Will start to dba installation on exadata machine. Need guideance/information

Hi, THe company I worked for over 10 years finally decided to purchase a exadata machine.
Can anybody point to me where I can start to build oracle databases on exadata machine?
Thanks in advance.

Hello user301176,
Your Exadata purchase includes hardware and software installation services, so as part of the delivery the machine will get set up in your data center, software installed, and an initial database created. Your work as a DBA will normally tend toward ordinary platform migration work: data transfer, testing, performance, compression, DR plans, etc.
I presented on this topic at the last Oracle OpenWorld, and slides are available at OOW13: Accelerate your Exadata deployment with the DBA skills you a... in case you're interested. I believe both Arup Nanda and Rich Niemec has introductory-level Exadata presentations that they present regularly at Oracle conferences. When looking at specific features or tasks, The Oracle team has a good collection of whitepapers as well: http://www.oracle.com/technetwork/database/exadata/
Hope this helps!
Marc

Similar Messages

Oracle Client 32 bit installation on Exadata Machine

Hi,
We are starting our migration to exadata next month.
One of the issues we have is regarding to our Informatica ETL tool . Our application is licence to 32 bit.
The database repository of this tool is currently running on linux redhat 5.5 64 bit with 11203 rdbms version.
We had to install oracle client 32 bit software , in order to allow the application to connect to the database.
Is it possible to install oracle client 32 bit on exdata ? If not what would you suggest ?
Best Regards

I can't speak for Informatica, but it should be able to connect to the database over the network, so the database server OS wouldn't matter in that case. That is, if Informatica runs on a different Linux machine that runs 32-bit Linux, it can connect over the network to the Exadata database server node. If Informatica requires to run on the database server directly, you'd have to ask them how they can support 64-bit Linux (or you may have to modify or add to your license).

"The computer started using Windows installation media." Installing windows 10 technical preview on virtual machine

The computer started using Windows installation media. Remove the installation media and restart your computer so that Windows starts normally. The, insert the installation media and restart the upgrade. (Do not
select |custom[advanced]| to perform an upgrade. |custom[advanced]| installs a new copy of Windows and deletes your programs and settings.)
That is the Compatibility report that I'm getting when trying to install onto parallels 10 Version 10.2.0 (28956) on my mid 2009 Macbook 13. This happens just after I click 'Install now' and accept the T&Cs.
I am selecting 'Upgrade: Install Windows and keep files, setting and applications'.
I am upgrading from the Windows Technical Preview Evaluation Copy. Build 9879.
I have updated my EFI and tried a few restarts and am booting from a CD. No luck yet.
Any help would be muchos appreciated.

Hi bitofagiggle,
I am not familiar with mac machines, based on what I know, there should be more settigns that need to be configured before the installation of Windows, I suggest you contact the manufacturer for further help regarding how to make Windows to upgrade smoothly.
The below is some articles for reference:
Install
Windows 8.1 on a Mac
Your Manufacturer website:
How to install Windows using Boot Camp
Please note: Since this website is not hosted by Microsoft, the information may change without notice. Microsoft does not guarantee the accuracy of this information.
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How do I perform a "Suite Product Activation" so that Acrobat will start working on my new Retina MacBook Pro?

How do I perform a "Suite Product Activation" so that Acrobat will start working on my new Retina MacBook Pro?
Like others, I have recently upgraded my MacBook Pro to the next generation and migrated all my information from old to new. Everything works seamlessly EXCEPT Acrobat. Photoshop, Indesign, Bridge and Lightroom all seem functional. Acrobat hangs with an error message "Suite Product Activation Needed. Acrobat was installed as part of a suite. To enable Acrobat, please start another element of the suite (such as Photoshop)." Needless to say, starting another element of the suite has NO impact on Acrobat.
This has to be a common problem. Now that Apple has made it really easy to migrate information from old to new machines, it has to come up all the time. What surprises me greatly is that I can't find any coherent answer in these forums.
So how do I get Acrobat running again?

