Why is the fontd process using up to 80% of CPU when I have InDesign CS6 open?

Macbook 13-inch, Aluminum, Late 2008
OS X 10.8.4
2.4 GHz Intel Core 2 Duo
This problem has arrisen within the past week and only happens when InDesign CS6 is open. I cleared the font cache last time and ran InDesign right after with no problem. Just started happening again. What gives?

Yeah, Font Book is how I've been importing many many different fonts I've been using in projects. I've skimmed the article you linked some more and it's great! I need to make the time to sit down and read it in depth to get it all down.
What's seemed to solve the probelm was repairing the disk and repairing permisions both a few times. That seemed to fix the issue entirely as there were some kinks in there that needed to be worked out from the recovery drive. Since then I haven't seen the fontd issue arrise again. If it does I'll post here. Thanks for your help!

Similar Messages

Why does the Retina Screen on MBPR2013 make a Weird Flash when I have a External Display via HDMI hooked up?

I just bought a new 2013 early MACBOOK PRO RETINA. When i have an external Display hooked up via the HDMI port, I noitce when I wake the computer UP it has a Different type OF QUICK FLASH that comes up than when there is nothing hooked up so I don't know if that makes sense to anyone, but its very disturbing to me, it makes me wonder if there is something wrong with the HDMI PORT ????? Has anyone else experienced this or knows if this is NORMAL behavior of the new RETINA displays or the HDMI port makes it FLASH weird upon WAKE UP??? I have unplugged the HDMI and when I do the SCREEN comes up normally it just blinks on. But when HDMI is used its light lightening stike. Don't know how else to explain it, maybe i need to do a video and Post a video.

One more disturbing thing. When the screen on my MBP goes black and I check the system preferences for "Displays", the MacBook Pro display is not presented as an existing display. Only the still-functioning Apple 20" Cinema Display.
Where did it go??

Why does the YouTube app say playback error every time even when I have wi-fi

When I try playing a video it keep saying playback error even when I have wi-fi on. This has happened a few days ago.

I notice that the WiFi is "white", like all good KitKat icons, instead of White for connected with no internet, and blue for fully functioning.
The 1x right next to it seems very dim. If I turn off WiFi, the 1x gets bright white, and has the up/down arrows under it.
If having the icon on my status bar all the time means that I actually will get data when I leave WiFi, then it's a winner.
I "hotspot" a lot, and I used to have to make sure I had a data connection and launch the hotspot before I got on a phone call, because the only way to get it to connect was to power cycle the phone.
-- Clarence

Why would the fan on my macbook be constantly runs, even when no applications are running. Why?

Why would the fan on my MacBook constantly run? Even when I have no applications running? Is there a way to determine what is causing this to happen?

JAWade, try resetting the SMC and pram. Not always, but often those resets help problems like yours. Follow these instructions exactly.
To reset the SMC
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
Resetting PRAM and NVRAM
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Error While Deploying the BPEL Process using obant script

Hi All,
I am getting the following error while deploying the BPEL Process using obant script. we are using the BPEL Version 10.1.2.0.2.Any information in this regard will be really helpful.
Buildfile: build.xml
main:
[bpelc] file:/home5102/dibyap/saravana/Test/CreditRatingService.wsdl
[bpelc] validating "/home5102/dibyap/saravana/Test/CreditRatingService.bpel" ...
BUILD FAILED
/home5102/dibyap/saravana/Test/build.xml:15: ORABPEL-01002
Domain directory not found.
The process cannot be deployed to domain "default" because the domain directory "/opt02/app/ESIT/oracle/esit10gR2iAS/BPEL10gR2/iAS/integration/orabpel/domains/default/deploy" cannot be found or cannot b
e written to.
Please check your -deploy option value; "default" must refer to a domain that has been installed locally on your machine.
Total time: 23 seconds
dibyap@ios5102_ESIBT:/home5102/dibyap/saravana/Test>
Thanks,
Saravana

In 10.1.2.0.2 you need to create your own build.xml
I have found an example, it may be of some help. This does call a property file
cheers
James
<?xml version="1.0" ?>

