetd[371]: Started working: 1 available service
Dec 5 21:01:34 localhost automount[322]: logout notification received.
Dec 5 21:01:34 localhost automount[322]: requesting logout processing.
Dec 5 21:01:34 localhost automount[322]: handledeferredrequests: user logged out.
Dec 5 21:01:34 localhost automount[328]: logout notification received.
Dec 5 21:01:34 localhost automount[328]: requesting logout processing.
Dec 5 21:01:34 localhost automount[328]: handledeferredrequests: user logged out.
Dec 5 21:01:34 localhost loginwindow[340]: Sent launch request message to DirectoryService mach_init port
Dec 5 21:01:34 localhost DirectoryService[586]: Launched version 1.8.5 (v258.3)
Dec 5 21:01:36 localhost kernel: 0 0 AppleUSBCDCECMData: probe - provider doesn't want us to match
Dec 5 21:01:38 localhost kernel: 0 0 AppleUSBCDCWMCData: probe - provider doesn't want us to match
Dec 5 21:01:39 localhost kernel: 0 0 AppleUSBCDCACMData: probe - provider doesn't want us to match
Dec 5 21:01:40 localhost kernel: InternalUSBModem::setPowerState(1)
Dec 5 21:01:38 localhost SystemStarter: The following StartupItems failed to properly start:
Dec 5 21:01:38 localhost SystemStarter: /System/Library/StartupItems/CrashReporter
Dec 5 21:01:38 localhost SystemStarter: - execution of Startup script failed
Dec 5 21:01:38 localhost SystemStarter:
Dec 5 21:01:40 localhost loginwindow[340]: Error with bootstraplookup on server port after 10 tries: APIFramework/CClientEndPoint.cpp at: 247: Msg (1102) = unknown error code
Dec 5 21:01:41 localhost loginwindow[340]: Sent launch request message to DirectoryService mach_init port
aped[209]: Not affecting super-user process SecurityAgent[590]. This is just an informative message. It is not causing your problem.
Dec 5 21:01:42 localhost DigiTunnel-Daemon: mlevin has logged in. #sess=1
Dec 5 21:01:42 localhost kernel: [HCIController][RequestPowerStateChange] 1->0
Dec 5 21:01:42 localhost kernel: [HCIController][RequestPowerStateChange] sleep is available
Dec 5 21:01:42 localhost kernel: [HCIController][RequestPowerStateChange] sleep is not enabled
Dec 5 21:01:42 localhost kernel: [HCIController][RequestPowerStateChange] Calling changePowerStateTo(0)
Dec 5 21:01:42 localhost kernel: [HCIController][setPowerState] 0 (ignore=0)
Dec 5 21:01:42 localhost kernel: [HCIController][setPowerStateWL] 0
Dec 5 21:01:42 localhost kernel: [HCIController][PerformPowerStateChange] 1->0
Dec 5 21:01:42 localhost kernel: [AppleUSBHCIController][StopIsochPipeRead] - mInt1IsochInPipe = 0 - numReadsPending = 0
Dec 5 21:01:42 localhost kernel: [HCIController][CompletePowerStateChange]
Dec 5 21:01:42 localhost kernel: [HCIController][RequestPowerStateChange] changePowerStateTo() returned 0x0
Dec 5 21:01:42 localhost kernel: [HCIController][RequestPowerStateChange] changePowerStateTo(0) returned 0x0
Dec 5 21:01:50 localhost kernel: jnl: replay_journal: from: 158208 to: 347648 (joffset 0x11dac68000)
Dec 5 21:01:50 localhost diskarbitrationd[90]: disk2s3 hfs 9111674C-F746-30DD-A896-5998E9D94D9C Home OSX new laptop backup /Volumes/Home OSX new laptop backup
Dec 5 21:01:52 localhost kernel: jnl: replay_journal: from: 8379392 to: 713216 (joffset 0x3d3e94000)
Dec 5 21:01:52 localhost diskarbitrationd[90]: disk2s5 hfs 5A7E3C45-324A-3140-86CD-429AAE42419C home OS9 old laptop backup /Volumes/home OS9 old laptop backup
Dec 5 21:01:53 localhost kernel: jnl: replay_journal: from: 5042176 to: 5231616 (joffset 0x345c52000)
Dec 5 21:01:53 localhost diskarbitrationd[90]: disk2s7 hfs 1B400D23-9AC3-3464-9E0F-52DD319D6E3E Work OSX disk backup /Volumes/Work OSX disk backup
Dec 5 21:01:53 localhost kernel: jnl: replay_journal: from: 6347264 to: 6389248 (joffset 0xa14f74000)
Dec 5 21:01:53 localhost diskarbitrationd[90]: disk2s9 hfs EDFE1BCE-1BC9-3701-AE9E-1E9EBACADAAB Work OS9 disk backup /Volumes/Work OS9 disk backup
Dec 5 21:01:58 localhost kernel: ipfw: 56017 Deny UDP 192.168.1.103:51421 255.255.255.255:2222 in via en0
aped[209]: Not affecting super-user process Backup Toolkit ([635]. This is just an informative message. It is not causing your problem.