Hi Anubha,
I do not understand what you said below.
I am running Adobe Acrobat Pro Version 9.5.5. I do not remember whether it came with Photoshop or InDesign.
When I open Photoshop, it opens without my having to follow any instructions to activate the software. As a matter of fact, I cannot find my Photoshop serial number anywhere in the Photoshop program itself. I do know it from my profile at Adobe.com. Are you suggesting I deactivate Photoshop on the new computer and then reactivate it using my serial number? Will it reactivate?
When you say
"/Library/Application Support/Adobe" at the root level of the startup disk (not the Library folder inside a user's Home folder)
what do you mean? I do not have a startup disk. I have the original installation disk but that version of Photoshop has been updated a few times.
After staring at your instructions for a while, I realized that you might be talking about the Library/Application Support folders resident on my Macintosh HD, although why you called it a startup disk is unclear to me. IAC, I went into those folders and duly moved the three folders into a new folder I called “Acrob1” and restarted Adobe Acrobat 9 and got the following error message: “AMT Subsystem Failure The licensing subsystem has failed catastrophically. You must reinstall of call customer support.” with a small (6).
By undoing my actions I am back to the staus quo ante.
Now what?
Regards, Robert

Can't Zap the P-RAM , Can't start from an installer disk with the C-Key...

Can't Zap the P-RAM , Can't start from an installer disk with the C-Key... or The D-Key for Apple Hardware test or run with the shift Key in Safe Mode!!!
About a week ago I started to have problems with the Mac after 10.5.6! First the Mac after shut down would restart on its own in 10 to 15 minutes. I read in various forums about some of the 10.5.6 problems. I did a clean reinstall where the Mac created a previous system folder. After this suddenly mail, I-Chat as well as some other programs would open, then close immediately! Since I did not have things backed up because I didn't have a large drive, I dragged my files and apps to another drive and reformatted the drive zeroing out all data and did a fresh new install then brought in the combo 10.5.6 update.The Mac is running correctly but I can't Zap the P-Ram, startup from the Mac OS X installer Dvd with the C key or run Apple Hardware Test with the D key or boot in safe mode with the shift key. I can boot any of the Bootable disks from the start-up Disk in Preferences.
I went over this with Apple and they suggested I run the Apple Hardware test. It won't run on this machine because I can't boot it with the D- Key. I ran tech Tools and every single thing checks out OK! This Mac has worked great since I got it in I believe Feb or March of 2007.

Make sure that you don't have firmware password protection enabled. It will prevent some boot key shortcuts from working, like clearing NVRAM, etc. You can disable firmware password protection by booting off the OSX DVD and loading the utility.

Can customers rebuild an Exadata machine with the latest stack versions?

There’s a possibility that we’ll be purchase two new Exadata machines (X3) in the near future. I'd be getting very excited if I wasn't already entirely swamped :)
If it happens, we’ll be asking Oracle to install the latest and greatest of the software stack when they arrive on-site with our new toys. Currently, this means:
OEL: 5.7 (with latest kernel)
ESS: 11.2.3.2.1 (write-back FC, mmmmm!)
RDBMS/GI: 11.2.0.3.17
Our current Production database is on a V2 machine and has the following versions of the stack:
OEL 5.5
ESS 11.2.2.3.2
RDBMS/GI 11.2.0.2 BP7
We are hoping, once the dust settles, that we can re-purpose our existing V2 machine as a Development environment. However, in order for that to be of any use, we need the software stack to match what will be running in Production on the X3s.
As far as I understand, the upgrade path is as follows (as per 888828.1)
Upgrade the O/S to OEL 5.7 and the latest kernel on storage cells and comp nodes
Upgrade the firmware on the IB switch to 1.3.3-2 (which we already have)
Upgrade the Exadata Storage Server on the storage cells and comp nodes to 11.2.3.2.1
Install the 11.2.0.3.17 GI and RDBMS binaries
Upgrade ASM from 11.2.0.2 to 11.2.0.3.17
Install the 11.2.0.3.17 RDBMS binaries
Make/move/restore/copy Development onto the newly-upgraded V2 machine.
I’m wondering whether it’s better for us to upgrade the V2 machine from our current versions of the stack to the latest or whether it’s better to attempt a rebuild?
As a customer, are we able to rebuild the stack ourselves with the new software or do we have to have Oracle come in and go through their installation process (we are putting a different version of the stack on than we presently have)?
Mark

