Win7 update and monitor screen
Hi
im worried about the monitor screen as every time i update the screen goes blurry and fuzzy
for few minutes then ok back to normal again there no manaul saying so this happen and
it worrir me every time this happens that it ruin the screen is it nomal i have a " HP Touchsmart 520-113a Desktop pc" 1st time i had one of these and there no manual to go with it i spoke to a rep about it say it normal he said it configuring the graphics every time it updates from microsoft seem strnage to me that that happens i cant use the pc as i cant see nothing .
any one help here to redue the fuzzy and blurr or get rid it
thank
Cabal18
Hello Cabal18
So the screen goes blurry or fuzzy during updates? Are you doing Windows updates? Also what kind of updates are installing? Some times when installing updates it is common for the screen to become fuzzy and/or even shut off for a moment, or until the process is complete.
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.
Similar Messages
-
Update and membership screen problems
Photoshop Elements9.03 update won't install. Adobe AIR support advisor says there is no problem.
a 2nd problem, I just installed this version in my laptop and my membership screen doesn't load. If I go to the internet and enter my url. it is there. I have gone to my Welcome screne and opened it, and it doesn't accept my correct password.I had the problem before the firmware update, and I still have it. It's peculiar because the sound controls work and you get feed back when you hit the space or return key, indicating that there's a software jam somewhere; and the keyboard lighting works.
At first I went through shut down and restart using the on/off button.
Current strategy is to wait a while, then shut the lid, wait until the sleep light goes on, then lift the lid again, and hit the return button. There's some very subtle changes in the whirring and clicking and then the screen comes back on. Sometimes it seems to come on after I lift the lid the second time without my having to hit the return button.
I'm suspicious of the sudden motion sensor, since this usually happens after I've picked up the MacBook Pro and put it on my lap; but I haven't shut that off yet and tested it. There are, I think, some threads under the "Power and Batteries" forum that may be discussing the same thing.
macbook pro Mac OS X (10.4.6) -
I am trying to buy an app on my Iphone5. I needed to update my credit card info. It wont take the updated info and the screen is now frozen. I cannot go back into the app store
It's a network issue, not an account balance issue. Troubleshoot your network or just restart your iPod and/or router, try connecting to the Store a bit later, or try the download in iTunes on your computer and then sync the purchase to your device.
-
Ipad mini did update and now screen rotation is locked.. can this be fixed ?
I did and update for ipad mini and now the screen rotation is locked. I am seeing other posts about this update and am afraid this will be step one in more issues. Afraid to do the upgrade on my mac. Last time I had to take it in to the genius bar to have them fix it. Whaat? Any help would be appreciated. Thanks/
See the following for info on the Side Switch settings that can either control Orientation Lock (screen rotation) or Audio Mute.
*iPad side switch settings link:
http://support.apple.com/kb/HT4085 -
Stuck between installing updates and off screen!?
MacBook ran out of battery, and turned off, I then went to charge it and now can't install updates and goes to black screen with this sign on it
The message is ...
The iPad "iPad" could not be updated. An unknown error occurred (3004)
There is a More Information button which takes you to an Apple help page but that doesn't help
Error 3194, Error 17, or "This device isn't eligible for the requested build" - Apple Support
Thanks -
OK - so I just got the latest iTunes update, and then tried the 'full screen' button - fine, but how do I get it to not be full screen? Escape doesn't work, and I can't find a window button. Help.
Also, I love that full screen apps are 'new'. Anyone remember DOS???Tracking this to see what advice you get ... I have the same issues!
-
10.5.7 update and Restart Screen
I have just updated to 10.5.7, then i tried to use Preview to look at a picture, and it did'nt open so i tried to Force Quit, but it failed. So then I restarted my Mac, and I got a screen with an Apple Logo on it, then a transparent gray screen came down saying I have to restart my computer. I did this several times, and tried booting in safe mode. Nothing. Please help.
That's a kernel panic. See
What is a kernel panic,
Technical Note TN2063: Understanding and Debugging Kernel Panics,
Mac OS X Kernel Panic FAQ,
Resolving Kernel Panics, and
Tutorial: Avoiding and eliminating Kernel panics for more details. -
7.1.1 Update and Locked Screen Stopwatch
After I completed the 7.1.1 update, when I start a stopwatch and lock my phone, it will no longer show the time remaining on the locked screen when wake my phone up.