Dec 5 21:02:23 localhost /Applications/Utilities/DiskWarrior 4.0.app/Contents/MacOS/DiskWarriorDaemon: [Wed Dec 5 21:02:22 EST 2007] : ATA device 'Maxtor 6Y250M0', serial number 'Y62ACRYE', reports it is functioning at a temperature of 78.8F (26C) degrees.
Dec 5 21:02:23 localhost /Applications/Utilities/DiskWarrior 4.0.app/Contents/MacOS/DiskWarriorDaemon: [Wed Dec 5 21:02:22 EST 2007] : Spare blocks for ATA device 'Maxtor 6Y250M0', serial number 'Y62ACRYE', appear to still be available. (Total Available: 63) (Use Attempts: 0)
Dec 5 21:02:23 localhost /Applications/Utilities/DiskWarrior 4.0.app/Contents/MacOS/DiskWarriorDaemon: [Wed Dec 5 21:02:23 EST 2007] : ATA device 'Maxtor 6Y250M0', serial number 'Y62ACJ2E', reports it is functioning at a temperature of 73.4F (23C) degrees.
Dec 5 21:02:23 localhost /Applications/Utilities/DiskWarrior 4.0.app/Contents/MacOS/DiskWarriorDaemon: [Wed Dec 5 21:02:23 EST 2007] : Spare blocks for ATA device 'Maxtor 6Y250M0', serial number 'Y62ACJ2E', appear to still be available. (Total Available: 63) (Use Attempts: 39)
aped[209]: Not affecting super-user process TechToolProtecti[647]. This is just an informative message. It is not causing your problem.
Dec 5 21:02:35 localhost popper[664]: popper: Server: Can't bind local address 0.0.0.0:110: (13) Permission denied [main.c:521] [main.c:521]
Dec 5 21:02:43 localhost /Applications/Microsoft Office 2004/Office/Microsoft Database Daemon: LaunchApplication(/Applications/Microsoft Office 2004/Office/Microsoft Office Notifications)
Dec 5 21:02:58 localhost kernel: ipfw: 56017 Deny UDP 192.168.1.103:51422 255.255.255.255:2222 in via en0
Dec 5 21:03:24 localhost DMProxy: theErr=-48 [line 145, file DMProxy.c]
Dec 5 21:03:24 localhost DMProxy: theErr=-48 [line 708, file DMProxy.c]
Dec 5 21:03:58 localhost kernel: ipfw: 56017 Deny UDP 192.168.1.103:51423 255.255.255.255:2222 in via en0
Dec 5 21:04:58 localhost kernel: ipfw: 56017 Deny UDP 192.168.1.103:51424 255.255.255.255:2222 in via en0
Dec 5 21:05:58 localhost kernel: ipfw: 56017 Deny UDP 192.168.1.103:51425 255.255.255.255:2222 in via en0
Dec 5 21:06:58 localhost kernel: ipfw: 56017 Deny UDP 192.168.1.103:51426 255.255.255.255:2222 in via en0
Dec 5 21:07:58 localhost kernel: ipfw: 56017 Deny UDP 192.168.1.103:51427 255.255.255.255:2222 in via en0
Dec 5 21:08:58 localhost kernel: ipfw: 56017 Deny UDP 192.168.1.103:51430 255.255.255.255:2222 in via en0
Dec 5 21:09:58 localhost kernel: ipfw: 56017 Deny UDP 192.168.1.103:51431 255.255.255.255:2222 in via en0
Dec 5 21:10:58 localhost kernel: ipfw: 56017 Deny UDP 192.168.1.103:51432 255.255.255.255:2222 in via en0
Dec 5 21:11:58 localhost kernel: ipfw: 56017 Deny UDP 192.168.1.103:51433 255.255.255.255:2222 in via en0
Dec 5 21:12:58 localhost kernel: ipfw: 56017 Deny UDP 192.168.1.103:51434 255.255.255.255:2222 in via en0
Dec 5 21:13:28 localhost crashdump: Unable to determine CPSProcessSerNum pid: 665 name: PocketMacUDriver
