Win 8 admin problem

I use win 8.1 and I have one user called goksen and it has administrative previliege and also default administrator account is disabled, uac is disabled as you see in control panel picture I can't change to standart account this is normal but in second picture
by typing control userpasswords2 in run dialog and properties of user I can change to standart user isn't it problem
the question is iİf I change second place to standart user how can I gain administrative previliege after

in second picture by typing
control userpasswords 2 to run dialog and clicking properties of user then second tab
I agree with you as you see in first picture you cant select standart user radio button but second picture
you can select standart user but I did not continue by clicking okay button in second picture
but somene tried and lost admin previliege in second picture is it right or wrong I dont know
he said to me

Similar Messages

Problems transferring to new computer. Is Win 8.1 problem?

Problems transferring to new computer. Is Win 8.1 problem?

Hello wjmonti
What issues are you having for moving your music to a new computer? Check out the article below for different ways to move your music to your new computer.
iTunes: How to move your music to a new computer
http://support.apple.com/kb/HT4527
Regards,
-Norm G.

HP Deskjet 712c Win 7 Home problem connecting to shared printer on Win XP Pro PC

Hi,
I am having a problem connecting to a shared printer on my home wireless network. The printer is HP Deskjet 712C. When I had Win XP on all my PCs, I could successfully share the printer from one PC and print to it from any PC. Worked just fine.
However, now I have 2 PCs with Win 7 Home and 1 PC with Win XP Pro. The printer is physically connected to the Win XP box. I have confirmed, on that box, it is being shared. When I try to add the printer on a Win 7 box, I select network printer and get to the point where it needs the driver. It prompts for an INF file. I have no clue where to go from there. I have done the Windows Update thing for Win 7 to update the driver list in the OS. I did see on the Win XP box that there's a place where I can load various drivers to the network for different OSs. I'm guessing that's so the appropriate drivers for those OSs will be available when adding the shared printer in those OSs. Of course, Win Vista and Win 7 are not available there. Is there any way I can share the printer from my Win XP box to my Win 7 boxes?
Also, I've tried physically connecting the printer to one of my Win 7 boxes to share it from there, but I have probems there just getting Win 7 to see the printer correctly. I'm using a Parallel - USB converter cable. When I plug it in, Win 7 sees the printer as a IEEE-1394 device instead of a printer. Even when I install the HP Deskjet 712C drivers in the OS driver list, and select the USB001 port, it tells me the printer is not plugged in, but I know it is.
I would love to hear some ideas! Please help!
Thanks

HI, I have the same issue and recently (1/15/11) posted the problem.
Did you ever figure out what was arong and get it working?

Dual boot – Win XP / Win 7 – activation problems

Here's the scene:
1/ Have Xp installed and CS4 running fine... (used to have CS3 as well but there was a mobo problem and CS3 now gives an activation error message. Too much of a hassle to reformat and reinstall... yada, yada, yada.)
2/ Just installed Win 7 to test as a dual boot option and installed CS4 fresh. PS and AI both give me a "Licensing for the product has expired" message with no options. There are no other activations, meaning no alternative on another system or laptop, etc.
Is there a work around or do i have to do a completely fresh install? Meaning, deactivate CS4 in th XP boot and then reinstall CS4 in th Win 7 boot?
TIA...
Kz

