WinPE Error Capture and Deploy Win7 - SCCM 2012 R2 w/ CU1

Hi Forum
Deploy and Capture: Windows 7 x64
SCCM Primary single site server: Server 2012 R2
Version: SCCM 2012 R2 w/ CU1
Environment is Hyper-V on Windows 8.1, deploying to a Gen1 VM with a legacy adapter.
I am running into an issue whilst building a lab environment. I have built a Capture and Deploy TS (using the standard TS, ie not MDT although this is integrated) and deployed to an imported machine using the MAC address via PXE. Custom Client package has
been created and put against the TS.
The machine picks up the PXE response and boots into the SCCM WinPE environment and I choose the TS. The only currently available TS is the Build and Capture.
It runs through the TS restarting at various points as expected and then after the Client Manager package is installed it restarts and runs the TS... at this point it starts saying. "Initiating Hardware Devices.." (or something to that effect).
It does this for about 15 seconds before I get this error:
Windows PE initialization failed with error code 0x8022001B
Seen here:
I am unable to get the cmd prompt up at this point and it will restart and carry on a normal build, no TS running, meaning no capture.
If any can advise, please do.
Thanks in advance
NN

Hyper-V should work fine without any drivers injected, and you did your VM correctly.
During this error, what you see in a back ground, ConfMgr wallpaper or Windows 7 black first-run screen "preparing/first run"? I´m just thinking, is there any chance, that you have additional restart step set to boot to WinPE, instead of booting
to default OS?
Otherwise, you will need to be able to Access CMD with F8 for more troubleshooting. Make sure you have F8 command Support enabled on boot image and re-distrubute it. Or create new boot image as Peter suggested.  

Similar Messages

  • How to repackage "jre-7u72-windows-i586.exe" application and deploy through SCCM 2012

    Hi,
    Along with IE 11 we are planning to deploy "jre-7u72-windows-i586.exe"
    Created transform file for "jre-7u72-windows-i586.exe" by using Adminstudio Installshield.
    Identified vendor .MSI file at
    %AppData%\LocalLow\Sun\Java\jre1.7.0_72\jre1.7.0_72.msi"
    %AppData%\LocalLow\Sun\Java\jre1.7.0_72\Data1.cab
    Created Transform file
    Created transform file for "jre-7u72-windows-i586.exe" by using Adminstudio Installshield with the Tuner feature
    My queries:
    Do we have any best practices while repackaging “jre-7u72-windows-i586.exe?” by Adminstudio
    How to deploy the jre-7u72-windows-i586.exe application assuming with parallel deployment of IE
      11.
    Do we uninstall lower versions of Java when installing any newer versions like jre-7u72-windows-i586.exe?
     if yes then how to handle
    Do we install jre-7u72-windows-i586.exe application without uninstallations of any lower version of JAVA , if yes then how to handle
    Looking for best practices / Customizations ?
    Thanks, appreciate your help.
    Han,
    Gc.Hanumareddy

    Alternatively, why not actually reference Oracle official documentation or post in their forums (because as Torsten said, this really has nothing to do with ConfigMgr or Microsoft even).
    http://java.com/en/download/help/msi_install.xml looks to be a great place to start.
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • Lync 2013 x64 silent client deployment via SCCM 2012 SP1