Dec 5 21:13:28 localhost crashdump: Started writing crash report to: /Users/mlevin/Library/Logs/CrashReporter/PocketMacUDriver.crash.log
Dec 5 21:13:29 localhost crashdump: Finished writing crash report to: /Users/mlevin/Library/Logs/CrashReporter/PocketMacUDriver.crash.log
Dec 5 21:13:58 localhost kernel: ipfw: 56017 Deny UDP 192.168.1.103:51435 255.255.255.255:2222 in via en0
Dec 5 21:14:58 localhost kernel: ipfw: 56017 Deny UDP 192.168.1.103:51436 255.255.255.255:2222 in via en0
Dec 5 21:15:58 localhost kernel: ipfw: 56017 Deny UDP 192.168.1.103:51437 255.255.255.255:2222 in via en0
Dec 5 21:16:58 localhost kernel: ipfw: 56017 Deny UDP 192.168.1.103:51438 255.255.255.255:2222 in via en0
Dec 5 21:17:10 localhost /Applications/Microsoft Office 2004/Microsoft Entourage: * Warning: ATSUMeasureText has been deprecated. Use ATSUGetUnjustifiedBounds instead. *
Dec 5 21:17:58 localhost kernel: ipfw: 56017 Deny UDP 192.168.1.103:51439 255.255.255.255:2222 in via en0
Dec 5 21:18:58 localhost kernel: ipfw: 56017 Deny UDP 192.168.1.103:51442 255.255.255.255:2222 in via en0
Dec 5 21:19:58 localhost kernel: ipfw: 56017 Deny UDP 192.168.1.103:51443 255.255.255.255:2222 in via en0
Dec 5 21:20:58 localhost kernel: ipfw: 56017 Deny UDP 192.168.1.103:51444 255.255.255.255:2222 in via en0
Dec 5 21:21:58 localhost kernel: ipfw: 56017 Deny UDP 192.168.1.103:51445 255.255.255.255:2222 in via en0
Dec 5 21:22:58 localhost kernel: ipfw: 56017 Deny UDP 192.168.1.103:51446 255.255.255.255:2222 in via en0I'm not aware of any, not to say that there aren't any issues.
it may have nothing to do with ntpd, there are a lot of things running.
ntpd just happen to make the log entry at the same time as the panic.
I would check to see if there are any updates available for you system.
if this is the first time that this has happened. it may be (pick one):
cosmic rays
sun spots
the trilateral commission
if this happens more frequently and that traces look the same, then
there may be a real problem that needs to be looked into further. -
Hello,
I run a small business network with five physical servers: three Dell servers running Windows Server 2008 R2, one custom build running 2008, and another custom build running 2012 with Domain Controller Role (same hardware for both custom builds).
The Dell servers are all running the Hyper-V role and each has a number of 2008 VMs. I also have a 2012 VM with the Domain Controller Role on one of the Hyper-V servers and another VM with a completely base install of 2012.
All servers are plugged into a Cisco SG300-52 switch which is uplinked to a Cisco 881 router which is connected to a cable TWC provided Ubee cable modem. I have no VLANs setup. I do have the Firewall on the router configured
to inspect most traffic.
Here is my problem: I cannot connect to most of the internet on ANY 2012 server (and all exhibit the exact same behavior), but I have NO problems connecting to the internet from 2008 servers. Here is what I already know:
1.) I can ping the outside world just fine so ICMP is passing to any external host.