frits hoogland wrote:
I don't understand the answers.
A V2 Exadata system (and up, X2, X3) is full supported up to the newest Exadata software releases, so you just can upgrade. Of course you need to check with MOS 888828.1 what path to take (not all software might be upgradable to the latest release in one go). Need need to puzzle, just upgrade.I'm fairly sure that we would be able to upgrade - in fact, when we weren't entertaining a hardware upgrade earlier in the year, I had planned out a upgrade path from our current versions to what was the current stack before the FlashCache became write-able.
We didn't have much of a choice at this point because the V2 was planned to be our Production environment for the foreseeable. Our upgrade was possible, but would have been relatively cumbersome as we would have had to upgrade the O/S, the ESS on cells/nodes, the GI and then the RDBMS in chunks to satisfy the various pre-requisites.
My question was whether it was possible/better/cleaner to simply rebuild the whole box with the latest software stack instead of upgrading now that the V2 environment is likely to be designated for Development if we get the new hardware and there isn't the associated pressure of it being a Production box.
>
If you want to change the space ratio between DATA and RECO, the easy path is to delete all the databases, remove the data and reco diskgroups, remove the grid disks on the cells, and create them again, and create the diskgroups on top of it. This also can be done online by dropping the griddisks per cell/storage server in ASM, recreating them with different sizes, and get them in ASM again.I believe that Tycho said he had to choose between upgrading the stack AND change the space ratio between his diskgroups OR just rebuild the system from scratch: and he chose to rebuild.

Need help trouble shooting on how to fix my MacBook Pro so it will start

Ok, this is going to be a bit of a long one, cuz there are a good amount of details that go into the problem and how I have tried to fix it.
To start, late last summer I got my Macbook Pro 15" with high resolution anti-glare, 500 GB X 7200 RPM hard drive, and everythin else standard.
Next part of the story is that i decided to upgrade from my 3-year-old iPhone 3GS. So I preordered an iPhone 5 (never doing that again), and finally received it 10/05/12.
Wanting to synch my new iPhone 5 ASAP so I could fully play with it, I finally synched my old iPhone 3GS with my MacBook Pro for the first time. I had not previously synched it with my MacBook Pro, because all of the songs and stuff that were on it were from being synched with my family's desktop (from maybe a year or so ago; I don't synch my phones often.). I also had been lazy this whole time in not transferring the songs and stuff from the desktop to my MacBook Pro, so thats why I didn't synch my 3GS, because I didn't want to lose that stuff on my phone until I had made time to transfer the data. Because of this, I didn't use iTunes that much and I updated it only 2 or 3 times over the year that I had if before I got my iPhone 5.
After synching my old phone, I then tried synching the i5, but an iTunes pop up said that I needed to update to iTunes 7.0 in order to synch the new phone.
So I canceled the pop-up, and checked the updates in iTunes, and selected update (I can't remember what it said I was updating to, but I don't think it was 7.0).
After it started updating, it asked if I wanted to update something something else (I think it was an iOS update or something thing like that.).
I select update, because it looks legit, and why not update the whole computer when I'm taking the time to update iTunes? So the 15-20 minute installation estimation time turns into 2 hours (I think that it said that there was 2GB of update, but not sure.).
At that time, I think of how I don't remember if the update was 7.0 or not (maybe 6.9 or something like that was my thought.). So I tried to re-synched my i5 to make the pop up for iTunes 7.0 to come up. It came up, and I clicked the link to take me to Apple's site. I clicked the update to iTunes 7.0, and it started downloading from the internet, and it gave some download estimation time. Remember that the other iTunes and iOS thing was still updating while iTunes 7.0 was downloading. The problem was that I had to go to work a few minutes before the download of the iTunes 7.0 from Apple's site would complete and 1.5 hours before the other updates would finish. So I just left my MacBook Pro open, running, and updating/downloading.
After work, I checked my laptop, and it said something about finalizing the installation. So I hit that button to finalize or whatever it said, and it starts finalizing.
After waiting 10 or so minutes I check my MacBook Pro again, and it says that it needs to restart to complete the process. So I hit the restart button on the pop up.
It restarted, and against a blue screen there was a grey pop up that said that there was some error or something like that in the installation and that I needed to restart the computer again. There was only one button on the pop up, and it was the "Restart" button. So I pressed it, and it restarted again.
However, it didn't fully boot up (and to this day still doesn't) and get past the grey screen with the apple and the spinning gear thingy underneath it.
After like 20 minutes, I did a forced shut off, and rebooted while holding the option button to see if I could start my Windows side, since I have my computer bootcamped, though I haven't used Windows on it yet. The three options appeared: Windows something, Macintosh something, and Recovery HD. I clicked the Windows button, and after loading and stuff, Windows was running and working. So I'm pretty sure that my problem isn't a hardware problem, but a software problem.
So I asked a friend who is studying to be some kind of computer guy, and he suggested that I put in the Mac iOS X disk that I got with my MacBook Pro when I start up and try to get to Disk Utility. I did that, and was able to get to Disk Utility. And as he instructed, I (on the First Aid tab, I think) pressed "Verify Disk". He said that it started to look for problems and stuff. Then when it was done, I pressed the "Repair Disk", and he said it started fixing those problems. After it was done, I performed another forced shut off. I then turned my MacBook Pro on with crossed fingers, but it was still stuck on the gray screen with the apple and the gear.
He then suggested that we try to start it in Safe Mode, so we researched how to do it on my family's desktop. I tried holding Shift after the turn on tone and releasing it when the spinning gear appeared, but that didn't work. I'm still not sure if that's the right way to start in safe mode.
So right now I don't have any other ideas, besides spending money to get it fixed, which I don't want to do, cuz I'm not rich and I work hard for all these fancy toys.
It ***** to have the joy of getting the newest iPhone overshadowed by my MacBook Pro not working.
Someone, please help!!!

