Why is my audio 2 frames off of my video?

when capture video and playback the audio is exactly 2 frames behind. why is this? is it an equipment issue or is it an upload/setting issue? i'm not using the built in mic but an add on shotgun mic that plugs into camera directly. it's fixable but tediously so.

Usually it's a mis-match between camera audio rate and the FCE Sequence.
For example: If the camera shot 12 bit or 32 kHz audio and the default FCE Sequence 16 bit or 48kHz is used, unless it's changed to match, sync issues arise.
If you provide specific info on these items we may be able to assist with the trouble.
Al

Similar Messages

Audio suddenly drop off when Airplaying video into Apple TV

I´m trying to stream the content from my MacBook Air into my TV via my Apple TV using Airplay. Both audio and video work fine the first seconds on the TV then, suddenly, the sound drops off.
All the sw is updated, the problem began after the latest Apple TV update.
Does anybody have any ideas on how to solve this ?? (The solutions exposed in other threads doesn´t solve my problem)
Thank you in advance

+I figure the wireless transfer between the Mac mini and the Apple TV would be the limiting factor, but felt it prudent to at least check if the Firewire connection would have an effect.+
+If not, then I plan on picking up a cheap, used older model Mac mini with the 400 Firewire port to save some cash.+
No doubt the wireless transfer is the weakest link in the chain. Firewire 800 is substantially faster than 400, so you would gain some future-proofing by going with it. And the 2009 Minis come with Wifi-N, while the older models come with G/B.
A used Mini will usually lack the Apple warranty.
Minis are so handy that you have to ask yourself, why is someone getting rid of it? My somewhat cynical answer is that many Minis being sold on the used market are being gotten rid of because of some lurking problem issue that the owner hasn't been able to resolve.
If you must buy an older model, consider an Apple refurbished Mini, which comes with full warranty and current software.

Audio is way off in converted videos on ipod...slowly gets worse

Any help on fixes....Progressively gets out of synch with the video as movie plays. Easiest fixes appreciated. Thanks, JY

Fair enough....Videora was my program. No problems getting videos changed over from mpeg to proper format. Got them into itunes and onto my ipod 30gb video. Audio starts off fine, then slowly gets behind more and more during movie.
I read a little about how this can happen. Video is running at a different speed than audio from the get-go. The more time the movie is, the longer the difference gets.
I'm lost on some of the settings people say to use. Need a fix, hopefully with videora, since I've converted several movies already through that. Any help would be great, and hopefully you can explain it with some detail if you do have some info.
Thanks, JY

Why does my audio disappear after I publish my videos to a MPEG in Elements 8?

I'm using Elements 8 and my video looks and sounds find until I publish it. When I publish it as an MPEG, the video is there, but the audio is gone. What should I do?

Post a screen shot of your share settings
https://forums.adobe.com/thread/1070933 for screen shot instructions

Using Overwrite, snapped PC files from Vegas are 1 frame off in timeline!

Perhaps someone here can offer some help...
I was given a 30 minute piece of video that someone else created and started in Sony Vegas on PC. I have to finish the project in FCP. I personally did the final Audio soundtrack myself in Pro Tools. I am syncing that with this video, that had a "rough" early version of the same audio.
The person who gave me the files delivered them in AVI format. As many editing programs do, Vegas apparently split the 30 minutes of video/audio (around 6 gig of DV-NTSC 29.97 video) into multiple 1 gig pieces. So I have 6 (1gig) .avi clips that should snap back together frame accurate to get the 30 minutes back in the timeline in FCP.
So, I setup a standard DV-NTSC FCP project and I imported my audio first, so I could verify time cues, etc.
I import the AVI files, then Snap them in the timeline front to previous end, carefully, using Overwrite.
However, all of the video files are exactly 1 frame off at the end of each clip. As if either the Vegas splitting chopped off a frame at the end while splitting, or FCP is losing a frame as I import and then snap it in the time line. I can determine that it is exactly 1 frame, because of my "final", non-split audio track that is sync'd just underneath it. At the timeline area where each new clip gets snapped in, I can zoom way in and determine that the rough audio from the video track, is off by a frame with my final audio track.
It's not a drift problem, because if I line up each single clip on it's own with my audio, it stays perfectly in sync until the final frame. Then it's 1 frame short.
So by the time I snap in 6 clips, my video is exactly 6 frames off at the ending with my audio track (which I know is correct).
Sorry for being a bit lengthy, but it is hard to explain otherwise...
Is there something I am overlooking? Shouldn't FCP handle the AVI files okay? The person who gave the files to me from Vegas states that they should be frame accurate regardless of the split.
I am going to try them in another program to see what I discover, but I am stumped right now in Final Cut Pro? (That is assuming the Vegas splits were correct? Maybe that is the culprit?)
Thanks for any thoughts!
Wade