<project name="ASB_EFT" default="main" basedir=".">

<property name="deploy" value="default" />

<property name="rev" value="1.0" />


<property file="ebusd.properties"/>
<property name="env" value="${env.name}"/>
<property name="current.project.name" value="${project.name}"/>
<property name="target.project.name" value="${project.name}_${env}"/>
<property name="deployment.profile" value ="${env}.properties"/>
<property name="source.development.directory" location="${basedir}"/>
<property name="target.env.directory" location="${basedir}/deploy/${project.name}_${env}"/>
<property file="${deployment.profile}"/>
<property name="build.fileencoding" value="UTF-8"/>

<target name="print.env" description="Display environment settings">
<echo message="Base Directory: ${basedir}"/>
<echo message="Deployment Profile: ${deployment.profile}"/>
<echo message="target.env.directory: ${target.env.directory}"/>
<echo message="Deploy to Domain: ${deployToDomain}"/>
<echo/>
<echo message="os.name: ${os.name}"/>
<echo message="os.version: ${os.version}"/>
<echo message="os.arch: ${os.arch}"/>
<echo/>
<echo message="java.home: ${java.home}"/>
<echo message="java.vm.name: ${java.vm.name}"/>
<echo message="java.vm.vendor: ${java.vm.vendor}"/>
<echo message="java.vm.version: ${java.vm.version}"/>
<echo message="java.class.path: ${java.class.path}"/>
<echo/>
<echo message="env: ${env}"/>
<echo message="current.project.name: ${current.project.name}"/>
<echo message="target.project.name: ${target.project.name}"/>
<echo message="server.name: ${server.name}"/>
</target>

<target name="create.environment">
<copy todir="${target.env.directory}">
<fileset dir="${basedir}"/>
<filterset begintoken="@" endtoken="@">
<filtersfile file="${deployment.profile}"/>
</filterset>
</copy>
<move file="${target.env.directory}/${current.project.name}.jpr" tofile="${target.env.directory}/${target.project.name}.jpr"/>
</target>
<target name="main">

<bpelc input="${basedir}/bpel.xml" rev="${rev}" deploy="${deploy}" />
</target>
</project>
here is a property file
project.name=ASB_EFT
env.name=ebusd
deployToDomain=default
server.name=[server]
server.port=7788
ebusd\:7788=http://[server]:7788/
IntegrationMailAccount=OracleBPELTest
IntegrationMailAddress=[email]
IntegrationMailPassword=[password]
archivedir=[directory]
inbounddir=/[directory]
errordir=[directory]
outbounddir=[directory]
bpelpw=bpel
dbhost1=[dbserver]
dbhost2=[dbserver]
dbport=1523
dbservice=bpel
dbconnstr=jdbc:oracle:thin:@(DESCRIPTION=(LOAD_BALANCE=YES)(FAILOVER=YES)(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=[server])(PORT=1523))(ADDRESS=(PROTOCOL=tcp)(HOST=[server])(PORT=1523)))(CONNECT_DATA=(SERVICE_NAME=ebusd)))

Communication between thread in the same process using file interface.

Hi,
I am developing driver and i need to communicate between two thread.
>can anyone guide me on implementing communication between two thread in the same process using File Interface. First thread will be driver and second will be application.I need to send IOCTL like commands using File interface ie is WriteFile(),ReadFile()
from Host process to driver through file-interface(which run's in driver context).Host process should not be blocked for the duration of the driver to process the command.
>File-interface will run in driver context and it will be responsible to receive command from application and pass it to the driver.
what are the complexity introduced?
>Can anyone also give me the link/reference to get more information on this topic?
>How to replace IOCTL command's for instance baud _rate change command with a file interface for example with IRP.