First off your older OS X boot disks are no good as you upgraded OS X to a later version.
When you held the option key down at boot, this entered Startup Manager and by what your describing you have Recovery HD, Macintosh HD (your OS X boot partition), and Windows BootCamp partition.
To repair the drive, you enter Recovery HD and use Disk Utiltiy there to repair the Macintish HD partition.
You also use Recovery HD to reinstall OS X 10.7 or 10.8 from Apple's servers, this should fix your problems without deleting your programs or files. (some third party with at boot kernel extension ones will have to be reinstalled)
All you need to know is here
Step by Step to fix your Mac
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

When I click on Firefox it opens with a box that says "Foxfire is installing your updates and will start in a few moments-. " then it says "Software Update Failed (in blue) with an exclamation mark inside a yellow triangle) The update could not be install

When I click on Firefox the first time it says "Foxfire is installing your updates and will start in a few moments…. (with a green bar)" then it says "Software Update Failed (in blue) with an exclamation mark inside a yellow triangle)
The update could not be installed. Please make sure there are no other copies of Firefox running on your computer, and then restart Firefox to try again." When I click the ok, Firefox opens up. If I open another Firefox window with the previous one still running, it doesn't give me any of these messages, it just opens normally.
== This happened ==
Every time Firefox opened

If you can't install on top of the current installation then you need to delete or rename the current Firefox program folder to do a clean install.
It is possible that your security software is using or locking files, so you can try to temporarily disable that software during the installation.

Want to install Windows 7 to my Mac with Boot Camp, but my laptop's monitor is broken. How could I start the Windows installation through an HDMI video source?

Hi everyone,
I'm trying to start a bootcamp installation of Windows 7 though an external monitor using HDMI. Is there anyway to have the installation screen show up on the external monitor? I get stuck at the beginning of the installation due to not being able to use my laptop's primary screen.
Thanks for the help!

Kapil Choubisa wrote:
when I try complete step 2, it always says "The Installer dick could not be found".
Unless you have a 2010 Mini Server model, your Mini has a built-in Optical drive (Mac mini (Mid 2010) - Technical Specifications).
Can you read the Windows Installer media when booted on OSX? Your DVD media may be corrupt.
If your Optical Drive is functional AND the Windows DVD is readable in OSX Finder, then your installer should work. You will need a USB2 for BC drivers as well.

I have an iMac that I am running OSX 10.8.3 on. I keep trying to install 10.8.4 but it will not install. I tried updating and installing several times and it restarts the computer but it will not install the software. My machine is about 8 months old.