Thanks David...
I was able to finally conducted a test. I went to a friends studio that runs Premiere Pro 2.0. I checked the files there and the split AVI files do line up frame accurate perfectly and there were no frames cut off. (No surprise as it's PC files used in a PC format
Also, I first mentioned that I thought it was the end of the file that was missing a frame. It actually looks to be the opposite. It's at the front of the file that is off and missing 1 frame.
So, shouldn't I be able to use the AVI files in FCP frame accurate? Is there some dummy setting I am missing? Lastly, since AVI files are not the best format to use in FCP, can anyone recommend a conversion method for me to use for these files in FCP?
Thanks again!
Wade

Captivate 5: Audio is cut-off at the end of the published file

Hi,
I'm using Captivate 5. I published my projects to Flash 10 (SWF/HTM) format and the audio is always cut-off at the end. For example, if my last slide has this audio "Thank you for time and have a good day.", what you will hear is only "Thank you for your ti" or "Thank you for your time and have". This only happens on the published file. The audio is not cut-off when you preview the project.
Here are additional observations:
-> If I published with playback controls, the audio is cut-off the first time i view the output; however, the second time I view the output or if I drag the playhead, the audio is no longer cut-off. The timing of the elements (mouse, highlights, audio, etc.) is also way better when I view it the second time versus the first time.
-> If I published without playback controls, the audio is always cut-off no matter how many times I view the flash file.
-> I have tested publishing to Flash with different # of slides (10 slides, 50 slides, 100 slides) and the result is the same. So I don't think it has something to do with the number of slides.
> Note also that the last slide has enough audio to match the slide's length. So I don't know why it's cut-off.
Thank you in advance for your assistance.
Regards,
Rose

Hi MagicBBB,
A patch to address this issue is available. Check for updates from the application through Help >> Updates.
Also have a look at the release notes here. http://kb2.adobe.com/cps/881/cpsid_88142.html
Please try out the patch and let me know.
Thanks,
Ashwin Bharghav B
Adobe Captivate Team

Noisy audio + audio output turns off / on - annoying

The audio out on a MBP (10.5.4) turns off after about 30 seconds, then turns back on when it makes any sound such as an alert sound, playing a song in iTunes / Quicktime, etc...
Case and point: Listen with headphones (or with your ear close to the laptop speaker) and do something that requires audio - e.g. just duplicate a file using Apple+D, you'll hear your alert sound. Then listen for 30 seconds - you will hear a faint hiss (with good headphones), then a click/pop as the audio turns off. WHY?
And this is really annoying: there is also a click/pop sound when you start to play something if the audio has turned off, i.e. the audio output has to turn itself ON again. Plus, in iTunes there is digital distortion and some very faint high-frequency hums.
I have my old PowerBook G4 sitting next to this MBP and it does NOT do this. So it begs the question: Why does Apple have to change things like this? Why change the audio output to turn off after 30 seconds? How is it that iTunes on a MBP creates digital distortion?
There is NO digital distortion within iTunes on the Powerbook G4. (I compared the same exact track from iTunes on the MBP to iTunes on the Powerbook G4.) There is NO digital distortion when playing audio through Quicktime on either laptop.
I don't get it. Apple/Mac should be improving their products. They bought Logic 8 from Emagic! That must mean they are interested in audio, yes? Then WHY cheapen the audio outs?
This is essentially a post to see if there has been any fixes for this problem, or to see if Apple/Mac really care or noticed. I hope it is the former.......

I have a brand new Macbook Pro Unibody 15'', which presents the same issues, but with some peculiarities. I have M-Audio reference speakers, connected with an analog cable minijack to RCA cable (note: they work perfectly when connected to the ext. firewire audio interface..) .
The weird thing is related to whether I have the power cord plugged in or not:
- with the magsafe power cord plugged in I only hear the intermittent "high pitched noises" described here: http://tech.kateva.org/2007/06/macintouch-review-audio-noise-in-new.html. They are apparently random .
- when I unplug the power cord I can hear all kind of sounds and noises: I can hear the harddrive spinning and seeking, a "fixed" background hum noise, more noises even when I type or move the mouse or use the trackpad.
UPDATE: When the external audio interface is not plugged in (it's a M-Audio firewire solo) I hear no more noises from the internal audio output ! Must be all related to some grounding issues of the audio interface.