2.) Two of the 2012 servers are DCs running DNS services and they can connect to the internet just fine for DNS requests because they are doing a perfectly good job of providing DNS services to my network.
3.) Here's where it gets really weird: I can browse in internet explorer to Bing.com and it works. I can also go to a couple other Microsoft websites (though they are very slow). If I click on any link in Bing, however, it doesn't
work and gives me a page not available error. If I connect to a non-MS website like Google or my company website, I get page not available.
4.) I have tried to telnet to port 80 at Bing and it works. I have tried to telnet to port 80 at google.com and it won't connect. The 2008 servers have no issue telneting to either bing or google on port 80 and none of my client
PCs on the network do either.
5.) Windows Update will not connect and neither will any other update service such as AVG (I have AVG Antivirus installed WITHOUT firewall on two of the three servers. The base 2012 VM has no software installed and no roles...I built it
just to see if it could connect after a fresh install and it still cannot.)
6.) The network connection does not indicate limited connectivity (probably because ICMP appears to be passing successfully)
7.) If I connect the server directly to the modem it has full internet access.
8.) All internal LAN connectivity is perfectly fine and runs at full speed.
9.) I have scoured the internet trying to find other examples of this particular kind of connectivity issue on 2012 and I have found two TechNet articles that are similar, but they both had the same resolution: changing the router
worked, but no one knows why. (I would have included the links, but apparently I cannot do that yet)
My question is this: What is different about Windows Server 2012 networking that would render it unable to communicate through a router that Windows Server 2008 has no problems with? I ask because, unlike in these two articles where they were
running personal networking equipment they could easily upgrade, I'm running a Cisco 881 with what should be virtually limitless configuration options and I have no desire to replace it. I have to assume the issue is somehow related to the firewall configuration,
which I could fix easily, but I don't know what to change. If anyone knows what changed in 2012 and why I would be able to browse to bing and other MS sites but no where else, please pass them along. Thanks.This is the IP Config for the 2012 DC:
Windows IP Configuration
Host Name . . . . . . . . . . . . : COMPANYDC02
Primary Dns Suffix . . . . . . . : company.local
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : company.local
Ethernet adapter Ethernet:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) 82574L Gigabit Network Connection
Physical Address. . . . . . . . . : 00-25-90-DC-EF-D5
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::81d5:53cf:bd07:14ed%12(Preferred)
IPv4 Address. . . . . . . . . . . : 10.10.10.202(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 10.10.10.1
DHCPv6 IAID . . . . . . . . . . . : 301999504
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1A-96-D5-C3-00-25-90-DC-EF-D5
DNS Servers . . . . . . . . . . . : 10.10.10.202
10.10.10.221
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.{9929D989-8E88-4096-A1CB-61F1DB173FA3}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Teredo Tunneling Pseudo-Interface:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Teredo Tunneling Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
This is the IP Config for the fresh install 2012 VM:
Windows IP Configuration
Host Name . . . . . . . . . . . . : WIN-800299O7ES6
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : company.local
Ethernet adapter Ethernet:
Connection-specific DNS Suffix . : company.local
Description . . . . . . . . . . . : Microsoft Hyper-V Network Adapter
Physical Address. . . . . . . . . : 00-15-5D-0A-5C-02
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 10.10.10.49(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Saturday, August 23, 2014 10:23:01 PM
Lease Expires . . . . . . . . . . : Wednesday, August 27, 2014 10:23:01 PM
Default Gateway . . . . . . . . . : 10.10.10.1
DHCP Server . . . . . . . . . . . : 10.10.10.1
DNS Servers . . . . . . . . . . . : 10.10.10.220
10.10.10.221
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.company.local:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : company.local
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
NOTE: 10.10.10.220 and 10.10.10.221 are the other domain controllers on my network. One of them is 2012 and one of them is 2008. They are both functioning correctly for providing DNS services. The 2012 Virtual DC, however, still has
the internet connectivity issue that this whole post was about in the first place.
NOTE2: When I logged on to COMPANYDC02 this morning, it told me that I had new Windows Updates that needed to be downloaded. Confused, I checked the most recent time WU had checked for updates at it had successfully checked for updates last night
at 10pm. Of course, it failed when trying to download them, but it appears that once in a while, a connection gets through successfully... -
Firefox keeps crashing, no idea why.