    Greetings everyone!
    I ran into a problem with Lync 2013 x64 silent deployment.
    I need to provide every workstation with Lync 2013 client, so i decided to use deployment via SCCM 2012 sp1.
    I created 2 msp files with OCT, one based on x86 Office 2013 Proplus, and other based on x64 Office 2013 Proplus.
    Added them as applications to sccm software library.
    Deployment of Lync 2013 x86 application was a success with over than 80% compliance. 
    But all Lync 2013 x64 automatic installations finish with different errors.
    I created special device collection for workstations with office 2010 x64 and 2013 x64, because i can't install other architecture products once it has x64 product installed.
    My membership query-rules for this collection:
    Office 2013 x64
    select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client from SMS_R_System inner join SMS_G_System_INSTALLED_SOFTWARE on SMS_G_System_INSTALLED_SOFTWARE.ResourceId
    = SMS_R_System.ResourceId where UPPER(SMS_G_System_INSTALLED_SOFTWARE.SoftwareCode) = "{90150000-0011-0000-1000-0000000FF1CE}"
    Office 2010 x64
    select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client from SMS_R_System inner join SMS_G_System_INSTALLED_SOFTWARE on SMS_G_System_INSTALLED_SOFTWARE.ResourceId
    = SMS_R_System.ResourceId where UPPER(SMS_G_System_INSTALLED_SOFTWARE.SoftwareCode) = "{90140000-0011-0000-1000-0000000FF1CE}"
    My application deployment type points to setup.exe in office 2013 x64 installation folder, where i created msp file in updates folder via OCT and edited config.xml file in proplus.ww folder.
    So my installation program looks like this setup.exe /adminfile updates\1lync.msp /config proplus.ww\config.xml
    The same configuration works with Lync 2013 x86 deployment, except other setup folders.
    When i try running installation program setup.exe with /adminfile and /config parameters locally, it installs successfully without errors or warnings.
    I'm trying to find out problem source, does anyone have ideas what I am doing wrong?
    Also i'm trying to reduce office 2013 installation folder size, what subfolders are necessary for Office 2013 proplus installation (still installing only lync with common files and tools)? Because now 3.5 GB package is quite hard to distribute to sccm secondary
    sites with deployment point.
    Thanks in advance.

    Hi,
    Here are some tips and tricks for your reference.
    Tips and Tricks: Deploying Lync 2013 client using SCCM 2012 | Lync 2013 Client Customization for SCCM 2012 Deployment Package
    http://zahirshahblog.com/2014/01/08/tips-and-tricks-deploying-lync-2013-client-using-sccm-2012-lync-2013-client-customization-for-sccm-2012-deployment-package/
    Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Windows 7 Deployment using SCCM 2012

    I am installing Windows 7 Enterprise 64bit on HP Desktops and Laptops using SCCM 2012 task sequence. I captured an image from the reference computer using capture media. The image works fine on Hp Desktops but when I install the same image on HP laptops,
    I get an error message right at the end "Windows Setup could not configure Windows to run on this computer's hardware". I captured another image with plain Windows 7 Enterprise without SP1, updates and drivers. it works perfectly fine on all desktops
    and laptops both. Below is the setupact and setuperr error logs. Much appreciated. 
    SETUPACT.LOG
    capisp.dll::CryptoSysPrep_Specialize: assigned CAPI machine guid "d01b5e9b-0af5-4b3c-a712-70977e79a177"
    2014-08-26 21:19:04, Info                         capisp.dll::SamConnect failed: c00000dc
    2014-08-26 21:19:04, Info                         capisp.dll::CryptoSysPrep_Specialize: DisableAdministratorIfApplicable failed
    2014-08-26 21:19:04, Info                         capisp.dll::CryptoSysPrep_Specialize: returning 65b
    2014-08-26 21:19:04, Error      [0x0f0082] SYSPRP LaunchDll:Failure occurred while executing 'C:\Windows\system32\capisp.dll,CryptoSysPrep_Specialize', returned error code 1627[gle=0x000003e5]
    2014-08-26 21:19:04, Info                  IBS    Callback_Specialize: Internal Providers Specialized Failed. System can't proceed to handle Internal Providers
    2014-08-26 21:19:04, Info                  IBS    Callback_Specialize: Specialize return: [1627]
    2014-08-26 21:19:04, Error      [0x060435] IBS    Callback_Specialize: An error occurred while either deciding if we need to specialize or while specializing; dwRet = 0x65b
    2014-08-26 21:19:04, Info       [0x0640ae] IBSLIB PublishMessage: Publishing message [Windows Setup could not configure Windows to run on this computer's hardware.]
    SETUPERR.LOG
    2014-08-26 21:16:24, Error                 SYSPRP SPPNP: Error 0x25 (CONFIGRET) occurred while determining the buffer size needed to hold the list of devices that are using service usbhub20.
    2014-08-26 21:16:24, Error                 SYSPRP SPPNP: Error 0x424 occurred while opening a handle to the service usbhub20.[gle=0x00000424]
    2014-08-26 21:19:04, Error      [0x0f0082] SYSPRP LaunchDll:Failure occurred while executing 'C:\Windows\system32\capisp.dll,CryptoSysPrep_Specialize', returned error code 1627[gle=0x000003e5]
    2014-08-26 21:19:04, Error      [0x060435] IBS    Callback_Specialize: An error occurred while either deciding if we need to specialize or while specializing; dwRet = 0x65b