Here is the answer without having to join the site where the answer lies. The stuff that was removed by me were things that I felt were inappropriate for an Adobe Forum. They do not affect the ability to perform the fix:
So you installed Adobe Creative Suite Master Collection or any of its other applications, and now you can’t even open up any of these programs. You’re probably receiving the now semi-infamous “Licensing for this product has expired” pop up error.
This error will more than likely affect the use of the following programs:
Adobe InDesign CS4
Adobe Photoshop CS4 Extended
Adobe Illustrator CS4
Adobe Flash CS4 Professional
Adobe Dreamweaver CS4
Adobe Fireworks CS4
Adobe Contribute CS4
Adobe After Effects CS4
Adobe Premiere Pro CS4
Adobe Soundbooth CS4
Adobe OnLocation CS4
Adobe Encore CS4
Don’t worry, because some guys over at who knows where got the fix that will save you many hours of headaches. The problem lies within the “amtlib.dll” file in each of the CS4 application directories. However, downloading a simple fix and updating each of the files with a newer one can solve this problem.
Step 1:
Download this file it includes both amtlib.dll files the second file(64bit) is only to be added to photoshop (64bit) folder the rest use the regular amtlib.dll file:If you download this file skip to step 3 !
Code:
http://www.megaupload.com/?d=WZKC1K7Q
other files for step 2 using the " removed by si conehead ".
Personally i like doing in manually its only like 17 files you need to change:
Code:
removed by si conehead
Step 2:
Run the (removed by si conehead) and allow for the file to be copied over to all the directories. This should fix all your problems.
If the above two steps didn’t work, try the following:
Step 3:
Search for: “amtlib.dll” in the Adobe folder C:\Program Files\Adobe\.
Step 4:
Replace all the “amtlib.dll” files in each of the Adobe folders with the file in the downloaded fix.
ONLY
do the following steps if the previous steps didn’t work for you.
Step 5:
Go to C:\Windows\System32\drivers\etc, open the “hosts” file there with Notepad.
Step 6:
Add the following lines at the end of the file:
127.0.0.1 localhost
127.0.0.1 activate.adobe.com
127.0.0.1 practivate.adobe.com
127.0.0.1 ereg.adobe.com
127.0.0.1 activate.wip3.adobe.com
127.0.0.1 wip3.adobe.com
127.0.0.1 3dns-3.adobe.com
127.0.0.1 3dns-2.adobe.com
127.0.0.1 adobe-dns.adobe.com
127.0.0.1 adobe-dns-2.adobe.com
127.0.0.1 adobe-dns-3.adobe.com
127.0.0.1 ereg.wip3.adobe.com
127.0.0.1 activate-sea.adobe.com
127.0.0.1 wwis-dubc1-vip60.adobe.com
127.0.0.1 activate-sjc0.adobe.com
::1 localhost
Step 7:
Go to C:\Program Files\Common Files\Adobe\Adobe PCD\cache
and delete the file “cache.DB”
Step 8:
Enter a new serial number for the applications and open up any Adobe Creative Suite program.
Now everything should be working fine.

Install SAP NetWeaver ABAP Trial 7.02 Win 64-bit problems :(

Hello Community,
since 4 Days i try to install this Version of SAP NetWeaver ABAP Trial 7.02 Win 64 Version SP 6,
but it fails every time, i'm at end of my power now , is there any one who can help me with this?
Or gibe me a direkt link to download the current Verson of NetWeaver Trial to learn more about ABAP probramming?
Most problems are with the Database, and MaxDB.
Here is a snippet of Errortext:
An error occurred while processing option SAP NetWeaver 7.0 including Enhancement Package 2 > SAP Application Server ABAP > MaxDB > Central System > Central System( Last error reported by the step :Error during execution of command identifier 'DB_CREATE' : com.sap.sdb.sllib.api.exceptions.ToolException: Error during command: C:\sapdb\programs\pgm\dbmcli.exe -R "C:\sapdb\NSP\db" db_create NSP *,* ERR -24953,ERR_DBEXIST: Database instance NSP already exists). You can now:
Choose Retry to repeat the current step.
Choose Log Files to get more information about the error.
Stop the option and continue with it later.
Log files are written to C:\Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/.
Thanks for any help
Mirso

Hi Senthil,
thanks to you for answer, you mean stop the "serv.exe->MaxDB - Communication server"
that is in Taskmanager visible?
To day i try again to install, and comes to step with creating Database instanz, better as before.
regards
Mirso

Help with Admin Problems

Ok so I have been blessed with the most unlucky of situations anybody could Imagine. My Dilemma is that I now have a new Macbook Pro running Mavericks 10.9.4 as my old one is many, many years old. Now the problem is that I need to unlock the gold padlock on the old computer running 10.5.8 but there is no admin account? All of the users say standard and I thought I had used to be the admin but now its gone. So I looked up ways of fixing the problem including one specific one: Restart computer, Hold command+s, type: "mount -uw /" then: "rm /var/db/.AppleSetupDone" then: "reboot" and had gone through all the settings and set up a new account but the account it made is still only a standard and not an Admin account! And since I still don't have an admin I cannot even delete the new standard account. My poor old Mac is running out of memory and disk room. Any ideas on anything I can do as I no longer remember where the startup discs were put, cannot gain access to any admin privileges, can not unlock anything I need to get to, and have not tried an Apple store yet as I heard they will not do it for you. Anybody have suggestions as I can't get any of my important files off my old mac or even activate our time machine cause it requires the admin info as well

The first user on Mac is also has administrator rights, so use your password for the account.

SimCity 4 runing on Wine with grafic problem

I have installed SimCity 4 with wine in Mountain Lion. The game is running pretty fast but it´s have a big graphic problem as displayed on the picture. Anyone have a solution for that?
I wont play the mac version because even in a strong mac it's runs very slowly.