Here is the detailed query:
Hardware Abstraction Layer will interact with Driver(Both will be running in complete different process) .there is a IOCTL for command and File interface for read and write.
My requirement is:
Both should run in the same process so HAL will run as one thread and driver as another thread in the same process .I don't want HAL to wait for completion of request and also i don't want driver to be blocked .
We are planning to use a File Interface for communication between Hardware abstraction layer and Driver
HAL will send the command or read/write operation to a file interface and driver will get the command or read/write request from the File interface
There is a flexibility to change Hardware Abstraction layer and also the Driver
Is it possible to use IOCTL between two thread under same process? if not what other options do we have.
Can we use File interface to send command (like IOCTL) between two thread?

Why is the Star Transformation using two indexes for the same dimension?

Hi,
Recently, I have made an investigation about the Star Transformation feature. I have found a strange test case, which plays an important role in my strategy for our overall DWH architecture. Here it is:
The Strategy:
I would like to have the classical Star Transformation approach (single column Bitmap Indexes for each dimension foreign key column in the fact table), together with additional Bitmap Join Indexes for some of the dimension attributes, which would benefit from the materialization of the join (bitmap merge operation will be skipped/optimized).
The query:
select dp.brand, ds. region_name, dc.region_name
     , count(*), sum(f.extended_price)
from fact_line_item f
     , dim_part       dp
     , dim_supplier   ds
     , dim_customer   dc
where dp.mfgr        = 10                 -- dimension selectivity = 1/10 --> acttual/fact selectivity = 6/10
   and f.part_dk      = dp.dk
   and ds.region_name = 'REGION #1' -- dimension selectivity = 1/9
   and f.supplier_dk = ds.dk
   and dc.region_name = 'REGION #1' -- dimension selectivity = 1/11
   and f.customer_dk = dc.dk
group by dp.brand, ds. region_name, dc.region_name
The actual plan:
| Id | Operation                              | Name                        | Starts | E-Rows | Cost (%CPU)| A-Rows |   A-Time   | Buffers | Reads |
|   0 | SELECT STATEMENT                       |                             |      1 |        | 3247 (100)|      1 |00:01:42.05 |     264K|    220K|
|   1 | HASH GROUP BY                         |                             |      1 |      2 | 3247   (1)|      1 |00:01:42.05 |     264K|    220K|
|* 2 |   HASH JOIN                            |                             |      1 | 33242 | 3037   (1)|    217K|00:01:29.67 |     264K|    220K|
|* 3 |    TABLE ACCESS FULL                   | DIM_SUPPLIER                |      1 |   1112 |   102   (0)|   1112 |00:00:00.01 |     316 |      4 |
|* 4 |    HASH JOIN                           |                             |      1 | 33245 | 2934   (1)|    217K|00:01:29.10 |     264K|    220K|
|* 5 |     TABLE ACCESS FULL                  | DIM_CUSTOMER                |      1 |    910 |   102   (0)|    910 |00:00:00.08 |     316 |      8 |
|* 6 |     HASH JOIN                          |                             |      1 | 33248 | 2831   (1)|    217K|00:01:28.57 |     264K|    220K|