    Hi,
    From your error log, we could see the root is the incorrect driver.
    How did you get the driver in your first image? If you enable "PersistAllDeviceInstalls" configuration when you capture the image, all Plug and Play devices in reference computer are uninstalled during the generalize pass and then reinstalled
    during the specialize pass.
    However, it‘s not always applied to your laptop.
    Thus I suggest you download the proper driver or change the BIOS hard disk drive setting to IDE to check the result.
    Warning: This procedure may involve changing your hard disk drive settings in the BIOS. Incorrect changes to the BIOS of your computer can result in serious problems. Microsoft cannot guarantee that problems that result from changes to the
    BIOS can be resolved. Change the BIOS settings at your own risk. Incorrect or corrupted BIOS settings can cause startup problems or shutdown problems.
    In addition, you could refer to the article below:
    “Windows Setup could not configure Windows on this computer’s hardware” installation error on a Windows 7-based or a Windows Server 2008 R2-based computer
    http://support.microsoft.com/kb/2466753/en-us
    Karen Hu
    TechNet Community Support

  • Is MDT must have for OS deployment in SCCM 2012

    I know that existing MDT could be integrated to a new SCCM.
    Is MDT must have for OS deployment in SCCM 2012 or SCCM has its own engine for OS deployment?
    --- When you hit a wrong note its the next note that makes it good or bad. --- Miles Davis

    Thanks for the answers.
    one more question...
    I am going to start SCCM deployment in test environment.
    For OS deployment part:
    if MDT is planned for integration with SCCM should I configure OS deployment in SCCM before adding MDT.
    Or in this scenario OS deployment in SCCM could not be touched.
    After all previous answers I understand that OS deployment module is part of SCCM installation and is independent from MDT.
    --- When you hit a wrong note its the next note that makes it good or bad. --- Miles Davis

  • How to find who modified Software Update deployment in sccm 2012

    Hi,
    How to find who modified(Date & Time) software update deployment in SCCM 2012 ?

    In the Console :
    Monitoring / System Status / Status Message Query
    Right Click : "Deployments Created, Modified, or Deleted" - Show Message and select your period.
    You'll have your information there.
    Benoit Lecours | Blog: System Center Dudes

  • Review and document existing SCCM 2012 R2 CU1 Environment

    What all tools (MS and Non-MS) are available to Review and document existing SCCM 2012 R2 CU1 Environment? I am aware of following:
    SCCM 2012 BPA
    Autodoc (is it still available)
    What all should be included in such a review and recommendations?