Please post questions regarding Parallels on the Parallels forums:
http://forums.parallels.com

ARD Admin problem

I'm running ARD 3.4 in a school with 26 iMacs from early 2006 in a lab. Everything was working fine until I had to replace two machines due to hardware failure. I replaced them with the same model computer, restored them from the same image that the rest used, and called it good. I administer ARD from another iMac, early 2008 20" in the building. I went to install some software and found the two I had replaced not working, call them #1 and #3. I removed them from my list, ran the scanner, and found the machines were simply using different IP addresses, so I re-added them to my list. ARD works as usual for all the machines except 1 & 3, listing them as offline, but I am still able to control them (any other tasks fail because the computers are "offline"). I've gone through every setting, both on the machines, and in ARD and the only difference I can find is that ARD reports 1 & 3 as being administered by a computer with a different IP address than the others - I've pinged this IP address and gotten no response. The working computers also have a green light next to the admin machine name, while 1 & 3 do not. I click the edit button at the bottom of this page, but it doesn't actually let me edit anything, regardless of which computer I'm checking.
Has anyone else run into this problem? Any suggestions?

Hi jhana,
I've been combing the boards because I too am having this very same kind of thing happen.
In my case, I moved and have been attempting to recreate the office I had back in AUG 2010. Started setting it all up in January and was delayed due to a lot of hardware failures. Am finally getting around to setting up ARD and my computers are not working with ARD as they did in the past. Many are showing up as Offline. I decided to throw away the prefs and thought it would give me a fresh start, but now many computers on the network are not even showing up!
Misery loves company, but I sure would like to solve this and get happy.
Suggestions anyone?
ARD 3.4 Administered from an iMac PowerPC G5, and the Ethernet & Airport network has 3 more iMacs, a MacMini, and two PowerMacs, and a PowerBook G5, and sometimes an iBook. Things were working great before I moved. Network is configured a bit differently that before, but since I set it up, file sharing seemed to be working OK, so then went I went to set up ARD 3.4 things are not right.
Why?
Thanks in advance and so long for now, TOM

Server Admin Problem - File Sharing fails to load

We recently switched over from a 10.4 server to an Intel Quad Core Xserve running 10.5.8. Things seemed to be working for about a week but now The File Sharing part of Server Admin fails to load. After spinning for a few minutes I get a kNetworkError on the File Sharing Service.
I'm not totally through setting up all the share points so this is causing quite a problem. Otherwise the Sharepoints that are set up are working properly. The first time this happened a server restart cleared the problem. This time nothing seems to help.
Anyone have a cure for this?

The problem seems to be getting worse. Once the error occurs some of the other services are not available through SA either. Anybody have any suggestions, or is it a reformat and reinstall situation?

IP Admin Problem

I am unable to install my printer on my MacBook 10.5.8
I have pasted into the Terminal:
dseditgroup -o edit -p -a admin -t group _lpadmin
I then press enter and it asks for my password, but when I type it in nothing happens, nothing types.
How do I enter my password if I cant type it in please?
I have searched this forum and I cant find anyone else with the password input problem
Hope someone can help
Thanks

Keep typing it in. It's not supposed to display anything onscreen when entering it in the Teminal.
(91739)