|* 7 |      TABLE ACCESS FULL                 | DIM_PART                    |      1 |     10 |     3   (0)|     10 |00:00:00.01 |       6 |      0 |
|   8 |      PARTITION RANGE ALL               |                             |      1 | 36211 | 2827   (1)|    217K|00:01:28.01 |     264K|    220K|
|   9 |       TABLE ACCESS BY LOCAL INDEX ROWID| FACT_LINE_ITEM              |      6 | 36211 | 2827   (1)|    217K|00:01:33.85 |     264K|    220K|
| 10 |        BITMAP CONVERSION TO ROWIDS     |                             |      6 |        |            |    217K|00:00:07.09 |   46980 |   3292 |
| 11 |         BITMAP AND                     |                             |      6 |        |            |     69 |00:00:08.33 |   46980 |   3292 |
| 12 |          BITMAP MERGE                  |                             |      6 |        |            |    193 |00:00:02.09 |    2408 |   1795 |
| 13 |           BITMAP KEY ITERATION         |                             |      6 |        |            |   4330 |00:00:04.66 |    2408 |   1795 |
| 14 |            BUFFER SORT                 |                             |      6 |        |            |     60 |00:00:00.01 |       6 |      0 |
|* 15 |             TABLE ACCESS FULL          | DIM_PART                    |      1 |     10 |     3   (0)|     10 |00:00:00.01 |       6 |      0 |
|* 16 |            BITMAP INDEX RANGE SCAN     | FACT_LI__P_PART_DIM_KEY_BIX |     60 |        |            |   4330 |00:00:02.11 |    2402 |   1795 |
|* 17 |          BITMAP INDEX SINGLE VALUE     | FACT_LI__P_PART_MFGR_BJX    |      6 |        |            |   1747 |00:00:06.65 |     890 |    888 |
| 18 |          BITMAP MERGE                  |                             |      6 |        |            |    169 |00:00:02.78 |   16695 |    237 |
| 19 |           BITMAP KEY ITERATION         |                             |      6 |        |            |   5460 |00:00:01.56 |   16695 |    237 |
| 20 |            BUFFER SORT                 |                             |      6 |        |            |   5460 |00:00:00.02 |     316 |      0 |
|* 21 |             TABLE ACCESS FULL          | DIM_CUSTOMER                |      1 |    910 |   102   (0)|    910 |00:00:00.01 |     316 |      0 |
|* 22 |            BITMAP INDEX RANGE SCAN     | FACT_LI__P_CUST_DIM_KEY_BIX |   5460 |        |            |   5460 |00:00:02.07 |   16379 |    237 |
| 23 |          BITMAP MERGE                  |                             |      6 |        |            |    170 |00:00:03.65 |   26987 |    372 |
| 24 |           BITMAP KEY ITERATION         |                             |      6 |        |            |   6672 |00:00:02.23 |   26987 |    372 |
| 25 |            BUFFER SORT                 |                             |      6 |        |            |   6672 |00:00:00.01 |     316 |      0 |
|* 26 |             TABLE ACCESS FULL          | DIM_SUPPLIER                |      1 |   1112 |   102   (0)|   1112 |00:00:00.01 |     316 |      0 |
|* 27 |            BITMAP INDEX RANGE SCAN     | FACT_LI__S_SUPP_DIM_KEY_BIX |   6672 |        |            |   6672 |00:00:02.74 |   26671 |    372 |
The Question:
Why is the Star Transformation using both indexes FACT_LI__P_PART_DIM_KEY_BIX and FACT_LI__P_PART_MFGR_BJX for the same dimension criteria (dp.mfgr = 10)?? The introduction of the additional Bitmap Join Index actually make Oracle to do the work twice !!!
Anybody, any idea ?!?