    There's also.
    http://www.david-obrien.net/2014/01/30/update-inventory-script-makes-configmgr-life-easier/
    What should such a tool provide? What do you expect from it do to exactly?
    Torsten Meringer | http://www.mssccmfaq.de

  • SCCM 2012 R2 sp1 cu1 ccmsetup.exe still 5.00.7958.1000

    I downloaded sccm 2012 r2 sp1 cu1.  I applied the server update to our Primary server.  I also pushed out the client update (5.00.7958.1203) to all of our servers.  But I have noticed that any new servers are still showing client version as
    5.00.7958.1000.  I checked the version of ccmsetup.exe on our Sccm primary server and it is showing 5.00.7958.1000.  I would have thought when I applied the sccm 2012 r2 sp1 cu1 server update to the primary server it would have updated the ccmsetup.exe
    to version 5.00.7958.1203.  I know with time the client on new boxes will be updated with the client update push I have running on all windows server collection, but why not just have the most current version from the start.  I searched for
    an updated copy of ccmset.exe on the primary server, but never found it.  I checked MS site for the most current version of sccm 2012 client install, but could find that either.  Any help would be greatly appreciated,
    Mark

    Nope. CU1 is simple an update that must be layered on top of the R2 client. You can do this using either SCUP or a program deployment using the package/program that was created during the CU setup.
    For reference:
    http://technet.microsoft.com/en-us/library/jj553405.aspx
    As a side note, this is something on most folks top 10 list of things they want changed but don't count on anything anytime soon.
    Jason | http://blog.configmgrftw.com

  • CRM2013 Silent deployment through SCCM 2012 R2

    Hello.
    First of all im sorry, if im posting in the wrong Forum - but this seemed as the correct one.
    I want to deploy CRM 2013 Outlook Client, through Software center - but i cant seem to get it working.
    I cant seem to find a way, to disable / accept the License Agreement automatically, so that our Domain Users can enjoy a completely silent CRM deployment.
    I have tried several guides, and i have also tried with SetupClient.exe /A - and the "guide" completes, but theCrmClient_32.msi dosent work.
    I would really appreciate, if some of you guys would help me out :)
    We are using SCCM 2012 R2
    Datatechnician

    Looks like you need the /Q switch for this
    http://msdn.microsoft.com/en-us/library/hh699665.aspx
    /Q              
    Quiet mode installation. This parameter requires a configuration file in XML format. The /i parameter contains the name of the XML configuration file. No dialog boxes or error messages will appear on the display screen. To capture error message information,
    include the log file parameter (/L or /LV).
    Gerry Hampson | Blog:
    www.gerryhampsoncm.blogspot.ie | LinkedIn:
    Gerry Hampson | Twitter:
    @gerryhampson
    Hello.
    Ive found the solution my self :)
    SetupClient.exe /quiet /passive /norestart
    I didnt thought that you could have a /q and /p at the same time
    Datatechnician

  • Office 2013 Professional Plus - 32 bit Deployment takes an unacceptable time to deploy in SCCM 2012 - SP1 CU3

    We recently migrated over to SCCM 2012 SP1 - CU3 the first of the year from SCCM 2007 SP2.  We have used SCCM in the past to deploy Office 2010 and had deployed Office 2013 to our IT Dept. before moving over to SCCM 2012.  The deployment went as
    expected.  Now that we are ready to start deploying Office 2013 to our corporate workstations, the deployment time is running 4.5 hours to 5.5 hours from the local site server DP.  I am afraid to find out what time we are looking at for remote DP's. 
    The three factors that are different is that our SCCM site server is virtual, it is running 2012 for the OS, and obviously SCCM 2012-SP1 - CU3.   We are using the same package source files.   Previous to a successful deployment we were
    seeing hash mismatch errors which MS support pointed us to the nic driver on the VM was using E1000E and to change it to a VMX something driver.
    So I guess my question is anyone else out there deploying Office 2013 ProPlus - 32 bit from this type of environment?  Our previous deployment time for office was a little over an hour (not five hours).  Any suggestions where to look to improve
    the deployment time? 
    I am expected to deploy this in one week and have been working on these issues for weeks.