Delegated Admin - Problem

I just installed the SC 6 Update 2 all component in the same server....when i try to create a user with delegate admin i have the following error
/opt/sun/comms/da/bin/commadmin -v user create -D admin -n domain.com -l username -d domain.com -w password -S mail,cal -H servername.domain.com
FAIL
*5088:Error message required. missing resource string -> norgsmd null*
the only way to make work is if I remove the " -S mail,cal". I enable mail & cal to be use with convergence, the object exist in the LDAP because the admin user that was created with the installation has all the objectsclass needed for calendar and mail, so if I login into convergence I see the calendar and email folders...
and then a I run the command /opt/sun/comm/im/sbin/imadmin assign_services to assign the services to all users in a specific domain and it executes without problem but without changes...the users still have the same objectclass
the complete output of the command is :
bash-3.00# /opt/sun/comms/da/bin/commadmin -v user create -D admin -n domain.com -l username -d domain.com -w 12345 -S mail,cal
[Debug]: DBG:Object = user ; task = create
[Debug]: default domain from Properties: domain.com
[Debug]: IShost from Properties: mail.domain.com
[Debug]: ISPort from Properties: 80
[Debug]: Contacting : http://mail.domain.com:80/commcli/auth
[Debug]: To servlet: domain=domain.com&username=admin&password=12345&charsetenc=UTF-8
[Debug]: cookie => JSESSIONID=6777b671e5fb7eee49f1851ec1a3; Path=/commcli
[Debug]: RECV: OK
[Debug]: RECV: OK
[Debug]: RECV: dn: uid=admin, ou=People, o=domain.com,dc=domain,dc=com
[Debug]: RECV: nsroledn: cn=Top-level Admin Role,dc=domain,dc=com
[Debug]: RECV:
[Debug]: DBG: before getobjtaskargs
[Debug]: In getObjTaskArgs for: user; create
[Debug]: Contacting : http://mail.domain.com:80/commcli/climap
[Debug]: Sending to servlet: task=create&object=user
[Debug]: getObjTaskArgs Status: 0
[Debug]: Number of servlets: 1
[Debug]: Servlet Name: TaskManager
[Debug]: Servlet args: task=CreateUser
[Debug]: Servlet args: objecttype=User
[Debug]: Valid Options Array: 8
d, true, , false, true, user's domain, domain, ,
l, true, , true, true, user's login ID, add_uid, ,
F, true, , true, true, user's first name, add_givenname, ,
L, true, , true, true, user's last name, add_sn, ,
I, true, , false, true, user's middle initial, add_initials, ,
W, true, , true, true, user's password, add_userpassword+confirm_userpassword, ,
S, true, , false, true, service(s) to be added , add_services, mail={H;true;#;false;true;user's mail host;add_mailhost;#},{E;true;#;false;true;user's email address;add_mail;#}::cal={E;true;#;false;true;user's email address;add_mail;#},{B;true;#;false;true;user's back end calendar server;add_icsdwphost;#},{J;true;#;false;true;first day of the week;add_icsfirstday;#},{T;true;#;false;true;user's timezone;add_icstimezone;#},{k;true;#;false;true;calendar version - legacy or hosted domain;cal_version;#},
A, true, , false, true, attribute to add, <attr name>:<value>, add_, ,
[Debug]: DBG: getObjTaskArgs done
[Debug]: servInfo len = 1
Enter user's password: 123456789
[Debug]: argVal =domain.com
[Debug]: servCommand =task=CreateUser&objecttype=User&domain=domain.com
[Debug]: argVal =username
[Debug]: servCommand =task=CreateUser&objecttype=User&domain=domain.com&add_uid=username
[Debug]: argVal =test
[Debug]: servCommand =task=CreateUser&objecttype=User&domain=domain.com&add_uid=username&add_givenname=test
[Debug]: argVal =test
[Debug]: servCommand =task=CreateUser&objecttype=User&domain=domain.com&add_uid=username&add_givenname=test&add_sn=test
[Debug]: argVal =123456789
[Debug]: servCommand =task=CreateUser&objecttype=User&domain=domain.com&add_uid=username&add_givenname=test&add_sn=test&add_userpassword=123456789
[Debug]: argVal =123456789
[Debug]: servCommand =task=CreateUser&objecttype=User&domain=domain.com&add_uid=username&add_givenname=test&add_sn=test&add_userpassword=123456789&confirm_userpassword=123456789
[Debug]: argVal =mail
[Debug]: servCommand =task=CreateUser&objecttype=User&domain=domain.com&add_uid=username&add_givenname=test&add_sn=test&add_userpassword=123456789&confirm_userpassword=123456789&add_services=mail
[Debug]: argVal =cal
[Debug]: servCommand =task=CreateUser&objecttype=User&domain=domain.com&add_uid=username&add_givenname=test&add_sn=test&add_userpassword=123456789&confirm_userpassword=123456789&add_services=mail&add_services=cal
[Debug]: Contacting : http://mail.domain.com:80/commcli/TaskManager
[Debug]: To servlet: task=CreateUser&objecttype=User&domain=domain.com&add_uid=username&add_givenname=test&add_sn=test&add_userpassword=123456789&confirm_userpassword=123456789&add_services=mail&add_services=cal
[Debug]: RECV: FAIL
*[Debug]: RECV: 5088:Error message required. missing resource string -> norgsmd null*
[Debug]: CLITask: status returned =FAIL
FAIL
*5088:Error message required. missing resource string -> norgsmd null*
[Debug]: DBG: doOne returned code=6
[Debug]: Contacting : http://mail.domain.com:80/commcli/logout
[Debug]: Logout ...
any help will much appreciated
CA

KenGra wrote:
I found the problem, the default domain that was created during the installation did not have all the objectclass needed, such as calendaruser etc....Did you remember to run the "./commadmin domain modify -S mail -S cal -H mailhost" for the default domain after the installation of Delegated Administrator?
Regards,
Shane.