Dom, here it is the plan with the predicates:
| Id | Operation                              | Name                        | Starts | E-Rows | Cost (%CPU)| A-Rows |   A-Time   | Buffers | Reads |
|   0 | SELECT STATEMENT                       |                             |      1 |        | 3638 (100)|      1 |00:06:41.17 |     445K|    236K|
|   1 | HASH GROUP BY                         |                             |      1 |      2 | 3638   (1)|      1 |00:06:41.17 |     445K|    236K|
|* 2 |   HASH JOIN                            |                             |      1 | 33242 | 3429   (1)|    217K|00:08:18.02 |     445K|    236K|
|* 3 |    TABLE ACCESS FULL                   | DIM_SUPPLIER                |      1 |   1112 |   102   (0)|   1112 |00:00:00.03 |     319 |    313 |
|* 4 |    HASH JOIN                           |                             |      1 | 33245 | 3326   (1)|    217K|00:08:17.47 |     445K|    236K|
|* 5 |     TABLE ACCESS FULL                  | DIM_CUSTOMER                |      1 |    910 |   102   (0)|    910 |00:00:00.01 |     319 |    313 |
|* 6 |     HASH JOIN                          |                             |      1 | 33248 | 3223   (1)|    217K|00:08:16.63 |     445K|    236K|
|* 7 |      TABLE ACCESS FULL                 | DIM_PART                    |      1 |     10 |     3   (0)|     10 |00:00:00.01 |       6 |      0 |
|   8 |      PARTITION RANGE ALL               |                             |      1 | 36211 | 3219   (1)|    217K|00:08:16.30 |     445K|    236K|
|   9 |       TABLE ACCESS BY LOCAL INDEX ROWID| FACT_LINE_ITEM              |      6 | 36211 | 3219   (1)|    217K|00:08:40.89 |     445K|    236K|
| 10 |        BITMAP CONVERSION TO ROWIDS     |                             |      6 |        |            |    217K|00:00:32.00 |   46919 | 19331 |
| 11 |         BITMAP AND                     |                             |      6 |        |            |     69 |00:00:34.50 |   46919 | 19331 |
| 12 |          BITMAP MERGE                  |                             |      6 |        |            |    193 |00:00:00.58 |    2353 |      1 |
| 13 |           BITMAP KEY ITERATION         |                             |      6 |        |            |   4330 |00:00:00.10 |    2353 |      1 |
| 14 |            BUFFER SORT                 |                             |      6 |        |            |     60 |00:00:00.01 |       6 |      0 |
|* 15 |             TABLE ACCESS FULL          | DIM_PART                    |      1 |     10 |     3   (0)|     10 |00:00:00.01 |       6 |      0 |
|* 16 |            BITMAP INDEX RANGE SCAN     | FACT_LI__P_PART_DIM_KEY_BIX |     60 |        |            |   4330 |00:00:00.07 |    2347 |      1 |
|* 17 |          BITMAP INDEX SINGLE VALUE     | FACT_LI__P_PART_MFGR_BJX    |      6 |        |            |   1747 |00:01:23.64 |     882 |    565 |
| 18 |          BITMAP MERGE                  |                             |      6 |        |            |    169 |00:00:09.14 |   16697 |   7628 |
| 19 |           BITMAP KEY ITERATION         |                             |      6 |        |            |   5460 |00:00:02.19 |   16697 |   7628 |
| 20 |            BUFFER SORT                 |                             |      6 |        |            |   5460 |00:00:00.01 |     316 |      0 |
|* 21 |             TABLE ACCESS FULL          | DIM_CUSTOMER                |      1 |    910 |   102   (0)|    910 |00:00:00.01 |     316 |      0 |
|* 22 |            BITMAP INDEX RANGE SCAN     | FACT_LI__P_CUST_DIM_KEY_BIX |   5460 |        |            |   5460 |00:00:08.78 |   16381 |   7628 |
| 23 |          BITMAP MERGE                  |                             |      6 |        |            |    170 |00:00:21.46 |   26987 | 11137 |
| 24 |           BITMAP KEY ITERATION         |                             |      6 |        |            |   6672 |00:00:10.29 |   26987 | 11137 |
| 25 |            BUFFER SORT                 |                             |      6 |        |            |   6672 |00:00:00.01 |     316 |      0 |
|* 26 |             TABLE ACCESS FULL          | DIM_SUPPLIER                |      1 |   1112 |   102   (0)|   1112 |00:00:00.01 |     316 |      0 |
|* 27 |            BITMAP INDEX RANGE SCAN     | FACT_LI__S_SUPP_DIM_KEY_BIX |   6672 |        |            |   6672 |00:00:20.94 |   26671 | 11137 |
Predicate Information (identified by operation id):
   2 - access("F"."SUPPLIER_DK"="DS"."DK")
   3 - filter("DS"."REGION_NAME"='REGION #1')
   4 - access("F"."CUSTOMER_DK"="DC"."DK")
   5 - filter("DC"."REGION_NAME"='REGION #1')
   6 - access("F"."PART_DK"="DP"."DK")
   7 - filter("DP"."MFGR"=10)
15 - filter("DP"."MFGR"=10)
16 - access("F"."PART_DK"="DP"."DK")
17 - access("F"."SYS_NC00017$"=10)
21 - filter("DC"."REGION_NAME"='REGION #1')
22 - access("F"."CUSTOMER_DK"="DC"."DK")
26 - filter("DS"."REGION_NAME"='REGION #1')
27 - access("F"."SUPPLIER_DK"="DS"."DK")
Note
   - star transformation used for this statement