    I see now that you are using a combination of scripts and ConfigMgr package/program.
    The AppEnforce.log file is for use with the new ConfigMgr Application model.
    Is there any reason that you don't use the new model for deploying Office 2013? It's a single step process and perfect for it. If you use the Office Customisation Tool you can customise what you like. The process will then uninstall Office 2010 and install
    Office 2013.
    This is how you do it
    http://www.gerryhampsoncm.blogspot.ie/2013/03/sccm-2012-sp1-step-by-step-guide-part_9368.html
    Gerry Hampson | Blog:
    www.gerryhampsoncm.blogspot.ie | LinkedIn:
    Gerry Hampson | Twitter:
    @gerryhampson

  • Windows Updates constantly failing and reverting after SCCM 2012 R2 pushes out updates

    Hi folks,
    I wonder could anyone help me with a strange problem I am having!
    We use SCCM 2012 R2 and I am trying to roll out updates to a Windows 2008 R2 Standard 64 bit server. 
    When I deploy the updates to the server they get to the server and install but during the reboot it says Windows Modules Installer for a while then shows the failure configuring Windows Updates, reverting changes screen.
    I’ve tried the suggestions of disabling 'Windows Management Instrumentation' and 'Windows Modules Installer' and renaming the repository folder but still no joy.
    If I use Windows Update to install the updates the updates do go on but then when I add it to the collection in SCCM to push out the patches it sees the server as if the updates aren’t installed and begins doing the installs. 
    After the patches installs using SCCM and when the server is rebooted it goes back into the loop of saying Windows Modules Installer and reverts the updates and strips out the patches again.
    I was hoping that when the Windows Updates were installed via Windows Update and once I put the server into the collection to push out the updates to the server it would have shown that the updates are already installed on the server and show that server
    as being compliant in SCCM but unfortunately that isn’t happening.
    It sights a couple of errors in the Setup event logs on the offending server: -
    For multiple patches - Package KBXXXXXXX failed to be changed to the Installed state. Status: 0x80070643
    For multiple patches - Initiating changes for package KBXXXXXXX. Current state is Invalid Resolved. Target state is Installed. Client id: WindowsUpdateAgent.
    After doing some research,
    0x80070643 refers to a .Net Framework issue so I’ve ran a .Net Repair tool but that didn’t work either so I’m running out of ideas so any help would be greatly appreciated on how I can get this sever updated using SCCM and showing as compliant.
    Thanks,
    Bonemister

    Hi Torsten,
    Thanks for your reply!
    I was afraid you were going to say that as it just doesn't make sense that when I install the update using Windows Update via the Ire-nternet and when the install and re-scan no updates are required.  It is only when I ask SCCM to check for patches
    that it sees updates are missing and installed the updates before the OS reverts when.
    Is there a way in SCCM to remove the record of what patches have been installed onto a particular server?  I tried deleted the server out of SCCM then applying the Windows Updates via the web then added the server back into SCCM and see did it pick
    up the newly installed updates on the server.
    The thing is I don't think that WindowsUpdate.log will show any failures as Windows update is showing as no more updates required.  It is just when SCCM installs that patches that the problem happens so that is what is leading me to think it is an SCCM
    problem.
    My main goal is to get the updates into the server and for it so show as complient!
    I'll check back through the even logs again.  Are they any SCCM logs that show patches failing to install and why?
    Thanks again,
    Bonemister

  • MS Office Pro 2013 Deployment through SCCM 2012 R2

    Hi Friends,
    I have deployed MS Office Pro 2013 through SCCM 2012. But from Windows 7 Client Machines It's not Installing. Noticed following error in Software Center.
    I'm testing two deployments before bring into production.
    Test Machine 1 :  Purpose = Available 
    From Software Center I have found Test Machine 1 is Status failed.
    Test Machine 2 : Purpose = Required
    From Software Center I have found Test Machine 2 is Status post due-will be retried
    The following Error code is same for both Machines.
    ====================================================
    The software change returned error code 0x87D00607(-2016410105).
    ====================================================
    Any idea please .
    Regards,Ali

    Hi,
    Check out this great guide from Ronni on how to deploy Office 2013 using Configuration Manager 2012, a good read.https://gallery.technet.microsoft.com/office/How-to-Deploying-Office-0f954e7f
    Are the content succefully deployed to all DPs?
    Regards,
    Jörgen
    -- My System Center blog ccmexec.com -- Twitter
    @ccmexec