So I recently switched from Opera to Firefox because they had a horrible updated that stripped all the features I loved. Anyways, the first week or so after using firefox it worked fine and never crashed, now recently it crashes almost every 30 minutes or so. I get a crash report asking me if I want to restart. I have no idea why it keeps crashing and I have tried closing all my tabs (I usually have about 6-7 open at all times), but the problem is still there. If you need any information ask and I'll give it. Thanks!
AdapterDeviceID: 0x6719
AdapterVendorID: 0x1002
Add-ons: pavel.sherbakov%40gmail.com:5.0.1,%7B972ce4c6-7e08-4474-a285-3208198ce6fd%7D:27.0.1,%7Bd10d0bf8-f5b5-c8b4-a8b2-2b9879e08c5d%7D:2.4.1,jid1-xUfzOsOFlzSOXg%40jetpack:4.3.1.2,jid0-SmvlvxGpvCyG252KbVMqIKR79Uc%40jetpack:5.7,jid1-cwbvBTE216jjpg%40jetpack:2.1.0,troubleshooter%40mozilla.org:1.1a
AvailablePageFile: 11003035648
AvailablePhysicalMemory: 3007905792
AvailableVirtualMemory: 507674624
BIOS_Manufacturer: American Megatrends Inc.
BlockedDllList:
BreakpadReserveAddress: 43646976
BreakpadReserveSize: 37748736
BuildID: 20140212131424
CrashTime: 1392614224
EMCheckCompatibility: true
FramePoisonBase: 00000000f0de0000
FramePoisonSize: 65536
InstallTime: 1392386464
Notes: AdapterVendorID: 0x1002, AdapterDeviceID: 0x6719, AdapterSubsysID: 31221682, AdapterDriverVersion: 13.152.1.8000
D2D? D2D+ DWrite? DWrite+ D3D10 Layers? D3D10 Layers+
OOMAllocationSize: 104
ProductID: {ec8030f7-c20a-464f-9b0e-13a3a9e97384}
ProductName: Firefox
ReleaseChannel: release
SecondsSinceLastCrash: 25707
StartupTime: 1392607069
SystemMemoryUsePercentage: 64
Theme: classic/1.0
Throttleable: 1
TotalVirtualMemory: 4294836224
URL: http://www.imdb.com/title/tt1448755/?ref_=nm_flmg_act_11
User32BeforeBlocklist: 1
Vendor: Mozilla
Version: 27.0.1
Winsock_LSP: MSAFD Tcpip [TCP/IP] : 2 : 1 :
MSAFD Tcpip [UDP/IP] : 2 : 2 : %SystemRoot%\system32\mswsock.dll
MSAFD Tcpip [RAW/IP] : 2 : 3 :
MSAFD Tcpip [TCP/IPv6] : 2 : 1 : %SystemRoot%\system32\mswsock.dll
MSAFD Tcpip [UDP/IPv6] : 2 : 2 :
MSAFD Tcpip [RAW/IPv6] : 2 : 3 : %SystemRoot%\system32\mswsock.dll
RSVP TCPv6-tjänstprovider : 2 : 1 :
RSVP TCP-tjänstprovider : 2 : 1 : %SystemRoot%\system32\mswsock.dll
RSVP UDPv6-tjänstprovider : 2 : 2 :
RSVP UDP-tjänstprovider : 2 : 2 : %SystemRoot%\system32\mswsock.dll
useragent_locale: en-US
This report also contains technical information about the state of the application when it crashed.
Thats whats in the crash report after it crashes. I always check the submit to mozilla checkbox when it crashes but that doesn't help me solve it. -
I have never previously had any problems with Home Sharing, I have always found it to be completely reliable as advertised. I have 2 computers in the house, (one MacBook and one Windows Desktop) connected to the same Home Sharing account, connected to the same BT Home Hub 4. My situation is that I have nearly 2TB of data of which I would like to share with the home wirelessly, in my mind the desktop is the logical place for this to be shared from.
When running, iTunes on this desktop broadcasts to other iTunes libraries, but no other iOS devices or Apple TV's connected to the same Home Sharing account cannot see it.