Why doesn't my duplicate frame work in photoshop 2014?

why doesn't my duplicate frame work in photoshop 2014?
I draw a figure in frame 0 then duplicate frame. After the frame is duplicated I move the figure over to make sure there are different frames but as soon as I check the first frame Ive noticed that both frames have moved together. So nothing has changed. Why?

I always create the individual frames in layer groups first. So build what you need, break them up or duplicate them, position them where you want them and then create your frames by turning off all the layer groups or layers you don't need.
Here is an example of one of my layer pallets:
Each scene is a frame and I turn them on and off as I need them.

Video and audio sync is off

I have a video that was captured using the Hauppauge Win-TV 950Q and the Win TV software package. The file plays just fine in WinTV or using the Windows Media Player, but the timing of the audio and video seem to slip if I import it into Premiere Elements. I am using version 10, so I don't know if this is something that was fixed in a newer version. Over the course of an hour, the audio goes from off by about a second at the beginning to being something on the order of eight seconds behind at the end of an hour. Anyone know how to fix this?
Thanks
-Bob

thanks for looking! If I knew the answers to all your questions, I probably would know what's wrong and how to fix it. I am not looking to do anything exciting here, just trying to archive a program to a playable DVD. Well - I have it playable, it's just not watchable unless you can deal with badly synced audio.
Loaded up mediainfo and it says the frame rate is 29.97, but a variable bit rate for video and constant audio.
I will look into handbrake.
Oh - and Win 7 OS...
It's probably more than necessary - but here's the text output:
General
ID                                       : 0 (0x0)
Complete name                            : C:\Users\Public\Videos\S-Video_20141020_1928.ts
Format                                   : MPEG-TS
File size                                : 3.00 GiB
Duration                                 : 55mn 32s
Overall bit rate mode                    : Variable
Overall bit rate                         : 7 740 Kbps
Video
ID                                       : 1001 (0x3E9)
Menu ID                                  : 1 (0x1)
Format                                   : MPEG Video
Format version                           : Version 2
Format profile                           : Main@Main
Format settings, BVOP                    : Yes
Format settings, Matrix                  : Default
Format settings, GOP                     : M=3, N=12
Codec ID                                 : 2
Duration                                 : 55mn 32s
Bit rate mode                            : Variable
Bit rate                                 : 7 163 Kbps
Maximum bit rate                         : 8 500 Kbps
Width                                    : 720 pixels
Height                                   : 480 pixels
Display aspect ratio                     : 16:9
Frame rate                               : 29.970 fps
Standard                                 : NTSC
Color space                              : YUV
Chroma subsampling                       : 4:2:0
Bit depth                                : 8 bits
Scan type                                : Interlaced
Scan order                               : Top Field First
Compression mode                         : Lossy
Bits/(Pixel*Frame)                       : 0.692
Time code of first frame                 : 02:17:15:16
Time code source                         : Group of pictures header
Stream size                              : 2.78 GiB (93%)
Audio
ID                                       : 1002 (0x3EA)
Menu ID                                  : 1 (0x1)
Format                                   : MPEG Audio
Format version                           : Version 1
Format profile                           : Layer 2
Codec ID                                 : 4
Duration                                 : 55mn 32s
Bit rate mode                            : Constant
Bit rate                                 : 192 Kbps
Channel(s)                               : 2 channels
Sampling rate                            : 48.0 KHz
Compression mode                         : Lossy
Delay relative to video                  : -297ms
Stream size                              : 76.3 MiB (2%)
Menu
ID                                       : 1000 (0x3E8)
Menu ID                                  : 1 (0x1)
Duration                                 : 55mn 32s
List                                     : 1001 (0x3E9) (MPEG Video) / 1002 (0x3EA) (MPEG Audio) / 1003 (0x3EB) ()

Why can't I delete pictures off of camera roll. I also can't send a picture to a friends phone. One last question.......why do pictures freeze up on the screen and I have to hit the power button to go back to home screen. Thanks for any help.

Why can't I delete pictures off of camera roll? I also can't send Pictures to someone else's phone. My picture seems to freeze up and I can't do anything, particularly delete the picture. I'm new to iPhone so I'm really just learning how this iphone thing works :)

Did you recently start using iCloud to backup your photos?
Wife had the same problem today. Remembering that I had recently signed her up for more space on iCloud and started backing up her photos, I decided to roll the dice and turn that off. Plug phone back into computer and *boom* I now have the option to delete. Now I just have to figure out how I can do both = \

Why does my iMac display go off when I am starting up or waking up my machine from sleep..