  • GDI Error - Charts not visible in sccm 2012 reports

    I'm trying to run some default out of box reports for my sccm 2012 environment and finding that the raw data in table format is being provided but if there's any charts that should be included in the report they're not showing up. In the SSRS logs I see
    the error below:
    reportrendering!ReportServer_0-245!7e88!04/30/2015-11:09:07:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.RenderingObjectModelException: , Microsoft.ReportingServices.ReportProcessing.RenderingObjectModelException: A generic error occurred
    in GDI+. ---> System.Runtime.InteropServices.ExternalException: A generic error occurred in GDI+.
    In researching this I found similar issues out there where Hotfix-KB2823372 resolved the issue but this now looks to only be available for Windows8 as I tried to download the Hotfix and run on my server to only receive a message advising it's not applicable.
    Please advise if you've seen this error before and what you've done to resolve it.
    Jason

    What operating system are you using? That hotfix should do the trick for Windows Server 2012, see also:
    https://social.msdn.microsoft.com/Forums/sqlserver/en-US/8b47f28e-c6d5-497e-85db-d89a74fb27cd/a-generic-error-occured-in-gdi-error-ssrs-2012-sp1-on-windoes-server-2012?forum=sqlreportingservices
    For Windows Server 2008 R2, see:
    https://social.msdn.microsoft.com/Forums/sqlserver/en-US/50c071db-b4fc-4a2e-a9f4-e10e833c97d2/report-not-rendering-charts-in-pdf-a-generic-error-occurred-in-gdi?forum=sqlreportingservices
    My Blog: http://www.petervanderwoude.nl/
    Follow me on twitter: pvanderwoude

  • How to stop Application deployment in sccm 2012?

    Hi All
    If a application is wrongly deployed to wrong collection in sccm 2012
    how to stop that and where to change settings like we used to do in sccm 2007 we can
    stop it by program properties.

    You have kind of the same feature with Applications in CM2012. You can just right-click an Application, and select "Retire".
    That will change the status of the Application from "Active" to "Retired", and should prevent installations. When you've fixed the problem, you can just "Reinstate" the Application again, and everything should be back to normal.
    But I totally agree with Jason. Make sure you do the proper testing, so you won't have to do this at all :-)
    Ronni Pedersen | Microsoft MVP - ConfigMgr | Blogs:
    www.ronnipedersen.com/ and www.SCUG.dk/ | Twitter
    @ronnipedersen

  • IE11 prereqs deploy via SCCM 2012

    Hi,
    To deploy IE 11 on Windows 7, apparently you need to install 9 prereqs (see http://www.itninja.com/blog/view/how-to-package-internet-explorer-11-x64-for-windows-7-x64): 
    These prereqs are: KB2834140
    KB2670838 KB2639308 KB2533623 KB2731771
    KB2729094 KB2786081 KB2888049 KB2882822
    I don't find the prereqs in red within sccm 2012. Did check the classifications (checked them all in software update point) and did a full sync.
    Please advise howto find/deploy them (I hoped to do this via windows updates and not via seperate packages).
    J.
    Jan Hoedt

    Hi,
    I just checked the first Patch:
    http://support.microsoft.com/kb/2670838
    And there you can find the section: How to obtain this update.
    Is there is Windows Update not noted, you can't receive this Patch through Windows Updates. Consider to deploy the Patch as prerequisite as an application. Here you can find an example of installing hotfixes as prerequisite for the App-V client:
    http://scug.be/sccm/category/detection-methods/
    Detection method is VBScript. Ar you want to create a Detection method with Powershell, refer to this blog post:
    https://sccmfaq.wordpress.com/2013/03/19/sccm-2012-application-detection-with-powershell-and-code-signing/
    Hope this helps.
    www.sccmfaq.ch

Maybe you are looking for