Why is the iPhone 5 using so much data I have read a lot of complaints and I have went over on my plan and never have?

Why is the iPhone 5 using so much data I have read a lot of complaints and I have went over on my plan and never have?
I have even turned off LTE. Cut off my cellular data off of apps. Still uses data I switched back to my iPhone 4 cause I had used my
Data in 2 weeks!

I have the same problem on my 4S 64G: I updated to 7.1.1 and burned through my cellular data allowance without running anything that ought to be using it. I incurred an overage charge on Thursday, my new billing cycle started on Friday, and I immediately had used 3/4 of my allowance for the new cycle. I typically do not use my allowance in an entire month so burning through it in a day or two twice in one week is very much not right.
Possibly unrelated or not: last night I was out, did NOT use any apps that should use cellular data, and came home and my phone refused to connect to my home wifi despite turning this and that on and off. I burned cellular allowance while wifi was available.
It seems like someting on my phone, whether an app or the iOS itself, is using cellular data even while my phone is not in use. All I could do is turn off Cellular Data in Settings but that very much diminishes the usefulness of a phone that has served me well -- without data overages! -- for several years.
Please fix this, Apple!

Why does the Java API use int instead of short or byte?

Why does the Java API use int if short or even byte would be sufficient?
Example: The DAY_OF_WEEK field in Calendar uses int.

One of the point is, on the benchmark tests on Java performance, int does far better than short and byte data types.
Please follow the below blog talks about the same.
Java Primative Speed
-K

HT5622 why does the wrong apple id come up on my iphone when I try to use apple app store? how do I change it to the correct apple id?

Why does the wrong apple id come up on my iphone when i try to use apple app store? How do I change it to the correct apple id?

Settings > iTunes and App Store > Apple ID = Sign Out... Then Sign In using the preferred Apple ID.
It should be Noted that anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID

Why does the snmpcoll process always start up even if SNMP Statistics Collection is turned off?

Why does the snmpcoll process always start up even if SNMP
Statistics Collection is turned off?
<P>
The SNMP Statistics Collection field on the Server Status|SNMP
Subagent Configuration form affects only the SNMP subagent, which is a separate entity from
the collector process (snmpcoll). Currently, snmpcoll does not look
at the SNMP configuration data when it starts up. It is started by
the dispatcher and terminates when the dispatcher terminates. Many
of the statistics are supposed to reflect cumulative values recorded since MTA
initialization, such as the total number of messages sent and received.
As a convenience, the collector process collects information in the
background even while the SNMP subagent is turned off; this way,
the values are available when the SNMP subagent is configured and
turned on.

Collections fall off on the Date of First Deliquency 7-7.5 years later; that is supposed to be reported as the first time you went late (1-30 days) on the OC (original creditor) in the chain of events leading up to it's being farmed out for collection as I underestand it. DOFD though sometimes doesn't get reported right, and by default it will be the date the collection is added to the bureaus. As an example I have an awkward collection (not sure how I got it looking at the payment history thought I'd cancelled that account but TWC billing apparently didn't think so) which I went late on in 2009, but didn't get farmed out till late 2010. The DOFD is 6/09 looking at it, and it's expected to come off according to the bureaus 6/16 as a result. Different negatives have their own rules though.

Why remove the single most used item, the addons bar?

Why does their v29 change log says "added options", when the only thing most of us see are removed options, including the single most used section: the addon bar? I do not want to install an addon to see the addon bar that has been present since pre-Firefox Mozilla days. So why remove the single most used item? Did the previous pro-life CEO like it too much and the new management cannot have that?? Seems like Firefox is going backwards, not forwards.

With 20 years in tech support and working on thousands of user end computers, the number 1 area used by people both in offices and in their personal computers was the add on bar. Considering the sheer number of addons that make use of it (just a preliminary dig through the addons earlier today), I would say in excess of 75% of legitimate addons make use of it. By removing it, it essentially nullifies hundreds of thousands of man hours put into programming all those addons.
Why require an addon just to be able to make use of other addons? Sounds like a VERY flawed study to me, or there was no study and it's just Mozilla big wigs deciding to change what they want, spitting in the face of the open source/common community licensing.