I have an iMac that I am running OSX 10.8.3 on. I keep trying to install 10.8.4 but it will not install. I tried updating and installing several times and it restarts the computer but it will not install the software. My machine is about 8 months old so, it's in the newish range. HELP!

Sometimes the App Store version doesn't work correctly. In this case, install 10.8.4 with the Combo version > http://support.apple.com/kb/DL1659?viewlocale=en_US&locale=en_US
The Combo installer is the safest way to update OS X, and it allows you to update more than one computer with a single download

Why does my iMac display go off when I am starting up or waking up my machine from sleep..

Why does my iMac display go off when I am starting up or waking up my machine from sleep..?
When my iMac goes to sleep I then later try to click the magic track pad or keyboard and it will usually then show the initial password entry login screen and then go off. The machine is still on but the display is black and will sometimes flash up the screen again if I press the magic track pad or keyboard but will then black out again..

Well, there are many different reasons why it does this. It might shut off due to power voltage problems, system overheats, or there is a System Problem. The reason it might be hard to boot up is because your power button might not work properly or your system hard drive is damaged.
<Email Edited by Host>

How to stop - com.apple.launcd: Throttling respawn Will start in 10 seconds ?

I am running OS X Mavericks 10.9.5 on MacBook Pro Late 2013 with Retina display.
I had installed then removed an application KUsrTSK.app (Kaseya). I noticed this week in Console following process repeatedly running:
com.apple.launchd: (com.kaseya.AgentMon) Throttling respawn: Will start in 10 seconds
I have tried to look for this command in /Library/LaunchAgents and did not find it.
Someone suggested to run following command in Terminal:
launchd remove com.kaseya.AgentMon
but no such process was found.
At a suggestion I have downloaded and run EtreCheck.app and have put the detailed results below hoping that it would be helpful for someone to suggest a course of action.
EtreCheck version: 1.9.15 (52)
Report generated September 26, 2014 at 5:26:13 PM EDT
Hardware Information: ?
MacBook Pro (Retina, 13-inch, Late 2013) (Verified)
MacBook Pro - model: MacBookPro11,1
1 2.6 GHz Intel Core i5 CPU: 2 cores
16 GB RAM
Video Information: ?
Intel Iris - VRAM: (null)
Cinema HD 2048 x 1280
System Software: ?
OS X 10.9.5 (13F34) - Uptime: 0 days 1:57:53
Disk Information: ?
ST2000DM001-9YN164 disk0 : (2 TB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
2big-2TB-One (disk0s2) /Volumes/2big-2TB-One: 2 TB (1.2 TB free)
ST2000DM001-9YN164 disk2 : (2 TB)
S.M.A.R.T. Status: Verified
EFI (disk2s1) <not mounted>: 209.7 MB
2big-2TB-Two (disk2s2) /Volumes/2big-2TB-Two: 2 TB (2 TB free)
APPLE SSD SM1024F disk1 : (1 TB)
S.M.A.R.T. Status: Verified
EFI (disk1s1) <not mounted>: 209.7 MB
Macintosh HD (disk1s2) / [Startup]: 999.7 GB (614.68 GB free)
Recovery HD (disk1s3) <not mounted>: 650 MB
USB Information: ?
Apple Internal Memory Card Reader
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple USB Ethernet Adapter
Logitech USB Receiver
No brand Combo Free KVM
Thunderbolt Information: ?
Apple Inc. thunderbolt_bus
Apple Inc. Thunderbolt to Gigabit Ethernet Adapter
LaCie 2big
Gatekeeper: ?
Mac App Store
Kernel Extensions: ?
[loaded] com.Logitech.Control Center.HID Driver (3.5.1 - SDK 10.0) Support
[loaded] com.Logitech.Unifying.HID Driver (1.2.0 - SDK 10.0) Support
[not loaded] com.equinux.VPNTracker (5.1.2) Support
[not loaded] com.equinux.VPNTracker6 (6.9.2 - SDK 10.4) Support
[not loaded] com.equinux.VPNTracker7 (7.0.0 - SDK 10.8) Support
[loaded] com.logmein.driver.LogMeInSoundDriver (1.0.3 - SDK 10.5) Support
[not loaded] com.microsoft.VirtualPC.Networking.1040 (7.0.2) Support
[not loaded] com.seagate.driver.PowSecDriverCore (5.0.1) Support
[not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.0.1) Support
[not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.0.1) Support
[not loaded] com.seagate.driver.SeagateDriveIcons (5.0.1) Support