This was working properly before the update.[UPDATE]
Sorry about misleading you and anyone on this forum. I should have double checked what was really wrong with my phone before posting this. It was not the stopwatch that had a problem of not showing on the lock screen, but it was the Timer that did not show on the lock screen after the 7.1.1 update. After I did a reboot (shutting the device of and power it back on), this corrected the issue and now I see the Timer on the lock screen. -
Update and blank screen problem
Hi I recently was having the problem were my 8800 would get a blank screen and the red led would blink and the phone would not turn on. I pulled the battery and let it sit and it started to work again. After experiencing this I decided to connect my phone and back it up and try to update the software. I downloaded the bbdm and started to update my phone. I get to the point in the update " loading system software" Gets about half way though and stops completely. I let the phone sit for 2 hours and hasnt made any progress. I then disconnected it and re connected it and tried the update again. Same problem doesnt make it past loading system software. Im really at a lost. any ideas??? thanks
I recently had the same issue when I upgraded to the 4.5 OS. Blackberry had me pull the battery and run the loader.exe program. It solved my problem. You have to keep the battery out until it asks to initialize.
I hope this helps -
Satellite L840 - BIOS update and blue screen
Hello,
I recently bought a Toshiba L840-04E (PSK8LA- O4E007) and installed Windows 7 64bit.
Issue: BlueScreen
Question: I assume this is the dreaded "blue screen of death" and I need to do something to prevent servious problems in the future (I've used the laptop lightly for a couple of days with no issues).
How do I analyze the dump information to find out what caused the blue screen?
Or is it best to go back to the last restore point before the blue screen event? A restore point was made before I updated the BIOS from v 1.80 to 6.20. Also, Toshiba shows that there is a new BIOS 6.30 version.
Before the blue screen event I had changed the setting for the on/off button to "shut down" and made a few minor other changes to settings and then just before the blue screen error I plugged in a Seagate External Hard Drive.
Are there any suggestions about what steps I should take?
Thanks so much.
AprilHi
Generally the BSOD appears due to serious software problem or hardware problem.
You said you connected an external USB HDD to the notebook right before the BSOD appeared so probably the BSOD was caused by the attached HDD who knows
If this happened for the first time, dont be afraid it could be just a temporal problem
But if it would appear often, you should investigate a little bit and should try to replicate the issue and the reason for that -
Regarding the new update and lock screen backgrounds. Lenovo Yoga Tablet 2 10 Android
Has anyone figured out how to change the lock screen background for the Lenovo Yoga Tablet 2s yet?
Yes that is correct! Serene! I received the Yoga Tablet 2 10 from you.
The Yoga Tablet 10 I used in the comparison and the benchmarks was the one I won from Lenovo Belgium. -
Did new update, and now screen when to old graphic and shows folder
I recently did the newest update on my ipod, and then it deleted all my songs and when to these old school graphics and will only show a folder with an exclamation point. My computer is having trouble recognizing it also. Please help!!!
I recently did the newest update on my ipod, and then it deleted all my songs and when to these old school graphics and will only show a folder with an exclamation point. My computer is having trouble recognizing it also. Please help!!!
-
Lion update and FaceTime screen
one of the new features of Lion is a full wide screen on FaceTime. I used my FaceTime but the screen is still small. How do I get it to use up the whole screen on my mac pro? thanks
Does anybody answer this problem? I have the same one.
-
My iPad mini won't update my apps. I have closed all open apps and done multiple resets. I hit update and the screen is blank, even though the bubble shows 14 to update.
If you are getting the blank app update screen, many people are having this problem over the last couple of days.
According to Fly150 in another discussion, this will work.
If you want to update the Apps while waiting for Apple to fix Updates:
1. Go to App Store
2. Select Purchased
3. Select All
4. Scroll down to find the Apps showing update
5. Select update on the Apps
This should update the Apps and get rid of the update count in App Store. Apple needs to fix this. It is a workaround only until then. -
I accidently unplugged my I-pad 2 from my computer during the latest software update and my screen is stuck on the "apple with update bar."
Suggestions?Try and force the iPad into Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times.
Maybe you are looking for
-
seriously wont work. i hate this. help.
-
How do i view video uploaded from iphone 4s to my laptop
I think this is ridiculous you take a video to put on you tube,you transfer it to your laptop and you get sound no video why does this happen anyone help me please.
-
hi sap gurus, i have an issue with one invoice that was routed to us. The blocking reason is "no receipt in system" which i see on my inbox. The invoice is with referrence to one PO. By checking invoice A, it was cancelled by a credit memo invoice. F
-
How to find which field is erroring
Hi Can anyone out there tell me if there is a way in Forms 6i to find out which field on a block is raising an error? I have a situation where entering duff data into a field causes an error to be raised (the ON-ERROR trigger for that block is fired)
-
I wish to rename my drive letter & not create problems
I had an SSD installed on my PC. The SSD is 'C' & kept for programs only. The other drive letters I have currently got displayed don't make much sense.I started with CD burner & Blu-ray burner & got them away from my own files by changing the drive