Speedup the import process using imp tool

hi,
how many ways to speedup the import process using imp tool in oracle 9.2.0.8

Hi,
Follow below guidelines also:
IMPORT(imp):
Create an indexfile so that you can create indexes AFTER you have imported data. Do this by setting INDEXFILE to a filename and then import. No data will be imported but a file containing index definitions will be created. You must edit this file afterwards and supply the passwords for the schemas on all CONNECT statements.
Place the file to be imported on a separate physical disk from the oracle data files.
Increase DB_CACHE_SIZE (DB_BLOCK_BUFFERS prior to 9i) considerably in the init$SID.ora file
Set the LOG_BUFFER to a big value and restart oracle.
Stop redo log archiving if it is running (ALTER DATABASE NOARCHIVELOG;)
Create a BIG tablespace with a BIG rollback segment inside. Set all other rollback segments offline (except the SYSTEM rollback segment of course). The rollback segment must be as big as your biggest table (I think?)
Use COMMIT=N in the import parameter file if you can afford it
Use STATISTICS=NONE in the import parameter file to avoid time consuming to import the statistics
Remember to run the indexfile previously created.
Note: Before following the above guideliness check your requirement aso.
Best regards,
Rafi.
http://rafioracledba.blogspot.com/

I am trying to upgrade EPM 8.9(8.49.23) to EPM 9.1 (8.53.08). During dataconversion step the AE process finished succssfully in few seconds. When i see the log it says "There are no conversions to run for upgrade path PF89 (18028,10003)". Please let me kn

I am trying to upgrade EPM 8.9(8.49.23) to EPM 9.1 (8.53.08). During dataconversion step the AE process finished succssfully in few seconds. When i see the log it says "There are no conversions to run for upgrade path PF89 (18028,10003)". Please let me know why it didnt do any conversion. Am i missing something?

yes, that app engine didnt inserted any rows. So now when i tried to drill down i found that there was no data in the "new demo" database on table UPG_DATACONV. That is the reason for all this.
When i applied required for upgrade patch in demo it said couple of patch already exists so those update i skipped. Now when i check upd877654 has a step which imports the data in this table. my change assistant told that the update is already available in my demo so i skipped. Now i am not sure what to do.
I tried reimporting the data and running the analyzer again. But worried that there can be any issues due to this.

Can i make a book in iPhoto without using any of the built in layout templates, which are too limiting when i have already cropped my pictures to show just what I want. Ideally I just want to drag and drop and arrange and size the pictures myself

Can i make a book in iPhoto without using any of the built in layout templates, which are too limiting when i have already cropped my pictures to show just what I want. Ideally I just want to drag and drop and arrange and size the pictures myself

If you have Pages you can create customs pages for your book as TD suggested. If you have Pages from iWork 09 or 11 this app will add 80 or so additional frames to those offered: Frames and Strokes Installer. Don't use it on the latest Pages version, however.
This tutorial shows how to create a custom page with the theme's background: iP11 - Creating a Custom Page, with the Theme's Background for an iPhoto Book. Once the page is complete to get it into iPhoto as a jpeg file follow these steps:
Here's how to get any file into iPhoto as a jpeg file:
1 - open the file in any application that will open it.
2 - type Command+P to start the print process.
3 - click on the PDF button and select "Save PDF to iPhoto".
NOTE: If you don't have any of those options go to Toad's Cellar and download these two files:
Save PDF to iPhoto 200 DPI.workflow.zip
Save PDF to iPhoto 300 DPI.workflow.zip
Unzip the files and place in the HD/Library/PDF Services folder and reboot.
4 - select either of the files above (300 dip is used for photos to be included in a book that will be ordered).
5 - in the window that comes up enter an album name or select an existing album and hit the Continue button.
That will create a 200 or 300 dpi jpeg file of the item being printed and import it into iPhoto. For books to be printed choose 300 dpi.

Why is the fontd process using up to 80% of CPU when I have InDesign CS6 open?

Similar Messages

Maybe you are looking for