Startup Items: ?
AgentMon: Path: /Library/StartupItems/AgentMon
HP IO: Path: /Library/StartupItems/HP IO
Virex: Path: /Library/StartupItems/Virex
VNCServer: Path: /Library/StartupItems/VNCServer
VShieldEPOInterface: Path: /Library/StartupItems/VShieldEPOInterface
Problem System Launch Agents: ?
[loaded] com.paragon.NTFS.auth.plist Support
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[running] com.collobos.fingerprintd.plist Support
[loaded] com.equinux.VPNTracker6.agent.plist Support
[loaded] com.equinux.VPNTracker7.agent.plist Support
[running] com.intego.BackupAssistant.daemon.plist Support
[loaded] com.kaseya.agentmon.plist Support
[not loaded] com.logmein.logmeinblanker.plist Support
[running] com.logmein.logmeinserver.plist Support
[loaded] com.logmein.raupdate.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[loaded] com.skype.skypeinstaller.plist Support
[running] com.trusteer.rooks.rooksd.plist Support
Launch Agents: ?
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.intego.backupassistant.agent.plist Support
[loaded] com.kaseya.update.plist Support
[running] com.Logitech.Control Center.Daemon.plist Support
[failed] com.logmein.LMILaunchAgentFixer.plist Support
[running] com.logmein.logmeingui.plist Support
[running] com.logmein.logmeinguiagent.plist Support
[not loaded] com.logmein.logmeinguiagentatlogin.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[not loaded] com.realvnc.VNCServerd.plist Support
[loaded] com.realvnc.VNCServersd.plist Support
[running] com.seagate.SeagateStorageGauge.plist Support
[running] com.trusteer.rapport.rapportd.plist Support
User Launch Agents: ?
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.adobe.ARM.[...].plist Support
[failed] com.apple.MobileMeSyncClientAgent.plist
[running] com.c-command.SpamSieve.LaunchAgent.plist Support
[loaded] com.google.keystone.agent.plist Support
[running] com.memeo.Memeod.plist Support
[not loaded] jp.co.canon.Inkjet_Extended_Survey_Agent.plist Support
[loaded] uk.co.markallan.clamxav.freshclam.plist Support
User Login Items: ?
System Events
AirPort Base Station Agent
Backup Engine 3
iTunesHelper
VMware Fusion Helper
VMware Fusion Start Menu
AdobeResourceSynchronizer
Canon IJ Network Scanner Selector2
AdobeResourceSynchronizer
ClamXavSentry
Dropbox
Internet Plug-ins: ?
Google Earth Web Plug-in: Version: 6.0 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 2.4.4.2 Support
OfficeLiveBrowserPlugin: Version: 12.3.6 Support
RealPlayer Plugin: Version: (null) Support
AdobeAAMDetect: Version: AdobeAAMDetect 1.0.0.0 - SDK 10.6 Support
FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
Flash Player: Version: 15.0.0.152 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0
QuickTime Plugin: Version: 7.7.3
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
GarminGpsControl: Version: 2.9.1.0 Release Support
EPPEX Plugin: Version: 3.0.5.0 Support
JavaAppletPlugin: Version: Java 7 Update 67 Check version
Safari Extensions: ?
AdBlock
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins ?
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 Support
Google Earth Web Plug-in: Version: 7.1 Support
3rd Party Preference Panes: ?
RCDefaultApp
Flash Player Support
Flip4Mac WMV Support
FUSE for OS X (OSXFUSE) Support
Growl Support
Java Support
Logitech Control Center Support
Paragon NTFS for Mac ® OS X Support
Trusteer Endpoint Protection Support
Time Machine: ?
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 931.04 GB Disk used: 358.58 GB
Destinations:
2big-2TB-One [Local] (Last used)
Total size: 2 TB
Total number of backups: 65
Oldest backup: 2013-08-19 14:51:47 +0000
Last backup: 2014-09-26 20:40:21 +0000
Size of backup disk: Adequate
Backup size 2 TB > (Disk used 358.58 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU: ?
 9% ksfetch
 2% WindowServer
 2% GoogleSoftwareUpdateAgent
 2% Activity Monitor
 1% fontd
Top Processes by Memory: ?
475 MB mds_stores
344 MB Mail
279 MB clamd
180 MB com.apple.IconServicesAgent
147 MB Contacts
Virtual Memory Information: ?
9.02 GB Free RAM
4.68 GB Active RAM
974 MB Inactive RAM
1.36 GB Wired RAM
762 MB Page-ins
0 B Page-outs