Why does my iMac display go off when I am starting up or waking up my machine from sleep..?
When my iMac goes to sleep I then later try to click the magic track pad or keyboard and it will usually then show the initial password entry login screen and then go off. The machine is still on but the display is black and will sometimes flash up the screen again if I press the magic track pad or keyboard but will then black out again..

Well, there are many different reasons why it does this. It might shut off due to power voltage problems, system overheats, or there is a System Problem. The reason it might be hard to boot up is because your power button might not work properly or your system hard drive is damaged.
<Email Edited by Host>

Why when I am downloading music off iTunes it's not going on my music? It says it is downloading and that its done then I go into my music and nothing is there

Why when I am downloading music off iTunes it's not going on my music? It says it is downloading and that its done then I go into my music and nothing is there

Did you go to purchased in itunes check if you have bought it.

WHY HEWLETT PACKARD ROYALLY PISSES ME OFF?

Shows on bottom right of my monitor:
Windows 7
Build 7601
This copy of Windows is not genuine
Dear HP (Assuming I am speaking to HP directly)
I have an HP Pavilion purchased about 2 years ago (a birthday present from my wife). It came with Windows 7 Home Premium pre-installed and disc but with no disc key code. I was having problems with the system running extremely slow so I took it to Staples tech people. They kept it for 4 days, tried everything but nothing worked. They suggested I purchase an external hard drive and transfer all my files, etc. to same which I did but my computer still ran slowly. Thus, out frustration and after spending $300 for tech services and external hard drive, I decide just to install the Windows 7 disc that came with the computer. This, of course, started me back to square one … I had to start as though it was a new computer with no personal saved files, etc.
I seemed to get everything back to normal and had no “slow running” issues. Then, a message started popping up that my version of Windows was not genuine. I searched my computer, found the presumed key code and entered it but it was and continues to be rejected as not valid no matter what I do. Since the time to valid has expired, my Windows screen is black, the clock is always wrong and other annoying things won’t work.
I called your support line and got the runaround. Eventually, my line with your representatives, before I had a solution, was disconnected and I was not about to go through that HELL again. Searching the Web, I was advised that this was a HP issue that you could resolve. If not, Microsoft wants me to spend $150 for another Windows 7 program. After adding up all my expenses thus far to fix my original “slow” problem, I could have bought a brand new computer and I am not going to waste any more of my money. This is why I am so angry and have made my anger known to all my Facebook friends.
Below, I have copied and pasted all the information I was able to gather from my computer operating system, computer battery and Windows information. If you can help me, it would certainly be appreciated and change my opinion of HP which I will immediately make known to my Facebook friends and remove any negative comments I have made about HP.
WHAT'S THIS YOU WROTE? I STILL HAVE NO ANSWERS TO MY PROBLEM. INCREDIBLE!!!
"Registration Confirmation
John, thank you for registering your product!
We will e-mail you a copy of your registration for your records. We recommend that you save the e-mail, and use it to create or access your HP Account in the future."
You have successfully created an HP account.
Bottom of Form
Product name:
HP Pavilion HPE h9-1118tw Phoenix Desktop PC
Model name:
QF034AA
Serial number:
Top of Form
Register another product ›
Bottom of Form
Protect
Avoid downtime. Protect your product with an extended service plan:
HP Care Pack Services ›
Register Your HP Care Pack ›
Explore and create
We were unable to verify your productDrivers & Updates
·Warranty Status
·Additional Support
This tool recommends the latest print driver software to keep your HP product up-to-date.
No Action Needed:
HP recommended software installed and up-to-date.
If your product is not printing or scanning correctly, you may want to try the HP Printer Install Wizard to identify software issues. Click the link below to begin:
HP Printer Install Wizard for Windows »
No Action Needed:
Windows in-Operating System (in-OS) print driver is installed and is currently the only driver available for this product.
For more information on getting the best functionlity from your product with this print driver, click the link below:
In-OS Print Driver »
Action Needed:
Your print driver software is missing or a better version is available. HP recommends installing the following software. Click the link below to begin:
Product Not Supported:
This product is not currently supported by this tool.
Error:
This tool experienced an error while trying to identify the print driver software for your product.
To view additional software for this product, click the link below:
To view all of the software available for this HP product or the HP Printer Install Wizard for Windows, click below:
Software & Driver Downloads »
HP Printer Install Wizard for Windows »
Please wait while we scan your product for solutions and updates.
Your Product:
This should take 1-2 minutes, depending on your computer and connection speed.
HP was unable to verify that you have this product, but did find other products.
HP Pavilion HPE h9-1118tw Phoenix Desktop PC
» Software & driver downloads
» Support & troubleshooting
» Learn how to help HP find your product
Detected Products List HP Pavilion g6-1a30us Notebook PC
Serial Number:
Product Number:
LQ537UA
Check Warranty Status »
MY PRODUCT:
HP Pavilion g6-1a30us Notebook PC
ACTUAL PRODUCT KEY:
Windows 7 Professional Service Pack 1
Product Part No.: X15-39655
Installed from 'Full Packaged Product' media.
Product ID: match to CD Key data
Product Key Windows 7 -
Computer Name: JOHN-PC
Registered Owner: John
Registered Organization:
ON THE BATTERY INFORMATION:
REPLACE WITH HP SPARE
CT: 6BZLU03SP0QHTV
Right side of battery numbers: 593553-001 and immediately underneath those numbers are the numbers 2011/05
INSIDE BATTERY COMPARTMENT INFORMATION
Right PAVILION g6
Serial:
Product: LQ 537 UA#ABA
Regulatory Model: HSTNN-194c
Model: g6-1a30us
HP LAPTOP SERVICE Called 1/14/13
Telephone Log
Dialed: 1-800-474-6836
Spoke to Evan – Cannot help. Transferring me to another person
Transfer to OUT OF WARRANTY dept.
Phone 1-866-442-7039
Name: Jeff
Cannot help. Transferring me to another person
Spoke to Moses
Phone disconnected.
Been on phone about 1 hour.
GAVE UP. FRUSTRATED.ANGRY. BROKE. ANNOYED.
I have scanned the Windows 7 Disc, its’ packaging and miscellaneous notes I recorded throughout this ordeal hoping they might be a value. I have included them as attachment to this e-mail.
If you can be of assistance, I will be most grateful.
Sincerely,
John H
P.S. - Don't see where I am able to send you (Assuming I am speaking to an HP Representative) the attachments I mentioned. Why can't I have someone's actual e-mail address so I can respond one-on-one via sending mail through my Gmail account? I feel this "posting" method is clandestine .. cloak and dagger kind of stuff. Feel like HP folks are a kind of Watergate "Deep Throat" kind of characters, hiding just out of sight in the shadows. PLEASE GIVE ME JUST ONE, LIVING, BREATHING HUMAN BEING I CAN COMMUNICATE WITH AND STOP MAKING A CLOWN OUT OF ME!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
{personal info removed}