Shares-admin problem

I have a problem with shares-admin application on Gnome. I've been install Samba through wiki (http://wiki.archlinux.org/index.php/Samba), and install gnome-system-tools and nautilus-share package for easy share of my files. But Add and Unblock buttons of shares-admin don't be able to press. And on nautilus-share, "Share through" is disable to me.
Any ideas about this issue? Thanks in advance.
Last edited by alessandro_ufms (2008-11-17 14:31:32)

Have you found a solution to this? Or has anyone else got any idea of what might be causing this?
I'm having the exact same problem. Shares-admin doesn't allow me to do anything (not even change the workgroup name) except for removing shared folders.
I can share folders with no problems by editing the smb.conf file (and other computer are able to access them - so samba is working), but I can't do it from nautilus nor can I view the shared folders of other computers.
It seems like this user has no access to samba... do I need to add this user to any group (it didn't use to be like this)?
I know it used to work some time ago, but since I rarely share new folders I can't tell what update caused it to stop working.

Admin problem with WRT54G

I am logging into my WRT54G to try to upgrade my firmware. The problem is that when I log in, I get a error on the page and it will not bring up any of the links or icons that I would use to go to Administration or check my wireless or anything. Does anyone even know where to start with this? I am using XP Pro and IE6 SP2.
Any ideas?
Thanks,
Derek

If you are getting a 401 error, the router most likely did not accept your user name and password. The defaults are: user name is left blank, and password is "admin" (with no quotes). If you changed these, then you will need to enter whatever you changed them to. If you cannot remember what you set them to, then the only other option is to reset the router to factory defaults. This will reset the user name and password to the values noted above.
Sometimes this problem is caused by communication errors between the computer and router. To correct this, do the following:
Use Internet Explorer, it usually works.
JavaScript must be enabled.
Use a computer that is wired to the router.
In the non-working computer, temporarily turn off your software firewall. Note that some Zone Alarm users have had to uninstall the firewall to get it turned off.
If you cannot get anything at 192.168.1.1 then perhaps this is not your router's address. Go to "Start" > All Programs > Accessories > Command Prompt.
A black DOS box will appear. Type in "ipconfig" (with no quotes), then hit the Enter key. Look at the "Default Gateway". Is it 192.168.1.1 ? Point your browser to the "Default Gateway", then login to your router.

Admin problem activating Firevault in User a/c

Have activated FireVault in my Admin a/c & in one user a/c, no problems. However in the last a/c , my partners its refusing to acknowledge my admin password which is valid. There's is plenty of HD space available. Any Suggestons? There's is nothing (data,photos) much in the a/c so one option is thrash it & create a new one but before I do this I just wanted to see if there's is a reason why this is happening.
Thanks

Hello LT
apologies for the late reply but tried earlier via by 5S but was unable to post a reply.
Your last Q got me thinking as when I looked at the profile last night before initiating thread the user had admin rights which I then removed, no problem. When I returned home a little while ago tonight I tried to activate FireVault using her user name & password = no luck. I tried again with admin rights = no luck. Finally I tried again using admin password but this time I changed the case of the first letter & yes it worked. Seems strange but you may have an answer. In the other two profiles I had no issue & even now re. logging in & making other admin changes the lower case version of the password works.
We had a break-in 2 days ago & we were v fortunate. He had the iMac removed but was interrupted. Hence my FireVault activation.
Thanks for your help. Hope this is of help to the third party who is experiencing the same problem.
Kind regards,
Dino.

From schema 1 to schema 2 migration delegated admin problem

I want migrate from schema 1 to schema 2 the messaging server 6.2 ( jes 2005q1).
I have install access manager and delegated admin.
With the commdirmig I migrate the domain and schema , the messaging work correctly.
I have a problem with the delegated admin web interface.
The delegated don't view my domain. If I add the sundelegatedorganization objectclass I can view my domain on delegated admin but I can view user and group.
Any Idea?
TIA
Bye Giovanni

There are two very different products called "deletaged admin". The old iPlanet Delegated Admin (iDA) only works with Schema 1. The current Delegated Admin, that comes with JES3 only works with Schema 2.
If you're using the old iDA that worked with schema 1, it won't work with schema 2. You have to install the new DA for that.
It doesn't work with groups/lists, only with users and domains.

Win 8 admin problem

Similar Messages

Maybe you are looking for