I have tried turning Home Sharing off, and then turning it back on, closing iTunes, restarting the computer, going to Network and Sharing Centre and unticking IPv6 in the network adapter properties, even completely wiping the computer and reinstalling Windows 7.
One of the Apple TV's in the house was recently purchased by my parents with the promise from me that everything would work seamlessly... so far it isn't and I am frustrated that the Apple technology that I have come to rely on isn't working as expected.
One thing that has occurred to me upon writing this is that it is a very large amount of data, and I have not attempted to share this with another computer that is currently working and broadcasting it's Home Share fine.
I am sorry if I have ommitted any important details, any further questions don't hesitate to ask. I would be so grateful of any suggestions, my parents are depending on me.I have found with AppleTV that it is the IPV6 on the computer you want to access is the problem. The issue is that Homegroup on Win 7 or Win 8 requires IPV6 to work, but AppleTV won't work with IPV6. (So maybe double check you have IPV6 turned off)
So you have to make a choice - Homegroup or AppleTV.... but you can't have both, until Apple brings ATV up to date. (crazy that it does not recognise IPV6 - c'mon Apple!)
You can set up sharing individually in Win 7 or 8 and have the ATV access files that way.
Having said that, there is always the exception.. I have an old HP home server running Win8 and it services ATV - but is part of the Homegroup... have no idea why it works on both, but no other machine on the home network will talk to both ATV and Homegroup at the same time! -
Safari 5.1.7 is behaving badly. It's sloooooow. Why?
Safari is going so slowly I'm about to scream. The ball just rolls and rolls and rolls when loading or reloading a page.
What are the possible reasons and how do I fix this. It's driving me crazy! Thanks.Thank you for the reply... but I'm thinking that since this is something I absolutely do not know how to do, I might mess it up and then what would I do to get it back?
I know nothing about DNS other than what it means.
The instruction from Apple is seriously lacking and google says:
Note: We recommend that only users who are proficient with configuring operating system settings make these changes.
The instructions are:
Example: Changing DNS server settings on Mac OS 10.5
From the Apple menu, click System Preferences, then click Network.
If the lock icon in the lower left-hand corner of the window is locked, click the icon to make changes, and when prompted to authenticate, enter your password.
Select the connection for which you want to configure Google Public DNS. For example:
To change the settings for an Ethernet connection, select Built-In Ethernet, and click Advanced.
To change the settings for a wireless connection, select Airport, and click Advanced.
Select the DNS tab.
Click + to replace any listed addresses with, or add, the Google IP addresses at the top of the list:
For IPv4: 8.8.8.8 and/or 8.8.4.4.
For IPv6: 2001:4860:4860::8888 and/or 2001:4860:4860::8844
Click Apply and OK.
Test that your setup is working correctly; see Testing your new settings below.
Repeat the procedure for additional network connections you want to change.
I have no clue which setting needs changing or what IPv4 or IPvv6 mean or why why one should be chosen over another. This looks an easy way to really screw things up since I have no knowledge about this sort of thing.
Is this the only way to fix the problem?
Thanks.
Maybe you are looking for
-
MALWARE! How do I remove "SEARCHBENNY" from my desktop?
Malware got installed when I tried to download free clip art. (Bad idea) I have found instructions online for removal, but the second step, after "restarting holding the shift key" requires trashing the icon. Problem. It won't stay in the trash. H
-
** Is it possible to create new BPM instance for each record (Multiline)
Hi friends, In my scenario, JDBC adapter (sender) polls the open purchase order items from the table at the specified interval and send to BPM. In BPM, we used transformation step to split the messages to process each PO . The scenario is working fin
-
Material Valuation Transaction Codes to fill the new records in MBEW table
Hi Experts, May i know the Material Valuation Transaction Codes because i want to fill the MBEW table with changed(new) records. Thanks in advance. Regards, <BMP>
-
Hi Everyone, I assinged a job using dbms_job package whose interval is after every 5 minutes. But the jobs are not activated i.e, not running. Can anybody explain me to solve this problem. Thanks Krishna
-
Scheduling Discoverer Reports in Bulk (without GUI) - is there a way?
Hi all, I'm looking for a way to schedule a bunch of reports without using the GUI (there's zillions of reports that run well most of the time but sometimes some of them don't work, so instead of having people going mad clicking through all of them i