WANT TO KNOW WHY HEWLETT PACKARD ROYALLY PISSES ME OFF? You have a computer problem and you call their HELP SUPPORT LINE. This takes you somewhere to the far side of the earth. The FIRST CLOWN who answers, AFTER collecting all your personal information, product information, product codes, serial numbers, etc. and, AFTER having you explain your problem in minute detail, tells you he has to transfer you to a DIFFERENT department. AFTER BEING TRANSFERRED, the SECOND CLOWN, AGAIN, AFTER collecting all your personal information, product information, product codes, serial numbers, etc. and, AFTER again explaining your problem, tells you he has to transfer you to YET ANOTHER department. FOLLOWING SEVERAL MORE REPEATS OF THE SAME ORDEAL AND TALKING TO MANY CLOWNS, all the while praying you don’t get cut off and have to start the entire hellish process anew, you finally reach who you hope to be THE MAIN CLOWN who will finally resolve your problem with THE PRODUCT YOU PURCHASED FROM THEM. DOES HE HELP? HELL NO! He says you need to call some other manufacturer or you have to purchase something from them to correct the problem or you have to pay them to give you their support. SO, you have wasted your ENTIRE day on the phone talking to ALIEN CLOWNS who have been leading you around in circles like an elephant in a circus holding the tail of the elephant in front of him, getting no solution to your problem and trying to communicate with CLOWNS who speak unintelligible English. WELL, the irony is, ALL these “CLOWNS” have made you the BIGGEST CLOWN OF THEM ALL andall you are left with is: “Thanks for calling Hewlett Packard and have a nice day”.

Why can't I print things off th Internet?

Why can't I print things off the Internet?

If you are not experiencing an error message, then try this:
Smart Print
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

Why is the audio on my finalized project different than when I'm editing it?

Why is the audio on my finalized project louder than the when I watch it on the editing screen? The background music doesn't turn down when I watch the final product and I cannot hear the clip, but on the small/edit screen it works perfectly.

Have you already exported it and is it there where it messes up? If you are just clicking the button that makes the video full-screen in iMovie, that's your problem. For some reason, many people have movie glitches when they do that, like the video pausing for no reason, loss of sound, and other glitches. Just export it and it will most likely work.

Why is my audio 2 frames off of my video?

Similar Messages

Maybe you are looking for