Will the earphones and usb cable be included in the box if i buy an ipod shuffle online?
i want to buy an ipod shuffle online, and so when i went to the compare section, it said that the earphones, usb cable and the ipod itself would be included in the box. however, when i went to the store and cart section, they suggested that i buy both the earphones and usb cable? are they included in the rm169 price tag? if not, are they necessary for the ipod shuffle? thanks in advance to anyone who is able to help me out here
You can click the Store button top left of this page, then iPod and go to the information on the Shuffle to seew what is included in the box. If Apple says the earphones and cable are not included then they must be purchased separately. You need the cable to sync music, and the earphones to hear since the Shuffle does not have a speaker.
Similar Messages
-
tried synching iphone for the first time on new PC and got error followed by itunes logo and USB cable picture. No idea what went wrong and now phone is in this screen locked. please help!
I tried connecting to iTunes and neither the PC nor iTunes recognizes the device. I went through all the troubleshooting on the Apple website for this issue and nothing worked. I've reinstalled iTunes, the driver, everything and still can't get either the PC or iTunes to recognize the phone. I don't know what else to do :-( any help or suggestions are highly appreciated!
I would hate to have lost all my info, especially contacts and calendar items since I have no idea what was backed up prior to the phone getting locked on this screen. I've been told that my only option is to go to the phone carrier and they will reset it for me, but that means it will wipe out all the info.
I hope someone has a fix other than that one. -
My iPhone froze while downloading a new update. The screen now shows a picture of iTunes icon and USB cable. How do I unlock the phone if I never registered the device on a computer?
Have you tried to restore the iPad back to factory settings from within the Setting App? You might also try and hard "reset" by holding the power button and the home button at the same time until the iPad 2 restarts.
Besides that, find a friend with a computer and try to update it from their comptuer, or if it is close and convenient go to the Apple Store and they will be able to help you. -
upgraded to ios7 iphone now displays itunes logo and usb cable will not restore, will not restart
Hi there emynona,
I would recommend taking a look at the troubleshooting steps found in the article below.
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
-Griff W. -
hello i have a trouble with my i phone... i was trying to update a new software and at the end it says that there is some error and i cannot turn my i phone bak on all it shows is itunes logo in the midlle and usb cable with an arrow pointing at the logo. If anyone knows what it is and what i should do please get back to me as soon as possible many thanks.
http://support.apple.com/kb/HT1808
-
My iphone is in recovery mode, the itunes and usb cable symble displayed, does this mean that all data is lost or is there some way to recover the data on the phone.
Once the Device is asking to be Restored with iTunes... it is too late to save anything...
To minimise loss... Connect to iTunes on the computer you Usually Sync with and Restore from the most recent Backup...
http://support.apple.com/kb/HT1414 -
Please guide me in Finding a sign appeared on the screen as iTunes and USB cable and connect your computer to a conclusion did not even thank
Do as the image suggests, connect the device to a computer running iTunes.
If it is still not working, try posting in your native language. -
i was trying to update my iphone 3gs to ios 6 and then on my iphone screen comes up with a itune logo and usb cable i tryed turning it of conecting it back to the computer and notting happens what do i do how do i fix this problem
mine has done the same thing. itunes isnt even recognizing that my phone is plugged in.
-
Help my iphone is frozen in a screen with iphone logo and usb cable. Happened while I was updatting.
plug it in youre computer and hold the power button and the home button for 30 seconds and then it should have a blck sctreen then press the on button for 15 seconds and an apple logo shoul appear. please answer my problem.
-
My iPad has the iTunes logo and USB cable on the screen. Can I still back up my music and photos?
My iPad has the Itunes logo and USB cable on screen. Can I still back up my files?
If you haven't already done so, its unlikely.
You can try holding both the home and power buttons at the same time until the apple logo appears on the screen, then let go. -
I tried to update the new ipod sofware and my ipod has a itunes and usb cable picture on its face, but after hours it will not do anything. I tried to restore and it won't even do that.
What do I do?If you hit restore, you lose all your previous information.
All I was just trying to do is update my Ipod!!
Now its all messed up. Should have left it the way it was! -
I send my iPhone to apple because my standby button doesn´t fit, what exactly should i send to apple? earphones and charging cable too?
No! All Apple needs is your actual phone. Do not send the box or anything else as they will throw it away and you won't get anything back except for a phone! Do not send the sim card either and make sure you backed it up!
-
IPod touch frozen on screen showing apple symbol and usb cable.
Pod touch frozen on screen showing apple symbol and usb cable. Happened during a update attempt.
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
Finally, if the Restore doesn't work, let the battery drain completely. Then recharge for at least an hour and Restore again. -
After I upgraded my iPad 2 to 6.1.3 I now have a itunes logo and USB cable showing. What has happened? What do I do to get by this. I can not shut the iPad down at all.
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
Plugged in my Apple tv to tv and light flashing non stop.Tv screen showing iTunes logo and USB cable.Not responding to anything
Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Source list, and then click Restore.
Maybe you are looking for
-
How do i run a mdx query in oracle. Do i need to install any extra component. I used the following query and i get an illegal symbol error... SELECT { [Measures].[sales] } on columns, { [Date].[1998],[Date].[1999] } on rows From units_history_fact
-
Hi All, is there a way to change language in UI (web browser level) of WEB Crm? (even thorugh an SDK)? Best Regards, Vangelis Kanellopoulos Edited by: Vangelis Kanellopoulos on Oct 5, 2009 12:55 PM
-
Incomng and Outgoing calls are stop routing every five min
Dear Team, Please find the attached running config and logs.Incoming and outgoing calls are landing on the gateway properly. But call stop working every five min.PRI is up and no error on controller E1. Please advise how to identify the issue? CUCM v
-
What happens with Typekit license, if cc subscription doesn't exist any more?
If I use Typekit fonts to create a website for a customer in Adobe Muse, and I then cancel my CC subscription (let's say, because I am retiring), what happens to the website of my customer. Will the fonts still show up?
-
New Audigy Beta Drivers did they add EAX 4.0 to an Audigy 1 Platinum
Hello, does the new Audigy Beta Drivers add EAX 4.0 Support to an Audigy Platinum ? Greetings Picard007