As shown in the output of EtreCheck, that startup item is here:
Startup Items: ?
AgentMon: Path: /Library/StartupItems/AgentMon

How can i get my imac proceed to home page from restarting endlessly? it will start then start booting then chime then bck to step one, not even hitting the start up page.... plssss help!

how can i get my imac proceed to home page from restarting endlessly? it will start then start booting then chime then bck to step one, not even hitting the start up page.... plssss help!

Hi
My Powerbook was the same. Only fix is to reinstall OSX from the install CD but be sure not to pick the Format and install clean. Once you boot with the install CD pick the preserve user data and settings.
On My machine the reinstall looked perfect. My network, email, files and all the programmes were all there. Most apps worked fine but Adobe CS2, Virtual PC and NetBarrier all needed reinastallation as they reported a few files or registration was missing. I went for the 10.4.3 upgrade again and it worked fine.
Good luck
D

Firefox will NOT start, deleting and reinstalling will start as last step but once Firefox is closed it will NOT restart.

Both browsers (Firefox 21 & IE) installed on my 64-bit Widows XP desktop refuse to start either from clicking the desktop icon, the start bar menu, or the executables themselves. What does happen is that all icons disappear from the screen for some 15-30 seconds, then the icons are returned to the screen, and the last informative message displayed from the system tray at start up is repeated.
Deleting Firefox and reinstalling will start the browser as the last step, but when the new copy is closed it will not start. Also just rerunning the installation download without deleting Firefox will "Upgrade" and start as a last step but when the new copy is closed it can not be restarted. Running restore on the new copy has on apparent effect on the ultimate inability to restart after closing.
I only tried the IE browser after being unable to start Firefox (its ordinarily only used by the MS update procedure) and have not investigated either reinstalling or repairing it.

Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

Start Lync 2010 client on remote machine

I have a couple of users who like to logout of their Lync 2010 client. They apparently think that they are being watched through this program. This is a bit of a hassle since we use this program to see if users are sitting at their desk.
I am trying to write a .bat file to automatically kill the communicator process and then restart the program on the remote machine. I am having nothing but success with killing the communicator process using pskill. When attempting to start the
client using psexec, however, it will not work.
It will start a new communicator.exe process on the remote computer just fine. It doesn't seem to actually start the program though. There is no icon in the taskbar showing the program is running and communication with the user does not work
as it still shows them offline.
On the local machine (the one I am running from), I just use a bat file that calls another .bat file on the remote machine. The .bat file on the remote machine kills all communicator.exe processes using pskill -t. It then attempts to start a
new communicator session using "start communicator /fromrunkey" This will start a new communicator.exe process on the remote computer without any problems. That's all it will do though.
Anybody have any suggestions on what I can do to make it actually launch the client on the remote computer? I have exhausted all options I can come up with. I would like to get this working so the users in question finally figure out that if
they logout of Lync it is going to just start back up on them. Hopefully after time they will catch on and stop logging out of the program.

Have we tried giving the complete location of the communicator.exe
"start c:/.../communicator.exe /fromrunkey
Using the same script are you able to open Notepad.exe on the remote machine just for testing
for more info look at http://blogs.technet.com/b/rischwen/archive/2013/06/20/lync-2013-client-auto-start-registry-key.aspx
Please remember, if you see a post that helped you please click ;Vote As Helpful" and if it answered your question please click "Mark As Answer" Regards Edwin Anthony Joseph

Will start to dba installation on exadata machine. Need guideance/information

Similar Messages

Maybe you are looking for